Used Folding machines / bending brakes (motor-driven) 0-1999mm for sale (33)

Condition: new, Year of construction: 2025, Brand new Schechtl segment bending machine Sheet width: 1250 mm Steel sheet thickness: 1.25 mm Aluminum sheet thickness: 2.00 mm Stainless steel sheet thickness: 0.8 mm Color: blue Bwe Iaswd Eako Unxijl Space required: 1730 x 740 x 1180 mm Machine weight: 290 kg without roller shear Opening width: 90 mm Bending angle: 150 mm

Condition: good (used), Year of construction: 2011, Ruli folding bench 6020 / A Good condition, fully functional, can be inspected and tested on site. Shipping also abroad. Inspection: Basically, I would like to point out that the item can be inspected and tested under power before purchase in order to avoid misunderstandings. Please ask questions before buying to avoid any ambiguities. For general questions or to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale reserved. VAT is shown separately on my invoices. Shipping with forwarding agent. Bo Ia Unxovb Nnhsijwl

Condition: like new (used), Motorized swivel bending machine 1520x6 mm Back stop Central lubrication Bo Ia Uevuhrrenxiswl

Condition: used, sheet length: 1050width: 800heigth: 1400sheet thickness: 3 Bws Iaovaar Io Unxiol Bending Machine - Dimensions (L x W x H): approx. 210 cm x 80 cm x 140 cm - Working width: approx. 105 cm

Condition: reconditioned (used), Year of construction: 2015, sheet thickness steel (max.): 3 mm, working width: 600 mm, total length: 600 mm, Refurbished RAS MiniBendCenter 79.05 Technical data Board length: 50–600 mm Board width: 40–600 mm Sheet thickness max. (400 N/mm²) depending on tool: 3.0 mm Upper cheek stroke max: 500 mm Smallest leg height Standard value depends on tool: 5 mm x s Maximum leg height: 127 mm Weight of bending cell: 10 tons Weight of cladding and electrics: approx. 2027 kg Weight of machine elements: approx. 945 kg Motor operation: 400V, 50/60 Hz, 3-Ph Year of construction: 2015 Condition: refurbished—good used condition Bending cell: Automatic sheet thickness adjustment Automatic tool clamping Blank scanner Main manipulator: 3 servo motors for X,Y,Z 1 servo motor for lower rotary axis + separate drive for rotary axis Double sheet detection Tool changer: 3 servo motors for X,Y,Z 1 pneum. Swivel drive for rotary axis Tool gripper Tool magazine on 2 levels Automatic tool clamping in the tool magazine Cladding: Bending cell front and rear Movable control panel: 18" Touch & More control unit Pallet station: Roller conveyors and heavy-duty chain conveyors 1 space for new pallets (parts that are being processed) 1 space for "pallet in process" 2 spaces for finished pallets (empty or with remaining quantity) Additional equipment: Bwe Iov N Eutsa Unxijl Intelligent charging robot Combined camera-scanner system Analysis software Transfer table, Sauerfeld (52x9mm) suction cup series (7x20mm) Conveyor curve belt with 6 connection stations Cladding finished part output Complete tool set RAS CAM-Office software incl. SolidWorks license and maintenance contract for 2 years This high-quality used RAS MiniBendCenter 79.05 offers you proven quality at an attractive price and is available directly from the manufacturer. It is a fully automatic bending center specifically designed for the efficient processing of small parts. It comes with a manufacturer's warranty, maintenance included, and the latest software version. With advanced technology such as automatic sheet thickness adjustment, an intelligent loading robot, and a powerful control system, it optimizes your production and reduces costs. Benefit from high flexibility and fast amortization through automated processes and versatile configuration.

Condition: used, Year of construction: 2010, Manual bending machine Schroder with segmented tools. Bs Iasv Tk Ums Unxiowl Specification: Manufacturer: Schroder Model: ASK II 1000/2.0 Year of manufacture: 2010 Made in: Germany Working length: 1000 mm Bending thickness: 2.0 mm Weight: 380 kg If you have any further questions, we will be happy to answer them.

