Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, turning length: 1,500 mm, turning diameter over bed slide: 475 mm, rotational speed (max.): 4,500 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,680 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control: Fagor CNC 8055 Turning diameter over recess: 710 mm Turning diameter over cross slide: 240 mm Turning diameter over bed: 475 mm Max. turning length (with turret): 1,500 mm Spindle Bar capacity: 51 mm Recess of spindle nose: 248 mm Spindle nose: ASA D1-6 Spindle bore: 65 mm Speed range: 100 - 4,500 rpm Spindle power: 11 kW Max. torque: 29.3 kgm Tool handling Tool positions: 8 Square tool shaft height: 25 mm Shaft diameter for boring bar: 40 mm Tool holder: VDI 30 Indexing time: 0.42 s Travel paths X-axis: 260 mm Z-axis: 1,680 mm Rapid traverse speeds Rapid traverse X-axis: 15 m/min Rapid traverse Z-axis: 15 m/min Tailstock Max. workpiece weight (with tailstock): 1,500 kg Tailstock quill taper: MK 5 Drf307 Quill range: 150 m Quill diameter: 80 mm Quill taper: MK 5 Bed width: 355 mm X-axis motor: 7.3 Nm Z-axis motor: 11.9 Nm Chuck dimensions: 200/4,000 mm MACHINE DETAILS Dimensions (L x W x H): 3,520 x 1,935 x 2,022 mm Weight: 3,150 kg Foundation: 2,920 x 2,055 mm No additional tools or clamping devices included.

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 550 mm, turning diameter over bed slide: 310 mm, center height: 275 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 1,650 mm, Placing a bid obliges you to pick up the item on time by March 31, 2025! TECHNICAL DETAILS Control unit: Fagor 8055i Travel in X: 345 mm Travel in Z: 1,650 mm Turning length: 1,500 mm Center height: 275 mm Turning diameter: 550 mm Turning diameter over the slide: 310 mm Spindle Spindle speed: 80 - 3,500 rpm Spindle bore: 82 mm Drive and tool handling Motor power: 15.5 kW Drf3Wh Tool changer: 8 positions Tool holder: VDI 30 MACHINE DETAILS Dimensions (L x W x H): 3,690 x 2,225 x 2,050 mm Weight: 4,300 kg Connected load: 35 kVA No additional tools or clamping devices are included.

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, turning length: 750 mm, turning diameter: 380 mm, spindle speed (max.): 3,800 rpm, Main spindle re-bearing - 0 operating hours TECHNICAL DETAILS Turning diameter: 380 mm Turning length: 750 mm Drfe9Z Control: Manual Plus Heidenhain Spindle bore diameter: 45 mm Main drive motor power: 11 / 9 kW Main spindle speeds: 3,800 rpm MACHINE DETAILS Machine weight: 1,900 kg Machine dimensions: 2,400 x 1,600 x 1,900 mm Operating hours: 0 h (main spindle re-bearing) On time: approx. 28,600 h EQUIPMENT - Cycle-controlled lathe with electronic handwheels - Collet holder 173 E - 3-jaw chuck SCHUNK Rota S plus D = 250 mm - Follow-on steady rest - Fixed steady rest - Cooling water system with chip tray - various accessories, tool cabinet, new wear parts - PARAT 25x25 steel holder system with one holder - operating instructions

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,389 h, Functionality: fully functional, turning length: 760 mm, turning diameter: 330 mm, travel distance X-axis: 250 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 830 mm, TECHNICAL DETAILS Max. turning length: 760 mm Max. turning diameter: 330 mm X-axis: 250 mm Y-axis: ±50 mm Z-axis: 830 mm B-axis: 830 mm Main spindle speed: 5,000 rpm Counter spindle speed: 6,000 rpm Bar capacity: Ø65 mm Bxdqgrzv2Q Number of tool stations: 12 MACHINE DETAILS Weight: 5,500 kg Workpiece counter: 538,606 pieces Switch-on time: 66,394 h Cutting time: 9,389 h EQUIPMENT - Chip conveyor - Tool measuring probe - LNS Servo 2 bar loader - Accessories as per pictures

