Second-hand machinery for sale (1,819)

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2011, operating hours: 7,800 h, machine/vehicle number: WLHZ1076TZK055270, TECHNICAL DETAILS Operating Hours Operating hours: approx. 7,800 h Chassis Dimensions Undercarriage transport width: approx. 3,000 mm Chassis centerline (Taurus): approx. 2,280 mm Chassis length: approx. 4,600 mm Boom and Stick Hydraulic boom: 3,600 mm Stick length: 3,050 mm EQUIPMENT - Without bucket and without SMP - 20% wear on the running boards - Defective discs - see photos - Full hydraulic hoses present - Taurus condition commensurate with age Further technical data according to the manufacturer - without guarantee Engine Power according to ISO 9249: 95 kW / 129 hp at 1,800 rpm Engine type: Liebherr D 934 S according to Stage IIIA / Tier 3 Fuel tank capacity: 290 l Automatic idle: sensor-controlled Hydraulic system Hydraulic pump: Liebherr variable-displacement swashplate pump Flow rate: max. 300 l/min Operating pressure: max. 350 bar Pump control and regulation: Liebherr Synchron Comfort System (LSC) with electronic maximum load control, pressure cut-off, minimum lift control, demand flow control, swing circuit priority and torque control Hydraulic tank capacity: 175 l Hydraulic system capacity: max. 290 l Control system Power distribution: via control spools with integrated safety valves, simultaneous and independent operation of the chassis, swing, and attachment Equipment and swing operation: with proportional joystick levers Travel operation: with proportional foot pedal for travel drive Additional functions: via switches or proportional foot pedals Fpslhccowgm Izjqtjg Swing Drive: Liebherr swashplate oil motor with integrated Brake valve and torque control Transmission: Liebherr compact planetary gearbox Slewing ring: Liebherr, internally toothed, sealed single-row ball bearing slewing ring Slewing speed: 0 – 9.0 rpm, continuously variable Slewing torque: 42 kNm Undercarriage Drive: One Liebherr swashplate oil motor on each side of the undercarriage with brake valves acting on both sides Transmission: Liebherr compact planetary gearbox Travel speed stage I: 2.4 km/h Travel speed stage II: 5.0 km/h Tensile force: max. 175 kN Undercarriage: B60L, maintenance-free Track rollers/support rollers per side: 8 / 2 Track shoes: 3-grouser Track tension: hydraulic Dimensions Height: 3.1 m Length with folded boom: 8.7 m Undercarriage height: 1.1 m Digging depth: 6.4 m Reach at ground level: 9.7 m

Condition: reconditioned (used), operating hours: 3,680 h, Functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain TNC 426, rotational speed (max.): 12,000 rpm, Spindle replacement in 2021 - approximately 3,680 spindle hours since then (estimate) Submission of a bid obligates the buyer to pick up the machine by May 20, 2025. TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 650 mm Z-axis travel: 550 mm Spindle Speed range: max. 12,000 rpm Spindle drive power: 15 / 10 kW Max. torque: 130 Nm Tool holder: SK 40 Table Table diameter: 630 mm Max. table load: 500 kg Tool magazine Number of tool positions: 30 Max. tool length: 350 mm Feed & rapid traverse Rapid traverse (X/Y/Z): 24 m/min Fpjlhewgaz Ieccqtjg Feed rate: 20 – 10,000 mm/min Control Control: Heidenhain TNC 426 MACHINE DETAILS Space requirement: approx. 7.0 x 6.0 x 2.7 m Machine weight: 7,500 kg Total power requirement: 44 kVA Operating hours On-time: 89,186 h New spindle running time: 3,680 h (estimated) Total spindle running time: 35,845 h No chucks or vices included in the offer.

