Used punch presses with 0-35t punching force for sale (144)

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 83,800 h, Equipment: CE marking, LVD STRIPPIT GLOBAL 30 1225 turret press The machine is in very good technical condition and was used by Alsanit. It has been regularly serviced exclusively by the manufacturer's service department. Only new and original spare parts are used during service. The turret press is currently in continuous production use. If you are interested, we encourage you to schedule a visit to confirm the technical condition and technological capabilities of the machine. General data: Location: Alsanit Sp. z o.o., ul. Wieleńska 2, 64-980 Trzcianka, Poland Province: Wielkopolskie Year of manufacture of the turret press: 2006 Date of purchase and installation of the machine: June 2019 Machine operating hours: 83584 cycles Maximum pressing force: 300 kN (30 tons) Maximum sheet thickness: 6.4 mm Turret system type: Thick Turret Control unit: CNC: GE FANUC 180 IP Maximum travel in the X-axis: 2,576 mm Maximum travel in the Y-axis: 1,337 mm Maximum table load (uniform): 145.6 kg Simultaneous speeds: 110 m/min Number of strokes per minute (punch diameter 25 mm): ±2% 400 min-1 Number of strokes per minute (nibbling function - 2 mm): 1000 min-1 Number of strokes per minute (marking/0.5 mm): 1700 min-1 Maximum slide speed in the X-axis: 83 m/min Maximum slide speed in the Y-axis: 73 m/min Number of tool stations in the turret: 30 pcs Station A – max. diameter 12.7 mm: 8 pcs Station B – max. diameter 31.7 mm: 16 pcs Psdpfxozxzago Amlogu Station C – max. diameter 50.8 mm: 2 pcs Station D – max. diameter 88.9 mm: 4 pcs Number of indexed (rotary) stations in the turret: 4 pcs (stations D) Note: Each station D can accommodate a multi-tool (1 multi-tool contains 3 to 8 tools), which increases the number of tools from 12 to 32 pcs. Machine height: 2,325 mm Machine length: 5,584 mm Machine width: 5,160 mm Machine weight: 13,750 kg Sheet size: 1250 x 2500 mm Number of sheet clamps (individually programmable): 3 pcs Tilting scrap collector for cut parts: 450 x 500 mm Brush table protecting against scratching the sheets CE certificate Electrical power supply: 380/415 Volt, 35.5 kVA, 63 A, cable cross-section (3+1)x16 mm2 Additional equipment: Scrap conveyor; Brush table MACHINE SPECIFICATION The machine is constructed as a closed bridge frame. The rigid construction ensures stability, reduces noise, vibrations, and oscillations during operation, which in turn has a positive effect on the long service life of both the tools and the machine. The sheet clamps are controlled by a foot switch, and the pin that extends from the table for positioning allows the operator's hands to remain free for proper placement of the sheet on the table. The turret drum of the LVD Strippit Global 30 punch press is made as a cast monoblock, mounted in the machine structure and supported by high-quality and precise bearings. In addition, inside the turret drum, in each tool station, there are hardened and improved sleeves, which can be easily replaced if necessary. The servo drive of the turret ensures precise bidirectional rotation of the turret and the indexing stations (which are locked by a ball head pin after reaching the required angular position, and the accurate linearity and perpendicularity are ensured by tapered, hardened sleeves).

