Used Pressbrakes 75-99t pressure for sale (66)

BAYKAL APH-S 2606x90

Call

Condition: used, Year of construction: 2006, pressure 90,0 t Xo8r0qolk chamfer lenght 2600 mm distance between columns 2050 mm column arm 310 mm ajustment speed 80,0 mm/sec working feed 10,0 mm/sec return speed 80,0 mm/sec back stop - adjustable ca. 725 mm stroke 120 mm dayligth 475 mm table height 860 mm oil volume 130 ltr. total power requirement 11,0 kW weight of the machine ca. 5500 kg. good condition (!!) Furnishing: - electro-hydraulic CNC press brake - with DELEM CNC control model DA 66W * 2D graphical programming * automatic bending sequence calculation and collision detection * high quality color LCD screen (TFT) - swiveling operation, front left - controlled axes: Y1 + Y2 + X + R + CNC crowning - electric back gauge, on ball screws - with 2x manually adjustable stop fingers - motorized, electric CNC crowning - Upper tool holder system A (Amada), with upper wedge crowning - Lower tool holder Sysetm A (Amada) - LAZER Safe front laser protection device - 2x front, sliding support arms (sliding system) - side protective grilles - freely movable foot control - Operation manual Special accessories included: - UKB tool adapter (13x pieces) - UKB tool clamping plates (13x pieces) - split ROLLERI upper tool 85° - split ROLLERI 4V reversible die 85° * Machine link: ?machineno=1008-9308286

more

Listing

Niederlangen

7,585 km

PLACKE OPB 3 60/2050

Call

Condition: used, Year of construction: 2000, pressure 60 t chamfer lenght 2050 mm distance between columns 1550 mm dayligth 475 mm throat 255 mm stroke 165 mm working feed 9,8 mm/sec return speed 117 mm/sec ajustment speed 150 mm/sec Control DELEM DA 65 total power requirement 5,5 kW weight of the machine ca. 5000 kg dimensions of the machine ca. 2300 x 1550 x 2470 mm - DELEM CNC control DA65 - Electric back gauge (X-axis), 600 mm - hydr. Upper tool clamping Ctfx0px7 - Front light barrier - side + rear protective grilles - manually adjustable stop bar, foldable (R+Z axis) - 2x support arm - Machine feet - Operation manual

more

Listing

Kornwestheim

7,946 km

Electric press brake

Hezinger-PressLine PRCE08020

Call

total height: 330 cm, back gauge travel distance Z-axis: 1,600 mm, back gauge speed R-axis: 500 mm/s, back gauge travel distance R-axis: 250 mm, back gauge: 750 mm, installation height: 470 mm, pressing force: 80 t, total width: 2,400 cm, total length: 3,100 cm, throat depth: 300 mm, motor power: 10 W, overall weight: 8,000 kg, bending length: 2,100 mm, retraction speed: 205 mm/s, Condition: new, Year of construction: 2023, Functionality: fully functional, Equipment: Safety light barrier, Electric press brake Hezinger-Pressline model PRCE08020 Press force 800 kN Working length 2,100 mm Passage 1600 mm throat 300 mm Stroke 270 mm Installation height 470 mm Infeed speed 190 mm/s Working speed 0-10 mm/s Retraction speed 205 mm/s Dm7bwn Accuracy (Y) ± 0.01 mm Backgauge 600 mm Traversing speed 500 mm/s Accuracy ± 0.05 mm Motor power 10.0 kW Oil filling approx. n.a. Machine length approx. 3,100 mm Machine width approx. 2,400 mm Machine height approx. 3,300 mm Machine weight approx. 8,000 kg