Condition: new, Year of construction: 2025, bending angle: 135 °, sheet thickness aluminum (max.): 1 mm, working width: 1,300 mm, total height: 1,900 mm, warranty duration: 12 months, total width: 1,900 mm, opening width: 105 mm, insertion depth: 1,250 mm, Equipment: documentation/manual, Assembly is not required - ready to use immediately. Specifications: Working length: 8040mm Working width: 1300mm Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.7mm/0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3400kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic fighting and bending Electric cutting device Bwe Ia Unxjgmhxasijl Precise servo drive adding device Semir or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & WiFi communication Offset angle adjustment December-CHRISTMAS DISCOUNT

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: 1235, bending angle: 90 °, sheet thickness steel (max.): 4 mm, sheet thickness aluminum (max.): 6 mm, working width: 1,200 mm, total length: 1,685 mm, type of input current: three-phase, outer dimension width: 1,262 mm, outer dimension length: 1,685 mm, opening width: 400 mm, controller manufacturer: Germany Beckhoff, workpiece length (max.): 1,200 mm, workpiece height (max.): 430 mm, nominal power (apparent): 3 kVA, number of spindles: 6, - Germany Beckhoff System, Closed-loop control, High bending accuracy. - Italy GIVI MEASURE precision linear encoder. -High strength machine body after heat-treated. - No need to change bending tool. - The Blank-holder tool can automatically change the length basic on the sheet length. - Multilateral automatic continuous bending. -Automatic programming software can finish all the process Bs Ia Uswfwkqsnxijwl - Automatically check and optimize. the process -All servo motor control, fast and energy saving - Automatically control pressing force.

Condition: used, Year of construction: 2004, Technical details: plate width: 2540 mm plate thickness: 2,5 mm distance between columns: 2830 mm stroke adjustment: 30 mm bending angle max.: 0 - 180 ° bending radius min.: 1,25 mm daylight opening: Oberwange: 200 mm back gauge - adjustable: kein Hinteranschlag mm height over floor: 900 mm total power requirement: 2,0 kW weight of the machine ca.: 1,7 t dimension machine xH: 3,35 x 1,0 x 1,5 m Hydraulic Folding Machine, electronically controlled. -max. sheet thickness at 400 N/mm² 2,5 mm according to manufacturer -smallest permissible bending radius 1.25 x sheet thickness -opening of the upper beam max. 200mm (motor driven) -bending trough is manually operated -Lower beam is fixed -operated by pushbutton / double foot switch Be Ijv S Aiyja Unxiewl *

Condition: ready for operation (used), Year of construction: 2009, Jorns CNC 600 Bj Iov Rhg Uoa Unxijwl

Condition: new, OMEC 3-roll mechanical symmetrical rolling calender. New "CE. Made in Italy. Ready for delivery except sold. General characteristics. Working envelope : mm 1330. Be Ia Unegyk Susxijwl Upper and lower roller diameter : mm 90. Side rollers diameter : mm 95. Thickness : mm 2 - 2.5 - 3. (1.5 X D 3 X D 5 X D ). Hardening of rollers HRC : 55/60 depth 2 mm. Installed power : Kw 1.1. Dimensions : mm 800 x 2100 x h 1100. Weight : Kg 490 The FX3.2 series distinguishes MECHANICAL CALENDERS with 3 ASYMMETRIC ROLLERS with simple complete invitation. The side roller (bending roller) is motorized as standard, for raising and lowering. The rotation of the rollers in these machines is applied to the upper and lower rollers by a self-braking motor coupled with a gearbox. Manual clamping of the sheet ,is performed by the bottom roller ,by a straight up-and-down motion using a bearing system. All machines are equipped with a movable control pedal board as standard. The simple operation of these machines, combined with the roll hardening and conical device, is an excellent compromise between quality and economy of processing. Equipped with the machine Optionals supplied : Front conical device. No. 01 digital display for side roller position.