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, turning length: 900 mm, rotational speed (max.): 5,000 rpm, controller model: Siemenes 840D, Equipment: chip conveyor, TECHNICAL DATA Control: Siemens 840D Main spindle speed: 5000 rpm Counter spindle speed: 5000 rpm Distance between centers: 900 mm Travel paths B0Beiudpy0 Turret slide 1 (X/Z): 165 / 420 mm, Y: +50 / -30 mm Turret slide 2 (X/Z): 165 / 420 mm Turret slide 3 (X/Z): 165 / 640 mm Turret system Number of turrets: 3 Tool holder: VDI30 Number of driven tools: 12 ATC MACHINE DETAILS Total weight: 10,500 kg EQUIPMENT - Y-axis - Driven tools - Chip conveyor - Bar loader Tools and clamping devices are not contain

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 135391, turning length: 1,000 mm, turning diameter: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 45 rpm, tool mount: 40 mm, swivel angle C-axis (max.): 360 °, No reserve price - guaranteed sale at the highest bid! Bzjynluan3 Lathe for universal turned parts and the complete machining of complex workpieces thanks to generous flat bed guides. The high-torque drives ensure high precision and long-term accuracy. TECHNICAL DETAILS Control: OKUMA OSP-P200LA Turning diameter: 50 mm Tailstock for turning length: approx. 1,000 mm Self-centering steady rest, clamping range diameter: 4 - 64 mm Steady rest holder: fixed Door automation: LB300EX-C1000 Spindle data C-axis: 360 / 0.001° Power: 7 kW Torque: 23.7 Nm Speed range: 45 - 6,000 rpm Tool drive Tool holder: 12 places, system DIN 69880, diameter 40 x 63 mm Tool diameter: 40 mm Tool change time: 0.1 s Tool speed: 45 - 6,000 rpm MACHINE DETAILS Dimensions (L x W x H): 3,620 x 2,057 x 2,056 mm Weight: 6,150 kg Connection voltage: 400 V, 3 phases, 50 Hz Power consumption: 41.3 kVA

Condition: excellent (used), Year of construction: 2020, operating hours: 60 h, Functionality: fully functional, machine/vehicle number: A6D204605, turning diameter: 60 mm, spindle speed (max.): 4,200 rpm, travel distance X-axis: 60 mm, travel distance Z-axis: 280 mm, bar passage: 15 mm, The machine was used for training purposes and has only approximately 60 spindle hours. TECHNICAL DETAILS Travel in X / Z: 60 / 280 mm Bar capacity: 15 mm Turning diameter: 60 mm Part length with tailstock: 60 mm Swing diameter over bed: 130 mm Tool cross-section for external machining: 12 x 12 mm B8X2S2Of2I Tool cross-section for internal machining: Ø 10 mm Rapid traverse speed: 3 m/min Working feed: 0 - 2 m/min Max. feed force: 1,000 N Main spindle Max. speed: 300 - 4,200 rpm Spindle connection: EMCO Max. drive power: 1.1 kW Max. torque: 10 Nm Tailstock & turret Quill stroke: 35 mm Number of tool positions: 8 MACHINE DETAILS Spindle hours: approx. 60 h Dimensions (L x W x H): 895 x 745 x 550 mm Machine weight: 150 kg Control: Win NC Siemens Sinumerik Operate EQUIPMENT - EMCO Win 3D-View Simulation - Portable machine control panel - Workbench converted into a machine base with swivel table - Electronic handwheel - Chuck