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: BVE6895, Year of construction: 2013, operating hours: 4,799 h, load capacity: 2,500 kg, lifting height: 3,300 mm, load center: 350 mm, fuel type: electric, mast type: standard, TECHNICAL DETAILS Folhccjwfg Hzeqtepg Lift capacity: 2,500 kg Load center: 350 mm Mast and forks Mast type: Standard Fork dimensions: 125 x 40 x 600 mm Mast height: 2,240 mm Lift height: 3,300 mm Platform width: 950 mm Platform height: 380 mm Fork carriage width: 1,250 mm Battery Battery voltage: 48 V Battery capacity: 620 Ah Battery year of manufacture: 2013 Tires Tire type: SE MACHINE DETAILS Overall length: 2,950 mm Overall width: 1,640 mm Forklift height: 2,400 mm Weight: 5,024 kg EQUIPMENT - Charger

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, pressing force: 400 t, distance between stands: 3,400 mm, working length: 4,050 mm, TECHNICAL DETAILS Press force: 400 t Bending length: 4,050 mm Width between columns: 3,400 mm Speed: 37.5 rpm Motor power: 37 kW Axes and control system Axes: Y1 / Y2, X, R Crowning: CNC-controlled Backgauge: CNC-controlled Crowning device: Motor-adjustable via CNC control system Tooling Upper tool: 1010/A/75°, split offset Felhcowd Ngujcqtjpg Die: Multi-V die MACHINE DETAILS Dimensions (L × W × H): 5,750 × 2,110 × 3,440 mm Weight: approx. 25,000 kg Safety and handling equipment Laser protection device: on the upper beam Sheet metal support arms: 2 units on linear guides EQUIPMENT - CNC-controlled crowning - CNC backgauge - 2 sheet support arms on linear guides - Laser protection device on the upper beam - Offset, split upper tool - Multi-V die - Y1/Y2, X, and R-axis control - Operating instructions

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, feed length X-axis: 230 mm, feed length Y-axis: 25 mm, feed length Z-axis: 150 mm, workpiece diameter (max.): 300 mm, nominal diameter: 130 mm, TECHNICAL DETAILS Control: Siemens 840 D Nominal module in steel with approx. 600 N/mm² tensile strength: 4 Largest tooth width: 25 mm Largest nominal diameter: 130 mm Largest helix angle when using 125 mm diameter cutting wheels: ± 45° Workpiece with internal gearing Nominal module in steel with approx. 600 N/mm² tensile strength: 4 mm Largest tooth width: 25 mm Largest swing diameter: 300 mm Largest inner diameter: 130 mm Tool Fslhcswc Tg Necqtepg Largest permissible cutting wheel diameter: 175 mm Cutting wheel holder – diameter: 1.5 inches Cutting wheel holder – taper in the shaping spindle: PKP 45 hollow steep taper – Bauer Travel paths Radial (X-axis): 230 mm Manual transverse column adjustment (Y-axis): ± 25 mm Adjustment range of the axial slide (Z-axis): 150 mm Workpiece table Outer diameter: 168.14 mm Bore: 65.532 mm Spindle spindle Largest stroke length (V-axis): 30 mm Spindle axis adjustment range: ± 0.25° MACHINE DETAILS Length: 6,435 mm Width: 4,560 mm Height: 4,400 mm Weight: approx. 11,000 kg

Condition: good (used), Year of construction: 1965, Functionality: fully functional, grinding wheel diameter: 350 mm, rotational speed (max.): 32 rpm, thread length: 500 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Workpiece diameter: 200 / 250 mm Thread length: 500 mm Thread pitch: 6 - 72 mm Grinding diameter: min. 1 mm Center distance: 800 mm Module: max. 8 Helix angle: 40° Relief grinding: 0.015 - 4 mm Spindle and grinding wheel Workpiece spindle speeds: 0.19 - 32 rpm Grinding wheel diameter: 275 - 350 mm Fjlewcrvishccqtspg MACHINE DETAILS Total power requirement: 11 kW Machine weight: approx. 3.6 t Space required: approx. 3.8 x 2.3 x 1.0 m EQUIPMENT - 2 dressing devices - Various accessories