Year of construction: 1972, Condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW Bws Iaey Np As Unxisl rear stop: ja mm weight: 2200 kg space needed: 800x3000x1380 mm

Year of construction: 2016, Condition: good (used), Heavy duty version with motorized clamping of the workpiece With foot operation Heavy, compact welded construction Powerful drive by Lenzemotors With continuous sharp bending rail With manual adjustment of the bending angle as standard Particularly low maintenance Clamping of the workpiece is motorized S models with segmented upper tools SH-models with high, segmented goad foot tools Available on request Other models Standard tools hardened Sharp bending tool and bending bar hardened Segmented tools and bending bar hardened Segmented tools and bending bar hardened Working width max. 1520 mm Clearance between upper and lower beam max. 110 mm Segmentaufteilung 25-30-35-40-45-50-75-100-150-220-250-500 mm Dimensions and weights length approx. 2150 mm width/depth approx. 700 mm height approx. 1100 mm weight approx. 810 kg Bending capacity 400 N/mm² 1.75 mm VA steel 1.3 mm Explanation VA steel For bending stainless steel the optional hardening of the tools is required Aluminum 2.1 mm Bs Ia Uenwnhxenxiowl Paint damage and traces of use present

Condition: good (used), Year of construction: 1978, machine/vehicle number: 2410578051, Offer 23316 Technical data: - max. working width 1540 mm - max. material thickness at 40 kg / mm² strength 2.5 mm - Bending angle setting preselectable 0 - 135 ° - Maximum opening width / stroke of the upper beam 200 mm Bwe Iaeri Rl Io Unxijl - Height adjustability - of the bending beam 100 mm - of the lower beam 100 mm - Upper beam drive 400 V / 0.75 kW - Bending beam drive 400 V / 1.5 kW - Accessories - separate control cabinet with control panel - Back gauge with stop depth up to 500 mm - Space requirement with back gauge W 2350 x H 1450 x D 1250 mm - Space required for control cabinet W 600 x H 850 x D 500 mm - Weight approx. 1800 kg

Condition: used, Swivel bending machine KRAMER type A-Maut. II 1000 No. 48 287 Year of construction 1990 effective length 1060 mm max. sheet thickness 3.75 mm Stroke of upper beam 180 mm Adjustability of the folding beam 60 mm Backgauge 480 mm Drive power of folding beam drive 4 kW Drive power upper beam drive 1.5 kW Mains connection 400 Volt, 50 Hz - Manual and semi-automatic control - Angle adjustment via angle preselection disk - one-piece pointing rail 135° - backgauge with hand crank adjustment and simple measuring scale - Continuous fence rail - Electric foot switch, 3-position Space requirement L x W x H 2200 x 1350 x 1500 mm Weight approx. 2.3 tons Bj Iefnabyoa Unxijwl good condition

Condition: excellent (used), Year of construction: 2018, operating hours: 1,200 h, Functionality: fully functional, machine/vehicle number: P4 3816 LEAN, PANEL BENDER P4Lean-3816 MAX. PANEL LENGTH FOLDING 3850MM LS1 UPPER BLADE Bo Iasvx T Sre Unxijwl LI LOWER BLADE SiX System Control and Management NS Standard Clamping Foot ABA30/400/140/55/SO Presser with Automatic Length Adjustment CLA-A Asymmetric Control for Bending Auxiliary Tools for Positive Edges UCE1000 CLA Tool Kit PSE for Cleaning and Lubricating the Bending Cheeks P Auxiliary Tool Shifting Device CUT.ULC004 Option for Cutting and Dispensing Profiles BTV for Clamping Device BHL of the Square Fork SPR34 Panel Dispenser SAP34.ANT Panel Dispenser/Buffer Long-Life Oil for P4Xe-3816 First Fill Oil with a Long Life duration

Condition: used, Year of construction: 1987, Max. bending length: 1500 mm Max. sheet thickness: 1.5 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Bs Iaeudqd Re Unxiowl Lifting height of the upper beam and material thickness can be preselected via limit switch Manual backgauge Weight: approx. 1000 kg

Condition: excellent (used), Year of construction: 1992, sheet thickness steel (max.): 4 mm, working width: 1,020 mm, upper beam stroke: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Adjustment of bending beam 50 mm Bs Ia Unxsugum Isiewl Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm All data without guarantee A demonstration is possible at any time in our showroom.

