Used waterjet cutting machines for sale (36)

Condition: used, Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, repeat accuracy: 0.2 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.2 mm, workpiece weight (max.): 1,000 kg, sheet thickness aluminum (max.): 120 mm, total length: 2,000 mm, total width: 3,000 mm, product height (max.): 120 mm, Equipment: safety light barrier, BIESSE INTERMAC PRIMUS 322 – CNC WATERJET CUTTING MACHINE For sale is a Biesse Intermac Primus 322 CNC waterjet cutting machine, manufactured in 2022. The machine has only approximately 4,500 operating hours and is equipped with a BFT 37 kW high-pressure pump. The machine is fully functional, in very good and well-maintained condition, and is immediately available. Technical Data * Manufacturer: Biesse Intermac * Model: Primus 322 * Year of manufacture: 2022 * Operating hours: approx. 4,500 hours * Configuration: 3-axis * Working area: 3,210 × 2,000 mm * Z-axis travel: 250 mm * High-pressure pump: BFT * Pump power: 37 kW * Maximum pressure: up to 4,200 bar * Max. X/Y speed: 45 m/min * Max. table load: 1,000 kg/m² * Condition: Very good / fully functional * Location: Croatia, EU * Availability: Immediately available Highlights Knjdpfxsz Drcyj Agrjb * Year 2022 * Only approx. 4,500 operating hours * BFT 37 kW high-pressure pump * 3-axis configuration * Working area 3,210 × 2,000 mm * Very well maintained * Fully functional * Immediately available * Inspection and demonstration under power possible by appointment

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: M440104, input voltage: 400 V, input current: 2 A, input frequency: 50 Hz, Plasma cutting system CMS3 Plasma Wasp 300x150 cm including Viaduct software with Nitec Fiblo 4000 extraction system Knsdpfx Agsz A Uqqorsb Inspection only by appointment! Collection only.

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. Knodpfx Agjq U Irmoreb 2 head water cutting machine CMS Tecnocut Easyline 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Kjdpfxoxwtu Te Agrenb Year of manufacture: 2010 60,000 PSI 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: good (used), Year of construction: 2013, operating hours: 18,600 h, functionality: fully functional, water pressure: 4,000 bar, Waterjet FLOW MACH 3 Year of production: 2013 Working area: 3000x2000 Working hours: 18600 Advantage of the machine DWJ - automatic compensation of the verticality of the cut Availability: 6 months Ksdpowmcmtsfx Agrjnb Location: Croatia Parity: EXW Belišće

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 15 kg, Fully functional waterjet system (manufactured circa 2001) with KUKA KR15 six-axis robot. The system operates with pure waterjet cutting (without abrasive additives) and is currently still in use for processing plastic components. Offline programming, demonstration possible. Includes KMT Streamline pump (15 HP). Complete system with automatic door opening and closing. Contact us if interested! Kodpeyl Niqjfx Agrsnb

Condition: used, Year of construction: 2021, MAXIEM P4060V pump Knsdpezw Nrnofx Agrob Table: 2000 x 4000 mm PICKUP BY SEPTEMBER 2026

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, For Sale: Flow 9XVD-55 High-Pressure Pump We are offering a Flow 9XVD-55 high-pressure pump for waterjet cutting applications. Condition: The machine is disconnected and ready for collection. Sold in its current condition. Suitable for recommissioning, refurbishment, or spare parts. Knodozrznwjpfx Agrjb Specifications: Manufacturer: Flow Model: 9XVD-55 Type: High-pressure pump for waterjet systems Many spare parts according to the photo. Complete manuals included. Inspection is possible by prior arrangement.