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis travel: 610 mm Y-axis travel: 305 mm Z-axis travel: 520 mm Table Table size: 762 x 363 mm Max. table load: 249 kg Spindle Spindle speed: max. 8,000 rpm Spindle taper: 40 Spindle motor power: 4.1 kW Tool changer Fpolhcjwcrrdecqtjg Number of tools in magazine: 16 MACHINE DETAILS Machine weight: approx. 2.510 t Frequency: 50 Hz Technologies: Drilling/tapping, form milling (3D), milling, HSC milling

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, feed length X-axis: 140 mm, feed length Y-axis: 100 mm, feed length Z-axis: 300 mm, spindle speed (max.): 1,500 rpm, controller model: IBH CNC, TECHNICAL DETAILS Axial slide travel Z-axis: 300 mm Radial slide travel X-axis: 140 mm Cutter travel Y-axis: 100 mm Tailstock travel W-axis: 420 mm Workpiece data Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Max. workpiece length: 400 mm Milling parameters Cutter diameter: 40 - 102 mm Maximum cutter length: 230 mm Milling arbor diameter (standard): 16 - 32 mm Milling coordinates Z-axis: 100 - 400 mm X-axis: 100 - 150 mm Y-axis (milling spindle end face): 50 - 230 mm W-axis (tailstock end face): 165 - 585 mm Speeds Cutter speed B-axis: 0 – 1,500 rpm Workpiece speed C-axis: 0 – 350 rpm Feed rates X-axis: 3,500 mm/min Z-axis: 3,500 mm/min Y-axis: 4,000 mm/min W-axis: 5,500 mm/min V-axis (gantry loader): 80,000 mm/min Swivel range Shift milling head A-axis left/right: 50° / 60° MACHINE DETAILS Weight: 6 t Fjlhjwcrnxsccqtepg EQUIPMENT - CNC control IBH - Loading device - Various accessories

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, 2 machines in a double package = 1 functional + 1 spare parts rack (identical) TECHNICAL DETAILS Control: GE FANUC 15T Tool positions: 12, all driven Fpelhcowcz U Iocqteg Spindle positioning: in 2.5-degree increments Chuck: 3-jaw hydraulic chuck Automatic tool measurement: available Chip conveyor: available Cooling system: available Maintenance: regular

Condition: refurbished (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 304-1196, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, table width: 900 mm, table length: 900 mm, tank capacity: 1,200 l, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 400 mm Table and container Workpiece clamping table: 900 × 900 mm Container size: 950 × 950 mm Work container filling height: 450 mm Distance from table to electrode holder: 215 - 615 mm Loads Max. electrode weight: 50 kg Max. workpiece weight: 2,000 kg Dielectric tank capacity: 1,200 l Tool changer: 6 tools MACHINE DETAILS Dimensions (W × D × H): 2,070 × 2,850 × 2,980 mm Machine weight: 5,500 kg Electrical Specifications EDM generator: 60/120 A Fjlewf Hgnjhccqtspg EQUIPMENT - Andronic 400 control system - Menu-driven user interface - AAC-3AM process control - Integrated state-of-the-art technology - Hand control panel with handwheel - 3 cartridge filters - Integrated cooling unit - CO₂ extinguishing system - New gears, bearings, and ball screw - C-axis with positioning, rotation, and EDM functions, Heidenhain RON275 direct measuring system - New container drive with chain tensioner - Silver metallic paint finish - Hirschmann heavy-duty chuck H8.11.15/3 - Laser measurement in all axes - Services available: transport, training, commissioning

