Condition: ready for operation (used), Year of construction: 1998, Functionality: fully functional, Laser power: 2,400 W, Sheet thickness aluminum (max.): 8 mm, Sheet thickness steel (max.): 15 mm, Travel distance X-axis: 3,000 mm, Travel distance Y-axis: 1,500 mm, Travel distance Z-axis: 115 mm, Reason for disposal: Stock clearance - collection must take place by 30.09.2024 Machine is sold with an additional laser cutting unit! Functionality/condition: functional until dismantling TECHNICAL DETAILS X-travel: 3,000 mm Y-travel: 1,500 mm Z travel: 115 mm Workpiece weight: max. 710 kg Control: based on Sinumerik 840D Axis parallel/simultaneous speeds: 60 / 85 m/min Cutting speed: 3 m/min Path dimension: 0.01 mm Position deviation: ± 0.10 mm No2B8Sss Position spread: ± 0.03 mm Laser: TLF 2400 turbo Laser power: 120 - 2400 W Wavelength: 10.6 µm Laser mode: TEM00 Frequency: 0.1 - 10 kHz Cutting gas: Oxygen O2 Sheet thickness aluminum: 1 - 8 mm Sheet thickness stainless steel: 1 - 2.5 mm Sheet thickness steel: 1 - 15 mm MACHINE DETAILS Space requirement: 9.3 x 4.6 x 2.0 m Weight: 11.5 t Compressed air connection: 6 bar Rated voltage: 400V / 3~ / 50 HZ Control voltage: 24 V Connected load: 71 kVA Total power requirement: 28 kVA EQUIPMENT - Insert for medium formats 1500 x 1500 mm - Air conditioning unit Riedel L15/21 TR2 15.00; refrigerant R22 - VARIO T 1.5 panel filter - Machine is sold with an additional laser cutting unit

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, Laser power: 300 W, Travel distance X-axis: 2,000 mm, Travel distance Y-axis: 1,620 mm, Travel distance Z-axis: 80 mm, No minimum price - guaranteed sale at the highest bid! Reason for selling: Space for new machine - machine must be collected by the end of September TECHNICAL DETAILS Laser cutting system: Mercury 1620 Laser: Rofin SCx, water-cooled, cutting head with lens Laser power: 300 W Table: Anodized aluminium cutting base Work surface: 1620 x 2000 mm Clearance height: 70 mm Material width: 1650 mm Z-travel: 80 mm C0Ulq0Njgm Speed (X-Y axis): 2000 mm/s Acceleration: 18 m/s² Resolution (X-Y axis): 0.001 mm Resolution Z axis: 0.1 mm Accuracy: ± 0.05 mm on the entire work surface Repeat accuracy: ± 0.025 mm Laser system protection class: 1 Laser source: ROFIN ScX Series 300, closed and maintenance-free Cooling circuit: closed incl. water recooler for laser Cutting head: with lens, cutting nozzle, cutting gas supply MACHINE DETAILS Dimensions: 2390 x 4150 x 1550 mm Weight: 2000 kg Machine: 380 V, 50 Hz, 32 A 3P+N+T / 15 kW Cooler: 380 V, 50 Hz, 16 A, 4 kW Suction fan: not included in scope of delivery Compressed air: 200 l/min, 7 bar, oil-free EQUIPMENT - Service set for optics - ICARO software and user manual - Shuttle table system - 2 cutting tables positioned one above the other with motorized height adjustment - Aluminum cutting base - Vacuum / suction tray for small parts and dust; suction from below is through the tray. Extraction from above is through a specially designed slot in the upper part of the machine cover - The cover closes/opens automatically before/after the job is completed CONTROL - Speed, acceleration, material thickness, laser power and frequency fully adjustable in the ICARO software - Import HPGL, DXF, BMP, CF2 ... - Execution of curves with constant speed - Execution of curves with spline interpolation - Motor load control for all X, Y, Z axes - Position and speed control using encoders - Control system specially developed for laser technology - Safety standards according to European standards (CE) The extraction system with filter is not sold.

