Used coilers for sale (132)

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos Hsdpoitdiksfx Afzeh -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Year of construction: 2010, condition: good (used), weight 3000 kg Hsdpfxjhhiaws Afzsh

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Hsdpfx Afeycnf Sozeh Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: good (used), Year of construction: 1985, Decoiler for unwinding rolls of sheet, e.g. zinc. Brand: Kader BV Type: Geska 4 Hjdpoqctq Esfx Afzsh Year of construction: 1985 Engine: 0.25 kW Mains voltage: 380 V Rear roller diameter: ± 450 mm Machine is in very clean condition.

Condition: new, Year of construction: 2026, neu 2026 070153 prompt, Zwischenverkauf v Türkei 4800 € 1 500 kg 1200 mm 400 mm 550 mm 300 mm 50 mm 80 mm 0.55 kW 1400 mm 1200 mm 1550 mm Hsdpowirz Sjfx Afzsh 190 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control

Condition: new, Year of construction: 2026, neu 2026 070155 prompt, Zwischenverkauf v Türkei 6900 € 133.17 € 1 500 kg 1200 mm 400 mm 550 mm 300 mm 80 mm 1450 mm Hedpfswirmuox Afzoh 1200 mm 1640 mm 260 kg motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control PNEUMATIC DOWN HOLDER SUPPORT ARM

Condition: used, Uncoiler, Sheet Metal Decoiler, Used machine Manufacturer: GSW Schwabe AG Type: LHM 150/800 Hodpfx Afsyc Spbezeh Overall dimensions: 860 x 740 x 1430 mm Load capacity: 150 kg Sheet width: 150 mm

Condition: used, Year of construction: 1980, material width 200 mm coil weight 0,15 t coil internal dia. 200 - 550 mm speed 6 - 30 U/min Weight 0,2 t Dimensions (WxDxH) 0,9 x 0,9 x 1,3 m Hedox Dnd Nopfx Afzsh

Condition: used, Year of construction: 2001, material width 410 mm coil weight 2,0 t coil internal diameter 380 - 520 mm coil external diameter 1400 mm power requirement 2,2 + 1,1 kW weight of decoiler 0,7 t dimensions decoiler (WxDxH) 1,4 x 1,4 x 1,65 mm weight of the pulling device 1,15 t Hodpfxjvut The Afzoh required space of the pulling device (WxDxH) 1,7 x 1,1 x 2,2 m Decoiler 2370 DFPS without drive, with pneumatic lag brake, hydraulic centralized expansion, pneumatic snubber roll pulling device / hydraulic threading device 235 D with infinitely variable drive, coild loop control via ultrasonic material thickness up to approx. 6,0 mm roll diameter approx. 160 mm

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t coil internal dia. 480 - 520 mm coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm Hsdpfovuungjx Afzjh

Condition: used, Year of construction: 1999, material width 360 mm coil weight 3,0 t coil internal diameter 380 - 520 mm coil external diameter 1500 mm weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate can be inspected in running condition in our warehouse Hedpfx Afjvut R Hjzeh

Condition: used, Year of construction: 1969, material width 100 mm Hedjvzxnqspfx Afzeh coil weight 0,1 t coil internal diameter 190 - 800 mm coil external diameter 900 mm weight 0,1 t dimensions (WxDxH) 0,65 x 0,9 x 1,4 m motoric driven, with manual expansion, coil loop control can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion Hjdjvuuapopfx Afzjh as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: used, Year of construction: 1986, material width 300 mm coil weight 0,5 t coil internal diameter 420 - 520 mm coil external diameter 1400 mm weight 0,6 t Hodpevuufrjfx Afzsh dimensions (WxDxH) 0,8 x 1,2 x 1,7 m WITHOUT drive, with pneumatic lag brake, pneumatic centralized expansion as is where is, in given condition

Condition: used, Pay-off and Take-up Decoiler KEMMERICH / STANGE Type HA 1500 / 500 Serial No. 51673 Year of Manufacture: 2023 (unused) Maximum coil weight: 1500 kg Coil width with guide arms: 500 mm Coil width without guide arms: 670 mm Coil inner diameter: 300 - 370 mm Coil inner diameter with extension jaws: approx. 380 - 440 mm Decoiler turntable diameter: Ø 2080 mm Coil outer diameter without pressure arm: max. 2350 mm Coil outer diameter with pressure arm: max. 2200 mm Center of turntable to decoiler base: 1200 mm Decoiler shaft, support shaft: Ø 70 mm Speed: approx. 1.5 to 20 rpm Hedsua Nngopfx Afzeh Motor power: 1.1 kW Power supply: 400 Volt, 50 Hz - stepless turntable speed adjustment via frequency converter - loop switch / proximity switch for decoiler STOP - central expansion via hand crank - clockwise and counterclockwise rotation - pneumatic pressure arm with running roller - 4 guide arms, 870 mm each - 4 plastic extension jaws for adapting the turntable Space requirement (L x W x H) Weight: 970 kg Very good condition