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, machine/vehicle number: 27498, feed length X-axis: 230 mm, feed length Y-axis: 170 mm, feed length Z-axis: 400 mm, gear diameter: 130 mm, spindle speed (max.): 1,200 rpm, TECHNICAL DETAILS Gear diameter: max. 130 mm Gear width: 400 mm Module: 0.5 - 3 Clamping length: max. 1,160 mm Work spindle swivel angle: ± 45° Tool change swivel angle: 90° Workpiece Largest module (in steel with approximately 600 N/mm²): 4 Largest swing diameter (not millable): 480 Smallest number of millable teeth: 3 Tool Largest hob diameter: 130 mm Largest cutter length (depending on cutter arbor diameter): 220 mm Cutter arbor diameter: 16 / 22 / 27 / 32 mm Cutter arbor taper: ISO Workpiece spindle – WS External turning range: 160 mm Bore: 63 mm Tailstock – RT Motorized travel (W-axis): 750 mm Quill stroke (hydraulic): 90 mm Axis travels X-travel: 230 mm Fpolhcewc Tduscqteg Y-travel: 170 mm Z-travel: 400 mm Spindle Cutter speed (infinitely variable): 300 – 1,200 rpm Workpiece spindle speed range: 1 – 125 rpm Control system Control system: Bosch CC 220 MACHINE DETAILS Total power requirement: 52 kW Machine weight: approx. 7.5 t Machine dimensions: approx. 4,800 × 3,800 × 2,500 mm Space required: 7.3 x 5.3 x 4.3 m Operating voltage: 380 V Control voltage: 220 V V Frequency: 50 Hz Machine power consumption: approx. 56 kVA EQUIPMENT - Bosch CC 220 CNC control - Continuously variable cutter speed control - Large travel range in all axes - High flexibility thanks to a wide range of modules

Condition: good (used), Year of construction: 2013, operating hours: 3,901 h, Functionality: fully functional, machine/vehicle number: 169527, turning diameter: 710 mm, travel distance X-axis: 690 mm, travel distance Y-axis: 230 mm, travel distance Z-axis: 2,045 mm, rotational speed (max.): 10,000 rpm, The machine can be shipped free of charge for €2,500. TECHNICAL DETAILS X-axis travel: 690 mm Y-axis travel: 230 mm Z-axis travel: 2,045 mm B-axis swivel range: up to 225°, 0.001° interpolation Fpolhswff R Sjccqteg Turning parameters Turning diameter: 710 mm Turning length: 2,000 mm Torque: 65 Nm Bar capacity: 110 mm Spindle bore: 110 mm Spindle nose: HSK-A63 Spindle speed: 38 - 2,800 rpm Speed: 50 - 10,000 rpm Counter spindle Counter spindle motor power: 22,000 W Max. counter spindle speed: 3,800 rpm Maximum counter spindle torque: 412 Nm Counter spindle bore: 80 mm Spindle drive Spindle motor power: 30,000 W Tool data Number of tool magazine slots: 80 Tool length: 400 mm MACHINE DETAILS Overall length: 7,930 mm Overall width: 2,998 mm Overall height: 3,157 mm Total weight: 16,000 kg EQUIPMENT - NC tailstock - IFS exhaust system - Door automation - Continuously adjustable speed and counter spindle speed - NC steady rest SMW SLU-Z 3.2 (clamping range Ø50–200) - In-process measurement with Renishaw possible - Documentation/Manual