Condition: like new (used), Year of construction: 2021, operating hours: 480 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 260 mm, type of input current: three-phase, sheet thickness aluminum (max.): 260 mm, operating pressure: 4,150 bar, year of last overhaul: 2025, power: 22 kW (29.91 HP), Flow Mach 200 waterjet cutting system for sale A very well-maintained Flow Mach 200 waterjet cutting system from 2021 is available for sale, with extremely low operating hours of only approximately 500 hours. The machine was used exclusively for single-piece and small-batch production, not in multi-shift operation, and was regularly serviced by Flow. Technical data: – Working area approx. 4,000 × 2,000 mm – Z-axis approx. 200 mm – Flow HyPlex Prime 30 high-pressure pump – Max. pressure 4,150 bar – PASER abrasive cutting system incl. CF900 – Pivot+ 3D cutting head with active angle compensation up to 60° – UltraPierce piercing assist Knjdjy Urzijpfx Agreb – Laser edge finder – ecoFlow abrasive hand deburring system – EKOWA cutting water treatment system – Steel catcher tank – Stainless steel slats (blades) Software package: – FlowCut – FlowPath – FlowXpert – FlowNest Plus office license Supported formats: DXF, DWG, STEP, IGES, STL and others Special features: – Very low wear due to low operating hours – Complete documentation available – Operator training provided – Well-maintained overall condition – Immediately ready for operation Asking price: €115,000 net Inspection possible by appointment. More pictures and information available upon request.

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Number of heads: 2 (each with 3 axes) Table Kodpfx Aovpuvgogronb External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: used, Year of construction: 2013, operating hours: 3,000 h, functionality: unexamined, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, For sale as a complete package: Waterjet Cutting Machine STM 3015, year 2013, with computer from 2018 and 3 network dongles for IGEMS software. Working area: 3000x1500mm High-Pressure Pump Ecotron 40.37, year 2013 Water Softening System, year 2018 – like new Abrasive Backwash System, year 2013 Column Slewing Crane Abus 2t, year 2018 – like new Vacuum Lifting Device Devo-Tech, load capacity 1800kg – like new Knodjyq Rdyspfx Agrjb Various accessories and sandbags available The system was purchased at the end of 2018 and commissioned at the beginning of 2019. The waterjet system and pump had been completely overhauled by the supplier at that time. Unfortunately, the cutting system was hardly used. It only ran for a few hours per year and has not been in operation since about July 2025. The high-pressure pump is defective (leaks water and is not sealed). Both high-pressure cylinders have been replaced in recent years. Last serviced in 2025. According to the service technician, repair of the pump would cost approx. CHF 5,000 to 6,000. The crane and vacuum lifting device can also be purchased separately. Please send your offer with price expectations. In 2019, the new price for the crane and vacuum lifter was around CHF 37,000 incl. VAT. The machine can be inspected during business hours. It is still connected, but has been drained and cleaned. Please arrange appointments or submit offers via email, not by phone.

Condition: excellent (used), Year of construction: 2023, operating hours: 59 h, functionality: fully functional, machine/vehicle number: S15085092, travel distance X-axis: 1,500 mm, travel distance Y-axis: 800 mm, type of input current: three-phase, input voltage: 400 V, pressure: 2,000 bar, Waterjet cutting machine with 1500x800 mm working area, newly installed by the manufacturer in July 2023. Very little used (less than 60 hours). Buyer financing available. Ksdpfxsyprq Ej Agrenb

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, repeat accuracy: 0.05 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.05 mm, type of input current: three-phase, input voltage: 400 V, table length: 4,150 mm, table width: 2,080 mm, pressure: 4,150 bar, positioning speed: 15,000 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, For sale is a CMS Smartline 2040 waterjet cutting machine, manufactured in 2023, in excellent condition with only 200 working hours. The machine has been very lightly used and is technically and visually in top condition. Technical specifications: Knodpeydpmgjfx Agrsb Manufacturer: CMS Model: Smartline 2040 Year of manufacture: 2023 Working hours: 200 h Working area (X × Y): 4000 × 2000 mm Z-axis stroke: 250 mm Cutting head: 3-axis Pump: Easypump 30 HP (22.5 kW) Maximum pressure: 4150 bar Abrasive feeding system: 270 kg hopper CNC control: OSA Open Machine condition: Very good / like new This machine is an excellent choice for companies looking to enter waterjet cutting or expand capacity without investing in a brand-new system. The machine is supplied complete with an air compressor included in the scope of delivery.