Condition: refurbished (used), Year of construction: 2005, Functionality: fully functional, turning length: 1,500 mm, turning diameter: 520 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 280 mm, travel distance Z-axis: 1,055 mm, workpiece weight (max.): 1,200 kg, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Swing diameter over bed: 700 mm Max. turning diameter: 520 mm Spindle distance: 1,500 mm Travel X1: 280 mm Travel Z1: 1,055 mm Travel Z2: 1,090 mm Control system: Siemens Sinumerik 840D Main spindle Spindle head: DIN 55026 A2-8 Drfftp Passage through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Diameter of clamping cylinder: 315 mm Speed: 750–3,200 rpm Power (S1/S6 40%): 37/54 kW Max. torque (S1/S6 40%): 470/687 Nm Max. workpiece weight in the chuck: 400 kg Center of gravity distance from chuck: 175 mm Max. workpiece weight between chuck and tailstock: 1,200 kg Counter spindle Spindle head: DIN 55026 A2-8 Passage through the drawbar: 95 mm Inner diameter of front bearing: 160 mm Inner diameter of rear bearing: 150 mm Clamping cylinder diameter: 315 mm Speed: 500–3,200 rpm Power (S1/S6 40%): 17/25 kW Max. torque (S1/S6 40%): 324/478 Nm Tailstock Travel: 1,050 mm Min./Max. distance between spindle and tailstock: 320–1,370 mm Min./Max. Feed force: 50–2,000 daN Quill taper: MK 5 Feeds Rapid traverse X1-X2-Z1-Z2 and counter spindle: 30 m/min Ball screw X1-X2, pitch: 40 x 20 mm Ball screw Z1-Z2, pitch: 50 x 20 mm Ball screw counter spindle, pitch: 50 x 20 mm Feed force X1-X2: 1,640 daN Feed force Z1-Z2: 1,640 daN Feed force counter spindle: 1,640 daN General overhaul and maintenance - Replacement of the ball screw of the X-axis (upper turret): 2011 - Replacement of the clamping cylinder (spindle no. 1): approx. 2018 - Replacement of bearings of both spindles: 2011 - Overhaul of both turrets: ongoing EQUIPMENT - Counter spindle - 2 turrets with driven tools - Y-axis of the upper turret: start at 50 mm - Driven tools: 2 straight + 2 angled - Holders: 2 in the hole + 2 on the surface - Clamping jaws: 2x hard base jaws - Complete documentation for the machine - Replacement turret head (after complete overhaul)

Condition: not inspected (used), Year of construction: 2012, operating hours: 44,079 h, Functionality: unexamined, machine/vehicle number: 8089000198B, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, controller model: Fanuc 31i, Extensive accessories included (see pictures) TECHNICAL DETAILS Control: Fanuc 31i MSL Bar passage: 60 mm Spindle bore: 65 mm Maximum spindle speed: 5,000 rpm C-axis: available Counter spindle: 5,0000 rpm MACHINE DETAILS Total weight: 3,500 kg EQUIPMENT - Hinged belt chip conveyor Drfg02 - Bar loader preparation - Driven tools for drilling and milling - Double tool holder - Tool holder 20x20 mm for slide and reverse machining - Drill holder for turret (diameter 32 mm) - Collet holder for main and counter spindle - Collet chuck ROEHM KFD HS 112-3 - Software for tool wear monitoring for Fanuc - Bar loader is not included delivery included

Condition: ready for operation (used), Year of construction: 2019, Control Unit Brand FANUC Model 30i-B Main Drive Number of axis 12 Movement X-Axis Movement 50 mm Y-Axis Movement 50 mm Z-Axis Movement 100 mm Turret Number of turrets 1 Additional Equipment Chip Conveyor, Hinged Type High Pressure Device: 0.25/5/12 MPa Oil Mist Collector for Oil/Emulsion Bvx8Apkyxw Chiller System for Machine & High Pressure Device Cooling This 12-axis DMG MORI Multisprint 36 multi-spindle turning machine was manufactured in 2019. Ideal for complex turning operations, it offers precision and efficiency. If you are looking to get high-quality turning capabilities, consider the DMG MORI Multisprint 36 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2022, Doosan DBM 2030 Bridge Mill B87T9W8Wze Double Column and Bridge Type Machining Center Installed 2022 Control: Fanuc 31i-B, 15" Screen Contact us for specifications

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter: 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Blffxzwqtrv Pendant Controller Chip Auger Stack Light