Condition: ready for operation (used), Year of construction: 2012, operating hours: 21,109 h, Functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 80, Includes Indunorm UL300 pallet changer (3 pallet sizes) Submission of bid obligates the buyer to pick up the item by May 30, 2025. Disassembly and loading available for an additional charge. TECHNICAL DETAILS X-axis travel: 550 mm Y-axis travel: 1,000 mm Z-axis travel: 500 mm Axes A-axis: +300° / -120° C-axis: 360° C-axis resolution: 0.0001° Clamping table Table dimensions: 500 mm diameter Table dimensions with zero-point system: 356 mm x 356 mm Max. table load: 350 kg T-slots: 18H8 x 4 Workpiece size: 650 x 500 mm Spindle Spindle speed range: 50 – 20,000 rpm Spindle power: 18.5 kW (S6) Spindle torque: 95 Nm (S6) Tool holder: HSK63 Control Control manufacturer: Fanuc Automatic tool changer Tool holder: HSK63 Number of tool positions: 80 Indunorm pallet changer Pallet size 1 for automation: 6 pcs, 398 mm x 398 mm Preset pallet for Erowa IST: 1 pc, 398 mm x 398 mm Pallet size 2 for automation: 15 pcs, Erowa ITS115 mm Pallet size 3 for automation: 32 pcs, Erowa ITS50 mm Transfer weight including pallet: 300 kg Rapid traverse Rapid traverse X-axis: 48 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Rapid traverse A/C-axis: 18,000°/min (equivalent to 50 rpm) Feed X-axis feed: 32 m/min Y-axis feed: 40 m/min Z-axis feed: 40 m/min A-/C-axis feed: 12,000°/min (equivalent to 33.3 rpm at max. 500 kg) A-/C-axis feed: 18,000°/min (equivalent to 50 rpm) MACHINE DETAILS Width: 3,200 mm Depth: 3,550 mm Height: 2,900 mm Machine weight: 16,000 kg Operating hours On-time: 41,624 h Operating time: 21,877 h Machining time: 16,829 h Spindle hours: 21,109 h EQUIPMENT - Chip conveyor - Paper belt filter - Bed flushing system - Electric handwheel - 6 Parotec pallets, 398 mm x 398 mm - 1 Parotec pre-pallet for Erowa ITS, 398 mm x 398 mm Folhccswgcn Dsqtopg - Extensive control options for Fanuc - Machine documentation - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing system - Manual flushing gun - External coolant with 3 nozzles, 7 bar - Internal coolant, 15 bar - Coolant temperature control - Internal and external air supply A service provider can be arranged for dismantling and loading. Price approx. €11,000

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, pressing force: 152 t, working length: 3,100 mm, Valid until 10/2025 TECHNICAL DETAILS Press force: max. 1,500 kN Working length: max. 3,100 mm Diameter: 690 mm Upper beam stroke: max. 300 mm Speeds Upper beam drop speed: 100 mm/s Upper beam pressing speed: 10 mm/s Upper beam return speed: 100 mm/s Backgauge Backgauge range: 600 mm Number of backgauge axes: 6 Compressed air Compressed air consumption for sheet thickness measurement: 0.0002 m³/min at 6 bar MACHINE DETAILS Length: 4,360 mm Width: 2,120 mm Height: 2,885 mm Weight: 12,800 kg Mains voltage: 3 x 400V/50/60Hz/N/PE Slow-blow fuse: 63 A Power consumption: 22 kW EQUIPMENT - Hydraulic tool clamping (top/bottom) - CNC-controlled bending aid Fpolhccqowffkxsteg - Safety light curtain - Sheet thickness measurement

Condition: refurbished (used), Year of construction: 2012, operating hours: 38,984 h, Functionality: fully functional, machine/vehicle number: 06860001401, spindle speed (max.): 5,000 rpm, turning diameter: 320 mm, TECHNICAL DETAILS Max. swing diameter: Ø 320 mm Spindle speed: max. 5,000 rpm MACHINE DETAILS On-time: 60,009 h Spindle hours: 38,984 h Machine weight: 6,000 kg Connected load: 40 kVA EQUIPMENT - Automatic workpiece feeder - Chip conveyor - High-pressure cooling system with paper filter Further technical details according to the manufacturer - without guarantee X-stroke: 650 mm Y-stroke: +90 mm / -65 mm Z-stroke: 300 mm Max. workpiece diameter: Ø 220 mm Max. workpiece height: max. 160 mm Max. chuck diameter: Ø 260 mm Tool turret: 12 x VDI 40 Speed: 4,000 rpm Folhswcrgnsccqtjpg

