Used Press brakes with 150-199t bending force for sale (172)

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, pressing force: 165 t, distance between stands: 3,100 mm, bending length: 4,050 mm, TECHNICAL DETAILS Axes: R, X, Y2, Y1 Control: ESA KVARA Lhjlhcdwowi I Hdeyeg Working range Bending length: 4,050 mm Pressure: 165 t Design: 500 mm Stand spacing: 3,100 mm Installation height: 450 mm Upper beam travel: 250 mm Speeds Entry speed: 100 mm/s Working speed: 9 mm/s Drive Motor power: 15 kW MACHINE DETAILS Dimensions (L × W × H): 4,500 × 1,750 × 3,000 mm Weight: 14,000 kg EQUIPMENT - With new upper ram 4,000 mm - With new upper ram 835 mm - 4,000 mm new lower die with 75 mm V-type - 835 mm new lower die with 80 mm V-type

Condition: used, Year of construction: 1992, Functionality: fully functional, total height: 3,852,626 mm, AMADA PRESS BRAKE HFBO 4M125T YEAR 1992 MACHINES DISCONNECTED Ljlhcdwswdw Ugeyehg SOLD AS IS WITHOUT WARRANTY

Condition: used, Year of construction: 2019, total height: 2,900 mm, total width: 1,900 mm, total length: 4,100 mm, Weight: 10.920 kg Price: On request - Number of axes: 6 - Power: 175.0ton - Max. working width: 3050mm - Year: 2019 - Documentation available: Yes - CE mark available: Yes - Serial number: 73331915853 - Control: CNC - Transport dimensions: 4100mm x 1900mm x 2900mm (l x w x h) - Transport weight [kg]: 10920kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lelswmnzvohcdwyehg Bram van Summeren

Condition: good (used), Year of construction: 2007, Gebruikte 3 meter Safan E Brake Type: E Brake 100 3100 TS1 Capaciteit: 3100 x 100 ton Safan Touch screen besturing Y1, Y2 en X CNC gestuurd Lhjlhcdwewmcz Djysg Handmatige R as (voorzijde) Euro/Amada gereedschapopspanning Bouwjaar: 2007 1 set gereedschap inbegrepen

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW Lholhcdotqqr Rewyog weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) Lelod Srk Sshcdwyjhg 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: good (used), Year of construction: 2008, pressing force: 160 t, overall weight: 11,000 kg, bending length: 4,100 mm, distance between side stands: 3,550 mm, cylinder stroke: 290 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Lhelhcdwowi Sktjyog Weight: 11,000 kg

Condition: excellent (used), Year of construction: 1993, technical data on request Lhjlevygm Eehcdwyjg

Condition: used, Year of construction: 2012, operating hours: 25,000 h, total height: 2,750 mm, total width: 2,350 mm, total length: 5,250 mm, Weight: 12.500 kg Price: On request - Distance between columns: 3600mm - Number of axes: 4 - Back gauge: 0 - Power: 175.0ton - Max. working width: 4050mm - Year: 2012 - Documentation available: No - CE mark available: Yes - Serial number: 7336127126 Lhelhcdwswmf Efsyjg - Operating hours: 25000 - Control: CNC - Motor power: 18.5kW - Transport dimensions: 5250mm x 2350mm x 2750mm (l x w x h) - Transport weight [kg]: 12500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1986, Bending length 3600 mm Max. pressure 175 ton Length of stroke 400 mm Working radius in frames 300 mm Controlled on 4 axis (Y1-Y2-X-R) Controlled crowning Control: Cybelec ModEva 10 S Lholjv Hy U Nehcdwyjg Equipped with: Pneumatic clamping of upper & lower tools Various tools (7-12-16-24-32 mm) lower tools & 4 pcs. upper tools

Condition: new, The AHK V CNC series models fulfill the most demanding requirements for modern press brakes according to European standards. These models were developed with advanced design technology and built on modern production lines resulting in superior quality, precision and reliability. All AHK V CNC series models feature a DELEM graphical touchscreen that provides efficient CNC programming tools and control over the entire bending process. Various back gauge options are available so these press brakes easily can be adapted for a wide spectrum of requirements. Lelevn Nnushcdwyjhg

Year of construction: 2024, Condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software Lslhcdwod Tpadeyjhg - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: K 3945, pressing force: 170 t, bending length: 3,100 mm, stroke distance: 300 mm, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Connected power: 11 kW Working range Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Lslewlqa Sehcdwyohg Weight: 12,500 kg Top beam stop time: < 94 ms

Condition: excellent (used), Year of construction: 2008, pressing force: 150 t, overall weight: 10,800 kg, working length: 3,100 mm, nominal pressure: 1,500 N, working range: 3,100 mm, For sale: 1 used High quality / very good condition German made Bystronic Pr150 3metre x 150ton cnc pressbrake With goose neck upper tooling that is 2 years old Bystronic Beyeler PR 150×3100 Make: Bystronic Model: PR 150 Pressure Reference Year / new: 2008 Total axis: 7 – 5axis back gauge X R Z1 Z2 X1 Free standing no pit required Lheljh Eyxkehcdwyeg Capacity / bed size / tonnage: 3metre x 3100mm x 1500ton Cnc control: Cybelec Modeva 10s Fully serviced with Bystronic uk – as attached per photo General Information: Model: PR 150 x 3100 Manufactured: 2008 Specification: Working length mm 3100 press force kN 1500 stroke mm 315 Rapid Approach mm/s 190 Working speed mm/s 10 Return speed mm/s 150 Weight kg 10800 Electrical values: Power of main motor kW 11 Total Connected Load kW 15 Operating voltage V AC 3ph 400 Frequency Hz 50 Control Voltage v DC 24 Nominal Current Fuse A 35 Pneumatic: Max operating pressure bar 8 Hydraulic: Max accumulator pressure bar 300 Complete with used tooling yet we can also quote for brand new tooling to fit this machine to produce your steel products. Delivery to your factory and installation complete with training with your operators available