Condition: like new (used), Year of construction: 2021, operating hours: 470 h, Functionality: fully functional, machine/vehicle number: D4D210301, turning diameter over cross slide: 190 mm, spindle bore: 50 mm, turning diameter over bed slide: 340 mm, center height: 170 mm, spindle speed (max.): 3,000 rpm, The machine was used for training purposes and has only approximately 460 spindle hours. TECHNICAL DETAILS Center distance: 700 mm Center height: 170 mm Swing over bed: 340 mm Swing over cross slide: 190 mm Sliding movement of the longitudinal slide: 600 mm Drgfrv Sliding movement of the cross slide: 220 mm Sliding movement of the top slide: 110 mm Turning tool cross-section: 20 x 20 mm Drive motor power: 5.3 kW Main spindle Spindle nose: CAMLOCK DIN 55029 S5 Spindle bore: Ø 50 mm Max. faceplate diameter: 200 mm Max. chuck diameter: 200 mm Spindle speeds: 40 - 3,000 rpm Speed control: Continuously variable Speed levels: 4 Speed ranges: 40 - 130, 110 - 360, 310 - 1,070, 870 - 3,000 rpm Feed range Longitudinal feeds: 0.045 - 0.787 mm/rev Cross slide feeds: 0.023 - 0.406 mm/rev Thread cutting range Metric thread: 20 (0.4 - 7.0 mm) Tailstock Quill diameter: 50 mm Quill inner taper: MT 3 Quill stroke: 120 mm Lateral adjustment: ±13 mm Permissible workpiece weights Exposed: 50 kg With tailstock: 150 kg MACHINE DETAILS Spindle hours: approx. 460 h Dimensions (L x W x H): 1,650 x 1,060 x 1,635 mm Turning spindle above floor: 1,103 mm Total weight: 755 kg Sound pressure level: 79 dB(A) Power supply: 400 - 440 V EQUIPMENT - 3-axis digital display - Continuously variable speed control - Röhm ZS Ø200 three-jaw chuck (soft jaws, internally and externally stepped) - 5 x B25/120 quick-change tool holders - Tool set - Fixed center MT 5 - Turning tool set (3 x standard, 1 x parting-off)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Ccmdjkwn2M Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: good (used), machine/vehicle number: 11000554-E, Barrett Chip Spinner B2Jafz78E8 S/N: 11000554-E

Condition: good (used), Year of construction: 2007, machine/vehicle number: 8580-20, Equipped with: Fanuc PNC Deco Whirler IEMCA GN120-37 Bar Feed Coolant Tank Chip Conveyor CE Mark Specifications: Blfgqdrnnb0 Sliding headstock (axis Z1/C1) Max. bar passage o 20 (25,4) mm Length of parts - guide bush turning 200 mm Programmable spindle rotation speed 100-10000 rpm Positioned indexing and stop, increments 0.1 degree Max. spindle power 3.7 (5.5) kW Guide bush holder (X1/Y1) (X2/Y2) Number of tools in the guide bush (fixed or turning) 2 x 5 Tool section 16 x 16 mm Number of cross millers/drillers in the guide bush 4 Programmable rotation speed 100-8000 rpm Max. power of turning spindles 1.5 (2.2) kW End unit (X3/Y3) Max. number of end tools (fixed or turning) 4 Programmable rotation speed 100-6000 rpm Max. power of turning spindles 1.5 (2.2) kW Counter-spindle and back-operation (X4/Y4/Z4/C4) Max. diameter clamping capacity 20 (25.4) mm Standard length of parts 200 mm Programmable rotation speed 100-10000 rpm Positioned indexing and stop, increments 0.1 degree Max. number of back-operations Number of fixed and turning spindles 7 Programmable spindle rotation speed 100-8000 rpm Max. power of turning spindles 1.5 (2.2) kW