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, Functionality: fully functional, temperature: 450 °C, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, HIGHLIGHTS - High temperatures - for maximum performance - Quick start - production volume can be preheated in just over an hour - Large print volume - for the high demand for high-end parts made of high-performance plastics - Precise manufacturing - Patented mechatronic X and Y handling - Greater stability with large prints - thanks to the ARGO vacuum leveling system - Better control - Self-leveling of the level, dual gears in the dual extruder, advanced sensor system - Spool temperature control - for dry polymers and filaments TECHNICAL DETAILS Extrusion temperature: 450 °C Hot chamber temperature: 180 °C Hot chamber parameters: Humidity, pressure, temperature Fpjlhccqowd Sgdoteg Polymers and composites: PEEK, ULTEM™ AM9085F, FLEX-TPU, FUNCTIONAL-NYLON, STRONG-ABS, PP, PC-LEXANT™ AMHI240F, ABS-ESD ULTRA-PLA, Carbon PEEK, and Carbon PA PRO Print Volume: 500 x 500 x 500 mm X, Y, and Z Accuracy: 10 / 25 µm Resolution Quality/Speed: 0.225 / 0.300 mm Print Speed: 5,000 mm/min Extruder Tip 2-B: 0.4 mm and 0.6 mm Extruder Tip 2-HA: 0.4 mm and 0.6 mm Extruder Tip 3-HSA: 0.4 mm and 0.6 mm MACHINE DETAILS Dimensions: 1,935 x 1,436 x 2,375 mm Weight: 1,700 kg Power Supply: 15 kVA / 400 V AC / 50 Hz DESCRIPTION - High-performance structure made of aluminum rods and steel cover - Precision ball bearing system and ground steel linear guides - Mechatronic X- and Y-axis motion with hardened C5 helical gear rack and pinion - Z-axis motion with a system of precise C6 ball screws - Moving components and aluminum supports with precision CNC machining - Vacuum system for polymer layer adhesion - Automatic build plate leveling - Security system with door lock - Integrated HT dryer with temperatures up to 120°C and automatic filament loading - Controlled chamber with forced ventilation - Pneumatic assist system Hyperspeed – optional upgrade available (€30,000)

Condition: good (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: PT25SY0113, turning length: 350 mm, turning diameter over cross slide: 620 mm, turning diameter: 390 mm, spindle speed (max.): 4,000 rpm, bar passage: 76 mm, TECHNICAL DETAILS Control: Fanuc Series 18i-TB Number of axes: 8 Machining area Swing over bed: 800 mm Swing over carriage: 620 mm Recommended turning diameter: 255 mm Turret turning diameter: 390 mm Lower turret turning diameter: 300 mm Workpiece length: 350 mm Bar capacity: 76 mm Turret Tool stations per turret: 12 Spindle Fpjlowc Sicjhccqtog Max. spindle speed: 4,000 rpm Travel paths X1 axis: 255 mm X2 axis: 190 mm Z1 axis: 800 mm Z2 axis: 900 mm Y axis: 120 mm B axis: 810 mm C1 and C2 axes: 360° MACHINE DETAILS Power consumption: 87.06 kVA Weight: 11.7 t EQUIPMENT - 2 turrets with 12 tool stations each - C-axes on both spindles - Y-axis for milling operations - Fanuc control with 8-axis capacity

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: H2X391V00906, Year of construction: 2019, operating hours: 8,340 h, load capacity: 2,000 kg, lifting height: 3,280 mm, free lift: 1,680 mm, load center: 500 mm, fuel type: gas, mast type: duplex, motor manufacturer: VW, LPG forklift in clean condition, ready for immediate use, and with a valid accident prevention certificate until April 2026. No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Drive type: LPG Load capacity: 2,000 kg Lift height: 3,280 mm Free lift: 1,680 mm Fork length: 1,200 mm Fork carriage width: 1,050 mm Load center: 500 mm Mast type: Duplex Engine and transmission Engine manufacturer: VW Fuel type: LPG engine Transmission: Hydrostatic Tires Tire condition: 100% new Front tire size: 200/50-10 Rear tire size: 18×7-8 Front tire type: SE-Natural (white, non-marking) Rear tire type: SE-Natural (white, non-marking) MACHINE DETAILS Total weight: 3,700 kg Overall length: 2,600 mm Overall height: 2,165 mm Height: 2,165 mm Hours: 8,340 h Color: Red UVV (accident prevention) inspection valid until: 04/2026 EQUIPMENT - Sideshift - 3rd and 4th valves - Pallet forks - Front work lights (2x ASW-LED) - Rear work lights (2x ASW) - Head protection - GRUL Fslhccqswc St Uetjpg - New white tires (SE-natural) - Lighting - Emissions test - 1-pedal operation

