Used section steel shears 50 - 79t punching power for sale (63)

Condition: ready for operation (used), puncher 50.0 t square edge steel 40.0 x 40.0 mm round bar steel 40.0 mm L-beam 120 x 120 x 10 mm hole punching press: capacity (dia. x thick.) Ø 28.0 x 13.0 mm shear: flat material 300 x 15 / 200 x 20 mm throat 250 mm work stroke 60.0 mm work height max. 1085 mm total power requirement 4.0 kW weight 1320 kg range L-W-H 1600 x 800 x 1680 mm Iodpfx Aoxz Hhujf Nea Current new price approx. 20.000 euros Special price on request Equipment: - Electro-hydraulic section steel shears with 4x work stations * Flat steel shears * Section steel shears * Hole punch * Notching station - Driven by two hydraulic cylinders - Stepless stroke adjustment - Support table at hole punching & notching station - Material scraper - Side storage options - 2x freely movable foot switches - Various punches + dies (see image 9) - Operating instructions (PDF)

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm Iodpfx Afst D Nz As Noa shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: ready for operation (used), functionality: fully functional, Peddinghaus Peddycut 275 6-way combined section steel shear Available immediately from site: Peddinghaus section steel shear Type Peddycut 275 Year of manufacture 1987 Pressure capacity 27 tons Table 400 x 250 mm Thrust 90 mm Power 10 mm Drive 1.5 kW Strokes/min 15 Flat steel 50 x 15 mm Angle steel 65 x 6 mm Round steel 28 mm Square bar 25 mm Knife pitch 175 mm Punch stroke 24 mm Punches 20 mm in 19 mm or 30 mm in 6.5 mm sheet Isdpewfdbpjfx Af Nsa Foot switch Various punches Transport: from site

Condition: ready for operation (used), Year of construction: 1992, Hydraulic Profile Steel Shear Peddinghaus Hydraulic machine with 5 workstations for punching, notching, and shearing flat bar, angle iron, and solid material. Punch activation via hand lever, profile steel shear with foot pedal. Punch throat: 510 mm Pressing force: 60 tons Throat depth: 510 mm Cutting capacity: 500 x 12 or 400 x 16 mm Punching diameter: 27 mm in 17 mm Punching diameter: 39 mm in 12 mm Round steel: 45 mm Square steel: 40 mm Isdpfox Ab Dyex Af Nsa Angle steel: 120 x 13 mm Flat steel: 500 x 12 mm Drive power: 7.5 kW Oil capacity: 80 liters Weight: 3 t Price: €4,500 plus VAT, ex location

Condition: used, functionality: fully functional, Year of construction: 2002, Pressure, tn: 50 Punching capacity: Ø40 mm. in 10 mm. Throat/reach: 250 mm. Flat bar: 300 x 15 mm. Round bar: Ø40 mm. Square bar: 40 x 40 mm. Angle iron: 120 x 120 x 10 mm. Notching unit: Triangular. Year: 2002 Country of origin: Spain. Size (L x W x H): 1900 x 1550 x 1750 mm. Weight: 1.400 kg. With triangular notching station and 1000 mm. electrical length stop. All our used machines are tested and serviced before delivery. Isdpoxyxtaofx Af Nea

Condition: new, messurements (LxWxH): 1520 x 950 x 1780weight approx.: 1,440total power requirements: 4square steel bar: 35round steel: 40cutting pressure: 60throat depth: 220flat steel shear: 200 x 20 oder 300 x 15notching (strenght x width x depth): 10 x 42 x 100punching - round: 28 x 15 oder 38 x 11 oder 110 x 3angle iron cutting 90° or 45°: 120 x 120 x 12 oder 80 x 8 Ijdpod Ab Hyefx Af Nja  5 working stations  one foot pedal  hydraulically driven  table at punching and notching station with gauge  user manual in GERMAN and ENGLISH

Condition: as good as new (ex-display), Year of construction: 2024, Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Bending capacity: Fixture up to max. 100x10 mm Isdexyyzxspfx Af Noa Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: good (used), punching force: 55 t, - Capacity 55 tons - Hydraulic - 5 stations Isdpfjt Rtbgox Af Nsa - Electric back gauge - Central lubrication system - Double acting - Foot control - Emergency stop - Documentation - 400V