Condition: excellent (used), Year of construction: 1998, TYPE BRIDGE FRAME HYDRAULIC CAPACITY 20 TONS CONTROL FANUC SERIES 18P TURRET 31 STATION THICK TYPE 3 AUTO-INDEX STATIONS 19 X A 6 X B 1 X C 2 X D AUTO INDEX STATIONS 2 X B 1 X C MAX TRAVERSE (WORKING AREA) 1270 X 1270 MAX SHEET SIZE ( WITH ONE REPOSITION) 1270 X 2540 MAX SIMULTANEOUS SPEED 82 METRES PER MINUTE MAX SHEET WEIGHT 75KG MAX SHEET THICKNESS 3.2MS MAX HIT RATE 1000 HITS PER MINUTE TABLE BRUSH TYPE WEIGHT 9.8 TONS COMPLETE WITH CHILLER NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 axis simultaneous Tape Code ... EIA or ISO (Automatic recognition) Programming Mode ... Absolute / incremental Min. Input ... 0.01 mm (0.010) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 digit T Function ... T - 3 digit M Function ... M - 3 digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb Max. No. Of Programs ... 191 Psdpfx Amj Affmnelsgu Display ... 9" Colour LCD Machine Operation ... Memory or tape Punch Interface ... RS 232 C

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Pjdpfx Amjzxxhnsljgu Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: used, total length: 2,100 mm, total width: 1,000 mm, total height: 2,450 mm, Colour: White Empty weight: 4.600 kg Iron worker, punch press and section shear  Including Length-Stop Hersteller: Mubea / Muhr & Bender Type: Hydraulic Type: KBLH 1000 Capacity: 110 ton Shear plate: 200x26mm, 500x20mm Notching: 85x75x16mm Throat: 510mm Machine-weight: 4600kg - Year: 1 - Documentation available: Yes - Drive system: Conventional - Drive: Hydraulic - Punching force [ton]: 110 - Punch throat depth [mm]: 510 - Notching width [mm]: 200 - Shearing width [mm]: 500 - Max. plate thickness shearing [mm]: 2.5 - Options: Length stop - Transport dimensions: 2100mm x 1000mm x 2450mm (l x w x h) - Transport weight [kg]: 4600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Pgjdpfx Ae Aatr Ujmlou Lukas van Rossum

Condition: used, functionality: fully functional, Year of construction: 1998, machine/vehicle number: 070691, control type: CNC control, actuation type: mechanical, punching force: 165 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, table length: 2,070 mm, table width: 1,280 mm, overall weight: 8,000 kg, power: 14 kW (19.03 HP), input voltage: 220 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine (with Multitool) For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1998. Well maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070691 Year of manufacture: 1998 Max. punching force: 165 kN Machine weight: 8,000 kg Power supply: 220V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Compressed air connection: 6 bar Comes complete with tooling, cassettes, and Multitool. For reference, the standard specifications for this model are: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. Pgjdpfx Amez E Sa Iolsu For technical questions or to arrange a visit, please contact us by email. We will be happy to answer any questions and provide further photos or videos of the machine in operation.

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 070027, control type: CNC control, punching force: 150 t, punching diameter: 76 mm, sheet thickness (max.): 6 mm, overall weight: 8,000 kg, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Trumpf Trumatic 200 CNC punching machine For sale: a Trumpf Trumatic 200 CNC punching machine (internal designation TC 200 R), manufactured in Germany in 1994. Well-maintained, fully operational, and available for inspection at our facility in Zaragoza, Spain. Type: 9095 — Serial number: 070027 Year of manufacture: 1994 Max. punching force: 150 kN Machine weight: 8,000 kg Power supply: 380V / 50Hz — Connected load: 14 kVA — Control voltage: 24V DC Required fuse protection: 3x25A Pjdjz E R S Aspfx Amlogu Compressed air connection: 6 bar Comes complete with tooling and cassettes. For reference, standard specifications of this model: working area 2,070 x 1,280 mm, max. sheet thickness 6.4 mm, max. punch diameter 76.2 mm, X-axis speed 80 m/min, Y-axis speed 55 m/min. For technical questions or to arrange a visit, please contact us by email – we will be happy to answer any questions or send further photos/videos of the machine in operation.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1994, EDEL - Stanzprofi 250 / Punching machine -CE marking -Year of manufacture 1994 -Depth stop approx. 250 mm -Length stop approx. 500 mm -Working area 1000x500 mm -Tool area up to max. 100 mm -Material thickness up to approx. 10 mm -Punching example - diameter 70 mm in 3 mm sheet metal -Punching example - diameter 25 mm in 8 mm sheet metal -Punching sequence / time interval 1 second -Drive power 1.5 kW -Table dimensions approx. 1350x700 mm -Operating pressure 6 bar -F-Max. 250 KN / (25 MP) -Various punching dies Pedpoz Dq S Tsfx Amlsgu -Machine feet -Documentation Dimensions approx. 1.6x2x1.8 meters / Weight approx. 1400 kg Subject to errors and omissions.