Condition: ready for operation (used), Year of construction: 2013, operating hours: 24,517 h, Functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 650 mm, controller manufacturer: Fanuc, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 48, Bidding obligates the buyer to pick up the vehicle on time by May 30, 2025. Disassembly and loading available for an additional charge. Geometry report available! TECHNICAL DETAILS X-axis travel: 1,300 mm Y-axis travel: 800 mm Z-axis travel: 650 mm Control manufacturer: Fanuc Feed rate: 24,000 mm/min Clamping table Table dimensions: 1,550 x 800 mm Spindle-to-table distance: 250 - 900 mm Table load: max. 2.5 t Workpiece size: 1,550 x 800 x 550 mm Spindle Spindle speed range: 50 - 20,000 rpm Spindle power: 18.5 kW (S6) Torque: 95 Nm (S6) Tool holder: HSK63 Number of tool positions: 48 Coolant system External coolant pressure: 7 bar Internal coolant pressure: 40 bar Accuracy Positioning accuracy: ± 0.0025 mm Repeatability: ± 0.002 mm MACHINE DETAILS Width: 3,850 mm Depth: 4,090 mm Height: 3,560 mm Machine weight: 16,000 kg On-time: 38,291 h Machining time: 20,068 h Program on-time: 24,725 h Spindle on-time: 24,517 h EQUIPMENT - Electric handwheel - Chip conveyor - Paper belt filter - Internal & external air supply - Marposs infrared sensor - Preparation for oil mist extraction - Blum tool measurement with laser - Work area flushing - Manual flushing gun Fslhccqjwgbx Ustopg - Coolant temperature control - Machine documentation - Geometry report A separate tool changer can be used for dismantling and loading. Service providers can be arranged. Price: approx. €8,000

Year of construction: 1965, Condition: refurbished (used), Functionality: fully functional, overall weight: 5,000 kg, load capacity: 5,000 kg, The crane was overhauled in 2012. TECHNICAL DETAILS Hoist designation: P 35 Lifting speed: 5 m/min FEM group: 1Cm Load capacity: 5 t Rope/chain: 16 mm Y/W dimension 1: 111 mm MACHINE DETAILS Length: 7,860 mm Felewffcnjhccqtopg Width: 2,900 mm Height: 1,000 mm Weight: 5,000 kg

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 7600-101325, load capacity: 340 kg, arm reach: 2,800 mm, pivoting range: 360 °, warranty duration: 4 months, Equipment: documentation/manual, Robot with a 4-month warranty General overhaul included: - Cleaning: Thorough cleaning of the robot panel and surface. - Oil change: Changing the oils for all six axes. - Battery replacement: All internal batteries were replaced with new batteries. - Mechanical maintenance: Gears and counterweight were inspected and serviced after repeatability and weight tests. - Electronic maintenance: Drivers, electronic boards, teach pendant, and PC components were serviced. - Polishing and repainting: The robot was polished and repainted in the original color or a custom color upon request. TECHNICAL DETAILS Reach: 2800 x 3171 mm Payload: 340 kg Control: IRC5 Axis 1 – Rotation motion: +180° to -180° Axis 2 – Arm motion: +85° to -60° Axis 3 – Arm motion: +60° to -180° Axis 4 – Wrist motion: +300° to -300° Axis 5 – Bend motion: +100° to -100° Axis 6 – Turn motion: ±360° (standard), max. ±67 revolutions Dynamics (max. rotation speed per axis) Axis 1: 75°/s Axis 2: 60°/s Axis 3: 60°/s Axis 4: 100°/s Axis 5: 100°/s Axis 6: 160° °/s Position and Path Precision Position Accuracy (AP): 0.18 mm Repeatability (RP): 0.27 mm Stabilization Time (Pst at ±0.4 mm): 0.18 s Path Accuracy (AT): 2.05 mm Path Repeatability (RT): 0.23 mm FEATURES - 6-axis industrial robot with a high payload class - Large swivel range on axis 6 with up to 67 revolutions - Precise path guidance with repeatability of less than 0.3 mm Folhccqowc T Aqetjpg - High speed of the wrist axes for fast movements - Perfectly suited for heavy-duty handling and precise motion sequences