Condition: excellent (used), Year of construction: 2010, Operating hours: 13,411 h, Functionality: fully functional, Back gauge travel distance Z-axis: 3,900 mm, Back gauge speed R-axis: 130 mm/s, Back gauge travel distance R-axis: 250 mm, Pressing force: 250 t, Stand width: 4,600 mm, Bending length: 5,100 mm, TECHNICAL DETAILS Pressing force: 250 t Sheet width: 5,100 mm Stator passage: 4,600 mm Installation height: 850 mm Stroke: 565 mm Projection: 600 mm + 200 mm Crowning: hydraulic Y rapid traverse: 130 mm/s Y-operation: 10 mm/s Y-retraction: 115 mm/s Rear stop (HA): 2H Dps8Lt X-axis travel: 700 mm Stop travel in X: 1,150 mm Positioning accuracy X-axis: 0.02 mm X-axis speed: 500 mm/s R-axis travel: 250 mm R-axis positioning accuracy: 0.1 mm R-axis speed: 130 mm/s Z1, Z2 axis travel: 3,900 mm MACHINE DETAILS Weight: 29 tons Length: 5,840 mm Width: 2,595 mm Height: 3,985 mm

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Travel distance X-axis: 1,000 mm, Travel distance Y-axis: 850 mm, Travel distance Z-axis: 750 mm, Rotational speed (min.): 35 rpm, Rotational speed (max.): 6,000 rpm, Number of slots in tool magazine: 60, Swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Travel distance - x: 1,000 mm Travel - y: 850 mm Travel - z: 750 mm Spindle speed: 35 - 6,000 rpm Number of places in the tool changer: 60 Cvobarur3O Table dimensions - longitudinal: 630 x 630 mm Control: FANUC16i EQUIPMENT - with IKZ - chip conveyor. - NC rotary table 360,000 x 0.001°

Condition: ready for operation (used), Year of construction: 2004, Operating hours: 14,354 h, Functionality: fully functional, Travel distance X-axis: 475 mm, Travel distance Y-axis: 160 mm, Travel distance Z-axis: 1,170 mm, Number of slots in tool magazine: 84, Swivel angle B-axis (max.): 210 °, Swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Dpqwrf Swing diameter over bed: 550 mm Swing diameter over cross slide: 530 mm Control system: OKUMA OSP-U100L Travel distance - x1: 475 mm Travel distance - x2: 160 mm Travel path - z1: 1,170 mm Travel distance - z2: 1,155 mm Travel path - y: 160 mm C-axis: 360° B-axis: 210° Number of positions in the tool changer: 84 Number of holders in the turret head: 12 MACHINE DETAILS Dimensions: 4,320 x 2,645 x 2,900 mm Machine weight: 12,500 kg Spindle hours: 14,354 h Switch-on time: 70,794 h EQUIPMENT - with palletizing system and robot handling

Condition: ready for operation (used), Year of construction: 2011, Functionality: fully functional, Turning length: 100 mm, Spindle speed (max.): 4,000 rpm, Spindle speed (min.): 100 rpm, Bar passage: 42 mm, TECHNICAL DETAILS Rod diameter: 42 mm turning length: 100 mm Control: MITSUBUSHI M70 Speed range - spindle: 100 - 4,000 rpm Number of axes: 4 pieces MACHINE DETAILS Cvnu7D3Bim Net weight: 3.2 tons Operating voltage: 400 V, 50 Hz Rated power: 17 kW Chip conveyor: included in scope of delivery

Condition: ready for operation (used), Year of construction: 2003, Operating hours: 11,604 h, Functionality: fully functional, Turning length: 650 mm, Turning diameter: 540 mm, Bar diameter: 75 mm, C- and Y-axis available and equipped with chip conveyor and bar loader TECHNICAL DETAILS Bar diameter: 75 mm Swing diameter: 540 mm turning length: 650 mm Control: FANUC Oi-TB Tools: driven MACHINE DETAILS Machine weight: approx. 6,200 kg Cutting time: 11,605 h Switch-on time: 61,001 h Parts counter: 251,775 pieces Dpqwnx