Condition: used, Year of construction: 2010, We are offering this used Flow Mach 4 4020b Dynamic XD waterjet cutting system, manufactured in 2010. Manufacturer: Flow Model: Mach 4 4020b Dynamic XD Year of manufacture: 2010 Condition: used Machine type: waterjet cutting system Knedpfx Agozwpfhorjb Flow Mach 4 4020b waterjet cutting system | 6,000 bar HyperJet | Dynamic XD | Service 01/2026 Description: For sale is a powerful and recently serviced precision waterjet cutting system from the world market leader FLOW, model Mach 4 4020b. The system is equipped with Flow's high-end technology (6,000 bar instead of the usual 3,800 bar) and features the Dynamic XD cutting head, which automatically compensates for angular errors and enables complex 3D cuts as well as bevel cuts. A special highlight for buyers: In January 2026, a comprehensive technical service was carried out by the manufacturer (Flow Europe GmbH). This included the installation of an official drive controller retrofit kit. Since original spare controllers for this year of manufacture are often no longer available, this upgrade offers long-term spare parts security and a modernized electronic control system. A test cut was successfully performed after the conversion. Technical data: • Manufacturer: Flow International Corporation • Model: Mach 4 4020b • Year of manufacture: 2010 (Service & electronics upgrade 01/2026) • Working area: approx. 4,000 mm x 2,000 mm • Cutting head: Dynamic XD (5-axis technology with angular error correction) • Abrasive system: Flow Paser 4 • High-pressure pump: Flow HyperJet 100 (94iD) • Max. operating pressure: 6,000 bar (87,000 PSI) • Pump power: 100 HP / 75 kW • Operating hours (pump): approx. 10,409 h • Control software: FlowMaster / FlowCUT 7.0 • Connection values: 400V, 50Hz, 3 phases (120A full load) Condition & equipment: • Technical condition: Very good, ready for immediate use. • Maintenance history: Current technical service report from the manufacturer is available (January 2026). • Upgrades: New drive controllers (retrofit kit) and refurbished wiring of the C-axis. • Productivity: The 6,000 bar technology enables cuts up to 50% faster compared to standard systems. Scope of delivery: • Waterjet system Flow Mach 4 4020b • High-pressure pump HyperJet 100 • Control terminal including software • Technical acceptance protocol / service report from 01/2026 Location & inspection: 78549 Spaichingen (Germany) An inspection of the system under power is possible by prior arrangement from 15.09.2026. Sales & legal notes: The sale is exclusively in the B2B sector (commercial sale) with exclusion of any liability for defects, guarantee and warranty ("sold as is"). A return, exchange and further negotiations are excluded. All information, data and descriptions are provided to the best of our knowledge, but without guarantee of completeness, accuracy and topicality. The buyer is obliged to inspect the technical data, equipment features and the condition of the system on site before the purchase. Dismantling, loading and transport are carried out entirely by and at the expense of the buyer. If you have any questions or need more information, please send us a message or call us.

Condition: new, Year of construction: 2025, operating hours: 500 h, functionality: fully functional, Technical Specification Model: OptiMAX 80X Working area (X × Y): 4,267 × 2,032 mm Ksdpjxm Rigsfx Agronb Z-axis (height): 305 mm, motorized Machine footprint: approx. 7,925 × 3,937 mm Height: approx. 3,050 mm Weight (empty): approx. 4,150 kg Maximum material load: 1,950 kg/m² Power supply: 3-phase, 380–480 V, 50–60 Hz Noise level: < 80 dBA (during submerged cutting) Speed (X-Y): up to 8,890 mm/min Accuracy: ± 0.025 mm Repeatability: ± 0.025 mm Roundness: ± 0.076 mm Pump Type: EnduroMAX 50 HP Pressure: up to 60,000 psi (≈ 4,100 bar) Flow rate: approx. 4.5 l/min (depending on nozzle) Reliable operation, energy efficient and built for long service life Equipment & Options TiltaJet cutting head for angle compensation – delivers straight cuts without secondary finishing SRS (Solids Removal System) for automatic extraction of abrasive and particles Offered exclusively within Sweden

