Condition: good (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: AR200 MM SHAFTS, shaft diameter: 200 mm, overall weight: 24,000 kg, total length: 2,830 mm, roller diameter: 650 mm, total width: 2,950 mm, total height: 2,820 mm, type of input current: three-phase, operating speed: 85 mm/s, Equipment: documentation/manual, emergency stop, Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy bending chart in enclosed -Technical data: Output shafts size 200 mm - ROLLERS adjustable OPENING for the various shape of profiles. Duebjwfdbiju Ur S Sjt -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. -electric 30 Kw on the hydraulic power unit- dual voltage 380/50 -Digital position readout on the bending rolls -Manuals and schematics all available along with the machine. -Machine delivered in working condition ready for use, cleaned and greased SHIPPING ON 20”FR WEIGHT 24TON

Condition: used, knife sets for a press brake total 3 sets of upper knives (total 12 knives of 835mm long) 2 sets of lower knives. (total 8 dies of 835mm long) 1 x divisible upper beam 1 x bending block set the mentioned price of €3500 is for the entire lot together. for the dimensions of the mounting for the upper knife see image Duebu Ujwgppzer S Sst

Condition: excellent (used), Year of construction: 2000, Type of machine HFE220-3L WILA TOOLING SYSTEM WITH FUL L LENGTH HYDRAULIC CLAMPING LARGE AMOUNT OF WILA TOOLING Maximum press force 2200 Minimum usable press force 260 Beam length 3220 Distance between frames 2700 Throat depth 420 Duebu Urjv Rw Ris S Set Stroke length 350 Open height 620 Minimal increment 0.01 Positioning accuracy of the beam 0.01 Beam width 180 Table height 960 Approach speed without protection 10 Approach speed with protection 100 Maximum bending speed 10 Return speed 100 Motor power 18.5 Mains rating 20 Mains voltage 400 Mains frequency 50 Hydraulic oil capacity 295 Maximum hydraulic pressure 300 Length overall +/- 10 mm 4360 Depth overall +/- 10 mm 2660 Height overall +/- 10 mm 3200 Weight approximate 15350

Condition: ready for operation (used), net weight: 57,000 kg, with digital readout Dobu Urewbwx Tj S Seut upper and lower roll are synchronized mechanically driven Number of rolls: 4 rolls Roll capacity cold: 3100 x 50 mm Roll dia upside: 500 mm Dia under roll - side rolls: 400 mm

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Debu Ursudlymj S Sout

Condition: ready for operation (used), Sheet Metal Shear, Power Shear, Hydraulic Shear, Strojarne Piesok CNTA 3130, Used Equipment Duebu Urjwfrpho S Sst Cutting Length: 3150 mm Maximum Sheet Thickness: 16 mm Dimensions (L x H x W): 4.15 x 2.65 x 2.65 m (measured as a whole, without disassembly) Weight: 16,300 kg Manufacturer: Strojarne Piesok Model: CNTA 3130/16A Electrical Data: 400 V; 50 Hz; 33 kVA

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: Angle roll 250 mm, shaft diameter: 250 mm, roller diameter: 660 mm, type of input current: three-phase, Equipment: documentation/manual, emergency stop, Profile bending machine hydraulic -output shafts size 250 mm Equipped with traction tooling for H-beam HEB IPE UPN capacity chart see enclosed model AR250 MG brand make year 2016 Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear units each shaft. -Rollers size 660 mm adjustable opening to seat and bend the profiles -set of rolls for HEB IPE up to 300 mm - flat bar 200 mm square bar 125 mm , angle roll 200 mm legin / legout -Lateral correctors left/right side hydraulic operated in 3 directions Debu Ur Setpc Aij Sjut -Traction tool hydraulic operated tensioning for HEB-IPE – UPN bending -Set of heads for tensioning HEB – IPE - UPN beam bending on the hard side -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual operate with Digital readouts -Electric power supply 3phase Vac -60HP hydraulic power unit with high pressure multi pumps 260Bar -Working speed variable slow-fast. -Emergency and safety shut-down devices -CE quality certificate. -Service manuals and operation books along with the machine.

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. Duobu Urowd E N Es S Sjt NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: good (used), Punching machine EDEL Duobu Ur Segn Rnxj Sst - Maximum capacity: 25to. - throat: 26 cm - height: 170cm - width: 65cm - Depth: 50cm Good condition fully functional can be viewed and tried on site. Shipping also abroad. Viewing : Basically, to avoid any misunderstanding, I would like to inform you that the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguities. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in description and subject to prior sale. The value added tax is shown separately on my invoices. Shipping with forwarding agent.