more

Listing

Bünde

7,699 km

Press brake bending press Weinbrenner 80t 3100mm

AMADA PROMECAM ITPS 8025

Call

Condition: used, Year of construction: 1992, Operating hours: 8,502 h, pressure 80 t chamfer lenght 2500 mm distance between columns 2160 mm column arm 400 mm ajustment speed 85 mm/sec working feed 10 mm/sec return speed 80 mm/sec stroke 105 mm dayligth 370 mm table height 960 mm Number of working hours 8502 h frequency 50 Hz oil volume 70 l total power requirement 9,5 KW weight of the machine ca. 4950 kg. range L-W-H 2,9 x 1,88 x 2,2 mm Bigdhh7dym3 Condition: ready for operation Video(s) available on our website. Electric 380 Volt Back gauge motorized 625 mm Foot switch auf + ab 2-hand-control panel mit Not-Stop Upper tool Matrize Access protection hinten + seitlich Hydraulic press brake with 2-axis CNC control Delem DA 58 (new screen in 2005) for immersion depth (angle) and motorized back gauge with R-axis (vertical) and Z-axis (lateral) manually adjustable, pressure capacity 80 t, folding length 2500 mm. Construction: fixed upper beam and lifting lower beam. Upper tool extension with quick clamping, upper tool deer foot and straight, divided, 2 x matrices 1V and 2V. Machine dealer with own stock of 1600 m².

more

Listing

Wijchen

(dealership location)

7,560 km

Weinbrenner AP 80t 3100mm

Call

Condition: used, Year of construction: 1977, Press brake Model: Conventional Manufacturer:&nbsp Weinbrenner Type:&nbsp AP 80 Capacity: 80t Ckfdgpwe7v Max. working width:&nbsp 3100mm Backgauge manual Including upper-tools und multi-v! Machine-dimensions: 3100x1200x2400mm

more

Listing

Strassberg

(dealership location)

7,985 km

Bending machine

Trumpf TrumaBend V85

Call

Condition: used, Year of construction: 2000, Press capacity approx.: 85 ton Bending length approx.: 2050 mm Stroke: 215 mm Distance between the columns: 1750 mm Control: DELEM Joynsfevyv Dimensions L x W x H: 2650x2300x2900 mm Weight of machine approx.: 9050 kg Standard configuration - 4-axis backgauge

more

Listing

Friesenheim

7,898 km

AMADA PROMECAM HFE M2 8025L 8-Axes

Call

Condition: excellent (used), Year of construction: 2013, Press brake Amada HFE M2 8025L 8-Axes(2013) Manufacturer: Amada Type: HFE M2 8025L 8-Axes Year of manufacture: 09/2013 Switch-on hours: 3288h Load hours: 1000h Control system: AB-PAD STEUERUNG Maximum pressing force 800kN Maximum stroke 350mm Folding length 2570mm throat 420mm Opening 650mm Stroke 350mm Working height 960mm Distance between the uprights 2125mm Rated current - 16.2A Noise level - 74dB (A) Voltage / frequency - 400V / 415V / 50Hz Number of phases - 3 Power consumption - 9kW Length - 3800mm Width - 2445mm height 2540mm Weight approx. 5600Kg Digipro angle measuring device Manual quick clamping (S-Grip) Fzgdl3w Electronic handwheel Safety devices LED lighting

more

Listing

Králova 279/9, 616 00 Brno-Žabovřesky, Tschechien

8,348 km

TRUMPF TrumaBend V85

Call

Condition: excellent (used), Year of construction: 2000, In good technical condition and fully functional. Year of construction 2000. Cyjnlyfi2w Pressing force 850 kN Stroke (max.) 215 mm. Operating pressure (max.) 340 bar. Press weight 7900 kg.

more

Listing

Großrudestedt

7,911 km

CNC press brake

YAWEI PBH80/2550-4C

Call

Condition: new, Year of construction: 2023, Operating hours: 0 h, New IMMEDIATELY available CNC press brake YAWEI PBH80/2550-4C - Pressing force: 800KN - max. bending length: 2550mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - Upper tool clamping - mechanical quick clamping type Amada - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides Cirrmer7jm - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training

more

Listing

Pressbaum

(dealership location)

