Used section steel shears over 80t punching power for sale (45)

Condition: excellent (used), Year of construction: 1987, Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear Gtolhcsyupxwodwxow -Manufacturer: Peddinghaus, hydraulic profile steel shear type Peddiworker 400 -Drive: hydraulic -Pressure force: 40 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, pipe notching -Dimensions: 870/660/H1630 mm -Weight: 860 kg

Condition: used, Combined profile steel shear and hole punch GEKA type HYD 80 / Hydracrop 80/A Machine. No. 9566 Year of construction approx. 2000 Punching force 80 ton. throat 300 mm Punching up to Ø 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm Square shears 45 x 45 mm Round material shears Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Fence with el. stroke release 500 mm - Work table with stop for punching device 550 x 380 mm - Working height of the punching device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height of rectangular notcher 930 mm - approx. 21 different punching tools Gtelerz Tutohcdwxsw - operating instructions - Original paint finish, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons. very good condition

Condition: ready for operation (used), hole punhing press: pressure 100 t output 40 in 22 mm L-beam 160 x 16.0 mm square edge steel 50.0 mm round bar steel 50.0 mm flat steel 600 x 15.0 / 400 x 20.0 mm throat 610 mm engine output 8.5 kW weight of the machine ca. 3150 kg range L-W-H ca. 2200 x 1400 x 1830 mm - in checked conditions - machinevideo - ?v=oV49fdNM8dg Equipment: - Robust electro-hydraulic profile steel shear - Punching station with punch quick-change device and die holder - Includes large support table with movable stop - Continuous stroke adjustment with jog/setup mode - Triangular notching station with support table Golhoxn Tydjcdwxetw - Bar, profile, and angle steel shear - Flat steel station with support and guide table - Various punches and dies (drawer cabinet) - 1x electric contact length stop - 2x freely movable foot switches - Operating instructions (PDF)

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m Gjlhcdweu Icl Rjxetw hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Operation by foot switch Some accessories available. *

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 49600 € 947.36 € 130 to 600 mm 5 2 50x18 mm 80 mm 600x18 (max. 600x20 mit D mm 120x120x11 (max. 150x150x mm 45/40 mm 130x12 mm 250x12 mm 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station Gelhcsynnggedwxjtw bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien Gtelhcsynmrbsdwxjw 35600 € 679.96 € 110 to 610 mm 5 40/20 bzw. 28/28 mm 80 mm 28 1/min 600x15 / 400x20 mm 152x152x13 mm 50 mm 13x52x90 mm 9 kW 2690 mm 1400 mm 2200 mm 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 970,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Spanien 72800 € Gslhcoynmq Rodwxotw 1375.92 € 165 to 610 mm 5 40/30 bzw. 34/34 mm 110 mm 31 1/min 750x20 / 400x30 mm 205x205x18 mm 60 mm 16x58x110 mm 15 kW 2950 mm 1600 mm 2200 mm 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION "KIT" € 970,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Further available models of HYD 165 series: model S € 55.200,-- as model SD but 510 mm gap weight 5.200 kg (sample photos) WE HAVE MORE THAN 700 REFERENCES!

Condition: used, functionality: fully functional, Year of construction: 2004, Used Geka profile steel shear Type: HYD 110 SD Capacity: 100 tons 3-way punching head Punching table is equipped with NC-controlled stop table 2 x 2 meter roller conveyors Year of manufacture: 2004 Gtsljyfmt Tshcdwxsw

Condition: used, Year of construction: 2007, GEKA HYD 110 Gtjlhcdeynkduowxew

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Holes 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: approx. 5000 kg Gtelef Nwn Uohcdwxow

Condition: used, Technical details: Gtelhexu Dx Djcdwxjw dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: ready for operation (used), functionality: fully functional, Hydraulic profile and bar shear, profile shear, Peddinghaus 210/25s, used machine Manufacturer: Peddinghaus Model: 210/25s Gtjlhcdwewcqmaoxsw Punching capacity: Ø40 mm hole in 25 mm thick plate

Condition: good (used), Year of construction: 2011, You are bidding on: a branded folding press from a very reputable and well-known manufacturer – Geka. Device features: - Folding press - Rail bends cleanly – test possible - Degree indicator - Bending length: slightly over 2 m - Sheet thickness: 2 mm (iron sheet; greater possible for aluminum, zinc, etc.) - Machine bends pneumatically via foot pedal - 15 cm front rail removable, leaving a 1 cm rail (desired by many; together 2.5 cm) Guillotine shear HT 200 or Schröder electric guillotine shear, 2 m – 2.5 mm ... manual lever shears also optionally available. Gjlsyk H E Tehcdwxetw Important: Optionally, you can find and purchase a wide range of machinery and machine accessories (e.g., different rails, depth stops) for sheet metal and steel processing in our shop. This includes folding presses, guillotine shears, drill presses, slip rollers, slitting and profiling machines, and corresponding accessories (beading devices, round rollers for gutter production, back gauge, etc.), as well as additional hand tools and spare parts from many top manufacturers. Feel free to contact me with any questions. You will receive an invoice with VAT shown separately. Free loading is available – weight approx. 850 kg. Inspection and testing are possible and encouraged by prior telephone appointment. Payment in cash upon collection. Benefit from our experience and expertise—we will be happy to advise you. Collection by the buyer (or a shipping company commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways.

