Used punch presses with 56-90t punching force for sale (14)

Condition: used, Year of construction: 1997, Pressing force: 700 kN Throw/counterstroke: 760 mm Hub steplessly adjustable between 0 and 75 mm 48 strokes per minute at 20 mm stroke Iedezyggbspfx Al Sebb Locht e.g. 30 mm diameter in 20 mm normal steel Large support table with folding cam Assortment of tools is included in the price and can be customized Total weight of the machine approx. 2,700 kg

Condition: used, Year of construction: 1987, machine/vehicle number: 015988798960, Item No. 26303 Technical Data: Isdpezzzi Hofx Al Sjbb - Punching force: 700 kN - Punching capacity, e.g.: up to 30 mm diameter in steel, 20 mm - Or with special punching unit: up to 150 mm diameter in steel, 4.0 mm - Stroke adjustable in steps: 0 to 75 mm - Stroke rate: 13 to 48 strokes/min - Overhang: 760 mm - Installation height: 240 mm - Working height: 1040 mm - Drive: 400V / 8.5 kW - Space requirement: approx. W 750 x H 1900 x D 1750 mm - Weight: approx. 1650 kg - Includes: - Foot switch - Center-finding device - Support table with stops and scales

Condition: excellent (used), METALLKRAFT Profile Steel Shear / Punch HPS 65 DS Combined Hydraulic Profile Steel Shear and Punch with Punching Station, Notching Station, and Flat Steel, Angle Steel, and Profile Steel Shear – enables simultaneous operation at punching and profile steel shear. Punching Station - Punching Force: 65 t - Punching Capacity: max. Ø 26 x 20 / Ø 57 x 10 mm* - Throat Depth: 305 mm - Stroke Length: max. 55 mm - Number of Strokes: 25 strokes/min - Working Height: 900 mm Rod Steel Shear - Cutting Capacity Round: max. Ø 45 mm* - Cutting Capacity Square: max. 45 x 45 mm* Angle Steel Shear - Cutting Capacity L-Profile 90°: 120 x 120 x 12 mm* - Cutting Capacity L-Profile 45°: 70 x 10 mm* - Cutting Capacity U/I Profile: 120 x 58 mm - Cutting Capacity T-Profile: 90 x 11 mm - Working Height: 1,140 mm Flat Steel Shear - Cutting Capacity 90°: max. 300 x 20 / 375 x 15 mm* - Miter Cut 45°: max. FL 100 x 15 mm* - Blade Length: 380 mm - Working Height: 900 mm Notching Station - Material Thickness: max. 10 mm* - Notching Width: max. 45 mm - Notching Depth: max. 90 mm - Notching Station: 100 x 100 x 10 mm Machine Data - Motor Power: 5.5 kW | 400 V - 50 Hz - Dimensions (LxWxH): 1700 x 950 x 1880 mm - Weight (net): approx. 1,600 kg Shipping on pallet via freight forwarder possible Europe-wide. Additional machines available! Take a look at our listings. If you have any questions, feel free to contact us by message or phone: Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg Ibodpfx Aexizanjl Sjb

Condition: good (used), functionality: fully functional, actuation type: hydraulic, punching force: 70 t, punching diameter: 28 mm, throat depth: 500 mm, overall weight: 1,600 kg, Used hydraulic punching machine Brand: GEKA Model: HYD 70-SD Serial number: 3659 Throat: 500mm Cutting capacity: - L 90º: 130x130x13mm - Plate: 450x13mm - Round: 45mm - Square: 45mm Iedpjznh Shsfx Al Ssbb - Notched: 250x250x6mm Maximum punching size: 28x20mm Tonnage: 70T Includes punches and dies as shown in the photographs. *Machine has been completely inspected and is in perfect working order.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, actuation type: hydraulic, punching force: 80 t, punching diameter: 32 mm, sheet thickness (max.): 20 mm, oil tank capacity: 70 l, overall weight: 2,600 kg, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Combined Punching and Shearing Machine Tagliaferri FICEP MOD. 805N. Hydraulic. Twin-cylinder. Used, CE certified. Year of manufacture: 2000. In perfect working condition. Punching force: 800 kN. Punch stroke length: 0 to 40 mm. Maximum punch diameter: 32 mm. Maximum thickness: 20 mm. Round bar cutting: diameter 45 mm. Square bar cutting: 45 mm. Angle bar cutting at 90°: 130x130x14 mm. Angle bar cutting at 45°: 80x80x8 mm. SHEAR FOR FLATS: Blade length: 460 mm. Flat 450x15 mm. Flat 350x18 mm. Flat 200x21 mm. Ibedpfx Aloywtx Is Seb Flat 100x25 mm. At 45°: 100x100x16 mm. RECTANGULAR NOTCHER: Flats: 13 mm. Notcher width: 50 mm. Notching depth: 100 mm. Flats: 10 mm. Notcher width: 127 mm. Notching depth: 63.5 mm. Working height: 955 mm. Approximate weight: 2,500 kg. Motor power: 7.5 kW. The machine is supplied with various punches.