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Spindle speed (max.): 5,000 rpm, Travel distance X-axis: 140 mm, Travel distance Z-axis: 710 mm, Number of slots in tool magazine: 24, TECHNICAL DETAILS Travel distance - x: 140 mm Travel - z: 710 mm Cvngajczdm Control: Siemens C 200-4 Main spindle speed: 5,000 rpm Passage diameter: 65 mm Number of slots in the tool changer: 2 x 12 slots MACHINE DETAILS Rated power: 47 kW Operating voltage: 400 V, 50 Hz Mass of cabinet: 610 kg Machine mass: 6550 kg EQUIPMENT - 2 turrets - Tailstock - Bar loader: Index MBL 65 - Passive tool holder

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, Working height: 120 mm, Working width: 2,200 mm, Overall weight: 3,000 kg, Workpiece length (max.): 1,500 mm, No minimum price - guaranteed sale after the end of the auction! High-performance device for panel coaters TECHNICAL DETAILS Application: one-sided, from above Working width: max. 2200 mm Passage height: 1 - 120 mm Precision lifting gear: motor-driven Passage thickness: digital display Accuracy: 0.1 mm Diameter of counter pressure roller: 292 mm, rubberized Direct drive of the counter roller: infinitely variable Transport system: rubberized roller for workpiece lengths up to 1500 mm Dprjw7 Application unit Direct drives for application and metering roller: separate, infinitely variable Application and metering roller doctor blade: oscillating with motorized drive Bearing seats: hard chrome-plated for precise operation Dosing roller: sensitively adjustable, with digital display Material circulation Double diaphragm pump: pneumatic, for high-viscosity paint systems Disposable container size: max. 30 liters, 400 mm height Equipment: stainless steel drip pans and return channels Safety standards Directives: Complies with EC Machinery Directive and German Ex directives Fire protection: Ex-protected design for coating materials with ignition temperatures ≥ 200°C Flame protection: Effective technical ventilation to prevent ignitable atmospheres MACHINE DETAILS Total weight: approx. 3000 kg EQUIPMENT - Frequency drives for precise speed control - Electromotive lifting of the application unit - Mobile design for easy cleaning - Profibus DP connection for modern control technology

Condition: reconditioned (used), Year of construction: 2000, Operating hours: 10,355 h, Functionality: fully functional, Travel distance X-axis: 1,200 mm, Travel distance Y-axis: 850 mm, Travel distance Z-axis: 800 mm, Spindle speed (max.): 16,000 rpm, Table load: 3,000 kg, Swivel angle B-axis (min.): -90 °, Swivel angle B-axis (max.): 90 °, Swivel angle C-axis (max.): 360 °, HIGHLIGHTS - IKZ (internal cooling) - Milling spindle overhaul: motor winding, bearing, tool clamp (2022) - AXA FSB400 chip conveyor (year of construction 2021) - Compressed air preparation renewed (2023) TECHNICAL DETAILS Cusae7Iq9Q Control: HEIDENHAIN TNC 426/430 X-path: 1,200 mm Y-path: 850 mm Z-path: 800 mm B-axis: ± 95° C-axis: 0.0001° Spindle speed: 0 - 16,000 rpm Drive power: 26 kW NC swivel rotary table: Ø 520 mm Table load: 3,000 kg Table clamping surface: 2,300 x 980 mm Tool holder: HSK 63 Tool magazine: 20 slots Infinitely variable feed: 0 - 20,000 mm/min MACHINE DETAILS Total power requirement: 36 kW Machine weight: approx. 17 t Space requirement: approx. 5.4 x 4.4 x 3.1 m Operating hours: 33,325 h Spindle hours: 10,355 h