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1602, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS No information available Further information according to the manufacturer - without guarantee X-axis: 700 mm Y-axis: 1,000 mm Z-axis: 700 mm MPe (X-axis): from 1.3 + L / 300 µm MPEp (Y-axis): from 1.3 µm Mounting holes: M10 in 200x200 grid Fslhcjwhdr Tscqtepg

Condition: good (used), Year of construction: 2008, operating hours: 60,000 h, Functionality: fully functional, turning length: 800 mm, turning diameter: 350 mm, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 100 mm, controller model: FANUC 180is-TB, TECHNICAL DETAILS Control: FANUC 180is-TB Turret Number of turrets: 2 Turret heads: 2 × 15 stations Y-axis: 100 mm (± 50 mm) Machining capacity Max. turning diameter: 350 mm Max. turning length: 800 mm (200 mm for flange machining) Spindle and bar machining Chuck size left spindle: 250 mm Chuck size right spindle: 200 mm Bar capacity left spindle: Ø 76.2 mm Bar capacity right spindle: Ø 50.8 mm Spindle speeds Left spindle speed: 4,000 rpm Right spindle speed: 4,000 rpm Rotary tool speed: 4,000 rpm Travel speeds Upper Turret X1 / Y / Z1: 24 / 12 / 30 m/min Lower turret X2 / Z2: 24 / 30 m/min Motor power Left spindle: 22 kW (30 min), 15 kW (continuous) Right spindle: 18.5 kW (30 min), 11 kW (continuous) Rotary tool: 5.5 kW (S3 25%), 3.7 kW (continuous) MACHINE DETAILS Machine height: 2,250 mm Space requirement: 4,745 × 2,932 mm Weight: 8,500 kg Feed time: 14,850 h On-time: 60,000 h EQUIPMENT - Comprehensive tool package - Tool Eye (automatic tool measurement) - Internal coolant supply (IKZ) with 24 bar pressure and Filter system - Chip conveyor - Manuals Felowc Shfohccqtjpg

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, overall weight: 13,700 kg, load capacity: 32,000 kg, TECHNICAL DETAILS Crane span: 11,650 mm 1st hoist Manufacturer: Stahl Type: AS7080-16 L1 Year of manufacture: 2012 Load capacity: 32,000 kg FEM: 2 m Lifting height: 7,000 mm 2nd hoist Manufacturer: Stahl Type: ST1005-8/2 Year of manufacture: 2013 Load capacity: 500 kg FEM: 1AM Lifting height: 8,000 mm MACHINE DETAILS Length: 12,000 mm Width: 2,200 mm Height: 1,000 mm Weight: 13,700 kg EQUIPMENT - Radio control - Connection for magnetic or vacuum beam - Inspection log book available Felhcswfd Agecqtspg

Condition: refurbished (used), Functionality: fully functional, overall weight: 11,000 kg, Year of construction: 1981, drive type: elektrisch, lifting capacity: 25,000 kg, Equipment: documentation/manual, General overhaul of the hoist in 2012 TECHNICAL DETAILS Lifting capacity: 25 t Crane span: 11,975 mm Cab span: 1,600 mm Cab hook path: 10,000 mm Number of wheels: 4 Crane wheel diameter: 500 mm Main frame Speed: 3.1 / 0.5 m/min Power: 15 / 2.5 kW Cab trolley Speed: 20 / 5 m/min Power: 1.25 / 0.32 kW Fpjlowfdncjhccqteg Crane trolley Speed: 40 / 10 m/min Power: 1.2 / 0.25 kW MACHINE DETAILS Length: 12,000 mm Width: 1,600 mm Height: 1,000 mm Weight: 11,000 kg Electrical System Drive type: electric Operating voltage: 400 V / 50 Hz Control voltage: 230 V EQUIPMENT - Load hook - Radio control - Inspection log included