8,395 km

Press brake bending press LVD 80t 3000mm

EHT

€6,800

ONO plus VAT

Call

Condition: good (used), Good condition with accessories Biodowriauf

more

Listing

Wijchen

(dealership location)

7,560 km

LVD PPNMZ 80/30

Call

Condition: used, Press brake Model: Conventional Bh2vtev Manufacturer:&nbsp LVD Type:&nbsp PPNMZ 80/30 Capacity:&nbsp 80t Max.&nbsp working width: 3000mm Back-gauge electric adjustable Numerical control (NC) doesn't function Including tooling for the full width!

more

Listing

Jonschwil

8,031 km

Press Brake

PROMECAM RG 75-25

Call

Condition: good (used), Year of construction: 1969, Bending length 2550 mm, capacity 75 to, gap between column 2050 mm, stroke 200 mm, throat gap 300 mm, motor 7,5 KW, back gauge manual, dimension 2700x1400x1900 mm, weigth ca. 4000 kg E2mux2e

more

Listing

Eislingen/Fils

7,988 km

EHT EHPS 8-25

Call

Condition: used, Year of construction: 1992, pressure:80 t chamfer lenght:2550 mm distance between columns:2050 mm dayligth:max. 520 mm max. ram stroke:160 mm column arm:300 mm stroke speed - idle stroke downwards:100 mm/sek stroke speed - under load:11 mm/sek stroke speed -return:100 mm/sek Cbsle7j9uo total power requirement:14 kW weight of the machine ca.:6,6 t dimensions of the machine ca.:3,0 x 1,9 x 2,7 m

more

Listing

A - Niederösterreich

8,383 km

Machines

Darley Abkantpresse

€18,000

CNC Press brake bending press Amada 80t 2500mm ITS

Call

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Ep3tvryyq

more

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8,351 km

Pressbrake

LVD PPEB-EQ 80/2000

Call

Condition: good (used), Year of construction: 2008, Catalog No. : 7022 Type: PPEB-EQ 80/2000 Producer: LVD Made in: 2008 Characteristic: Control system: CADMAN CNC Pressing force: 80 t Maximum bending lenght: 2000 mm Stroke: 200 mm Distance between frames: 1500 mm Maximum stroke speed: 130 mm/s Maximum bending speed: 11 mm/s Maximum return speed: 115 mm/s Power demand: 12.5 kW Main motor output: 7.5 kW Bfl2xghi7as

more

Listing

Concordia Sagittaria

8,373 km

Hydraulic Bending Press

Gasparini POA 80

Call

Condition: used, GASPARINI Hydraulic Bending Press MOD. POA 80 Bending length mm 3100 I9tz2s7vj Power exerted Ton 80 No. 4 rear props for sheet metal positioning Bottom dead center adjustment Promecam-type tool attachments Frontal multibeam barriers

more

Listing

Wijchen

(dealership location)

7,560 km

AMADA PROMECAM ITS-080-25, 80t 2500mm

Call

Condition: used, Year of construction: 1990, Press brake bending press Model: CNC Manufacturer:&nbsp Amada Type:&nbsp ITS-080-25 Controller:&nbsp MBC CNC D9uvbegp0 Capacity: 80t Max. working width: 2500mm Max. stroke: 105mm Motor-power: 9,5kW Incl. documentation

more

Listing

Hawksworth Trading Estate

7,123 km

press brake

LVD PPEB 80/30 EASY FORM

Call

Condition: like new (used), Year of construction: 2010, Year of construction 2010 Technical specifications Force 800kN Working length 3000mm Distance between uprights 2550mm Stroke 200mm Distance table – ram 400mm Gap 400mm Approach speed 130mm/s Working speed 11mm/s Return speed 115mm/s Fuvgkogi2 weight 7000 kg Power 20 KW COMMAND CONTROL TOUCH-B • Table PP8170 V-axe • top tool clamping PP3090 – Wila • hydraulic top tool clamping PP3100 • hydraulic clamping die PP3160 • Back gauge X600 X’ R Z1 Z2 PP8096 • Security; CE PP3580 – lasersafe BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