Condition: like new (used), Year of construction: 2015, operating hours: 272 h, Functionality: fully functional, machine/vehicle number: S4E150081, turning length: 510 mm, turning diameter over cross slide: 300 mm, travel distance X-axis: 160 mm, travel distance Z-axis: 510 mm, rotational speed (max.): 6,300 rpm, turning diameter over bed slide: 430 mm, Machine with C-axis, driven tools, and bar feeder! The machine was used for training purposes and has only 272 spindle hours. TECHNICAL DETAILS Swing diameter over bed: Ø 430 mm Swing diameter over cross slide: Ø 300 mm Max. turning length: 510 mm Control: Siemens Sinumerik Operate Travel range Travel in X: 160 mm Travel in Z: 510 mm C-axis: 360° Main spindle Draw tube inner diameter / spindle bore: Ø 45 mm / Ø 53 mm Speed range: 0 - 6,300 rpm Spindle torque: 78 Nm Spindle bearing (inner diameter): Ø 80 mm Drive power: 8 / 13 kW Tool changer Number of tool positions: 12 Spindle shank: VDI 30 Tool cross-section for Square tools: 20 x 20 mm Shank diameter for boring bars: Ø 32 mm Number of driven tools: 6 Torque: 16 Nm Drive power: 4 kW Drives Rapid traverse speed X / Z: 24 / 30 m/min Rapid traverse speed C: 250 rpm Feed force in the X-axis: 4,000 N Feed force in the Z-axis: 6,000 N Positioning range Ps (according to VDI 3441) X / Z: 0.003 / 0.003 mm Tailstock Tailstock travel: 510 mm Max. contact force: 6,000 N Internal taper for holding the live center: MK 4 B8Uj89Ftve MACHINE DETAILS Spindle hours: 272 h Height of the rotary axis above floor: 1,100 mm Machine height: 1,958 mm Machine footprint (W x D): 2,275 x 1,790 mm Total weight: 3,300 kg Coolant system: 250 l Pump output at 3.5 bar: 0.57 kW Flow rate at 3.5 / 1 bar: 15 / 65 l/min EQUIPMENT - Programmable tailstock - emco LM800 bar loader - Hollow clamping cylinder including draw tube - Machine light - Coolant system - Electronic handwheel - Cleaning gun/Multiflow - Pneumatically automatic parts catcher - Fully automatic machine door - Chip conveyor - Extensive tool set - Three-jaw chuck

Condition: good (used), Year of construction: 2001, Tornos DECO10A CNC Swiss Lathe. Mfd. 2001 9-Axis Control: Fanuc 16ITA Robobar Bar Feed: SSF-226 Machine in good working condition Drdl8P

Condition: good (used), Year of construction: 2007, INDEX MS22C, Mfd. 2007, Assorted Tooling, 10-ft IEMCA SIR Bar feed, Excellent condition Buypifmpv3 Contact us for full details

Condition: good (used), INDEX MS22-8 1 INDEX C200-4 D SL control 2 NCU - Number of spindles: 8 - Bar diameter: 22mm Bk020Hs9Yte - Spindle power: 15 kW - Spindle speed: 10,000 rpm Control: INDEX C200-4 D SL controller With IEMCA SIR Bar Feed (10ft) 1 Pickup Attachment - Number of spindles: 8 - Bar diameter: 22mm - Spindle power: 15 kW - Spindle speed: 10,000 rpm - 1.1 Slide units: X and Z axes controlled by CNC - 1.2 slide units: X and Z axes controlled by CNC - 2.1 slide units: X and Z axes controlled by CNC - 2.2 slide units: X and Z axes controlled by CNC - 3.1 slide units: X and Z axes controlled by CNC - 3.2 slide units: X and Z axes controlled by CNC - 4.1 slide units: X and Z axes controlled by CNC - 4.2 slide units: X and Z axes controlled by CNC - 5.1 slide units: X and Z axes controlled by CNC - 5.2 slide units: X and Z axes controlled by CNC - 6.1 Slide units: X and Z axes controlled by CNC - 6.2 slide units: X and Z axes controlled by CNC - 7.1 Slide units: X and Z axes controlled by CNC - 7.2 slide units: X and Z axes controlled by CNC - 8.1 slide units: CNC-controlled swivel axes and Z-axes - 8.2 slide units: X and Z axis controlled by CNC - 1 set of draw collet holders - 1 bar loading magazine IEMCA SIR MS 22.8/33/F bundle with drilling station - 1 synchronous spindle in SL 8.1 with flushing and ejector as well as jaw chuck - Back drilling station for 3 fixed tools in SL 7.1 or 8.2 - 1 workpiece removal through a chute in SL 8 with a conveyor belt within the machine - 1 preparation for air/oil lubrication for drive devices - 1 electrical preparation, double module for SL 1,2,3 and 4 with electronic shaft - 1 electrical preparation, double module for SL 5,6,7 and 4 with electronic shaft - 1 flap for suction - UNICOOL EA interface - UNIMESS interface - 16 freely programmable inputs and outputs - CO2 fire extinguishing system - Hinged belt conveyor - High pressure pump 80 bar - Preparation for central cooling water supply - 6 double holders - 6 base plates - 1 catch - 2 The engine