Condition: used, Year of construction: 2005, round bar steel 32 / 17 mm square edge steel 30 x 18 mm L-beam 100 x 8 mm punching pressure 50 t weight of the machine ca. 900 kg dimensions of the machine ca. 1000 x 700 x 1700 mm Features: - Flat steel shears Cuts flat steel: up to 350 x 13 mm L-steel, 45° cut: up to 100 x 8 mm Ijdjwu Hkfspfx Af Nja Blade cutting length: 370 mm Working height: 734 mm - Profile and bar steel shears Shear cross-section: max. 1550 m² Stroke, infinitely adjustable: 10 - 36 mm - Shears with standard blade 90° L-steel 90° cut: up to 100 x 8 mm Round steel: 32 + 17 mm Square steel: 30 x 18 mm U-steel, 90° cut: up to 100 mm Double-T steel, 90° cut: up to 100 mm Working height (center of blade cross): 1044 mm - Notcher with square notcher U-steel, in flange: 80 - 120 mm Double-T steel, in flange 80 - 120 mm Notch width: 44.5 mm Notch depth: 50.0 mm Working height: 1000 mm

Condition: used, functionality: fully functional, Year of construction: 1987, Punching Machine + Profile Steel Shear Mfr. Peddinghaus Type: Peddimaster 40/60H Year: 1987 Technical Data Ijdpfx Ajxp Ndhef Noa Manufacturer: Peddinghaus Model: Peddimaster 40/60H Year of manufacture: 1987 Shearing force: 60 t Punching force: 40 t Profile steel shear: L- and T-angles at 90° 100 x 10 mm at 45° 65 x 8 mm Notching unit with square notcher for sheet metal up to 10 mm Flat bar shear for flat steel 380 x 8 mm or 150 x 14 mm Weight: approx. 1.5 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Electric back gauge 3000 mm - Stop table - Adjustable hold-down - Large tool package as per photos All information given without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2007, Pressure, tn: 50 Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 177 mm. Flat bar: 350 x 15 mm. Round bar: Ø35 mm. Square bar: 30 x 30 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Square. Flatbar bender: 100 x 10 mm. Ijdpoxxkiqofx Af Nsa Year: 2007 Country of origin: Spain. Size (L x W x H): 1900 x 1300 x 1750 mm. Weight: 1.000 kg. With 1000 x 10 mm. flatbar bending station, sqaure notching station and 1000 mm. electrical length stop. Machine uses tool size 6. All our machines are tested and serviced before delivery.

Condition: new, cutting pressure: 55weight approx.: 1.520heigth: 1880motor: 5,5width: 1500length of knive: 317throat depth: 255stroke: 60  5 working stations  one foot pedal  hydraulically driven  Iodpfx Afettc Upo Noa table at punching and notching station with gauge  user manual in GERMAN and ENGLISH

Condition: as good as new (ex-display), Year of construction: 2023, Incl. control for entering the bending angle. Strokes per minute with 15 mm stroke 34 /min. Punching force 500 kN Hole diameter and thickness up to max. 27x13 or 20x18 mm Flat steel (2 inclinations) up to max. 350x10 mm Flat steel (5 inclination) up to max. 350x15 mm 90 degree angle steel up to max. 80x80x8 mm Bar steel up to max. 35 mm Square steel up to max. 30 mm Notching up to max. 10 mm Iedsxyyy Uspfx Af Nja Bending capacity: Fixture up to max. 100x10 mm Motor power 3.0 kW Net weight 950 kg Gross weight 1150 kg

Condition: good (used), punching force: 50 t, - Capacity 50 tons - Hydraulic - 5 stations - Double-acting Ijdpfx Aerhw D Rjf Nja - Foot control - Emergency stop - With punching - 400V

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS • Punching capacity: 500KN / 50Tn • Punching: Ø31x12mm Isdpfxjdx Rd Us Af Nea • Strokes per minute (15mm travel): 34 • Throat deep: 177mm • Stroke: 50mm • L angle at 90⁰: 80x80x8mm • Flat bars: 350x10mm • Round bars: Ø35mm • Square bars: 30mm • Triangular notching: 90x42x10mm • Bending station: 100x10mm • Motor: 3KW • Net weight: 950Kg

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 60 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to Isdpfx Asu Icmhef Nsa -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, functionality: fully functional, Year of construction: 2007, Pressure, tn: 50 Iodjxvq Unepfx Af Noa Punching capacity: Ø28 mm. in 13 mm. Throat/reach: 177 mm. Flat bar: 350 x 15 mm. Round bar: Ø35 mm. Square bar: 30 x 30 mm. Angle iron: 80 x 80 x 8 mm. Notching unit: Triangular. Flatbar bender: 100 x 10 mm. Year: 2007 Country of origin: Spain. Size (L x W x H): 1900 x 1300 x 1750 mm. Weight: 1.000 kg. With 1000 x 10 mm. flatbar bending station, triangular notching station, 1000 mm. manual length stop and misc. used punching tools. Machine uses tool size 6. All our machines are tested and serviced before delivery.