more

Listing

Soerendonk

7,580 km

Donewell 80-2500

€4,450

electric servobrake the new revolution

Call

Condition: good (used), Year of construction: 1980, Donewell press brake Type: 80-2500 Control: Cybelec CP 9220 Pressing force: 80 T Bhg33f0cufh Working width: 2540 mm Year of construction: 1980 Dimensions: 255x130x265 cm LxWxH Weight: approx 6300 KG

more

Listing

KK-Industries CNC elektrische Abkantpresse KKI Revolution DDM-80

A - Niederösterreich

8,383 km

KK-Industries CNC elektrische Abkantpresse KKI Revolution DDM-80

€70,206

Call

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages 100% electric, 0% hydraulic oil Up to 50% less energy consumption compared to conventional hydraulic press brakes High efficiency and accuracy High bending speed and much quieter Total length usable between the frame Lower maintenance costs environmentally friendly User friendly control panel Automatic calculation of bending steps directly from STEP or DXF files Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility. 100% electric, 0% hydraulic oil Up to 50% less energy consumption compared to conventional hydraulic press brakes High efficiency and accuracy High bending speed and much quieter Total length usable between the frame Lower maintenance costs environmentally friendly User friendly control panel Automatic calculation of bending steps directly from STEP or DXF files Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Itz0tamms

more

Listing

Altbach

7,967 km

Hydraulic Press brake CNC

AMADA PROMECAM ITS 80-25

Call

Condition: used, Year of construction: 1991, pressure 80 t chamfer lenght 2500 mm distance between columns 2050 mm Stroke beam 100 mm 370 mm 350 mm Quick speed,inspeed 100 mm/sec bendingspeed 10 mm/sec opening speed 100 mm/sec X-axes 600 mm R1 and R2 axis controlled by cnc 150 mm Dmf0wp Z1+Z2 axes controlled by cnc manuell mm Number of working hours h Dimensions of machine: length 2700 mm width 1650 mm height 2200 mm weight 4800 kg Control total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

more

Listing

Mouscron

7,476 km

LVD PPEB-8 80/25

Call

Condition: excellent (used), Year of construction: 2009, Hydraulic press brake LVD PPEB-8 80/25 Touch-B Year of construction 2009 Technical specifications Force 800kN Working length 2500mm Distance between uprights 2050mm Stroke 200mm Distance table – ram 400mm Gap 400mm Approach speed 130mm/s 9vamwivymn Working speed 11mm/s Return speed 115mm/s weight 6500 kg motor 7.5kW COMMAND CONTROL TOUCH-B • Table PP8170 V-axe • top tool clamping PP3090 – Wila • hydraulic top tool clamping PP3100 • hydraulic clamping die PP3160 • Back gauge X600 X’ R Z1 Z2 PP8096 • Security; CE PP3580 – lasersafe

more

Listing

Pullach im Isartal

8,138 km

2004 Amada HFP 80-25 L

AMADA PROMECAM HFP 80-25 L

€24,950

Call

Condition: excellent (used), Year of construction: 2004, Operating hours: 22,000 h, Bending machine 2500 mm- to 6 mm steel plate Amada for sale in early 2024. The machine is very well maintained + serviced by Amada. Has many tools and in use until approx. March 2024. A viewing is possible to arrange. Operating hours :21862 h Operating counter as of 25.10.23 Maintenance contract :since 2005 yearly by Amada Dlxwz2 Special maintenance services: 2023 Replacement of both cylinders C67780 HF-8025 stroke350 mm by Amada 2023 Exchange valves 2x H19029 / 1x H15284 / 2x H15283

more

Listing

Eislingen/Fils

7,988 km

AMADA PROMECAM FBD-8025F

Call

Condition: used, Year of construction: 1990, machine/vehicle number: 8500380, pressure:80 t chamfer lenght:2505 mm distance between columns:2200 mm Y7l37fdvf total power requirement:7,3 kvA weight of the machine ca.:5,6 t dimensions of the machine ca.:3 x 2,25 x 2,20 m

