Used CNC punching and nibbling machines - travel range 2000-2499mm for sale (21)

Condition: good (used), Year of construction: 2007, Bouwjaar: 2007 Incl. vele gereedschappen + Vernieuwde Compact Express automatisering met bouwjaar 2019 Gslhccjwmc Uksqtouc

Condition: excellent (used), Year of construction: 2006, operating hours: 61,090 h, Functionality: fully functional, sheet thickness steel (max.): 6 mm, table width: 2,050 mm, table length: 1,250 mm, - Control: Bosch PNC - Working area 2050x1250mm without reposition. Gsljwf Aywjhccqteuc - Working area with reposition: X-axis - no restrictions, Y-axis 1250mm. - Thickness of the workpiece: max 6.4mm - All tools indexed - rotary head. - Linear tool magazine: 17 places, 14 tools + 3 material holders. Unlimited re-equipment during machining. - Multitool option. - Multibend option. - Additional tables increasing the size of the workpiece. With the machine: - Reinforcement holder for tool preparation. - Key for dismantling tools located in the linear magazine. - Tool for emergency release of dies from the head. - Locating pins for setting the lower head. Description: Machine in very good technical condition. Serviced on an ongoing basis by qualified internal personnel and manufacturer service. In constant use. Possibility to inspect the machine during operation at any time. Machine available for sale from June 2025

Condition: ready for operation (used), Year of construction: 1996, Available immediately from location: CNC punching and nibbling machine Trumpf Type TC 500 R SM 1306 Year of manufacture 1996 Golhccjwlgurjqtjuc Operating hours 81,000 CNC control Sinumerik 840 D TrumagraphCC 220 S Working area 2535 x 1280 mm Punching force 22 tons Sheet thickness up to 8 mm Workpiece weight up to 150 kg Maximum positioning speed (simultaneous X-Y axes) 108 m/min Rotation angle of the C-axis continuously 360 degrees Maximum stroke rate 900 strokes/min Maximum number of tools 18 Automation components: Standard version CheetMaster 1306 Truma Grip Truma Sort L Chip conveyor with container Equipment : Multi-tool control Thread forming function Marking function Slotting function 3 clamps Low-scratch machining Small parts sensor, parts chute Part blow-out device Pneumatic repositioning cylinder Soft punch Memory expansion to 256 KB Vibration-damped installation Supplied tools: 6-way multi-tool 12-way multi-tool Price: €9,500 plus VAT ex-works

Condition: good (used), Year of construction: 2012, •Euromac MTX Flex 12 1500/22/ 2500 •A lot of tools included. •Year of construction 2012 •Multitool 6 •Multitool 10 •CE Safety features •Table extensions for 4 meters •Vacuum system • X-axis 2500mm with positioning 10000mm •Y-axis 1500mm MTX flex 12 • 3 Autoindex stations D - 360° pragrammable • 3 Fixed stations D • 6 Fixed stations B with ACTIVE Die System • Direct DRIVE System •Automatic repositioning of the hydraulic plate clamps. • Standard 2 plate clamps • Simple system for loading plates. • Automatic lubrication of the multi-tool and tools • Movable control console • Machine software TPT (TOP PUNCH TOUCH) with 21.5 inch LED touch screen. • Table with brushes • Folding table at the front (L 850) • External cooling system Gjlewk Ntujhccqtouc • UPS system: protects the console PC against voltage drops and guarantees up to 30 minutes of power supply in the event of a power interruption. • Die holder 2 x D, 1 x C, 2 x and 1 x Adapter from B to A • Punch adapter: D/B, D/C, B/A. • Operating instructions (paper and electronic). • Preparation for online service (internet connection required). • USB memory stick. • Electrical preparation for the loading and unloading system.

Condition: used, Year of construction: 1990, Functionality: limited functionality, machine/vehicle number: 9088, punching force: 25 t, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, overall weight: 16,000 kg, input current: 63 A, input voltage: 380 V, cutting force: 25 t, Machine is used, price after inspection Gjlhccqswl Iwhetsuc

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements width 4413 Measurements depth 5860 Measurements height 2263 Machine weight 14500 Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement Gelhccev D Rznsqtsuc X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm General Data Measurements width 4413 Measurements depth 5860 Measurements height 2263 Machine weight 14500 Control Unit Brand BOSCHERT Main Drive Maximum sheet thickness 6 mm Movement X-Axis Movement 3430 mm Y-Axis Movement 2670 mm Z-Axis Movement 1500 mm Additional Equipment 8 Station Automatic Tool Change tooling, system TRUMPF Rotation with stepless Index (360°) of all tools Up to 64 Tools available (with Revotools) Very short time for tool change All standard Trumpf tools may be used Clamp system for automatic material handling with 2 clamps Stepless programmable clamp positioning Automatic repositioning of the clamps with 2 sheet hold downs for sheets up to 9999 mm This BOSCHERT Multipunch 1500 x 3000 was manufactured in 2011. A robust CNC punching machine, it offers precision and efficiency for your sheet metal operations. Ideal for a variety of punching applications, ensuring consistent performance. Contact us for more information. Application Types Punching