Condition: ready for operation (used), total height: 3,010 mm, total length: 5,150 mm, throat depth: 250 mm, operating speed: 6 mm/s, table width: 180 mm, retraction speed: 60 mm/s, travel distance Z-axis: 200 mm, controller manufacturer: 2D Touch, power: 14 kW (19.03 HP), net weight: 12,500 kg, opening height: 400 mm, passage width: 3,680 mm, total depth: 2,320 mm, 8 axes CNC: Y1 / Y2 / X1 / X2 / R1 / R2 / Z1 / Z2 Duo backgauge Hydraulic clamping LVD tools Hydraulic bombation 2 front plate supports Debu Ur Sjwbwxye Ssut Capacity: 170 ton x 4200 mm Backgauge: CNC Locking speed: 100 mm/sec

Condition: used, Year of construction: 1996, sheet thickness steel (max.): 3 mm, working width: 2,040 mm, upper beam stroke: 300 mm, Motorized Folding Machine Manufacturer: FASTI Type 2095 – 20 – 3 Year of Manufacture: 1996 Technical Specifications Manufacturer: Fasti Type: 2095-20-3 Year of Manufacture: 1996 Duebu Ur Sowccpgj Sjt Usable Length: 2040 mm Sheet Thickness: 3 mm Upper Beam Stroke: 300 mm Dimensions: L 3.20 x W 1.00 x H 1.80 m Weight: 2.52 t Features • Central Lubrication • Double-Sided Bending Beam Drive • Bending Angle Adjustment via Potentiometer with Digital Display • Bending Rail 15 mm • Sharpening Rail 30° • Reinforcing Rail 30 mm All information is subject to change. A live demonstration is available at any time in our showroom.

Condition: ready for operation (used), Press Brake, ESPE CTO 80, Used Machine Manufacturer: ESPE Model: CTO 80 Pressing force: 80 tons Bending length: 2500 x 3 mm Table dimensions: 2500 x 160 mm Main motor power: 10 kW Dujbowfrkfou Ur S Set Weight: 6100 kg

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 4ROLL 3000X 15 MM, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, sheet thickness (max.): 15 mm, roller (top) diameter: 290 mm, roller diameter: 310 mm, overall weight: 8,500 kg, total length: 5,100 mm, total height: 1,800 mm, total width: 1,500 mm, roller (bottom) diameter: 270 mm, bending length: 3,000 mm, working length: 3,000 mm, roller length: 3,100 mm, sheet width: 3,000 mm, working width: 3,000 mm, side roll diameter: 250 mm, working height: 800 mm, warranty duration: 12 months, cone diameter: 400 mm, type of motor: three-phase motor, power: 7.35 kW (9.99 HP), Equipment: documentation/manual, emergency stop, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Dsbu Ur Sewfc S Te Ssut Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: new, Year of construction: 2025, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Djbu Uewd Emkjr S Sjut Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: good (used), Hydraulic round bending machine - Bending capacity: 5.5 mm Duobu Uovg E Inor S Sot Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: good (used), back gauge: 600 mm, sheet thickness steel (max.): 4 mm, Very nice and well-functioning machine. Cuts 0.5 - 4.0 mm thick sheets without any problems. Djbu Ur Sou Rt Stj Sout Ready to use. Transportation can be arranged.