Condition: good (used), Year of construction: 1987, machine/vehicle number: 287, Offer 26239 Technical data: - Pressing force: 250 kN - Max. sheet thickness: 10 mm - Max. punch size / punching diameter: 105 mm - Stroke, continuously adjustable: 0 - 40 mm - Overhang: 750 mm - Highest stroke rate: 150 strokes/min - Installation height: 200 mm - Drive: 400 V / 8.2 kVA - Space requirement: approx. W 4200 x H 1700 x D 1700 mm - Weight: approx. 3200 kg - Including: - Stop table, left and right, each with X-axis travel of 2000 mm - Y-axis travel: 500 mm - Quick-change tool system for punches - Foot pedal; emergency stop button - Extensive range of accessories, various tool holders Podpfx Amjz R Siisljgu - Punches and dies

Condition: good (used), Year of construction: 1998, Model ... Vipros 20-50-50 Frame Construction ... Bridge Type Press Capacity ... 20 Tonnes (196kN) Press Type ... Servo Controlled Hydraulic Ram Axis Traverse Distance ... 1270 mm x 1270 mm Workable Max. Sheet Size . 1270 mm x 2540 mm (with auto repositioning) Maximum Material Thickness ... 6.35 mm Mild Steel Max. Material Weight ... 105 Kg Max. Material Weight (Max Speed) ... 62 Kg Max. Hole Dia. ... 88.9 mm Number Of Stations ... 31 Stations: 19 x 12.7 mm 6 x 31.7 mm 1 x 50.8 mm 2 x 88.9 mm Auto Index 2 x 31.7 mm 1 x 50.8 mm Axis Speed ... 82 m/min Hits Per Minute (2mm Pitch) ... 1000 H.P.M./2.5mm Stroke (25.4mm Pitch) ... 340 H.P.M./8mm Stroke Turret Speed Bi-Directional ... 35 R.P.M. Punching Accuracy ... ± 0.07 mm Punching Accuracy (High Accuracy Mode) ... ± 0.05 mm Repeatability ... ± 0.015 mm Ram Stroke Length (Maximum) ... 40 mm Axis Drive ... AC Servo Motor Turret Drive ... AC Servo Motor Electric Power Required ... 22 kVA 400V +/- 10% 50 Hz Air Pressure Required ... 5.0 kgf/cm² Air Flow ... 250 1/min Machine Length ... 5030 mm Pedpfxe Afdz Rj Amlsgu Machine Width ... 2630 mm Machine Height ... 2160 mm Machine Weight ... 9200 kg NC SPECIFICATION Model of NC ... FANUC 18-P Axis ... 3 Axis Simultaneous + PHNC Tape Code ... EIA or ISO (Automatic Recognition) Programming Mode ... Absolute/incremental Min. Input ... 0.01 mm (0.01°) Max. Input ... 99999.99 mm Preparatory Function ... G - 2 Digit T Function ... T - 3 Digit M Function ... M - 3 Digit Single Block ... Yes Block Delete ... Yes Optional Stop ... Yes Editing ... Yes Manual Data Input ... Yes Memory Capacity ... 64 Kb No. Of Programs ... 200 Machine Operation ... Memory Interface ... RS 232 C

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,000 h, Machine in very good condition, only 17.000 hours. Fully functional. Pgsdpfx Asz Ayq Esmlou

