Used Round rolling machines motor-driven 0 - 2,9mm thickness for sale
4
Motorized three roll round bending machine make SCHMIDT & GRUHLE
Type UBBDH 2x1250, Machine # 753
Technical data:
Working length 1250 mm
bending capacity 2,0 mm
roll diameter 80 mm
driving power 2,5 kW
Catbqqpn2q
weight 520 kg
with
- foot switch
- swing-out top roll
- rear roller infeed by handwheel
- wire grooves in lower and rear roller
used
6
sheet width 2030 mm
plate thickness 1,5 mm
pre-bending ja
roll diameter 95/88 mm
switchgear cabinet 850 x 600 x 1500 mm
total power requirement 1,5 kW
weight of the machine ca. 1,9 t
dimensions of the machine ca. 3,2 x 1 x 1,3 m
CE signed
Function: ready for operation
Video available on our website.
Electric 380 Volt
Emergency wire switch
Ltc2mjjf
Mot. 4-roller bender with two-roller drive (top / bottom), Sergi
Screen control in rollable control panel selectable in manual +
semi-au...
2
1020x1,0 mm, wire laying grooves, folding groove, swing-out upper beam
upper beam, back roll adjustable via toothed rack
Machine will be repaired, checked and cleaned by a specialist and is then fully functional. Test run will be carried out.
Colour. blue
Machine weight: 140 kg
Space requirement: 1300 x 700 x 1400
Roll diameter: 53 mm
Coslkp9
9
plate width 1860 mm
plate thickness 0,75 mm
bending speed 2,75 mm/min
adjustment range - vertical 40 mm
work height max. 1025 mm
total power requirement 1,5 / 2,2 kW
Yr3azs
weight of the machine ca. 2300 kg
dimensions of the machine ca. 900 x 2500 x 1600 mm
Reflektor slip bending roll
Right and left rotation via foot switch Roller diameter: 65 mm Max. bending length: 1250 mm Max. sheet thickness: 1.25 mm steel Speed setting via potentiometer
Poy9xzsg
Machine can be visited and tested in Dortmund.
materiallength of 1540mm possible.
Thickness at 400 N/mm² with 1,75mm
Vt02wztn
Please let me know, if you have any questions.
Best regards
4
Motorized three roll bending machine make STÖLTING
Technical data:
Bending length 1040 mm
bending thickness 2,0 mm
roll diameter 90 mm
with
- swing-out upper roll
- R.+L. run
- foot switch
used
Qi9bf
7
sheet width 1860 mm
plate thickness 0,75 mm
pre-bending ja
upper roll diameter 68 mm
work speed 2 m/min
length of draw-in 500 mm
diameter of lower rolls ca. 90 mm
weight of the machine ca. 700 kg
dimensions of the machine ca. 2,45 x 0,7 x 1,1 m
Video available on our website.
B7zqdstl
Electric 380 Volt
Special reflector plate bending machine with automatic curve control
(templates) with asymetric roller arrangement, hydraulic rear roll adjustment
and three roll drive. During automatic ...
2
Sheet Metal Bending Machine, motorised, Rolls length 2120 mm, Rolls Ø 120 mm, Capacitiy 2mm, feed by handwheel, foot pedal, dimension 3100x1000x1350 mm, weight ca. 2000 kgs
Crqoajz
7
Quality used 3metre Picot powered bending rolls for sale complete with nc control
Bending length 3100mm / 3metre x 2mm thickness
Top roll Dia 150
Max thickness bending 2mm and pre bending 1.5mm
New / Year 2009
Can be tested under power with your sheet steel
3 ROLLS
SYMMETRICAL ROLL BENDING MACHINE
STANDARD EQUIPMENTS
100% Hydraulic
3 Rolls driven
Double pitch plate bending
machine
No lamination
Wide opening between the
rolls
Perfect prebended edges
Easy cone rolling
No pit
Calibration of p...
4
A used four-roll round bending machine in good condition.
Machining length 1050mm
bending capacity in steel up to 400N/mm² 2,5m
Roll diameter 80mm
Foot pedal
right/left rotation
Device for conical bending
Bre38fbkbk
swivel bearing
dimensions of the machine LxWxH 1,6x1,0x1,3m
Weight 1,2Tons
2
gr. working width: 1100 mm
for sheet thickness (steel sheet) up to approx.: 1 mm
electr. drive: 380 V, 0,75 kW
Tifskdjjg
space requirement: 2330 x 600 x 1140 mm
weight: 357
8
Manual swing bending machine make FASTI type 206/5-20-2,0
machine # 7126061, year of construction 1971
with additional motorized upper beam adjustment
technical data:
max. working length 2040 mm
max. sheet thickness 2,0 mm
stroke of the upper beam 200 mm
adjustability of lower and bending beam 80 mm
weight approx. 1830 kg
B9wjci9tla
outer dimensions L x W x H
with
- counterweight
- motorized upper beam adjustment (without fct.)