Condition: new, cutting pressure: 65weight approx.: 1.600heigth: 1880motor: 5,5width: 1700length of knive: 10throat depth: 305stroke: 55  5 working stations  one foot pedal  hydraulically driven  Iedsttc Utspfx Af Nea table at punching and notching station with gauge  user manual in GERMAN and ENGLISH

Condition: new, Year of construction: 2024, 5 workstations for flat material, angle steel, bar steel, punch or notching, and bending station. Punch with quick-change punch device Notching station with support table Flat steel shear Profile steel shear for angles and bar steel Bending station Electric limit stop Technical data Iodpfx Ajxyyyzjf Noa Strokes per minute with 15mm stroke: 32/min. Punching force: 600 kN Throat depth: 250/500 mm Hole diameter/thickness up to max. Ø 40×11 Flat steel (2 tilt) up to max. 350×15 mm Flat steel (5 tilt) up to max. 350×15 mm Angle steel 90 degrees up to max. 120x120x10 mm Bar steel up to max. 45 mm Square steel up to max. 40 mm Notching up to max. 10 mm Bending capacity: up to max. 150×10 mm Motor power: 5.5 kW Weight Bendicrop 60SD – 2,012 kg

Condition: like new (used), punching force: 55 t, - Capacity 55 tons - Hydraulic - 5 stations - Double-acting - Foot control Iedor Hp Ezepfx Af Nea - Emergency stop - Documentation - With 20 impact sets - 400V

Year of construction: 2018, condition: new, TECHNICAL FEATURES • Punching capacity: 550KN // 55Tn • Motor: 5KW • Throat depth: “S” 250mm // “SD” 500mm • Punching capacity: Ø40x10mm o Ø20x20mm Iodpfx Asdx Rdiof Nsa • Strokes per minute (20mm travel): 37 • Flats cutting up to: 300x15mm o 200x20mm • Angle cutting at 90⁰: 120x120x10mm • Angle cutting at 45⁰: 70x70x7mm • Round & square bar cutting: Ø y ÿ: 40mm • Notching station: 90x42mm (espesor 12mm)

Condition: good (used), Year of construction: 1991, machine/vehicle number: 4073756691005, Offer 25360 Technical Data: - Sheet and flat bar shear, blade length: 175 mm - Cuts flat steel up to 100 x 15 mm or up to 150 x 10 mm - Profile and bar shear: - Cuts angle steel up to 80 x 8 mm - Cuts round steel up to 32 mm - Cuts square steel up to 30 mm - Punching station: - Punching force: 360 kN - Stroke: 10 to 32 mm - Throat depth: 155 mm - Punches steel up to 20 mm Ø in 14 mm - Or up to 27 mm Ø in 10 mm - Drive: 400 V / 3 kW - Foot pedal - Space requirement approx. W 800 x H 1600 x D 855 mm - Weight approx. 600 kg Ijdexupvbopfx Af Nea - Various punch and die sets included

Condition: good (used), functionality: fully functional, Year of construction: 1991, Hole punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm . Iedpfoxtqu Njx Af Nja Flat steel shears: 500 x 18 mm . Notching device with rectangular tool up to 13 mm . Profile steel shears, L-steel, 90° mm . - Machine in good original condition!! approx. 70 sets of hole punching tools . .

Condition: new, Year of construction: 2024, The machine has 5 workstations: • Punching station • Flat bar shear • Angle bar shear • Notching station • Bar steel shear (round and square) Technical data Strokes per minute with 20 mm stroke: 40 /min Iedpjxyyyusfx Af Nja Throat depth 500 mm Punching force 800 kN Hole diameter and thickness up to max. 40×14 mm Flat steel up to max. 450×15 or 300×20 mm Angle steel 90 degrees up to max. 152x152x13 mm Angle steel 45 degrees up to max. 70x70x7 mm Bar steel up to max. 45 mm Square steel up to max. 45 mm Notching up to max. 12 mm

Year of construction: 2018, condition: new, TECHNICAL CHARACTERISTICS Iedpfedx Rd Sjx Af Noa • Punching capacity: 600KN / 60Tn • Punching: Ø40x11mm • Strokes per minute (15mm travel): 32 • Throat deep: 500mm • L angle at 90⁰: 120x120x10mm • Flat bars: 350x15mm • Round bars: Ø45mm • Square bars: 40mm • Triangular notching: 100x42x10mm • Bending station: 150x10mm • Motor: 5.5KW • Net weight: 2012Kg