Year of construction: 2002, Condition: refurbished (used), Used refurbished Salvagnini P4 panel bender / cnc folder for sale complete with sheet metal loading system Salvagnini P4 PERFORMER refurbished in 2012 for sale – Made in Austria: Specification – new / year 2002 – machine revised in 2012 Max Bending Length 1850mm Max width of finished Panel 1500mm Max Diagonal of incoming sheet 2150mm Max length of incoming blank 2000mm Max width of the blank 1500mm Max bend height 127mm Max thickness of material at 400 N/mm2 (m/s) 2mm Bending angles obtainable -125 Degree to +125 Degree Total machine hours on 23,000 Sheet metal load and unload system: Configuration ADP 2715 SAP 211618 POS Bo Ia Uogu Dynjnxiowl P4.1812 Servo-controlled panel bender Upper Bending blade Lower Bending blade Chiller Used Salvagnini machines wanted and for sale, models such as: S4 –30 Auto load/unload Punching,Salvagnini P4 2512 ALA Panel Bender, Salvagnini P2 Performer Panel Bender, Salvagnini S4.30,Salvagnini P4.2512 Panel Bender,Salvagnini P4.2512,P4 2516ABA, Salvagnini P4 1712, Salvagnini P4 2112 HPT Panel bender,Salvagnini P2 Performer Panel Bender, Salvagnini P4.1712, Salvagnini P4.2516ABA Automated Panel Bending System

Condition: good (used), machine/vehicle number: Unbekannt, OFFER 16304 Technical data: - max. working width 750 mm - max. material thickness approx. 1,0 mm - bending beam + upper beam foldable - bending rail with cut-outs Bwo Iasgq Nbmj Unxijl - space requirement approx. W 1000 x H 1100 x D 750 mm - weight approx. 70 kg

Condition: good (used), Year of construction: 1996, sheet width 2000 mm plate thickness 2 mm distance between columns 2100 mm Bwe Ia Unxsul Egdeisl total power requirement 6 kW weight of the machine ca. 2 t dimensions of the machine ca. 2,7x1,2x1,1 m Voltage 380V belt width max. 2000 mm sheet thickness 2 mm Dimensions (LxWxH) approx. 2700x1200x1100 mm

Condition: new, working width: 6020 x 1000: ca. 140weight approx.: 2 tomessurements (LxWxH): ca. 7000 x 1700 x 1500: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 6020 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL - EVEN CONTACT PRESSURE - HAND CUTTER Bwo Iasrzx Emo Unxijl - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).

Condition: used, Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be preselected via scale Manual and automatic bending mode possible Bwe Ia Unxsq T Ud Soisl Weight: approx. 650 kg

Condition: good (used), Year of construction: 1984, machine/vehicle number: 6229, Offer 24483 Technical data: - max. working width 1020 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle setting preselectable 6 - 135 ° - 6-fold bending angle preselection Bs Ia Uou Eq Rponxijwl - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - of the bending beam 50 mm - of the lower beam 50 mm - E. foot switch - Upper beam drive 400 V / 2.2 kW - Bending beam drive 400 V / 2.2 kW - Space requirement approx. W 2100 x H 1400 x D 1100 mm - Weight approx. 2000 kg

Condition: new, working width: 4010: ca. 140: Drehstrom 230 V / 400 V - 1,5bending angle (max.): 180bending length: 4010 - HIGH PROFITABILITY - FULLY HYDRAULIC - HIGH QUALITY STEEL Bws Ia Uer A Ntwjnxiol - EVEN CONTACT PRESSURE - HAND CUTTER - WITH PROFILING DEVICE - ELECTRONIC ANGLE ADJUSTMENT The RULI long folding machine is the ideal machine for plumbers and large and small sheet metal processing companies. It is particularly characterized by its simple and sophisticated design and is not susceptible to repairs. The RULI long bending machine works fully hydraulically; clamping and bending are each controlled with a small lever. The pendulum-mounted and vertically closing upper beam enables contact pressure to be evenly distributed over the entire length and prevents the sheet metal from shifting during clamping. 2 degree scales allow you to read and adjust the individual bending angles. The machine is installed on a concrete floor or ceiling (min. 12 cm).