Condition: good (used), Reinforcing steel shear, reinforcing steel cutting machine, construction steel shear, profile shear, punch, punching machine -Manufacturer: L & L, steel shear with chassis -Type: FM1001 -Drive: 1.5 kW motor -Cutting width: 20 mm -Cutting height: 100 mm -Dimensions: 1160/500/H765 mm Gtolhcoyay Elsdwxsw -Weight: 334 kg

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Gtoljrxflcehcdwxew

Condition: used, Year of construction: 1985, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt Gtslovg R Rzjhcdwxsw

Condition: excellent (used), Profile steel shear, profile shear, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shear -Manufacturer: Mubea, hydraulic profile steel shear type HIW1000 -Drive: hydraulic -Pressure force: 100 tons -Equipment: large support table with stops for die-cutting, various stamps and dies -Production: Punching, shearing, cutting, notching Gtslhcdwsx Dclbjxow -Dimensions: 2360/760/H1800 mm -Weight: 2700 kg

Condition: used, pressure 80.0 t punching cross-cut in cmm 31.0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7.5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher Gsloxabi Rohcdwxstw - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Golhceu Ickyedwxstw Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Technical details: throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t Gtelhcdwsxcay Hsxsw -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 24200 € 464.64 € 80 to 750 mm 40x14 mm 40 1/min 9 kW 1700 mm 1300 mm 2050 mm Gtjljwirf Rjhcdwxow 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 17800 € 341.76 € 80 to 510 mm 40x14 mm 40 1/min Gtelhewirf Dscdwxew 9 kW 1700 mm 1300 mm 2050 mm 1715 kg hydraulic drive table with gauge user manual in GERMAN and ENGLISH CNC options on request We have a big stock of punches and dies for immediate dispatch WE HAVE MORE THAN 700 REFERENCES!

Condition: excellent (used), functionality: fully functional, Year of construction: 1995, overall weight: 2,950 kg, total length: 1,980 mm, total width: 1,020 mm, total height: 2,060 mm, input voltage: 400 V, Equipment: documentation/manual, type plate available, Peddinghaus Peddimax 801 Very fine and well maintained ironworker with accessories. Capacities: Flatbar: Gtjlhcsvw Dfajdwxsw 500 x 18 mm. 400 x 20 mm. 300 x 22 mm. Punching: Ø31 mm in 25 mm. Ø65 mm in 12 mm. Ø95 mm in 8.5 mm. Ø100 mm in 7.5 mm. See photos for other capacities. Motor: 400 V, 7.5 kW Transport can be arranged. ENGLISH: Peddinghaus Peddimax 801 Very fine and well maintained ironworker with accessories. Capacities: Flatbar: 500 x 18 mm. 400 x 20 mm. 300x22mm Punching: Ø31mm in 25mm. Ø65mm in 12mm. Ø95mm in 8.5mm. Ø100mm in 7.5mm. See photos for more capacities. Motor: 400V 7.5kW Transport can be arranged.

Condition: good (used), functionality: fully functional, Year of construction: 1960, machine/vehicle number: G1 077, control type: manual, degree of automation: manual, actuation type: manual, controller manufacturer: peddinghaus, working width: 340 mm, cutting range flat at 90° (Y-axis): 120 mm, cutting range square steel at 90°: 50 mm, cutting range round steel at 45°: 55 mm, cutting range angle steel at 45° (Y-axis): 100 mm, sheet thickness (max.): 28 mm, working height: 800 mm, overall weight: 3,800 kg, total length: 1,000 mm, total width: 2,400 mm, total height: 2,400 mm, power: 7.5 kW (10.20 HP), input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, electrical contact length stop, foot remote control, well-functioning machine with many tools Gtjlhjx H R Raecdwxsw

Condition: new, messurements (LxWxH): 2040x950x2180weight approx.: 2940total power requirements: 11square steel bar: 50throat depth: 355round steel: 55flat steel shear: 380x25notching (strenght x width x depth): 13x60x100punching - round: 34x26 oder 55x16 oder 110x5angle iron cutting 90° or 45°: 150x150x16 oder 80x10pressure: 115 With two cylinders, hydraulic 5 workstations: - Hole punching station - Notching station, as well as flat steel, bar, and angle steel cutting stations. In the following configuration: - With two cylinders, hydraulic - Support table at the notching and flat steel stations with stops - Hydraulic and electrical components from renowned manufacturers - Support table at the hole punching station with scales and stops - Support table at the notching and flat steel stations with stops - Electric length stop 1000 mm for automatic cut-off trigger - Switch for setup and working operation - Technical documentation - Lighting - 2 foot pedals - CE execution SPECIFICATIONS DESCRIPTION / VALUE Model: HKM 115 Punching Force: 115 tons Stroke: 355 mm Stroke: 80 mm Strokes per minute (at 20 mm stroke): 25 Max Sheet Thickness: Ø 34 x 26 mm Working Height: 935 mm Cutting Capacity: 600 x 15 mm, 380 x 25 mm Angle Steel 45° (1 leg): 80 x 80 x 10 mm Angle Steel 90°: 150 x 150 x 16 mm Knife Length: 610 mm Round: 55 mm Square: 50 mm Material Thickness: 13 mm Width: 2,040 mm Depth: 950 mm Motor Power: 11.0 kW Voltage: 400 V 50 Hz Gslhsh Hvniocdwxstw Height: 2,180 mm Weight: 2,920 kg