Condition: excellent (used), Year of construction: 2018, Operating hours: 9,580 h, Functionality: fully functional, Star SR 38 type B sliding headstock automatic lathe in very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 39 or by arrangement TECHNICAL DETAILS Control: FANUC 31i-B5 Number of axes: 10 pieces C-axis: on main and counter spindle Short turner: convertible Main and counter spindle collet type: E173 Guide bush unit: synchronously driven Guide bush type: T248 Slide: Linear slide Tool holder: 1 x shank 20x20 mm + 4 x shank 16x16mm X3 axis: simultaneous turning on the main side Tool holder X3 axis: 2 x shank 16x16 mm Cross drilling units: 4 x ER20 + 2 x ER20 (101-68) Drilling device for machining on the B-axis: 3 x ER16 Drilling device for end face machining: 3x ER 16 with IK (Art.20031) + 2x ER 20 with IK (Art. 85569) Drive unit: for tools for main side machining Counter spindle: for back machining Back machining: 8 x ER20 (101-05) Drive unit: for tools for rear side machining on 8 stations Workpiece ejection device: mechanical MACHINE DETAILS Machine dimensions: approx. 3,192 x 1,315 x 2,120 mm Machine weight: approx. 4,300 kg Coolant used in the machine: oil Dpp9Dz Operating hours/running time: 9580 h Loading magazine: FMB LSK 38 / 3200 Bar diameter: 5 - 38 mm (attachment variant "A") Loading magazine dimensions: approx. 4,800 x 890 x 1,800 mm Loading magazine weight: approx. 1,800 kg High-pressure system: SFB-301 eco 100 bar at 28 l/min / 200 l tank, 40 µm spin-on filter Medium: cutting oil, 4-way valve HD system dimensions: approx. 1,500 x 500 x 1,000 mm Weight HP system: approx. 250 kg Hinged belt conveyor: MAYFRAN type MT 10 Dimensions peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg Dimensions of peripherals & accessories: approx. 1,200 x 800 x 1,000 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - Parts ejection control - Blow-out device for counter spindle - Workpiece collector - Workpiece conveyor for discharging the workpieces - Separate coolant tank with level and flow monitoring - Coolant through the counter spindle - Automatic central lubrication with level monitoring - Tool box with special tools - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) - 200 tool wear corrections - Program sequence controllable via handwheel - High speed skip function for the use of touch probes - Spindle speed monitoring - Thread chasing with variable pitch - Circular arc thread cutting - Cutting edge radius compensation - Macro programming - 3D coordinate conversion - Multiple repeat cycles - Drilling cycles - Constant cutting speed for main spindle and counter spindle -Cylindrical interpolation - Polar coordinate interpolation - Polygonal turning - Helical interpolation - Rigid tapping - Z1 - Z2 Synchronous control - X1 - X3 Synchronous control - C1 - C2 Synchronous control - Synchronous rotation/phase control of the main and counter spindles

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, Machine/vehicle number: 2901102010, TECHNICAL DETAILS Operating voltage: 400 V, 50 Hz Weight: 364 kg Cpllquewc

Condition: good (used), Year of construction: 2014, Operating hours: 20,209 h, Functionality: fully functional, Clamping force: 2,000,000 N, Machine with exemplary maintenance and servicing TECHNICAL DETAILS Clamping force: 2000 kN Cylinder size AG1: 20 mm Cylinder size AG2: 16 mm Machine drive power: 45 kW Flow Box DETAILS Type: LMP 105 Manufacturer: Max Petek Serial number: S 140743 Year of manufacture: 2014 Robot DETAILS Robot: Krauss - Maffei MH 50 Designation 6 -axis: Yaskawa Type: DX 100 Operating hours: approx. 8900 h Year of construction: 2014 MACHINE DETAILS Weight: 13,300 kg Length: 6,901 mm Dpswqv Width: 2,075 mm Height: 2,240 mm + 800 mm flow box