Condition: excellent (used), Year of construction: 2020, Doosan Puma TT2100SYY Mfd. 2020 Tooled as pictured Bar feed: FMB Turbo 565 (12ft) Mfd. 2019 Specifications SWING OVER BED 9.05" MAX CUTTING DIAMETER 9.05" DISTANCE BETWEEN CENTERS 38.5" X-AXIS TRAVEL 6.5" Y-AXIS Yes Y-AXIS TRAVEL 3.93" Z-AXIS TRAVEL 27.5" C-AXIS INDEXING FULL CONTOURING C-AXIS CHUCK SIZE 8" BAR CAPACITY 2.625" SPINDLE NOSE A2-6 SPINDLE MOTOR 35 hp SPINDLE SPEED 5,000 RPM RAPID TRAVERSE RATE - X-AXIS 1,181 in/min. RAPID TRAVERSE RATE - Z-AXIS 1,575 in/min. SUB SPINDLE Yes SUB SPINDLE - CHUCK SIZE 8" SUB SPINDLE - BAR CAPACITY 2.56" SUB SPINDLE - SPINDLE NOSE A2-6 SUB SPINDLE - SPINDLE MOTOR 25 hp SUB SPINDLE - SPINDLE SPEED 5,000 RPM SUB SPINDLE / W-AXIS TRAVEL 28.7" TURRET CAPACITY 12 TURRET TYPE BMT55 LIVE MILLING Yes LIVE MILLING SPEED 5,000 RPM LIVE MILLING MOTOR 10 hp TURRET 2 CAPACITY 12 TURRET 2 - X-AXIS TRAVEL 6.5" TURRET 2 - Z-AXIS TRAVEL 27.56" Dimensions 93" X 153" (W/CONVEYOR - 186") X 88.6"H Weight 20,940 LBS Equipped With FANUC OiTF CNC CONTROL DOOSAN EZ GUIDE i PROGRAMMING TWIN 12 POSITION TURRETS UPPER AND LOWER, W/24 POSITION INDEXING ON EACH TURRET WITH BASE MOUNT TOOLING SYSTEM MP SYSTEMS 1000 PSI HIGH PRESSURE COOLANT Y-AXIS ON BOTH TURRETS (2) INTEGRAL SPINDLES FULL CONTOURING C-AXES ON BOTH SPINDLE MILL/DRILL ON UPPER AND LOWER TURRETS PARTS CATCHER LEFT AND RIGHT PROGRAMMABLE PARTS UNLOADER PARTS CONVEYOR BAR FEED INTERFACE 8" 3-JAW KITAGAWA CHUCK FOR LEFT AND RIGHT SPINDLES (COLLET SYSTEMS IN ON MACHINE NOT INCLUDED IN SALE) (2) X-AXIS LIVE HOLDERS (2) Z-AXIS LIVE HOLDERS STANDARD FACTORY STATIC TOOLING DOOSAN TOOL LOAD MONITORING SYSTEM AIR BLAST SYSTEM FOR CHUCK CLEANING SPECIFICATIONS: Rs7Jeqjai Machining Length     27.38"

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 300565, Tsugami SS327-5AXIII Mfd. Nov. 2020 Fanuc Series 31i-Model B5 IEMCA Boss 338 HD Run less than one shift Cut Steel Rmsihqf3E Standard tooling included