- foot switch
used
electrics slightly in need of overhaul
7
Offer 16343
Technical data:
- max. working width 2040 mm
Vvctzm
- max. material thickness 1.0 mm
- roller diameter top + bottom roller 80 mm
- rubberized back roller 88 mm
- stroke 70 mm
- back roll + bottom roll adjustable for conical bending
- top and bottom roll motor driven
- working speed right + left 6 m/min
- drive 400 V / 1,1 kW
- space requirement approx. W 2650 x H 1050 x D 650 mm
- weight approx. 660 kg
- with: - asymmetric roller arrangement
- man.rear roller adjustment
- bendin...
7
Technical data:
Working length: 2540 mm
bending capacity: 2,5 mm
Control: manual
dimensions (length x width x height): approx. 3700 x 1650 x 1650 mm
weight: approx. 3,5 to
accessories:
Tool
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.
880rzam
5
sheet roller PICOT electric motor
working lenght 2 meters
with 2 rollers more
B23jcgyh2l
6
SN 1530
Hvpcpn9
still under power
3
Hydraulic two roll round bending machine
Guaranteed performances:
Sheet metal strength bending with material 260 N/mm² yield strength: 2 mm
Plate thickness bending with material AISI 304-316 stainless steel: 1,5 mm
Cycle time per part: 15 seconds
Wdsm92ih
Technical data:
Working length: 1000 mm
Installed power: 5,5 kW
Rolling speed: 7 m/min
immediately available ex works!
5
CNC round bending machine make FASTI type 104-20-1
Machine # 9314008 Year of construction 1993
technical data:
working length 2040 mm
sheet thickness 1,0 mm
roll diameter 80 mm
motor power 1,1 kW
weight approx. 660 kg
with
- CNC control
- 4 differently cambered rolls
for extremely precise pipe production
Yu38jnfh
used, in good condition
3
Technical data: 2020 x 2.0 mm
max.sheet thickness: 2 mm
Bb8d0cxm
Weight: 1,2 to.
9
working width: 3000 mm
diameter top roller: 50 mm
N0ycz
Diameter bottom rollers: 65 mm
9
Maker: Lisse
Model: B60/30
Max width: 600mm
Max thickness: 3mm
Power:2.2kW
Beel82jt3w
4
Technical data:
-maximum working width 2040 mm
-maximum thickness at 40 kg / mm² strength 1.25 mm
-Upper roller diameter 59 mm
-Lower + rear roller diameter 77 mm
-Work speed 4 / 8 m / min
-Drive: 400 V / 0.7 / 1.0 kW
7snmjave3
-with:-Prebending
-Conical bending device
-3 reel, Drahteinlegerille
-Upper roller with Groove - space B approx. 2700 x H 1150 x D 700 mm
-Weight approx. 1000 kg
5
Rounding machine from the well-known manufacturer Schwartmanns
machine is electric with forward and reverse
bending length a little over 2m
Bsnehq3lyy
material 0,75mm steel aluminium - more
upper roller can be swung out
Machine works perfectly
was only unused for a very long time and has very light rust which we like to remove yet
Test of course possible
2
Type: Heat 70/153
(Steel) thickness: 1.2 mm
Length: 1530 mm
ID: 4139
Year of constr.: 2017
Incl. 1-stage main propulsion, control and safety device after current CENorm,.
stepless adjustment of the rear roller with position indicator, angle adjustable
87fg8ueks
Rear roller,
incl. frame, from commercial length 1030 mm incl. crowned
machined and hardened rollers.
incl. upper surfaces Enge hären tête rolls
15
The automatic machine for endless gutters, is in function and works without problems.
The machine uses a PLC and a control panel with 10 adjustable programs of individual quantity and length to be stored and "manual mode".
The machine uses three motors: a scissor drive motor, a traction roller drive motor and a reducer drive motor.
B03fcwpkga
8
Machine is not used at all.
Machine was stocked in the production hall of the customer.
Machine only needs to be clean and start to use.
Ga7wqssl
8
sheet width 1550 mm
plate thickness 2,0 mm
roll diam. toproll 90,0 mm
engine output 1,5 kW
bending speed 6,0 m/min
weight 580 kg
range L-W-H 2130 x 1200 x 700 mm
Furnishing:
- motor-driven asymmetrical 3-roll round bending machine
- hardened rollers
- manual folding warehouse for quick removal of the workpiece
- Profile inlets i.d. Rollers
L9jjf87d
- Double foot switch for R / L run and emergency stop button
- Conical bending device
- rear roller manually adjustable
- electr. Safety device
6
OFFER 21105
Technical data:
- max. working width 2040 mm
- max. sheet thickness 1,5 mm
- roll diameter 90 mm
- stroke of the back roller 120 mm
- working speed 6 m/min
- drive - brake motor 400 V / 1,5 kW
Btmjjjunsk
- space requirement approx. W 2850 x D 800 x H 1200 mm
- weight approx. 0,8 t
- with - asymmetrical roller arrangement,
- bending
- rear roller inclinable for conical bending
- extended roller ends for mounting of profile rollers
- right + left rotation
- E. foot switch
1
bending length: 1050sheet thickness: 0.8upper roll diameter: 46
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
- Digital re...
10
sheet width 1070 mm
plate thickness 2,0 mm
distance between columns 1100 mm
diameter of upper rolls 76 mm
total power requirement 1,1 KW
Oc3mp
weight of the machine ca. 0,37 t
dimensions of the machine ca. 1,8 x 0,8 x 1,3 mm
Sheet bending machine with:
- Capacity 1050 x 2 mm
- High strength wrought iron rollers with SAE 1050 certificate.
- Upper and lower roller driven, feed roller without drive
- Footswitch
- conical bending
- Swiveling top roller
- Safety device emergency leash
- Documentat...
9
sheet width 1070
plate thickness 3,5 mm
diameter of upper rolls 95 mm
pre-bending capacity 2,3 mm
voltage 400 V
total power requirement 1,1 KW
weight of the machine ca. 370 kg
dimensions of the machine ca. 1,35 x 0,76 x 1,25 m
Basic equipment:
Capacity 1250 x 2.5 mm
Conical bending
Swiveling top roller
Safety device emergency leash
B770hczrih
documentation
Option:
driven rear roller
hardened rollers
digital display
10
Technical data:
-Manufacturer: Binmak
-Type MR1050x75
-Country of origin: Turkey
-Year of manufacture: approx. 2020
-working area approx. 1000x2mm
-with foot pedal
-Electric
-own weight approx. 300Kg
-roller diameter: approx. 75mm
Befjx7z2yu
9
sheet width 1270 mm
plate thickness 2,5 mm
roll length 1270 mm
roll diam. toproll 90,0 mm
Lmpijo09
engine output 1,1 kW
bending speed 6,0 m/min
weight 520 kg
Furnishing:
- motor-driven asymmetrical 3-roll round bending machine
- hardened rollers
- manual folding warehouse for quick removal of the workpiece
- Profile inlets i.d. Rollers
- Double foot switch for R / L run and emergency stop button
- Conical bending device
- rear roller manually adjustable
- electr. Safety device
5
- Capacity 1070 x 2 mm
- Conical rolling
- Removable top roller
- Foot control
B0dq390lzk
- Emergency stop
- documentation
- 400V
1
sheet thickness: 1.8bending length: 1050upper roll diameter: 70
Bdf7pze7c7
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor EU...
9
sheet width 1050 mm
plate thickness 2,0 mm
roll length 1050 mm
roll diam. toproll 75,0 mm
engine output 1,5 kW
Bn0zip079k
weight 385 kg
range L-W-H 1610 x 700 x 1160 mm
Furnishing:
- motor-driven asymmetrical 3-roller bending machine
- hardened rollers
- Manual folding storage for quick removal of the workpiece
- Profile inlets i.d. rolls
- Double foot switch for R/L run and emergency stop button
- rear roller manually adjustable
- electr. safety device
- Profile grooves : 4/6/10 mm
3
OSTAS PLATE ROLLER
TYPE SBM 2070 x 95
- Capacity 2070 x 1,5 mm
- Conical roller
- Swivelling top roller
- Electric adjustable back roller
- Foot-operated
Yigyw
- Emergency stop
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
1
bending length: 1050sheet thickness: 1upper roll diameter: 56
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor
Bdf7wup8pu
- D...
9
sheet width 1300 mm
plate thickness 1,50 mm
roll length 1250 mm
roll diam. toproll 75,0 mm
weight 400 kg
range L-W-H 1850 x 700 x 1160 mm
Bobce2ngjm
Furnishing:
- motor-driven asymmetrical 3-roller bending machine
- manual delivery of the rolls
- Profile grooves
- Foot control
3
OSTAS PLATE ROLLER
TYPE SBM 2070 x 95
- Capacity 2070 x 1,5 mm
- Conical roller
- Swivelling top roller
- Foot-operated
- Emergency stop
Vt0qpy
- Documentations
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
1
sheet thickness: 2.5bending length: 1550upper roll diameter: 90
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor EURO 750,--
-...
5
SAY-MAK PLATE ROLLER
TYPE MSM 2080 x 100
- Conical rollers
- Swivelling top roller
- Brake motor
- Foot-operated
- Emergency stop
Hgrcxqv
- Weight 850 kg
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
1
sheet thickness: 1.8bending length: 2050upper roll diameter: 95
T9d8wbsr
Technical specifications:
- Cast iron body
- By manuel or motorised (optional) bending
- Opening top roll to side after bending for taking out the material easily
- Cone bending device
- Movement of the back and bottom rolls up and down manually with hand wheel
- Portable control panel in order to control material from required locations with foot pedal
- In acccordance with CE norms.
Options:
- Back roll with motor EURO...
3
AYEL-TECH PLATE ROLLER
TYPE IR 1050 x 46
- Capacity 1050 x 0,8 mm
- Conical rolling
- Brake motor
Bqjdvdzq
- Foot-operated
- Emergency stop
- 400V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
1