Year of construction: 2004, Condition: good (used), 4-Hi CRM Rolling Mill Froehling Head Froehling is a very renowned brand for its reliability and robustness in the field of Rolling Mills, this 4-stage rolling mill allows precise and fast milling. Below are the features: Manufacture: - FROEHLING (Germany) - New 1969 - Upgrades 1984 and 2004 Material: - Aluminum alloys - copper - brass - low carbon steel Strip Width: - 282 (300) mm / 11.1" (11.8") Strip Thickness: - 0.15 - 1.20 mm commonly processed - 2.00 mm max thickness Coil Size: - ID - 400 mm (15.75") - OD - 1500 mm (59") Mill Speed: - 400 m/min (1312 fpm) Work Rolls: - Diameter - 130 mm (5.12") - Face - 340 mm (13.4") Back/up Rolls: - Diameter - 390 mm (5.12") - Face - 335 mm (13.4") Dobusg Ryqko Ur S Sout Drive: - 250 kW ABB DC motors / converters - New 2004 Controls: - ABB PLC - Vollmer Automatic Gauge Control - Hydraulic AGC System - Bending system Completed with: - Uncoiler - Recoiler - Belt wrapper - unloading car - Hydraulic power units - Electrical control cabinets (2002) Many sets of work rollers and backup rollers as spare We have all electrical and mechanical drawings, Software key and everything needed to reassemble and restore the function of this machine. It was dismantled after have worked until last day. If you have any questions, please let us know Sold EXW dismantled and loaded on truck. Ready for any inspection from any customer interested in. SEND US YOUR PROPOSAL IF YOU ARE INTERESTED ON THIS MACHINE, WE WILL DO OUR BEST TO HAVE A GOOD BUSINNES TOGETHER.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 850 h, Functionality: fully functional, machine/vehicle number: 14089165, Fully functional machine with a large number of punches and other accessories Djbjwhl Aasu Ur S Seut

Condition: good (used), Year of construction: 2004, Functionality: fully functional, laser power: 5,000 W, CNC laser cutting system TC L 3050 5000 Watt, with RotoLas Maximum X working area: 3000 mm Maximum Y working area: 1500 mm Maximum Z working area: 115 mm Control: Siemens Sinumerik 840D Laser power: 5000 watts Operating hours: 93,603 hours Laser beam on: 40,516 hours Maximum sheet thickness (steel): 25 mm Maximum sheet thickness (va): 20 mm Maximum sheet thickness (aluminum): Max.: 12 mm Standard Machine Equipment Machine - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Torque drive combined with linear direct drives - Enclosed beam guidance - Single-cutting-head strategy - Cooling unit - Automatic longitudinal pallet changer - 17" color touchscreen - Longitudinal conveyor belt - Ergonomic control panel with color touchscreen - Work area lighting - Positioning laser diode - Spraying system - PierceLine - FocusLine - NitroLine - PlasmaLine - Transport and assembly device TRUMPF Laser - TruFlow 3200 CO2 laser with optimized standby mode - Maintenance-free turbo radial blower - High-frequency excitation - TASC laser control system - Laser power control - Laser logbook function Cutting head - Lens cutting head with 250 mm lens - Universal quick-change system (UTI) with bus connection - LensLine with condition check - ControlLine: height control and outer sheet edge detection - Lens with RFID chip Control - SINUMERIK 840D SL control system - Easy operation - Simple workshop programming - TruTops Laser via network access - Advanced workshop programming - Fast re-production - Automatic shutdown - ContourLine - FastLine - FlyLine - Microweld - Production plan - AdjustLine - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extraction system - Machine enclosure with Makrolon panels - TruFlow 5000 with optimized standby - Lens and nozzle automation technology package (includes nozzle changer, beam alignment, and LensLine with automatic condition monitoring) - Wide cross conveyor belt with tilting container (container to the left of of the machine) - CoolLine Dsbu Urswc S Hhs S Sjut

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Duobswd Ebzju Ur S Set Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: good (used), Year of construction: 2011, Ruli folding bench 6020 / A Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Dusbuevb Nnho Ur S Sjt Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.

Condition: used, Year of construction: 2005, laser power: 4 W, Laser cutting machine FIN POWER L6-A. Very good condition, serviced every six months and major service every 4 years. Full history, service reports included. The machine is connected, can be tested, inspected. Djbjwdtrnsu Ur S Seut Specification: Model: Fin Power L6-A Year of manufacture: 2005 Power: 4 kW Working area (X x Y): 1500 x 3000 mm Working hours: 90,000 resonator worked Cutting: 20 mm black metal, up to 15 mm very clean. Stainless steel up to 12 mm. Aluminum up to 8 mm. Zinc up to 3 mm. Other: Interchangeable tables, two lenses Location: Kaunas Can be tested: Yes If you have more questions, we will be happy to answer.

Condition: good (used), DREHER reel Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent. Dsbu Uevbwlbjr S Sjut

Condition: good (used), Year of construction: 1989, Georg Noll Reel V 300 AE - max. load: 300 kg - V: 500 Hz Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be contacted at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Dsbusvbwkws Ur S Sjut Shipping with forwarding agent.

Condition: good (used), Year of construction: 1992, KEMMERICH V 300 AE reel - max. load: 300 kg - V: 50 Hz Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Duebu Uevbwk Rjr S Sst Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent.