Used Profile bending machines - intake diameter 51-70mm for sale (41)

Listing

Request more images Request more images Already requested

4

Niederlangen

7,585 km

Section Bender

RHTC PB 50 - 3

Price info Price info Already requested Call

Condition: new, angular steel - leg outwards -- mm double T-iron on the x-axis -- mm U-iron on the x-axis -- mm 50 mm 150 mm throat 120 mm total power requirement 1,5 kW weight of the machine ca. 0,36 t dimensions of the machine ca. 1,1 x 0,8 x 1,4 m Bu0nripqxz Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Bühl

7,895 km

Profile-Bending Machine

O.L.B. Machinery RBM 3/60 SA

Price info Price info Already requested Call

Condition: used, Year of construction: 2015, shaft-ø 60 mm max. bending rolls-ø 215 mm bending capacity max. - square 50 x 50 mm bending capacity max. - flat 80 x 15 bzw. 120 x 25 mm bending capacity max. - angle 70 x 70 x 7 mm bending capacity max. - round ø 50 mm Bh9v7zjziyr bending capacity max. - round ø 100 x 2 mm number of driven shafts 3 total power requirement 2,6 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,2 x 0,85 x 1,53 m - all 3 shafts driven - - condition nearly like new - Accessories: 3 sets of bending rolls

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

A - Niederösterreich

8,383 km

section beding machine with hydraulic feed of roll

KKI Profileinrollmaschine Sahinler HPK-65

€19,020

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Shaft diameter: 180Upper Roll Diameter: 60Bottom Roll Diameter: 50working speed: 5motor power: 3length: 1200width: 850heigth: 1200weight approx.: 1000 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal and vertical working position T7xifvv2 - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 7 Screen EURO 9.000,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Send inquiry Send inquiry Already requested more

Listing

Velen

7,625 km

Punching Press - Single Column

KUNZ/BOSCHERT KST 40/750

Price info Price info Already requested Call

Condition: used, Year of construction: 1985, punching cross-cut in cmm 105 x 10 mm stroke 0 - 25 mm plate thickness 10,0 mm working area mm table surface area 1230 x 1300 mm throat 835 mm total power requirement 5,9 kW Dmwicv weight of the machine ca. 4,0 t dimensions of the machine ca. 5,3 x 2,05 x 1,6 m Punching machine - Footswitch - Emergency stop facility - Accessories see pictures

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

3

Wiefelstede

7,607 km

Profile bending machine replacement rollers 4 pcs.

unbekannt für 35 mm Rohr

€160

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine Cjuyvfy0a -Replacement rollers -Tool for: Ø 35 mm pipe -Outside: Ø 200 mm -Bore: 49mm -Quantity: 4 rolls available -Price: complete -Weight: 44kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Altdorf

8,139 km

OPK 65/85 Ostas Profile Laying Machine

Ostas OPK65

€11,999

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Year of construction: 2023, We are manufacturer for the bending rolls and have 1000 sets in stock Incl. standard set of steel rollers Description Motorized ring bending machine, can be used horizontally and vertically with 3 driven rolls and hydraulic infeed rollers are hardened hydraulic feed over both lower rolls (with 2x digital display) powerful 400 Volt motor left/right rotation by foot pedal shaft-Ø 60 mm roller-Ø top 195 mm Ca2unir2z7 roller-Ø bottom 195 mm speed 5 m/min Motor power 3 kW Electrical connection 400 V / 50 Hz Weight 1080 KG Next larger OPK 85 10900 net

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

4

Wasbek

7,654 km

Profile bending machine

KNUTH Werkzeugmaschinen KPB 61

€15,300

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Powerful production machines with hydraulic driven rollers. Bdwr9d79fvg Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Ahaus

7,617 km

Section Bender

ZOPF C-602-HE

Price info Price info Already requested Call

Condition: used, Year of construction: 2000, I - beam section - flat steel 120 x 25 (d 400) mm I-beam section - upend 80 x 15 (d 600) mm L-beam 70x70x7 (d 800) mm round material 50,0 (d 600) mm bar material dia. max. 100 x 2,0 (d 1800) mm square material 70x70x3 (d 1400) mm bending speed 6,0 U/min roll diam. toproll 215 mm Stroke length 120 mm tool adaptor Welle 60,0 mm voltage 400 V total power requirement 2,2 kW weight 1050 kg range L-W-H 870 x 1125 x 1620 mm New price with accessories approx. 20.000 euros maintained condition (!!) Furnishing : - robust electro-motor ring/profile bending machine - two driven rollers Bidurvznpa - electro-hydraulic delivery of the top roller - Digital display with memory function - Working position horizontally and vertically - Shaft storage with tapered roller bearings - Horizontal and vertical work possible - Steel machine body - Shafts made of durable steel, hardened and ground - Gears obtained from one piece - Switch box built into the base - freely movable control unit - original instruction manual * Special accessories included : - a lot of replacement/bending rollers + divided roller segments - Lateral, height-adjustable special guide rollers * Machine link : ?machineno=1008-9401259

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

A - Niederösterreich

8,383 km

section beding machine with hydraulic feed of roll

KKI Profileinrollmaschine Sahinler HPK-60

€13,915

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, Shaft diameter: 60Upper Roll Diameter: 215Bottom Roll Diameter: 215high performance hydraulic: 16working speed: 4motor power: 1,5length: 1000width: 1400heigth: 1650weight approx.: 950 Technical specifications: - Steel welded construction frame - 3 Rolls are motor driven - Hardened shafts from special steel material - Top roll hydraulic moveable up-down - Horizontal and vertical working position - Standard rolls - Guide rolls - Brake motor equipped for the precision bending - Mobile control panel Options: - Digital Readout EURO 700,-- - NC Unit EURO 7.000,-- - Angle Lateral Guide Rolls EURO 1.400,--                                                                                                                                                                                                                                                                                                                                                                                                                                                                                   HPK 50 file TypeSizeMin. DiaNotes160x10         20x10600         300Standard Rolls2100x15         50x10600         300Standard Rolls335x35         15x15600         300Standard Rolls4Ø 35         Ø 20600         300Optional Rolls5Ø 70x2         Ø 25x1,51200         400Optional Rolls62”x2,9         1/2”x2,31000         300Optional Rolls770x30x3         30x15x21500         400Optional Rolls8 50x3         20x21600         400Optional Rolls950x50x6         30x30x3600 H3ykeh2j3         400Optional Rolls1050x50x6         30x30x3900         600Optional Rolls1160x7         30x4600         400Standard Rolls1260x7         30x4700         400Standard Rolls1360x7         30x4700         400Standard Rolls14UPN 80         UPN 30800         400Optional Rolls*15UPN 80         UPN 301200         600Standard Rolls*         * Special washer (spacer) can be necessary / Only with special Beam Bending Attachment         •Capacities are given for 260 N/mm² plate yielding strength          

Send inquiry Send inquiry Already requested more

Listing

Velen

7,625 km

Punching Press - Single Column

BOSCHERT EL 750 CNC

Price info Price info Already requested Call

Condition: used, Year of construction: 1994, pressure 28 t punching cross-cut in cmm 105 mm stroke 0 - 40 mm plate thickness 12,7 mm working area 750 x 1500 mm table surface area 5300 x 1390 mm throat 850 mm total power requirement 5,5 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,3 x 2,05 x 1,6 m CNC punching machine - Footswitch - Drawer cabinet Beez0nq - many accessories see pictures

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

4

Écouflant

7,423 km

Hydraulic roller bender

Zopf ZB 60 HE

Price info Price info Already requested Call

Condition: good (used), Year of construction: 1994, Hydraulic bender with digital display Shaft diameter 60 mm Fcqmfswd0v

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Thalheim bei Wels

8,279 km

CNC - profile and pipe bending machine

PRM 70 CNC - REPANDUS

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, CNC - controlled "high-tech" precision profile and tube bending machine with one fixed upper roll and two movable lower rolls. Repeatable precision bending of profiles, tubes and solids - CNC - control based on Windows® 10 with special algorithms -... Three to five CNC - axes. Equipped with - - Touch screen and 3D color graphics - Imported DXF files are generated into working programs Beovau23q3i - Automatic calculation of path - bending time and bending force - Machine body made of cast steel - Shafts - upper and lower rollers Ø 70 mm - Shafts made of special steel - hardened and ground Bending force 190 kN Largest surmountable section modulus with standard rolls W = 35 cm³ Smallest possible bending radius with standard rolls 150 mm Roll speeds continuously programmable 1 to 15.6 rpm Drive power mechanical roll drive 4 kW Drive power hydraulic unit 4 kW Weight approx. 1,050 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool

unbekannt Rohrgröße 3/8" bis 2"