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 2013, Operating hours: 29,623 h, Fuel type: diesel, Mast type: duplex, Carrying capacity: 15,000 kg, Lifting height: 5,500 mm, Construction height: 4,400 mm, Fuel: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity: 15,000 kg Load center of gravity: 600 mm Lifting height: 5,500 mm Free lift: 2,800 mm Mast type: Duplex Fork length: 1,400 mm MACHINE DETAILS Length: 4,850 mm Dpsxkj Overall width: 2,550 mm Overall height: 4,400 mm Dead weight: 23,580 kg Front tires type: Superelastic Front tires Size: 12.00-20 Rear tires Type: Superelastic Rear tires Size: 12.00-20 EQUIPMENT - Sideshift - Tine adjuster - Heating system - Full cab - Full free lift

Condition: ready for operation (used), Year of construction: 2011, Operating hours: 14,500 h, Functionality: fully functional, Travel distance X-axis: 850 mm, Travel distance Y-axis: 500 mm, Travel distance Z-axis: 610 mm, Spindle speed (max.): 12,000 rpm, Number of slots in tool magazine: 40, 5-axis simultaneous universal machining center TECHNICAL DETAILS Cxdfts8Yxc Control: HEIDENHAIN iTNC 530 x-path: 850 mm y-path: 500 mm z-path: 610 mm Rotary table: 400 mm Spindle speed: 12,000 rpm Drive power - spindle motor: 17/10 kW Tool changer: 40-fold Spindle holder: SK 40 MACHINE DETAILS Machine weight: 7.7 t Total power requirement: 28.5 kW Space requirement: 3 x 2.70 x 3.2 m Switch-on hours: 38,000 Spindle hours: 14,500 EQUIPMENT NC rotary swivel table Ø 400 mm 3D infrared measuring probe electric handwheel chip conveyor blast air through spindle IKZ 40bar rinsing gun direct measuring system

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Turning length: 800 mm, Turning diameter: 550 mm, Spindle speed (max.): 2,800 rpm, Spindle speed (min.): 10 rpm, Bar passage: 91 mm, TECHNICAL DETAILS Control: FANUC 18-i TB Curv7C2Fmc Speed: 10 - 2,800 rpm turning diameter: 550 mm turning length: 800 mm Rotation diameter: 800 mm Bar passage: 91 mm Chuck diameter: 450 mm Tailstock diameter: 120 mm Spindle passage: 90 mm spindle nose: A2-8 Tailstock quill stroke: 150 mm Number of tool stations: 12 pieces MACHINE DETAILS Total power requirement: 44 kW Machine weight: 8 tons