more

Listing

Soerendonk

7,580 km

Darley EHR 80 31/25

€4,450

electric servobrake the new revolution

Call

pressing force: 80 t, Condition: good (used), Year of construction: 1984, Darley press brake Type: EHR 80 31/25 Control: Dalem DA22 DN1010 Press force: 80 T Dmq0r2 Working length: 3100 mm Stroke: 150 mm Power: 11 KW Year of construction: 1984 Documentation included Dimensions: 350x135x248 cm LxWxH Weight: approx 8150 KG

more

Listing

KK-Industries CNC elektrische Abkantpresse KKI Revolution DDM-6

A - Niederösterreich

8,383 km

KK-Industries CNC elektrische Abkantpresse KKI Revolution DDM-6

€70,206

Call

Condition: new, pressure: 65bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 5500motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages 100% electric, 0% hydraulic oil Up to 50% less energy consumption compared to conventional hydraulic press brakes High efficiency and accuracy High bending speed and much quieter Total length usable between the frame Lower maintenance costs environmentally friendly User friendly control panel Automatic calculation of bending steps directly from STEP or DXF files Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility. 100% electric, 0% hydraulic oil Up to 50% less energy consumption compared to conventional hydraulic press brakes High efficiency and accuracy High bending speed and much quieter Total length usable between the frame Lower maintenance costs environmentally friendly User friendly control panel Automatic calculation of bending steps directly from STEP or DXF files Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Bd37qsbkat

more

Listing

Hawksworth Trading Estate

7,123 km

HYDRAULIC PRESS BRAKE

AMADA PROMECAM FBD 8025

Call

Condition: excellent (used), Year of construction: 1986, year 1986 price POA stock no. 016707 specification 80 TONS CAPACITY X 2500 HYDRAULIC UP STROKING MULTI AXIS CNC PRESS BRAKE description TYPE HYDRAULIC UPSTROKING BENDING LENGTH 2500 BENDING PRESSURE 80 TONS Betstwbb CONTROL NC9 EX ll NO OF AXIS 2 + PNEUMATIC R AXIS AXIS CONFIGURATION X1-Y21+ R OPEN HEIGHT 370 STROKE 100 WEIGHT 6500KG SERIAL NO. 58500098

more

Listing

Ahaus

7,617 km

ERMAK ECO BEND EXPERT 26.80

Call

Condition: new, pressure 80 t chamfer lenght 2600 mm distance between columns 2200 mm column arm 250 mm ram stroke speed 90 mm/sec return speed 7,5 mm/sec work speed 60 mm/min work stroke 160 mm dayligth 380 mm oil volume 150 ltr. Vluuhru7 table height 900 mm voltage 400 Volt weight 5.227 kg range L-W-H 3750x1950x2400 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes

more

Listing

Niederlangen

7,585 km

COMBI press brake + shear

ERMAK POWER BEND FALCON 1270x60S

Call

Condition: new, pressure 60 t chamfer lenght 1270 mm distance between columns 1000 mm dayligth 530 mm throat 410 mm stroke 275 mm working feed 10,0 mm/sec return speed 165,0 mm/sec work height max. 900 mm quantity of oil 150 l Control DELEM DA 58 T total power requirement 7,5 kW weight of the machine ca. 4320 kg dimensions 2,25 x 1,96 x 2,75 m Ikowhr300 ----- ----- CNC press brake with special equipment * Version "ERGO" - knee room for the operator * flexible articulated arm mount for the controller * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- ----- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen * 2D graphical programming * 15" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes : Y1 - Y2 - X - R - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - Front, foldable sheet metal support - Double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