€80

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Tube bending tool: for profile bending machine Bubz0ygriw -Profile diameter: pipe size 3/8 " to 2" -Socket: Ø 15 mm -Dimensions: 635/310/H155 mm -Weight: 25 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

10

Ahaus

7,617 km

Section Bender

AK BEND APK 61

Price info Price info Already requested Call

Condition: used, Year of construction: 2007, I-beam section - upend 80x25 (d 2100) mm bar material dia. max. 70x2 (d 1600) mm L-beam 50x50x6 (d 1000) mm square material 60x60x3 (d 4000) mm I - beam section - flat steel 80x20 (d 1200) mm bar material - diameter 40,0 (d 800) mm tool taper 60,0 mm turning speeds 6,4 m/min. weight 1080 kg range L-W-H 950 x 1400 x 1450 mm only approx. 60 operating hours New price ~ 15.000 euros Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually - 3x powered rollers - divided roller segments - digital position indicator - hardened tool holder (42CrMo4) - Machine base - 2x manually adjustable side guides - Horizontal and vertical work possible - freely movable control panel - PVC plastic roller sets for pipes - CE mark / declaration of conformity Rqdn3vyo - User manual in German * Machinelink : ?machineno=1008-9401251

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

2

A - Niederösterreich

8,383 km

section beding machine with hydraulic feed of roll

SAHINLER Profileinrollmaschine 4R HPK 70

€24,025

EXW ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: new, angle iron / side length: 60 x 60 x 6double T-iron over x-axis: UPN 80 UNP 30U-iron over x-axis: UPN 65 UPN 30total power requirements: 3weight approx.: 1,4messurements (LxWxH): 1200 x 1100 x 800 Gouu3ev

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

9

Velen

7,625 km

Profile-Bending Machine

OSTAS OPK 65

Price info Price info Already requested Call

Condition: new, 50 (500) mm 45 (500) mm L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 80 x 9 (800) mm Axis diameter 60 mm work speed 5,0 m/min Tool diameter 195 mm total power requirement 3 kW weight of the machine ca. 1,0 t dimensions of the machine ca. 1,2 x 0,9 x 1,2 m Hclkqm9as Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation - Engine with braking device

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Haldenwang

8,049 km

Ring Rolling machine

Zopf ZB 100/3 H

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - three driven shafts - hydraulic adjustment of center roller Dgk28b9 - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 800 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

6

Enschede

7,601 km

Profile roller

Ostas OPK-65

Price info Price info Already requested Call

Condition: new, Year of construction: 2021, OSTAS PROFILE ROLLER TYPE OPK-65 - Axle diameter 60 mm - Lower two rollers are moved hydraulically - Three rollers driven - 2 Digital readouts Ytgi8k - Brake motor - Horizontal/vertical use - Mobile control panel - Emergency stop - Documentations - 400V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool 3 pieces

unbekannt Aufnahme: Ø 25 mm

€40

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 3 pieces -Profile diameter: 1/2 "1" 1 1/4 ", dimensions see photos -Socket: Ø 25 mm -Price: complete -Dimensions: 490/540/H190 mm Omkwr -Weight: 8 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

7

Hårlev

7,697 km

bender

Roundo SR1

€6,500

ONO plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: excellent (used), Year of construction: 1986, Rolling for bending spirals of different types of profiles. With digital positioning of the movable roller. Capacity flat iron on high edge: 50×6 mm Dqmczoe3o Max rolling resistance: 3 cm³ machine dimensions WxDxH: 1.05×0.86×1.45 m

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Kreuztal

7,743 km

hydr. spiral tube bending machine

Roundo RS 5 CNC spiralrohr

Price info Price info Already requested Call

Condition: excellent (used), Year of construction: 1994, Technical data: Hlg2xewh Special machine for the production of pipe coils hydraulically adjustable rollers bending moment: 50 cm/3 bending diameter: 500 - 3500 mm bending length: 3000 mm NC control: ROUNDO Dimensions (length x width): approx. 5500 x 1700 mm Weight: approx. 9,5 to accessories: various roller sets condition: the machine is in very good condition The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear according to the age; used machines are sold without any warranty.