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, Machine/vehicle number: 0499(061), Turning length: 310 mm, Spindle speed (max.): 7,000 rpm, Spindle bore: 32 mm, Controller manufacturer: Fanuc, Controller model: Serie 16i-T, Number of slots in tool magazine: 10, Star SV 32 sliding headstock automatic lathe in very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Control: Fanuc series 16i-T Axes: 9 pieces Rod diameter: max. 32 mm Turning length: max. 310 mm Main spindle speed: max. 7,000 rpm Cthor7M2Wu Main and counter spindle collet type: F37 Counter spindle: for back machining Counter spindle diameter: max. 32 mm Counter spindle speed: max. 7,000 rpm Slide: linear slide Tool holder: 4-fold with shank 16x16 mm Cross drilling units: 3 x ER16 (machining stations) Turret: 10 stations MACHINE DETAILS Coolant used in the machine: Oil Machine dimensions: 2,645 x 1,405 x 1,700 mm Weight of the machine: 3,800 kg Connected load: 8.0 kVA Bar feeder: FMB TURBO 3-36 / 3200 Bar capacity: 3 - 36 mm (attachment variant "A") HP high-pressure system: SFB type 510008 / 150 bar / 4 valves / 40 µm Tank volume: approx. 80-100L Hinged belt conveyor: MAYFRAN Machine dimensions: approx. 1,700 x 2,512 x 1,700 mm Machine weight: approx. 3,800 kg Loading magazine dimensions: approx. 4,500 x 1,000 x 1,800 mm Weight of loading magazine: approx. 1,800 kg Dimensions of peripherals & accessories: approx. 1,900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg HD system dimensions: approx. 800 x 700 x 900 mm Weight of peripherals & accessories: approx. 150 kg EQUIPMENT - Workpiece ejection device: available, mechanical - Workpiece conveyor for ejecting the workpieces - Automatic central lubrication with level monitoring - PCMCIA card slot - RS 232 C interface - Small extinguishing system Kraft and Bauer and CO2 extinguishing agent container (10 kg) - CE declaration of conformity - Operating and maintenance manual - Operating tools Due to the discontinuation of the business, it is possible to purchase additional objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Year of construction: 2016, Condition: ready for operation (used), Functionality: fully functional, The spraying process guarantees cleaning success for a wide range of parts. TECHNICAL DETAILS usable space: 700 mm PH value tank 1/2: 6.5 - 11 Filling quantity tank 1/2: 280 l each Temperature: 70 °C Washing process: The wash ware is sprayed in cycles in a segmented drum with heated media. with heated media. Detergent: aqueous detergent Heating capacity tank 1/2: 18 / 12 kW Drying capacity: 11 kW Compressed air: 6 bar MACHINE DETAILS Supply voltage: 440 V, 50 Hz Total consumption: 84 A Dptmmv EQUIPMENT - Washing and rinsing device - Direct electric heating - insulation - digital thermostat - Stainless steel immersion pumps - Stainless steel nozzle systems - Coarse filter inserts - Drying device, - Segment drum with direct drive - Ultra-fine filter - Drain pump - Oil separator

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, Operating hours: 23,898 h, Fuel type: diesel, Mast type: standard, Carrying capacity: 9,000 kg, Lifting height: 5,500 mm, Load center: 600 mm, Construction height: 4,300 mm, TECHNICAL DETAILS Mast height: 4,300 mm Lifting height: 5,500 mm Load capacity: 9,000 kg Center of gravity: 600 mm Engine: Diesel Perkins Mast: Standard Forks: 200 x 70 x 1,200 mm Fork carriage width: 2,460 mm Tires: Pneumatic; front 315/80R22.5; rear 12.00-20 MACHINE DETAILS Length: 4,450 mm Width: 2,550 mm Cxdlgnahy8 Height: 2,900 mm Weight: 13,980 kg Equipment: Full cab, heating

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, Turning length: 750 mm, Turning diameter: 380 mm, Spindle speed (max.): 3,800 rpm, Main spindle with new bearings - 0 operating hours No minimum price - guaranteed sale after auction end! Dprin9 TECHNICAL DETAILS turning diameter: 380 mm turning length: 750 mm Control: Manual Plus Heidenhain Spindle bore diameter: 45 mm Motor power main drive: 11 / 9 kW Main spindle speed: 3,800 rpm MACHINE DETAILS Machine weight: 1,900 kg Machine dimensions: 2,400 x 1,600 x 1,900 mm Operating hours: 0 h (main spindle with new bearings) Switch-on time: approx. 28,600 h EQUIPMENT - Cycle-controlled lathe with electronic handwheels - Collet chuck holder 173 E - 3- Jaw chuck SCHUNK Rota S plus D = 250 mm - Rotating steady rest - Fixed steady rest - Coolant system with chip tray - Various accessories, tool cabinet, new wear parts - PARAT 25x25 steel holder system with one holder - Operating instructions

