Used Press brakes with 120-149t bending force for sale (91)

Condition: used, Year of construction: 2008, Pressure 130 t Bending length 3200 mm Folding column width 2690 mm Cobvswgk Hnemicgsgt Maximum stroke 445 mm Operating hours approx. 49,794 h Total power requirement 24 kW Machine weight approx. 10,900 kg Equipment: – Trumpf Tasc 6000 control system – 2 support arms in front of the machine – Foot switch – Laser safe Operating hours: Machine on: approx. 49,794 h Hydraulics operating time: approx. 31,087 h Press beam operating time: approx. 4,655 h Crafter operating time: approx. 313 h

Condition: used, Year of construction: 1999, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm - in checked condition - machine video - ?v=9p4LKjmo-os Equipment: - CNC electro-hydraulic press brake - CYBELEC CNC control Mod. DNC 1200 PS/B * Serial No. 0292 * swiveling control panel, front right Cgebsvub Dhevmicgst * numerical programming * tool & program library * including external keyboard - CNC controlled axes: Y1 + Y2 + X + R + CNC crowning - CNC electro-motorized back stop (X axis) * with 4x manually movable stop fingers (Z axis) * Travel path max. 5.0 - 1,000 mm * Travel speed max. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel path max. 90 - 240 mm * Travel speed max. 100 mm/sec. - CNC under-table cambering - CNC pneumatic die shifting (I axis) - pneumatic upper tool clamping - manual lower tool clamping - rear protective grille, including pivoting door - 2x side protective grilles - 2x stable front support arms with "sliding system" - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - original operating instructions

Condition: good (used), Year of construction: 2007, Used 3-meter press brake from LVD Type: PPEB 135 30 Capacity: 3100 x 135 ton Cadman CNC control Y1, Y2, X, X1, R, Z1, and Z2 Cjbvjvaxrgemicgogt CNC crowning Corner measurement system (not connected) Wila hydraulic top and bottom clamping

Condition: ready for operation (used), Year of construction: 2012, Max. Pressing force: 360KN Mounting height:300mm Clearance between the uprights 932mm Reach of the arms: 150mm Working height:1150mm Working speed Y axis: 220mm/s Maximum stroke of the Y axis: 120mm Inertia time: max. 90ms Minimum safety distance: 180mm Reverse speed: 220ms Speed of the X axis 1000mm/s Speed of the R axis 330mm/s Speed of the Z axis 1000mm/s Positioning speed of the X axis 0.04mm Positioning speed of the X axis 0.04mm Positioning speed of the R axis 0.06mm X axis travel: 240mm Cgobvmouihnwjicgot R axis travel: 80mm Space requirement: 1805x 1330x 2380mm Weight machine approx. 2.600Kg Total connected load. Approx. 6kVA Options: Back gauge system 6 axes Comfort support table at the front (folding) Comfort footrest Front work area lighting (LED) Swivel control unit BendGuard safety device (with block laser) Top and bottom tool clamping Automatic

Condition: used, Year of construction: 1995, operating hours: 40,734 h, Functionality: fully functional, machine/vehicle number: 885048, pressing force: 120 t, overall weight: 11,200 kg, bending length: 3,000 mm, stroke distance: 215 mm, space requirement length: 3,660 mm, space requirement height: 2,500 mm, space requirement width: 2,310 mm, For sale is a Trumpf TrumaBend V130 press brake with 120 t of press force. The machine is running and ready for use. All tools are included in the price. Pressure 130 t Bending length 3060 mm Column width 2690 mm Column overhang 410 mm Stroke 215 mm Installation height 385 mm Feed speed 200 mm/sec Working speed 1.0 - 10.0 mm/sec Retraction speed 135 mm/sec Table width 120 mm Table height 1050 mm Tilt adjustable up to +/- 10.0 mm Operating hours 40,734 h Compressed air 5.0 - 7.0 bar Cobsv I T Ryevmicgsgt Oil capacity 250 l Operating pressure 340 bar Voltage 400 V Total power requirement 23.0 kVA Machine weight approx. 12,000 kg Dimensions L-W-H 3660 x 2310 x 2500 mm

Condition: used, Reversible V-block, 1-piece die block, die block for press brakes Cjbvmiswbvmcscgsgt Bending tool for press brakes Reversible V-block with 6 different V-blocks V-block size: 30 mm with 3 mm radius for 90°, 40 mm with 4.5 mm radius for 90° 50 mm with 4 mm radius for 90°, 18 mm for 90°, 10 mm for 90° 12 mm for 45° Dimensions: 90 x 88 mm V-block length: 3000 mm Weight: 147 kg Good condition

Condition: used, Year of construction: 1998, Pressure 130 t Bending length 3550 mm Column width 3050 mm Stroke 250 mm Cybelec control system Machine weight approx. 11,600 kg Space required approx. 4000 x 2000 x 3000 mm Cobewgkwtevmicgjgt Accessories/Equipment: - CYBELEC DNC 70 control system - 2 support arms - 2-hand foot control - Wila tool holders, top and bottom - Crowning - Side guards - 4 manually adjustable stop fingers - Controlled axes: y1, y2, x, R