Condition: not inspected (used), Year of construction: 1994, operating hours: 41,564 h, functionality: unexamined, (Pictures are condition) Optional purchase: Current condition = 12.500 € Liability excluded - spare parts, service and maintenance can be offered Kodsguqucjpfx Agronb Overhauled condition = 13.500 € Check of the Intensifier 3 months warranty (not on spare and wear parts) Renewed condition = € 17,999 (refurbish) 12 months warranty (not on spare and wear parts) New pressure intensifier, new control unit, new HP pump, hydraulics cleaned and checked. we offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: like new (used), Year of construction: 2020, operating hours: 250 h, functionality: fully functional, 1.1 TECHNICAL DATA 1 x Waterjet cutting machine, NCP 4020 D 1 x FANUC 31iB d 1 x IGEMS Professional 1 x BevelJet cutting heads for AWJ abrasive waterjet cutting Kedsxgua Aopfx Agrenb 1 x Fixed cutting heads for AWJ abrasive waterjet cutting 2 x SM3000 feed systems 1 x KMT, Jetline 50 HP, 3.8 l/min, 4100 bar 1 x Cooling unit control cabinet 1 x Hose reel with spray nozzle 1 x Tool kit 1 x Machine zone safety guard 1 x PanelOne HMI operator interface "EDGECUT" 1 x Remote control for high-pressure pump 1 x Remote maintenance system 2 x Diaphragm pumps and 2 x extraction units 1 x Waste container 1000 l 1 x Pressure vessel 200 l or 2-ton abrasive online conveyor/online abrasive hopper 1 x Head protection package (zero-point measurement head 1) 1 x IGEMS 5X CAM 1 x MPG, portable handheld pendant 1 x Rotary unit SS (chuck 240 mm) Price €21,000 1.1.1 MACHINE DATA Table size (W x D): 4200 x 2275 mm - Machining area (W x D): 3980 x 2010 mm - X-axis travel 2D: 3530 mm - X-axis travel 3D: 3220 mm - Y-axis travel 2D: 2010 mm - Y-axis travel 3D: 1405 mm - Z-axis travel: 250 mm - Positioning accuracy (X/Y): +/- 0.050 mm/m - Repeatability (X/Y): +/- 0.025 mm - Rapid traverse (X-axis): 30,000 mm/min - Rapid traverse (Y): 15,000 mm/min - Rapid traverse (Z): 5,000 mm/min - Minimum distance between nozzles: 450 mm - Maximum distance between nozzles: 2,010 mm 1.2 CONNECTION DATA 1.2.1 MACHINE CONNECTION • Electrical connection: 3 x 400 V+PE, 16 A, 50 Hz • Pneumatic supply volume (incl. pressure vessel): 500 l/min • Pneumatic supply pressure: min. 6.5 bar 1.2.2 HP PUMP DATA/CONNECTION HP pump data: - KMT 50, Jetline, 4100 bar - 37 kW, circuit breaker at 400/50 Hz, 80 A CAD/CAM software: - IGEMS Professional

Condition: refurbished (used), Year of construction: 2006, table length: 3,500 mm, table width: 1,500 mm, Pictures are in current condition - two Z-axes - 1 x 45° Schnedikopf , 1 x 2D - control unit will be renewed - will be sandblasted and repainted - pump optionally available - available in 12-16 weeks after order Special features: - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer! Knsdpsnab Rzjfx Agrob