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, Turning length: 1,050 mm, Turning diameter: 550 mm, Spindle speed (min.): 30 rpm, Spindle speed (max.): 3,000 rpm, Bar passage: 102 mm, Bar diameter: 91 mm, Equipment: Documentation/Manual, TECHNICAL DETAILS Control: FANUC 21-T Speed: 30 - 3,000 rpm turning diameter: 550 mm turning length: 1,050 mm Cuq8Ua9Wui Bar passage: 160 mm Chuck diameter: 305 mm Swing diameter over bed: 700 mm Swing diameter over support: 480 mm Spindle clearance: 102 mm Spindle nose: A2-8 Rapid traverse speed X-axis: 16,000 m/min Rapid traverse speed Z-axis: 20,000 m/min Traverse path X-axis: 362 mm Z-axis travel: 1,105 mm Max. Bar diameter: 91 mm Number of tool stations: 12 EQUIPMENT - Chip conveyor - Tools / holders

Condition: excellent (used), Year of construction: 2021, Operating hours: 3,145 h, Functionality: fully functional, Operating hours of spindle: 3,144 h, Equipment: Chip Conveyor, CNC control FANUC 0i-TD with 7 axes - C-axis on main spindle and counter spindle - convertible from sliding headstock to fixed headstock turning In very good condition and with extensive equipment HFT - High-Frequency-Turning: With this revolutionary technology, you now have chip formation under control. Thanks to HFT, chip problems are a thing of the past. Can theoretically be used with all known materials. Delivery / removal: in week 35 or week 39 or by arrangement TECHNICAL DETAILS Main and counter spindle collet type: E145 Guide bush unit: T223, synchronously driven Standard equipment: Tool holder Slide: Linear slide Tool holder: 6-fold - shank 12x12mm Cross drilling attachments: 2x ER11 + 2x ER16 (331-50) Drilling device for front/rear face machining: 4 drilling quills (2x ER16 single (301-24), 2x ER16 double (421-22)) If the 4-fold drilling unit is not used, 5 cross drilling units can be used Drive unit: for tools for main side machining Counter spindle: for back machining Back machining: 4x ER16 (541-21) Drive unit: for tools for rear side machining on 4 stations Workpiece ejection device: mechanical MACHINE DETAILS Machine dimensions: approx. 2,070 x 1,177 x 1,760 mm Machine weight: approx. 1,800 kg Control switch-on time: 18,492 h Workpiece counter: 887,105 pieces Coolant pump: 2.2 bar, approx. 50-75 l/min Coolant application: Oil Loading magazine: FMB micromag 20 / 3200 attachment variant "A" Bar diameter: 0.8 - 20 mm Loading magazine dimensions: approx. 5015 x 720 x 1700 mm Loading magazine weight: approx. 600 kg Hinged belt conveyor: MAYFRAN type MT 10 High-pressure system: SFB-200eco Capacity: 100 bar at 20 l/min / 200 liter tank / 40 µm spin-on filter / 4-fold valve Medium: Cutting oil Peripheral HP system dimensions: approx. 1500 x 500 x1000 mm Weight of peripheral HP system: approx. 250 kg Dimensions periphery & accessories: approx. 1900 x 700 x 800 mm Weight of peripherals & accessories: approx. 200 kg EQUIPMENT - CE declaration of conformity - Part ejection control - Workpiece collector - Blow-out device for counter spindle - Workpiece conveyor for ejecting the workpieces - Separate coolant tank with level and flow monitoring - Automatic central lubrication with level monitoring - Tool box with special tools - PCMCIA card slot - USB interface - RJ-45 LAN interface - RS 232 C interface - Control functions included as standard - Program sequence can be controlled via handwheel - High-speed skip function for the use of touch probes - Spindle speed monitoring - Thread chasing with variable pitch - Cutting edge radius compensation - Macro programming - Multiple repeat cycles - Drilling cycles - Constant cutting speed for main spindle and counter spindle - Cylindrical interpolation - Polar coordinate interpolation - Polygon turning Cwplmgx2Si - Rigid tapping - Z1 - Z2 Synchronous control - C1 - C2 Synchronous control - Synchronous rotation/phase control of the main and counter spindles There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when purchasing several auction machines from the same seller.