Condition: good (used), Year of construction: 2013, machine/vehicle number: 003A0003, INDEX G220 CNC Turn-Mill Center Mfd. 2013 (Installed 2019) s/n 003A0003 Siemens SL CNC Control 12 Station Turret Main Spindle Sub Spindle Milling Spindle Milling Spindle speed: 15,000 RPM 170 ATC INDEX MBL Bar Feeder Knoll Mdl. 450K-1 Chip Conveyor (Mfd. 2014) Ch2V8W8Sww 150/750 Fluid Cleaner, ISI Industries Mist/Dust Collection System, Hours: 4,579 Comes with tooling, and extra rebuilt milling spindle

Condition: excellent (used), Year of construction: 2018, EMAG VL 3 DUO CNC Twin Spindle, Vertical Turret Lathe Mfd. 2018 S/N 1100619, EMAG CNC control, (2) 12-station turrets, Chip conveyor, Dqkvor Full automation system Hennig system Hours: 4,684 2 Machines Available 110612, (2) w/Hennig Mdl. 102783 chip conveyor, full automation system, 4,684 and 7,401 hours.

Condition: excellent (used), Year of construction: 2018, TSUGAMI B0326E-II Mfd. 2018 212 working hours 3-meter Boss 332E IEMCA bar feeder Chip Conveyor Vacuum system Machine in mint condition TSUGAMI sliding headstock lathe type B0326E-II CNC Fanuc 32i-B including : - Main spindle and counter-spindle diameter 32mm, 8000 rpm. - Independent motorized guide bush holder (Z stroke: 320mm), using guide bushes ref. NEUKOMM 28.001 - Workpiece ejector on counter-spindle (from front) - 8 axes: X1/Y1/Z1/X2/Y2/Z2/C2 - Parts reclaimer with conveyor belt - Kit for use of machine without guide bush - High-pressure pump (20bar), distribution via pilot valves - Chip conveyor - Rigid tapping - RS232C interface - Bar feeder interface - 4 radial rotary tools on front comb, speed 5000 rpm. - 2 radial rotary tools on rear comb, speed 5000 rpm. - 1 double-outlet, double-sided axial rotary tool with angular adjustment - 4 axial rotary tools (and/or 8 fixed positions) on rear comb, speed 5000 rpm. - 5 fixed tool holders on front comb, 16 mm square - 2 fixed toolholders on rear comb, 16 mm square - 5-position gooseneck - 2 positions for deep drilling, length 100 mm - Detection of cut-oƯ tool breakage - Main and counter spindle collet holder F37 76-740 - 3-color light column - CE standard Ref. 100-032 LINA purifier, 500 m3/h, 400V, 50 Hz, including : - Inlet pipe, inner Ø: 125.5 mm - 150-002: Lina HEPA filter support 457 x 457 mm - 200-003: HEPA filter H13 457 x 457 x 292 mm - 350-010: Siemens main switch - 250-012: Lina support stand, height 1850 or 2750 mm - 600-014 : BLUE LINE pump CIP 100-240V 50/60 Hz AC // 24V DC, (Cleaning In Place) Programmable automatic cleaning system for cutting fluid systems. With Bsiyplkyfpo 4m hose and non-return valve. - CLR-1000-250: Lina anti-vibration mounts. Set of 4. - 300-023: Lina sieve, external Ø 195 mm - CLR 1000-928: Lina suction collar Ø 125 mm - CLR 1000-330: Lina flexible hose Ø 130 mm (Qty: 4) - CLR 1000-340: Lina oil return hose Ø 19 mm (PU 4) - CLR 1000-334: Lina hose clamp Ø 60-215 mm for CLR 1000-330 + CLR 1000-333 flexible hoses - 450-001: Ø 19-24 mm Lina hose clamp compatible with LR 1000-340 oil return hose FIREDETEC_5 FIREDETEC DIMES ANTI-FIRE SYSTEM 5KG CO2 - 1 cylinder equipped with automatic release system, with permanent CO2 charge control - 1 set of cylinder holders - 1 central warning siren with flash for DIMES system - 1 set of FireDetec detector tubes - 1 set of extinguishing pipes and hoses - 1 manual extinguishing control box - 1 pressure switch for automatic machine tool shutdown when extinguishing - 2 CO2 diƯusers - 1 FireDetec tube pressure control gauge - 1 set of small miscellaneous supplies