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 18,000 h, control type: CNC control, actuation type: electric, controller model: AMNC-F (FANUC 180i-PB), punching force: 20 t, overall weight: 18,000 kg, Equipment: CE marking, documentation/manual, Manufacturer: Amada Model: EM 2510 NT Punching force: 20 tons (200 kN) Year of manufacture: 2007 Pedpfx Ajzzrn Tomlegu Stroke length (X/Y): 2500 x 1270 mm (expandable for larger sheets) with repositioning Turret configuration: 45 stations with 4 automatically indexable stations Control system: AMNC-F (FANUC 180i-PB) Touchscreen operation Power supply: 27 KVA Equipped with brush tables The machine is in very good condition! It can be inspected in working order on site. The machine will be supplied with several tools. Information and price available upon request.

Condition: used, Year of construction: 1994, punching pressure:20 t total power requirement:4 kW weight of the machine ca.:2,8 t dimensions of the machine ca.:3,2 x 1,4 x 1,45 m Pgedj Ad Skkopfx Amlju punch diameter:max. 105 mm sheet thickness - max.:6 mm stroke length max.:25 mm voltage:380 V frequency:50 Hz connected load:4 kVA punch diameter:105 max. mm input unit:0,01 mm

Condition: used, functionality: fully functional, Nitto punching tool with crane. Pgodpfx Ajz Szg Somlou

Condition: excellent (used), Year of construction: 2007, AMADA LKI MP 300 LOAD UNLOAD AUTOMATION Year 2007 Pgedsyylqbspfx Amlsu LKI MP 300M automatic sheet loader / manipulator with 3000mm x 1500mm sheet capacity.

Condition: used, functionality: fully functional, Year of construction: 1990, degree of automation: manual, punching force: 20 t, Equipment: emergency stop, foot remote control, Well-maintained machine in good working order, but without any additional tools. Pgsdpfxsz I Tqgo Amlju

Condition: used, functionality: fully functional, Year of construction: 1989, machine/vehicle number: 4867, Pressta Eisele Stamping Machine HE 40 S Pgjdpfx Amey Tizkelsu Price: 2,000 Euros

Condition: used, Year of construction: 2002, FULLY FUNCTIONAL PUNCHING MACHINE POSSIBILITY OF DISMANTLING IT FOR SPARE PARTS Pgodpjz I Tmhofx Amlsu

Condition: good (used), Year of construction: 2010, machine/vehicle number: 792-128, Offer 25368 Technical data: - Pressing force at 10 bar 70 kN - Ram stroke 20 mm - Air consumption per stroke 10 l - Air supply 6 - 10 bar - Barcode scanner Podpfxjx E S Eij Amljgu - Drive 220 V / 1 kW - Space requirement approx. W 1000 x H 2100 x D 1200 mm - Weight approx. 450 kg - Feed station with decoiler 4000 mm - Discharge conveyor 1900 mm - Software manual PRS - AWS

Condition: good (used), Year of construction: 2009, operating hours: 899 h, machine/vehicle number: SN20090545, punching force: 30 t, sheet thickness (max.): 6 mm, table length: 2,000 mm, table width: 1,270 mm, overall weight: 11,000 kg, working range: 40 mm, ERMAK RPP 1270x30 Ton Punching Machine, Year 2009 Brand: Ermak Model: RPP 1270x30 Serial Number: SN20090545 Year: 2009 Main Features: Operating Hours: - POWER ON Hours: 899 hours - Punching Hours: 1 hour 6 minutes - Punching Force: 30 tons - Maximum Capacity: - Sheet Thickness: 6 mm - Sheet Dimensions: 1270 mm (width) x 2000 mm (length) - Travel: 40 mm - Axis Travels: - X-axis: 2000 mm - Y-axis: 1270 mm - Travel speed: - X-axis: 70 m/min. - Y-axis: 70 m/min. - C-axis speed: 100 rpm. - Strokes per minute: Up to 700. - Accuracy: Psdpfx Aev S Ufyemlogu - Positioning: ±0.03 mm - Position tolerance: ±0.1 mm - Numerical control (CNC): GE Fanuc 18i-PB - Oil capacity: 300 liters. - Power: 15 kW - Machine dimensions: - Length: 4250 mm. - Width: 4000 mm. - Height: 2330 mm. - Weight: 11,000 kg.