Condition: ready for operation (used), Functionality: fully functional, Travel distance X-axis: 400 mm, Travel distance Y-axis: 200 mm, Travel distance Z-axis: 400 mm, Spindle speed (max.): 2,000 rpm, Spindle speed (min.): 40 rpm, TECHNICAL DETAILS Travel X: 400 mm Travel Y: 200 mm Z travel: 400 mm Table size: 700 x 285 mm Dptmkp Spindle holder: SK 40 - S20 x 2 Spindle speed: 40 - 2,000 rpm (18 steps) Feed rate: 8 - 400 mm/min (18 steps) Quill stroke: 60 mm MACHINE DETAILS Motor power: approx. 2.2 kW Mains connection: 380 Volt, 50 Hz Space requirement L x W x H: 1,300 x 1,200 x 1,650 mm Weight: approx. 1,200 kg EQUIPMENT - Vertical milling head swivels, with 60 mm pinol offset - Control cabinet adjacent

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Measuring range X-axis: 300 mm, Measuring range Y-axis: 250 mm, Measuring range Z-axis: 150 mm, Workpiece weight (max.): 25 kg, Keyence XM T2000 measuring system in very good condition and with a comprehensive function package Delivery / removal: in week 35 or week 39 or by arrangement Cwpjqtmwru TECHNICAL DETAILS Control unit: XM-1600 Measuring probe: XM-P2000 Measuring range: 300 x 250 x 150 mm Smallest display unit: Distance 1 µm / angle 0.0001° Repeat accuracy: ±3 µm Measuring deviation: ±8 µm Object table Weight load: max. 25 kg Number of measuring probes: 2 pieces Built-in display: 15-inch LCD monitor (1024 x 768) Interfaces: USB 2.0 Series A: 3 connections Environmental resistance: + 10 to + 35 °C (ISO 10360-2) (within a range of 200 × 200 × 150 mm at an operating ambient temperature of 23 ± 1°C) Functions: Setting mode, image-guided measurement, statistics and analysis, single measurement 500 (without comment elements) Basic measurement: Distance, angle, calculation, CAD distance Plane, straight line, point, circle, cylinder, cone, sphere, point - no correction, ellipse, point circle, stepped cylinder, oval, slot, corner radius, chamfer, torus, CAD comparison, free-form surface Construction: Center point, tangent point, intersection point, perpendicular, numerical input, element selection, center line, tangent, intersection line, projection line, rotation line, numerical input, element selection, center plane, parallel plane, numerical input, element selection, intersection circle, numerical input, element selection. Display: Test specifications, single object report, single object report (with component image), screen image, graphic display image, image from the touch probe camera, CSV output MACHINE DETAILS Measuring device dimensions: approx. 900 x 500 x 1000 mm Weight of measuring device: approx. 30 kg Control unit dimensions: approx. 400 x 300 x 600 mm Weight of control unit: approx. 6 kg There is the possibility of acquiring further objects such as clamping devices, tool holders, carbide tools, measuring devices, measuring machines, cooling medium etc. in high quality at a favorable price due to the discontinuation of the trade. Shipping, dismantling and loading costs can be reduced when buying several auction machines from the same seller.

Condition: ready for operation (used), Year of construction: 1999, Operating hours: 13,753 h, Functionality: fully functional, Travel distance X-axis: 1,200 mm, Travel distance Y-axis: 500 mm, Travel distance Z-axis: 800 mm, Spindle speed (max.): 7,300 rpm, Number of slots in tool magazine: 30, TECHNICAL DETAILS Control: Heidenhain TNC 426 Traverse path X: 1,200 mm Travel Y: 500 mm Z travel: 800 mm Milling head: Automatically swivels in vertical and horizontal position Dptmi7 Spindle holder: SK40 Tool changer: 30-fold Speed: 20-7,300 rpm Rapid traverse: 0-30 m/min MACHINE DETAILS Drive power: 28 kW Weight: 12 t Machine switch-on time: 50,702 h Processing time / program run: 13,753 h EQUIPMENT - with Heidenhain TNC 426 - with 30-fold tool changer