Condition: excellent (used), Year of construction: 1998, Pressure capacity 135 t Cgobvmswa R Raoicgjt Bending length 3600 mm Column clearance 3000 mm Thrust 415 mm Distance between table and press beam approx. 430 mm Stroke length approx. 175 mm Working height 950 mm Forward speed 100 mm/s Working speed 7 mm/s Reverse speed 100 mm/s Drive power approx. 15 kW Dimensions L x W x H 4800 x 1900 x 2620 mm Weight 9500 kg Accessories / Special features: • 5-axis CNC control HACO BC 45 Graphic Y1 + Y2, X, Z, R for insertion depth and backgauge forward/backward + up/down, stop fingers together/apart • Conical bending possible • Hydraulic synchronous control • Manual table crowning by hand crank adjustment Adjustable under the die with SIKO counter and in the tool cassettes via a wedge • Split upper tools • "PROMECAM" tool holder system • Split universal die with busbar • 2 support arms • Fast, precise, and easy to adjust • Two-hand control panel, electric foot switch, and emergency stop • Electrically protected safety doors • CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 2007, operating hours: 4,300 h, Functionality: fully functional, Trumpf TruBend 5130 press brake (2007) This Trumpf TruBend 5130 bending machine was manufactured in 2007. It has a work order of 13,892 production hours. The Trubend is equipped with a Trumpf DA 65 TW control unit. This machine can work with a pressing force of up to 1200 kN. Trumpf TruBend 5130 press brake Manufacturer: Trumpf Type: Trubend 5130 Year of manufacture: 2007 Condition: used, good Operation hours: 36,940h Hydraulics running time: 22,490h Press beam running time: 4,264h Crafter running time: 242h Max. bending length 3230 mm Distance between the columns 2690 mm Max. pressing force 130T Distance between table mount 470 mm Cgobvjwbppdemicget Max. stroke 445 mm Number of controlled axes 4x Stop fingers 8x Upper tool clamp hydraulic Lower tool clamp hydraulic Crafter CNC BendGuard Tasc 6000 control Bending aid front 1x Total connected load approx.: 24 kVA Weight approx. 11,000kg Space required: 2840 x 4060 x 1740 mm Note: Without tools

Year of construction: 1965, Condition: used, Press brake Factory Wilhelm Jonescheit type HYPM 125 -300 stroke 30 - 70 mm pressure 125 t weight 9150 kg Cgjbvmioillxyjcgot

Condition: ready for operation (used), Year of construction: 1997, Available immediately from location: Trumpf CNC press brake Type V 130 Year of manufacture 1997 Cebvmicowfni Regsgt Pressure capacity 130 tons Working length 3060 mm Column clearance 2690 mm Throat 410 mm Stroke 365 mm Installation height 535 mm Feed speed 200 mm/sec Retraction speed 135 mm/sec Working speed 1.0 – 10 mm/sec Table width 120 mm Many tools Weight 13 tons Price: €15,000 plus VAT, ex location

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, pressing force: 125 t, throat depth: 300 mm, distance between stands: 3,050 mm, bending length: 3,550 mm, stroke distance: 240 mm, TECHNICAL DETAILS Pressure: 125 t Bending length: 3,550 mm Distance between columns: 3,050 mm Column overhang: 300 mm Ram stroke: 240 mm Hydraulics and Energy Oil volume: 200 l Total power requirement: 11 kW Control system Control system: Cybelec DNC 70 MACHINE DETAILS Cgobvmicswf H Tujgst Overall length: 4,500 mm Overall width: 2,200 mm Overall height: 3,000 mm Machine weight: approx. 14,000 kg EQUIPMENT - Manual crowning available - 3 manual stop fingers available - Die shift available - Pneumatic top tool clamping available - Foot switch available

Condition: good (used), Year of construction: 1995, Pressure 125 t Csbsugtv Uovmicgegt folding length 3550 mm Total power requirement 11 kW Equipment/accessories: - Numerical control Cybelec DNC 4 PSG with diskette station and graphics - controlled axes Y1 Y2 X- R3 Pos pneumatic - Z Backgauge finger manually adjustable - Die displacement pos. 3 pneumatic - Hydraulic quick clamping device for upper tools - Manual crowning device - 2 front support consoles - Extensive tool set

Condition: refurbished (used), Year of construction: 2005, AMADA MODEL HFE 130-3 130 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, ERWIN SICK machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 130-3 downstroke CNC Press brake Year 2005 hours 9000 Tonnage 1300 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R1 R2 Z1 Z2 Max. Bend Length 3000 mm Open height 470 mm Stroke Length 200 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity 110 LITRES Motor Power 11 kw Weight 7800 KG kg CNC Control Backgauge Stoke (X axis) 700 mm/s Cgsbjthgidovmicgot Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), Year of construction: 1997, Dead weight: 8,000 kg, pressure: 125 t, bending length: 3,050 mm, stroke approx. 335 mm, CNC control DELEM, Csbvmiowduiuscgogt

Condition: excellent (used), Year of construction: 2012, SAFAN DARLEY E-Brake 150-3100 Working length 3060mm Bending force max. 1500kN Cgobjvcyv Sjvmicget HUB 300mm Equipment and technical data see pictures.