Condition: like new (used), functionality: fully functional, Hydraulic punching machine Brand: Boschert Model: Ecco Line EL 500 Digital Features: Punching force: 28 t Work table dimensions (width x length): 500 x 1000 mm Pgsdpfjrn Swksx Amleu Maximum sheet thickness: 6 mm (up to a punch diameter of 40 mm) Maximum die diameter: 105 mm (up to 1 mm sheet thickness) Maximum number of strokes: 180 strokes/min Switch-on value: 5 kW Voltage: 3 x 400 V / 50 Hz Total weight: 2 tons Dimensions of the EL-500-Digital punching machine (length x width x height): 2400 x 1580 x 1540 mm Tool cabinet, 4 tool drawers Foot pedal Includes all the accessories shown in the pictures.

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Unloading 1000mm Pedpfxozulx Ej Amljgu Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Year of construction: 2001, machine/vehicle number: 008147801, Offer 26176 Technical data: - Dimensional stop with digital display 6000 mm - Jaw feed adjustable by handwheel with clamping function - pneumatic stop clamping - Pneumatic connection 6 bar - Space requirement approx. L 7700 x H 1350 x D 900 mm - Weight approx. 1200 kg Pgjdpfxezhamdj Amlou

Condition: ready for operation (used), Year of construction: 1995, pressure 35.0 t plate thickness max. 8.0 mm throat 830 mm diameter of seal max. 105 mm table: 1500 x 1200 mm work height max. 920 mm die stroke ca. 90.0 mm strokes per minute ca. 200 Pressure power 220 bar oil volume 80.0 l total power requirement 4.0 kW weight of the machine ca. 3200 kg range L-W-H 1600 x 1800 x 1800 mm The IS 35 hydraulic punching machine has been specially optimized for processing sheet metal and extruded parts. It stands out for its flexibility and manufacturing precision. The machines in the IS series are equipped with 35 metric tons of punching force. Features: - Electro-hydraulic punch press with long reach - Robust C-frame construction * Solid cast or welded frame (C-shape) * Extremely high punching precision Pgedpfx Aszf Nrksmlju * Compact design = small footprint * Hydraulic overload protection - Separate control unit - Single and continuous stroke selectable - Infinitely adjustable controller for: * â??top dead centerâ? - Continuously adjustable control for: * â??bottom dead centerâ? - Digital position display - 1x freely movable foot switch - Operating instructions (PDF)

Condition: good (used), Punching units, punching unit, punching jaw, punching tool, non-driven latching and shearing units, forming jaws -Quantity: 27x punch clips as shown in the pictures -Price for: all 27 pieces Pedpoyxn Erefx Amlsgu -Manufacturer: CEWE JOKA Raskin -various types -Transport dimensions: 590/640/H470 mm -Weight: 190 kg

Condition: good (used), Year of construction: 1993, Offer 23481 Technical data: - Pressure capacity 30 T - max. sheet thickness 6 mm - Max. punching diameter 105 mm - stroke 42 mm - throat 700 mm Psdpfergptiex Amlegu - maximum stroke rate 200 H/min - Table dimensions W 1500 x D 1100 mm - table height 1000 mm - Drive 400 V / 4 kW - Space requirement approx. W 1600 x H 2000 x D 2200 mm - Weight approx. 3400 kg - with: - stop table with adjustable stops - Quick stamp change device - foot switch; - Emergency stop button - Various punches + dies in separate workbench