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

10

Velen

7,625 km

Profile-Bending Machine

OSTAS OPK 85

Price info Price info Already requested Call

Condition: new, 75 (800) mm 60 (750) mm L-beam 80 x 80 x 8 (800) mm T - beam - web outwards 100 x 11 (1000) mm Axis diameter 80 mm work speed 6,0 m/min Tool diameter 242 mm total power requirement 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,5 x 1,05 x 1,4 m Profile bending machine with: - Foot pedal right / left - Recording: wave 50mm - with digital display - hardened special steel shafts - 1 set of standard rollers - Lower rollers are driven - Upper roll up and down hydraulically deliverable - Horizontal and vertical operation Bloqijvp3v - Engine with braking device

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Haldenwang

8,049 km

Ring Rolling machine

Zopf ZB 100/3 H NC gesteuert

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/3 H - with NC control - three driven shafts - hydraulic adjustment of center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm Ivo7koqow - angle iron leg in and out side 70x70x8 mm - weight 800 kg NC control unit: two axes controlled touch screen memorize of 1000 programs interpolation

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Mudersbach

7,748 km

Profile Ring Bending Machine

Ostas OPK 65

Price info Price info Already requested Call

Condition: new, Ostas profile ring bending machine OPK 65 Technical specifications: - tool holder, shaft: 60mm - tool: 175mm - working speed: 5m/min - Engine: 3kw - Dimensions L-W-H: 900x1250x1200mm - weight: 1080kg - 3 rollers driven Nylkh - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool 2 pieces

unbekannt Aufnahme: Ø 39 mm

€30

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces X7zvk -Profile diameter: 27/21 mm (pipe size 3/4 "/1/2") -Socket: Ø 39 mm -Price: complete -Dimensions: 145/140/H75 mm -Weight: 3.8 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

1

Sindelfingen

7,942 km

Hydraulic ring bending machine

Metallkraft PRM 60 FH Ringbiegemaschine 3812060

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Horizontal and vertical working possibility Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min 3vx8j3t0p Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

1

Haldenwang

8,049 km

Ring Rolling machine

Zopf ZB 100/2 H

Price info Price info Already requested Call

Condition: new, Year of construction: 2023, Ring Rolling machine Zopf profile bending machine model ZB 100/2 H - two driven shafts - hydraulic adjustment of center roller - digital readout with memory - working position horizontal and vertical - shafts are supported by conical bearings - slide bars - shaft diameter 60 mm Gvclbc - roller diameter 215 mm - main motor 1,5 kw - hydraulic mtor 1 kw - hydraulic pressure 18 ton - bending capacity flat material up to 80x15 mm on edge - round tube up to 100x2,0 mm - angle iron leg in and out side 70x70x8 mm - weight 720 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool

Perthel 16 - 76 mm / 3/8" bis 3 1/4"

€80

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Manufacturer: Perthel, pipe bending tool for profile bending machine -Profile diameter: pipe size 16 - 76 mm/3/8 "to 3 1/4" -Dimensions: 1020/310/H170 mm Bceecxqq -Weight: 28 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

6

Haldenwang

8,049 km

Profile bender

KBB HB 60

Price info Price info Already requested Call

Condition: as good as new (ex-display), Year of construction: 2020, bending machine model HB 60 - two roller driven - digital readout with memory Yrjazk - standard roller set knurled - horizontal and vertikal HS-Code: 8462 2998

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool 2 pieces

unbekannt Aufnahme: Ø 32 mm

€30

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool Bhq8zfsu -Pipe bending tool: 2 pieces -Profile diameter: 1x 40 mm, 1x 60 mm -Socket: Ø 32 mm -Price: complete -Dimensions: 130/270/H115 mm -Weight: 8.1 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Haldenwang

8,049 km

profilebendingmachine

Kar RH 55

Price info Price info Already requested Call

Condition: as good as new (ex-display), Year of construction: 2021, Profile Bender Hydraulic 3 Driven Rolls Modell RH 55 horizontal and vertical use - shaft diameter 55 mm - hydraulic adjustment top roll -digital readout - standard rolls B7o3c23rh3 - weight 538 kg - motor 7 hp - 400 volt 3 phase - bending capacity - round tube 70x3 mm and 76,1 mm - flat hard way 70x12 mm

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool 2 pieces

unbekannt Profildurchmesser: 65 / 49 mm

€80

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm -Price: complete -Dimensions: 405/135/H200 mm 2juhbtrn -Weight: 45.2 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Pipe bending tool

unbekannt für Rohr bis Ø 50 mm

€60

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine 2r9tva -Profile diameter: 50 mm -Radius: approx. 220 mm -Dimensions: 490/305/H60 mm -Weight: 27 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

5

Wiefelstede

(dealership location)

7,608 km

Profile bending tool 5 pieces

unbekannt Aufnahme: Ø 35 mm

€70

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Profile bending tool: 5 pieces -Profile measure: see photos -Socket: Ø 35 mm Yqnosqkc -Price: complete -Dimensions: 240/290/H210 mm -Weight: 28.7 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

8

Wiefelstede

7,607 km

Pipe bending tool 1 piece

unbekannt 3/8" Aufnahme: Ø36 mm

€15

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, tube bending tool -Pipe Bending Tool: 1 piece -Profile diameter: 3/8" -Intake: Ø 36 mm -Dimensions: 100/75/H50 mm -Weight: 1.2 kg 0oayi2lm

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

3

Wiefelstede

7,607 km

Profile bending machine replacement rolls

unbekannt für 35 mm Rohr

€85

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine Std7kw -Spare roles -Outer diameter: 200 mm -for: 35 mm pipe -Bore: 49 mm -Dimension: Ø 200 x 81 mm -Weight: 11 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Wiefelstede

7,607 km

Pipe bending tool 6 pieces

unbekannt Aufnahme: Ø 36 mm

Price info Price info Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 6 pieces Bohwve020o -Profile diameter: 32 to 80 mm, see photos -Socket: Ø 36 mm -Price: complete -Dimensions: 490/540/H190 mm -Weight: 50.1 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

7

Wiefelstede

7,607 km

pipe bending tool

unbekannt 1/2" bis 1 1/2"

€190

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Profile bending machine, bending machine, tube bending tool -Handover: in the current condition as seen -Accessories: 1 damaged pressing tool: 3/4", see photos -suitable for: pipe size 1/2" to 1 1/2" -Dimensions: 630/670/H440 mm G3s2hbvf -Weight: 36kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

12

Wiefelstede

7,607 km

pipe bending tool

unbekannt 6 bis 18 mm / 1/8" bis 3/8"

€150

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Pipe bending tool, pipe bending tool, pipe bender, pipe bender, pipe bender, hand pipe bender -Tube bending tool: with transport box -Tube diameter: 6 to 18 mm / 1/8" to 3/8" -Individual components: see photos Cfldl0si8t -Total dimensions: 800/600/H700 mm -Dimensions box: 705/145/H75 mm -Total weight: 9.2 kg

Send inquiry Send inquiry Already requested more

Listing

Request more images Request more images Already requested

15

Wiefelstede

7,607 km

pipe bender

Gedore 12 bis 28 mm bis 180°

Price info Price info Already requested Call

Condition: used, Ring bender, profile bender, bending machine, pipe bending tool, tube bender, pipe bender, pipe bender -Manufacturer: Gedore, hand-hydraulic pipe bender with transport box Q0mov -Tube diameter: 12 to 28 mm up to 180° -Stroke: 140mm -Accessories: incl. bending jaws tube size 12 to 28 mm see photos -Transport dimension: 820/260/H380 mm -Total weight: 64 kg

Price info Price info Already requested more

Listing

Request more images Request more images Already requested

11

Wiefelstede

7,607 km

Pipe bending tool 2 pieces

unbekannt Profildurchmesser: 65 / 49 mm

€80

Fixed price plus VAT

Sales inquiries Send inquiry Already requested Call

Condition: used, Ring bending machine, profile bending machine, three-roll bending machine, bending machine, pipe bending tool -Pipe bending tool: 2 pieces -Profile diameter: 65/49 mm Bokpt20he8 -Recording: dimensions see photos -Price: complete -Dimensions: 195/400/H220 mm -Weight: 42.7 kg

Send inquiry Send inquiry Already requested more

Save search query