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: Kodpfxey Ecr Hj Agronb - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium Knjdpsyclvnsfx Agreb - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: refurbished (used), Year of construction: 2000, table length: 1,000 mm, table width: 1,000 mm, operating pressure: 3,800 bar, (Pictures in current state) - prepared for two cutting heads (1x pure water) - Control unit will be renewed - will be sandblasted and repainted - Pump optionally available - available after order in 12-16 weeks Ksdpfx Agenab Rlorjnb Special features: - max. two cutting heads per Z-axis - Can be individually adapted to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, CMS Smartline 2040 Demo Machine - Available in May 2026 Kjdpfozu R T Ijx Agrenb Axis-Movement: X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 150 mm included options: - 1x 5-axis cutting head with automatic taper compensation - Height sensor with anticollisionsensor - Software IGEMS - Abrasivtank and automatic abrasive doser High Pressure Pump Jetpower Evo Power consumption: 29 kW Electric connection: 400 V +/- 5% / 50 Hz Max. Pressure 4.150 bar Water flow rate: max. 2,8 ltr. / min

Condition: refurbished (used), Year of construction: 2023, operating hours: 50 h, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, warranty duration: 24 months, pump pressure: 4,000 bar, power: 30 kW (40.79 HP), OMAX OptiMAX 60X TiltaJET, 30 kW EnduroMAX pump, and TiltaJET for absolutely vertical cuts. Completely overhauled with manufacturer certification and a two-year warranty! The waterjet cutting system from the latest OMAX high-end OptiMAX series, featuring a bridge construction, represents the pinnacle of technological feasibility combined with reliability, durability, and maximum load capacity. Low-noise and low-emission operation combined with simple PC-assisted operation for precision at the touch of a button makes this series ideal for use under the harshest operating conditions in industry and trade, from single-shift operation to 24/7 operation. Features: • Closed measuring system • Digital drives • Brushless servo motors • Precision linear guides, surface-hardened • Portal (bridge) driven on both sides • Maintenance-free IntelliTRAX drive • Energy-efficient ultra-high-pressure EnduroMAX pump • Practical water level regulation as standard • Ergonomic control panel on wheels • IntelliMAX Premium control software • Highly accurate 5-axis TiltaJET kinematics • Accuracy up to ± 0.02 mm Kodpfx Agjy Umhksrenb • Software and machine components based on the latest OMAX technology With the TiltaJET swivel head, the OMAX system achieves a cutting accuracy of up to ± 0.02 mm. The swivel head automatically compensates for the cutting angle error on the cutting edge, regardless of the selected quality and cutting speed. The configuration of the waterjet cutting system can be freely selected. The system can be expanded with extensive accessories according to your cutting requirements. Please contact us and let us know your configuration requirements. Upon request, financing via leasing is possible at very attractive conditions, e.g., up to 86 months. The machine has been completely overhauled; therefore, the images may differ from the offer. A timely delivery can be arranged with INNOMAX AG.

Condition: excellent (used), Waterjet Trumpf water cutting machine for sale: It has Trumpf mechanics and new electronics: new control panel with new ac servo motors; Mach 3 water jet control software; Working table dimensions: 2.5 m x 1.25 m. There is a possibility of adding the plasma cutting technique, so the machine could be used for both plasma cutting and water cutting. The machine can be tested in our company. We also have the option of selling waterjet pumps. Knedpeyghfaefx Agrjb

Condition: refurbished (used), Year of construction: 1999, - two cutting heads - control unit is renewed - will be sandblasted and repainted - Pump optionally available Kjdpfx Agjnab Sijrjnb - available in 12-16 weeks after order Special features - individually customizable to customer requirements - 12 months or 2,000 hours warranty (not on spare and wear parts) We offer a discount when concluding a maintenance or service contract! Contact us and we will make you a customized offer!