Condition: used, pressure 125 t chamfer lenght 3050 mm distance between columns 2550 mm ajustment speed 90.0 mm/sec working feed 10.0 mm/sec return speed 75.0 mm/sec stroke 140 mm dayligth 375 mm column arm 250 mm table width 90.0 mm work height max. ca. 950 mm Number of working hours 14.100 h total power requirement 13.5 kW weight 8500 kg range L-W-H 3630 x 2300 x 2505 mm From a maintenance workshop Good / well-maintained condition With only approx. 14.100 operating hours (!!) Equipment: - CNC electro-hydraulic press brake - DELEM CNC control - model "DA 58" * Swiveling control panel, front left * 2D graphic programming & product display * Tool & program library - CNC-controlled axes: * Y1+Y2 / X1+X2 / R1+R2 / Z1+Z2 / CNC crowning - CNC electro-motorized backgauge (X axes) * Stop system with 2x CNC-controlled gantries - CNC electro-motorized height adjustment of the backgauge (R axes) - CNC electro-motorized adjustment of the stop fingers (Z axes) - Manual upper tool clamping - Manual lower tool clamping - Various split upper and lower tools - 2x stable, movable Front support arms - 1x freely movable 2-hand/foot control - Side guard (swinging doors) - Rear guard (swinging door) Cjbvjv Svaljmicgjgt - Original operating instructions + control unit - Manufacturer's CE declaration

Condition: new, The AHK V CNC series models fulfill the most demanding requirements for modern press brakes according to European standards. These models were developed with advanced design technology and built on modern production lines resulting in superior quality, precision and reliability. All AHK V CNC series models feature a DELEM graphical touchscreen that provides efficient CNC programming tools and control over the entire bending process. Various back gauge options are available so these press brakes easily can be adapted for a wide spectrum of requirements. Cgebsu E Nwuovmicgst

Condition: new, pressure: 125bending length: 3200column width: 2655motor: 11slide stroke - max.: 200Machine Model: Nominal Force: 125 kNBending Length: 3200 mmDistance Between Columns: 2655 mmThroat Depth: 400 mmSlider Stroke: 200 mmMax Opening: 455 mmSlider Down Speed: 180 mm/sSlider Return Speed: 160 mm/sSlider Working Speed: 13 mm/sMain Motor Power: 11 kWCNC System: ZY68Number of Control Axes: 4+1Oil Tank Capacity: 300 L Back Gauge XX-Axis Travel: 600 mmX-Axis Speed: 200 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mmMotor Power: 0.85 kW Cgebvmicswacqxsget Back Gauge RR-Axis Travel: 150 mmR-Axis Speed: 100 mm/sPositioning Accuracy: ±0.10 mmRepeat Positioning Accuracy: ±0.015 mm Dimensions:Length: 3450 mmWidth: 1580 mmHeight: 2550 mmWeight: 7100 kg Delem T53 Control System (Additional ¤5,000)

Condition: ready for operation (used), Year of construction: 1992, Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm. Cjbvmiswcz Axscgjgt

Condition: excellent (used), Year of construction: 1996, Max. pressing force: 1300 kN Cebjv Sat Ajvmicgogt

Condition: used, Year of construction: 2001, Functionality: fully functional, machine/vehicle number: B0104A0005, overall weight: 12,950 kg, operating pressure: 340 bar, stroke adjustment: 365 mm, TrumaBend V 130 Csbvmicjwc R Nuegogt Trumpf TrumaBend V 130 press brake Production: year 2001 Pressure force 1300 kN ( 130 t ) Bending length 3,060 mm Good condition - still in operation

Condition: used, Year of construction: 1992, Model Name Cgebvmjukv U Ajicgot PRM 30.135

Condition: good (used), Year of construction: 1999, Technical specifications: Working length: 3050 mm Distance between columns: 2690 mm Press force: 130 tons CNC control: DELEM DA65 2 D graphic Adjustable backgauge Controlled axes: Y1 / Y2; X; R; I CNC table bending compensation: Wila Moducrown Hydraulic tool clamping at the top and bottom Pneumatic tool shifting Parking position for bending aid Angle measuring system Installation height: 535 mm Stroke: 250 mm Cgsbvmevrg Umsicgot Thrust: 410 mm Motor power: 12.5 kW Number of stop fingers: 2 CE mark Dimensions (length x width x height): approx. 3800 x 2350 x 3150 mm Weight: approx. 14 tons Accessories: CNC-controlled hydraulic Bending aid 1 set of standard tools Condition: Good condition, tools in mint condition You can find more machines on our website. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3212-CNC OT-41 Specifications - Nominal pressure: 1250 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 120 mm - Daylight: 390 mm - Distance between side frames: 2700 mm Cebvmsgi Dk Djicgsgt - Max backgauge distance: 600 mm - Nominal motor power: 7.5 kW - Length: 3870 mm - Width: 1550 mm - Height: 2400 mm - Weight: 6700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site