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis Guelhcsv Ic Tqocqtec 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: 3MM599011A, Euromac CNC-controlled punching machine type ZX 1000/30 CNC Technical specifications: Year of manufacture 2000 Punching force 30 tons Working area 1250+N x 1000 mm X-axis travel (+repositioning) 1250 mm Y-axis travel 1000 mm X-axis speed 40 m/min Y-axis speed 30 m/min Combined X+Y speed 50 m/min Stroke 30 mm Max. stroke rate (in 1 mm increments, 1 mm sheet thickness) 730 rpm Max. stroke rate (in 25 mm increments, 1 mm sheet thickness) 300 rpm Table height 980 mm Motor power 4 kW Oil tank 115 l Height 4000 mm Width without light barriers 2800 mm Golhcceuk Dqfjqtsuc Length without light barriers 2800 mm Weight 4800 kg With 6-way multi-tool holder MTE6 (max. diameter 24 mm) 2 clamping claws Table size 1970 x 2260 mm Foot pedal 2 additional single die holders Max. punching force 300 kN Automatic repositioning up to 10,000 mm Max. punching diameter for single tool 88.9 mm Max. punching diameter of multi-tool holder MTE6: 24 mm diameter Max. opening of clamping claws 7 mm Transport width: 2350 mm Operating instructions in German and English CE declaration available

Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, punching force: 28 t, workpiece length (max.): 1,000 mm, workpiece width (max.): 2,000 mm, TECHNICAL DETAILS Sheet width: 2,000 mm Sheet length: 1,000 mm Punching force: 28 t MACHINE DETAILS Gjlhcowf Ibtecqtouc Machine weight: approx. 11,000 kg EQUIPMENT - Various tools

Condition: good (used), Functionality: fully functional, Nibbling sheet thickness 4 mm, slotting 4 mm, lamella cutting 3 mm, folding 3 mm, beading 3 mm, flanging 1.5 to 2 mm, strokes per minute 600/900/1500, throat 41" motor power 1.5 kW, Gslhccjvr Dx Aeqtsuc voltage 380 volts length 1800 mm, width 900 mm, height 1900 mm, weight 1500 kg motor power 1.5 kW,

Condition: excellent (used), Year of construction: 2010, operating hours: 4,400 h, Functionality: fully functional, punching force: 30 t, sheet thickness steel (max.): 6 mm, Punching Capacity: 30 tons​ Maximum Sheet Size: 1525 mm x 4980 mm​ Maximum Sheet Thickness: 6.35 mm​ X-Axis Travel Length: 2490 ± 10 mm​ Y-Axis Travel Length: 1525 ± 10 mm​ Maximum Traverse Speed: 105 m/min​ Punch Speed (25 mm between holes): 360 hits/min​ Nibbling Speed: 600 hits/min​ Tool Stations: 40, including 2 auto-index stations (D Type)​ Maximum Punching Diameter: 114.3 mm​ Turret Rotating Speed: 40 rpm​ Auto-Index Rotating Speed: 50 rpm​ Gelhjv Uq Sujccqteuc Ram Stroke Distance: 0–31 mm (hydraulic servo axis)​ Working Table: Brush type​ Number of Sheet Clamps: 3​ Machine Dimensions (L x W x H): 4905 mm x 5140 mm x 2380 mm​ Net Weight: Approximately 13,500 kg​ CNC Controller: FANUC Oi-PF with 5+1 controllable axes​ Punching Accuracy: ±0.1 mm​ Included: Bunch of tools Tool sharpenner Cam sofware and computer Atlas copco screwcompressor GA7FF Verify the accuracy of the information with the seller

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand TRUMPF Main Drive Punching force 220 kN Movement X-Axis Movement 3100 mm Y-Axis Movement 1600 mm This Trumpf Trupunch 5000 Punching machine was manufactured in the year 2007. It is equipped with a Trumpf control unit. The machine has a punching force of 220 kN. Application Types Gujlhcswbauwjcqtsc Punching

Condition: excellent (used), Year of construction: 2000, Used Trumpf Trumatic 200r CNC punch press for sale: Brand: TRUMPF Model: TRUMATIC 200 Year: 2000 Type: CNC Punching Machine Control:Bosch CC 220 Punching force (ton) 16.5 Movement X-axis (mm) 80 m/min Movement Y-axis (mm) 55 m/min Gelhccqevq N Ndoteuc Simultaneous positioning speed (X+Y m/min) 97 m/min Max. sheet thickness (mm) 6.4 Tool changing time (sec.) 1.5-6.5 s Number of tool places 15 Max. hole diameter (mm) 76.2Max. workpiece weight (kg) 150 Max. stroke rate (1/min) 420 Picture of punch samples: 6mm aluminium

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 041066, Trumpf CNC-controlled punching machine type Trumatic 500 Working area: 3085 x 1650 mm Max. punching force: 220 kN, Max. sheet thickness: 8 mm, Max. stroke rate: 750/min, Max. workpiece weight: 230 kg, Max. punching diameter: 76 mm, Connected load: 19 kVA, Control system: Bosch Trumagraph CC 20S, Weight: 13.8 t, With storage interfaces for forward/reverse storage, retractable clamps, multi-tool control, air-sprung setup, chip conveyor with container, TrumaLift SheetMaster 1600 FMC thread forming, Guelhccqjv Nv Sijtoc regularly serviced