Condition: used, Decoiler and straightener, sheet uncoiler, sheet straightener, coil unwinder, feeder, used machine Overall dimensions: Width: 2000 mm Hodpfjybazpjx Afzoh Depth: 900 mm Height: 1500 mm Weight: 636 kg Decoiler coil diameter range (min–max): 360–520 mm Electrical data: 400V Straightening width: 205 mm Roller diameter: approx. 35 mm Lower roller set: 4 pcs Upper roller set: 3 pcs

Condition: used, Year of construction: 1995, material width 300 mm coil weight 1,25 t material thickness 0,4 - 3,5 mm coil internal diameter 320 - 420 mm coil external diameter 1300 mm material cross-cut 750 mm² no. of straightening rolls 11 straightening roll diameter 60 mm number of draw-in rolls 4 roll diameter 60 mm speed 5 - 30 m/min power requirement 5,0 kW Hedpfx Afewc U Izozjh Weight 1,4 t Dimensions (WxDxH) 3,3 x 1,85 x 1,7 m Straightening machine (Type 1675-B11-FQ) with infinitely variable drive, driven straightening rolls, manual individual adjustment of the roller cassette, cntralized adjustment of the material width, outlet rolls Decoiler, single (Type 2350 B-FPS) not driven, with pneumatic lag break, hydraulic centralized expansion, pneumatic snubber roll coil loop control via sensor

Condition: used, Year of construction: 2008, material width 600 mm coil weight 2 x 1,5 t coil internal dia. 370 - 630 mm coil outside dia. 1560 mm speed 12 U/min Power capacity 1,1 kW Hsdpfx Afsv Svbiezjh Weight 1,5 t Dimensions (WxDxH) 2,5 x 1,2 x 1,9 m double decoiler, swivellable with motor, manual expansion, coil loop control

Condition: used, Year of construction: 1970, material width 200 mm coil weight 0,075 t coil internal dia. 290 - 450 mm coil external diameter 800 mm Hjdpfx Asvzxtgofzoh 26 U/min power requirement 0,25 kW Dimensions (WxDxH) 0,9 x 0,8 x 1,7 m motoric driven, with manual centralized expansion as is where is, WITHOUT any additional work (see video)

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm Hjdpsvuk R Dsfx Afzjh power requirement 0,7 kW weight 0,7 t Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm can be inspected in running condition in our warehouse

Condition: used, Double coiler, coiler, decoiler, for sheet metal processing, punch, eccentric press, hydraulic press, punching machine -Handover in the current condition as seen -Drive: without -Max. Recording: Ø 590 mm -min Recording: Ø 250 mm - Recording width: 300 mm -Dimensions: 1460/1000/H1400 mm -Weight: 332 kg Hedpfx Ajd Nttnjfzeh

Condition: excellent (used), functionality: fully functional, Year of construction: 1988, loading capacity: max. 3.000 Kg. table diameter: 1.600 mm Hsdpfx Astzwxwjfzoh strip metal width: max. 150 mm

Condition: good (used), functionality: fully functional, decoiler/unwinder with brake clamping range inside from 250 to 300 mm width max. 295 mm in good condition ready for immediate use Hodsycf Epjpfx Afzoh

Condition: excellent (used), functionality: fully functional, Decoiler, Reel/unwinding reel Hodpfjycf Ahjx Afzsh Internal coil diameter from 250 to 450 mm External coil diameter max. 1000 mm Width max. 200 mm With brake Good condition, ready for immediate use

Condition: excellent (used), Year of construction: 2018, operating hours: 54,119 h, functionality: fully functional, machine/vehicle number: 14591-179, Make: Röders Model: RPX 400 Year: 2018 Serial no.: 14591-179 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E25 (ISO) • Max. tool diameter: Ø 4 mm Worktable: • Table size: 450 x 300 mm • T-slots: 12 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 330 mm • Max. workpiece weight: 100 kg Travels: • X-axis: 410 mm • Y-axis: 294 mm • Z-axis: 210 mm Feed rates: • 0–60,000 mm/min Tool changer: • 18-position automatic tool changer Features / Equipment: • Ceramic bearings • Chip separator and chip conveyor • Includes Erowa ER-016841 UPC clamping chuck Hours: • Total hours (read): 54,119 h • Cutting/milling time: 29,529 h Weight: 3,200 kg Electrical: • 400 V • 32 A Hodpfx Aoyangdjfzoh Overall dimensions: 2,515 x 1,930 x 2,080 mm