Condition: used, Year of construction: 1991, pressure 70.0 t punching cross-cut in cmm 27 in 20 mm Ijdpfxsxabu Ts Al Sebb punching cross-cut in cmm 32 in 14 mm work height max. 1060 mm column arm 500 mm weight of the machine ca. 1500 kg. total power requirement 7.0 kW range L-W-H 1550 x 1200 x 1950 mm good / well-maintained condition (!!) New price approx. 21.000 euros Special price on request Equipment: - electro-hydraulic hole punch, with large projection - large GEKA stop table with movable stop system - sheet metal stripper with stripper plates - stepless stroke adjustment - die base - 1x freely movable foot switch - operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: VP600 760 01, used Mubea VP 600/760 Ibsdpfxey Tihwe Al Sob Price: VP

Condition: used, functionality: fully functional, machine/vehicle number: 1028789976479, input voltage: 380 V, input frequency: 50 Hz, used Muhr & Bender Ibodpfx Aljy Tip Ie Sob Price negotiable

Condition: used, pressure: 70throat depth: 750messurements (LxWxH): ca. 900 x 2300 x 1900 Hole punch GEKA Puma 70/E-750 The positioning table is unfortunately defective; otherwise, the machine is in good used condition. Specifications: Punching force            70 t Punching capacity      27 in 20 mm Punches max. Drm.    70 in 8.0 mm or Drm.                        100 in 5.0 mm or Rectangular             50 in 8.0 mm Ijdjwrkcyopfx Al Sjbb or Rectangular             60 in 7.0 mm or Rectangular             70 in 6.0 mm Projection                     750 with -Foot switch

Condition: used, Max. Stanzkraft: 650 kN Ibodpfx Aljf Nwqls Sjb Hole e.g. a 20 mm hole in 20 mm steel For other performance data see nameplate or on request Includes assortment of punches and dies Very good condition

Condition: new, Year of construction: 2023, Sunrise punch-cutting machine IW-80SD IW-80SD Specifications tonnage 80ton punching capacity ᴓ 26x22mm/ᴓ 50x12mm discharge 510mm angle bar 150x150x12mm 90⁰ Iodpfx Asvf I Rcol Ssbb strip 460x15mm / 300x20mm Weight 2550 KG Multiple models available from stock.

Condition: new, SAHINLER HKM 65 Hydraulic Punching and Shearing Machine Applied power: 65 tons. Motor power: 5.5 kW Dimensions: 1,700 x 900 x 1,670 mm (L x W x H). Weight: Ibodpfxoggbuho Al Sob 1,600 kg PUNCHING: Punching capacity: Ø 2 mm x 20 mm thickness. Punching depth: 305 mm. Punch stroke: 55 mm. Working height: 1,030 mm. SHEARING: Plates: 300 x 20 mm. 375 x 15 mm. Blade length: 380 mm. Round bars: Ø 45 mm. Square bars: 45 mm. 90° angle profiles: 120 x 120 x 12 mm. 45° angle profiles: 70 x 70 x 10 mm NOTCHING: Maximum thickness: 10 mm. Width: 45 mm. Depth: 90 mm. Working height: 900 mm.

Condition: new, Fully automated machines for the trapezoid roll forming, in various sizes. Please, contact us in order to receive further information as well as the technical documentation. Ibedpfeyr Nkbex Al Sob

Condition: new, Combined hydraulic shear with two independent pistons, punching station with mechanical back gauge and adjustable piston stroke, notching, shearing of plates, bars, and profiles with adjustable back gauge and automatic cutting control, dual foot pedal, centralized lubrication system, work light. Machine supplied with safety guards according to CE standards, CE declaration of conformity, and operating manual. Applied power: 85 tons. Motor power: 7.5 kW Dimensions: 1,920 x 950 x 2,040 mm (L x W x H). Weight: 2,315 kg Ibedpfxeggbt Sj Al Sjb PUNCHING: Punching capacity: 33 mm Ø x 20 mm thickness. Indentation depth: 355 mm. Punch stroke: 80 mm. Working height: 1,080 mm. SHEARING: Plates: 380 x 20 mm. 480 x 15 mm. Blade length: 482 mm. Round bars: 50 mm Ø. Square bars: 50 mm. 90° angle profiles: 150 x 150 x 15 mm. 45° angle profiles: 80 x 8 mm. NOTCHING: Maximum thickness: 13 mm. Width: 52 mm. Depth: 100 mm. Working height: 940 mm.