Condition: used, Year of construction: 1977, total height: 2,550 mm, total width: 1,900 mm, total length: 3,300 mm, Weight: 8.000 kg Price: On request - Distance between columns: 2600mm - Back gauge: 1 - Power: 110.0ton - Max. working width: 3100mm - Year: 1977 - Documentation available: No - Serial number: 12092 - Control: Conventional Lelewiu Dvjhcdwyshg - Motor power: 7.5kW - Transport dimensions: 3300mm x 1900mm x 2550mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2006, pressure 175 t chamfer lenght 3550 mm distance between columns 3050 mm throat 405 mm stroke 400 mm ram stroke speed 140 mm/sec working feed 10 mm/sec Lholhcdwjwgn Dqjyjg return speed 180 mm/sec work height max. 900 mm oil volume 350 l Control CYBELEC ModEva 10S total power requirement 25,5 kW weight of the machine ca. 13800 kg dimensions 5980 x 3590 x 3220 mm Furnishing: - DELEM CNC control DA65 - controlled axes: Y1 + Y2 + X + R - Electric crowning device WILA, controlled via CNC - Electric back stop, travel range 600 mm - hydr. Upper tool holder WILA - hydr. WILA lower tool holder - front laser protection device FIESSLER - 5x manually adjustable stop fingers, foldable - 2x front support arms “sliding system” - side + back protection device - Hand and foot controls - Operation manual ?

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3216-CNC Delem DA-58T Specifications - Nominal pressure: 1600 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 11.0 kW - Length: 3300 mm - Width: 1650 mm - Height: 2500 mm - Weight: 8700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Ljlhcdsgih Iuowyshg Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Year of construction: 2024, operating hours: 32 h, Condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm Lhslsdx Nlushcdwyeg stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, 8-Axis NIDEOGRAPHY CNC ELECTROMECHANICAL CENTRING UPPER AND LOWER HYDRAULIC LOCKING WILA TYPE RAM OPENING 500mm RAM STROKE 300mm Lhjlowh Rwishcdwyog

Condition: used, Year of construction: 2000, pressure 170 t chamfer lenght 4100 mm distance between columns 3750 mm Stroke beam 215 mm 380 mm Lhjlhcewglllodwyog 350 mm Quick speed,inspeed 120 mm/sec bendingspeed 0-10 mm/sec opening speed 120 mm/sec X-axes 600 mm 200 mm Z1+Z2 axes controlled by cnc 0.-3600 mm Number of working hours 29150 h length 4800 mm width 2200 mm height 2650 mm weight 16450 kg total power requirement 25 kW weight of the machine ca. 16,5 t dimensions of the machine ca. 5x2,5x3 m

Condition: used, Year of construction: 2000, total height: 2,400 mm, total width: 2,200 mm, total length: 3,500 mm, Weight: 11.000 kg Price: On request Controlled axes: Y1-Y2 + X-R-Z1-Z2 + I+Crowning Wila Hydraulic clamping Angle-measurement - Distance between columns: 2800mm - Number of axes: 6 - Throat depth: 410mm - Back gauge: 1 - Power: 130.0ton - Max. working width: 3050mm - Year: 2000 - Documentation available: Yes - CE mark available: Yes Lhslhowf Uxlscdwyjg - Serial number: 885669 - Control: CNC - Transport dimensions: 3500mm x 2200mm x 2400mm (l x w x h) - Transport weight [kg]: 11000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: good (used), Year of construction: 1995, Functionality: fully functional, pressing force: 200 t, throat depth: 250 mm, overall weight: 20,000 kg, bending length: 4,100 mm, Hämmerle BM200-4100. The machine was dismantled at the old factory in 2023, but was never reassembled and put into operation at the new one. Since then, the machine has been in storage. All accessories and documentation are included. The machine can be inspected at any time and is immediately available for loading. Lholhcewa S Dnedwyeg All data is included in the pictures...

Condition: used, Year of construction: 2003, Pressure 225 t Bending length 4050 mm Column width 3550 mm Control system: CYBELEC DNC 1200PS ECO Oil volume 400 l Total power requirement 22 kW Machine weight approx. 18,100 kg Accessories/Equipment: - 2 bending aids in front of the machine - Light barrier in front of the machine - Foot switch Lhelhov Uz Hcscdwysg - CYBELEC DNC 1200PS ECO - Parking space for bending aids on the left - 2 stop fingers - Crowning - Die shift - EHT tool holder top and bottom - Controlled axes: y1, y2, x, R, z1, z2 - Set of bending tools

Year of construction: 2024, operating hours: 33 h, Condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Ljlhcodx Nm Tsdwyohg Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Condition: good (used), Year of construction: 2003, pressing force: 160 t, overall weight: 14,000 kg, Pressure 160 t folding length 3050 mm Ljlhcdwjp R Hcwjyehg column width 2550 mm Control CYBELEC VisiTouch Pac ram stroke 300 mm weight 14000 kg