Condition: good (used), Year of construction: 1990, Functionality: fully functional, punching force: 22 t, sheet thickness steel (max.): 6 mm, Murata Weidemann C 2000 Gusljtulrfjhccqtoc

Year of construction: 2000, Condition: good (used), Spare part for Sheetmaster and Gripp Trumpf medium format TC 600L / TC 500R, suction plate complete , with suckers, suction plate, valves, controllers, gearboxes, motors Y / X axis with gearbox and rotator, light barriers, claws,air cylinders etc. see pictures Geljh Dixgehccqtouc

Condition: good (used), Year of construction: 1998, Boschert TRI1500 x 2500 CNC Z TRUMPF quick tool change system Punching force: 280 kN (28 tons) Travel x- 2500 mm (repositioning up to 9999 mm) y- 1560 mm Punching arm throat: 1850 mm 3 punching heads tool system Trumpf Gr1-3(105mm) head 1-3 Control Labod 32040 graphic control / workshop programmable Max. Sheet thickness: 6 mm(clamp opening)/10 mm Lifting height: 40 mm up and down steplessly adjustable. Table width left + right: 2600 mm each Table depth: 1800 mm table height: 900 mm total width: 5282 mm total depth: 4500 mm total height: 2080 mm Driving power: 20 kVA Machine weight: 17.800 kg Hydraulic filling: 80 l Color: Blue /Light gray RAL7035 Machine year 1998 Golhcoizctcjcqtouc good condition / overhauled., New safety light barriers New memory module with USB/SD card and LAN with accessories

Condition: ready for operation (used), Year of construction: 2011, Main Drive Guslhcov Adgnjcqtjc Number of axis 2 Movement X-Axis Movement 2500 Y-Axis Movement 1250 Additional Equipment Max. Hit Rate: Punching with 20 mm Pitch: Up to 375 strokes per minute. / Nibbling with 1 mm Pitch: Up to 1000 strokes per minute. /Marking: Up to 2000 strokes per minute. This 2-axis Euromac MTX FLEX12 was manufactured in 2011. Ideal for precision CNC punching, this machine maintains robust functionality despite its usage. If you are looking to get high-quality punching capabilities, consider the Euromac MTX FLEX12 machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 1999, Condition: used, pressure - t plate thickness - mm no. of strokes - Hub/min total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Guslhjp Symcsccqtoc

Condition: refurbished (used), Year of construction: 2013, machine/vehicle number: MR310693610, Technical data Pressing force 300 kN (30 t) Tools A, B, C, D Number of stations in taret 6 (size D) Number of rotary stations 3 Max. number of tools 60 of which rotary - continuously 360° 30 Max. punch diameter (size D)- separate 81 mm Maximum punch diameter in XMTE4M magazine 4 x 31.7 mm Maximum punch diameter in XMTE6M 6 x 24.0 mm Maximum punch diameter in XMTE10M 2 x 24, 8 x 12.7 mm Y-axis working range (with Multitool) 1300 mm Y-axis working range (single tool) 1250 mm X-axis working range (with Multitool) 2550 mm Automatic repositioning of X-axis limbs up to 10,000 mm Max. Y-axis positioning speed 60 m/min. Max. positioning speed in X axis 60 m/min. Axis acceleration 10 m/sec² Number of strokes- ( 1.0mm increment ) 1000/min ( 20mm step ) 450/min Number of strokes during marking 10 - 2000/min Sheet thickness (mm) 0,5 - 10 Work table size for X=1250mm 2370 x 4500 mm Tool or Multitool change time approx. 2 seconds Tool change time in Multitool approx. 0.6 seconds Max. opening of the jaws 11 mm Max. stroke 30 mm Power supply 3 x 400 V/50 Hz Machine power 8.5 kW Average power consumption Energy 4,5 kW Maximum sheet weight (kg) 200 kg Maximum positioning speed can be used up to a sheet weight of 80 kg. Gslhccqeqlah Njtsuc Speed reduction to 50% for weights from 100 to 200 kg. Pneumatic connection 6 ± 1 bar Air consumption 0,1 Nm≥/h Oil filling for hydraulic system - hydraulic oil 135 l Overall machine dimensions - Y x X x Z 3630x4840x1900 Weight 7800 kg Operating time 28 966 h. Actual working time 14 190 h. List of tools: 10 local multiool single rectangular tool rectangle ultra light fully guided Number of rotary tools 3 pcs Fully functional, very good condition, Serviced by authorized service, complete after service inspection, possibility to test and demonstrate the machine in operation, loading can be arranged, further information on request

Year of construction: 2000, Condition: defective spare-parts repository (used), Sell spare parts for a Trumpf TC 600L ram control new / used Gujlsffyg Hehccqtoc die acceptance punch holder drive motors this is only a small extract of what I have. Please just ask what you need.