material width 500 mm
B2yioz2ox0
material thickness - 4,0 mm
feed length 0,01 - 9999,99 mm
number of rolls 2
material cross-cut 1000 mm²
Power capacity 4,6 kW
Weight 0,5 t
Dimensions (WxDxH) 1,0 x 0,8 x 1,3 m
electronic roll feed
Rolling width 70 to 280 mm
pass thickness 0.50 to 8.50 mm (9.00 mm feasible)
decoiler 400 / 500 mm
decoiler 400 / 500 / 600 mm
power 75 / 90 kW
Strip tension control
Rolling gear: Bevel helical gearbox
Type: Kestermann WH660/50
Power: 122 PS / 90 kW
Gear ratio 1 : 27.4
Shaft-mounted gearbox:
Type Kestermann SAR 300 AG
Gear ratio 1 : 1
Bckdbiuu
DAVI Promau
Type: MCB 2027
Year of construction: 01/2008
capacity mm.: 2000X20/16
HP: 25 volts: 400 Hz: 50
Sheet metal bending machine for heavy duty applications. Pre-bending the edges is not necessary.
Processing width: max. 2,050 mm
Ps0mj
Processing thickness: max. 20 mm
Upper shaft diameter: 270 mm
Lower shaft diameter: 270 mm
Motor power: 18.5 kW, 1,470 rpm, 400 V, 50 Hz
material width 20 - 335 mm
material thickness 0,1 - 4,0 mm
feed length 2 - 300 mm
operating pressure 5 - 6 bar
total power requirement kW
weight of the machine ca. t
Chydn7ni
dimensions of the machine ca. m
material width 600 mm
material thickness 0,3 - 5,0 mm
feed length 1,0 - 9999,9 mm
number of rolls 2
material cross-cut 2000 mm²
Power capacity kW
Weight 0,5 t
Dimensions (WxDxH) 1,3 x 0,55 x 0,75 m
electronic roll feed
with hydraulic intermittent lifting of the rolls
min. material width 20 mm
roll diameter approx. 120 mm
Carfbx8cau
Ataşehir Ferhat Paşa, 101. Sk. No:36, 34888 Dudullu Osb/Ataşehir/İstanbul, Türkiye
9692 km
2022
new
ZIGZAG SERVO FEEDER
ZigZag Servo Drive is used in disc-cutting operations. Zigzag servo drive models that can move in two axes for maximum waste saving are here.
Our zig-zag press feeding machines consist of 50 – 1600 mm sheet width, 0.4 – 8 mm sheet thickness, 2500 kg to 20.000 kg roll weight capacity uncoiling, straightening, and servo drive systems.
Caixn9gj98
It can be easily adapted to all kinds of presses with its body structure.
Width: max. 38 mm
Feeding length: max. 50 mm
Thickness: 0,05...1,02 mm
Strokes: max. 260 1/min
Feeding power: 90 N
W7l0unbz
can be equipped by mechnical valve or solenoid
Pneumatic tong feeder make HEILBRONN type PVS 250/100/80
machine # 205238 year of construction 1993
with attached strip straightener type RLE 27
technical data:
TONG FEED
max. belt width 250 mm
max. strip thickness 3,0 mm
feed length range 5 - 105 mm
max. material cross section 240 mm²
clamping force feed clamp 17,2 kN
corresponding to friction clamping force 34,4 kN
Clamping force holding clamp 5,6 kN
Busvlhzkda
corresponding to friction clamping force 11.2 kN
Feed force 3,0 kN
BAND STRAIGHTENE...
material width 310 mm
material thickness - 3,0 mm
feed length 0 - 9999,99 mm
number of rolls 2
roll diameter 80 mm
Material thickness at 310 mm material width 2,8 mm
material cross-cut 850 mm²
speed 104 m/min
power requirement 1,5 kW
weight t
dimensions (WxDxH) m
Grwtdcp
Servo roll feed
Ataşehir Ferhat Paşa, 101. Sk. No:36, 34888 Dudullu Osb/Ataşehir/İstanbul, Türkiye
9692 km
2022
new
Coil Opening, Straightening and Spreading Group
Designed on a Single Chassis, our Coil Opening Straightening and Servo Drive Machines are Compact Coil Opening Straightening Systems with a Processing Capacity of 300 mm to 800 mm Widths, 0.3 - 8 mm Sheet Thickness, 750 Kg to 4000 Kg Coil Weight.
Opening and Straightening on a Single Chassis
High Performance Working Speed
Servo Drive System – Trigger / Geared
Caiwznffzz
Gear Transmission System
Distance Detection Adjustment / Laser sensor
50 Diff...
material width 320 mm
material thickness 3,0 mm
feed length 0 - 19999 mm
max. opening of the feeding rolls 7,0 mm
Yui770
material cross-cut 400 mm²
Dimensions (WxDxH) 0,65 x 0,45 x 0,25 m
Weight 0,05 t
electronic roll feed
roll opening max. approx. 7,0 mm
Belt thickness max.4 mm
Kbllflzj
Strip width 300 mm
Repeatability +/- 0,05 mm
NC drive with compact control
Feed force 3000 N (300 kg)
Belt pressure max. 1,2 to
Stock thickness: 0,5 - 4,0mm
Strip width: 20 - 400mm
Cross section: max. 2.500 mm²
Diameter of rolls: 120mm
Feeding length: 0,1 – 6.500mm
Execution:
• including bracket
• Upper roll can be released hydraulic
• rolls hard chromed, each with 2 double suspension rolls
• Lateral guidings at entrance
• roller basket
• control and panel on solid stand
Hymqapr
• control Siemens S5 with panel PSS300
Including pull threw starightener
Make: ALBA
Type: SRSH 400
Stock thickness: 0,5 ...
material width 150 mm
material thickness 2,5 mm
feed length 100 mm
compressed air 6 bar
clamping force of fastening pincer 2000 N
clamping force of moving pincer 2000 N
feeding force 1200 N
weight 0,1 t
Dimensions (WxDxH) 0,35 x 0,85 x 0,5 m
Fgabpv7mi
pneumatic pincer feed
The Werktuigen Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Werktuigen. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.