more

Listing

Jonschwil

8,031 km

COMBI TG-3040-6/75

Call

Condition: new, Year of construction: 2022, 2 in 1 = Press Brake + Shear bending length 3040 mm, Press power 75 to, Shear capacity L = 3200 mm x 6 mm, throat 200 mm, working high 640 / 1240 mm, Control CYBELE CybTouch 15, mot. gauge 700 mm, shadow cutting line, motor 10 KW dimensions 3700x1900x2400 mm, ca. 9000 kgs Ptwqoa same machine available L = 2000 mm und L = 1400 mm

more

Listing

Via Artigianato, 2, 25011 Calcinato BS, Italia

8,242 km

COD. 99U0612 - PRESSBRAKE

LVD PPEB 80/20

Call

Condition: excellent (used), Year of construction: 2007, Year 2007 Serial 31652 3bh8m9hs 6 Axes Angle control Wila hydraulic upper linkage Lower linkage LVD hydraulic

more

Listing

A - Niederösterreich

8,383 km

Conventional press brakes

Darley Abkantpresse

€18,000

Call

Condition: used, bending length: 3100pressure: 80messurements (LxWxH): 3300x1300x2600motor power: 5,5oil filling: 100weight approx.: 9000 Ce8y8li3 Abkantpresse Darley 3100 mm x 80 to

more

Listing

Bydgoszcz

8,145 km

Press Brake Estun E21

Otinus PBO-3280-N Estun E21

€33,381

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3280-N Estun E21 WC67Y 80/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller Chub077tpz (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Ahaus

7,617 km

Electrical Press Brake G25 (80x2500)

AMADA PROMECAM HFE 80-25

Call

Condition: used, Year of construction: 2001, pressure 80,0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60,0 mm ajustment speed 100 mm/sec working feed 10,0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm oil volume 90,0 l total power requirement 9,0 KW weight of the machine ca. 5880 kg. range L-W-H 3630 x 2450 x 2550 mm maintained condition (!!) Machine with many application tools Furnishing: - AMADA CNC control, model OPERATEUR II - CNC control OPERATEUR 2 in 8 axes (X1+X2,Y1+Y2,R1+R2,Z1+Z2) - CNC-controlled rear gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop fingers (R1+R2) - CNC-controlled adjustment of the stop fingers left-right (Z1+Z2) - pivoting control, front left - free foot switch - Upper tool holder with upper wedge crowning (AMADA system) - rear protective device (protective grille) - lateral protective device (protective doors) - front protective device (SICK light barrier) - CE marking - original instruction manual * many application tools (stamps + matrices) + 1x tool sorting store * further technical data: adjustment range X axis .. 700 mm X axis with workpiece placed .. 1020 mm R axis .. 250 mm adjustment speed X axis .. 500 mm/sec R axis .. 160 mm/sec Z1+Z2 axis .. 1000 mm/sec Positioning accuracy ± mm X axis.. 0.1 R axis .. 0.1 Z axis .. 1.0 * Machinelink : ?machineno=1008-9308329 * Machinevideo : Dkf02r ?v=bfwhHyHtifc

more

Listing

Burkardroth

7,903 km

CoastOne Oy G25 (80x2500)

Call

Condition: new, Year of construction: 2022, machine/vehicle number: Cone G25, Electromechanical CNC press Manufacturer: CoastOne Oy Type: Cone G25 Pressing force: 800 kN Bending spindles: 4 Controlled axes: X-R axis (2x manual stop fingers) Standard Type A / R1 / AMADA / Promecam press brake tool holder Control: TC15-2D graphic touch screen Options: - 4 or 5 axis backgauge system - Lazersafe light barrier system standard - Lazersafe IRIS light barrier system - Lazersafe IRIS+ light barrier system angle measuring system - extra screen with 3D bending software - support table - Light front and rear - WILA / Trumpf / Type B - tool holder system - 2x bending aids Cbgdob2lcc 36 months warranty after installation

more

Listing

Rödermark

(dealership location)

7,853 km

Hydraulic. Bending press

EHT EHPS 8-12

Call

Condition: used, Year of construction: 1992, machine/vehicle number: 207320; Lg-Nr. 09361, Technical data: R80chmvyi - max. working length 1250 mm - bar passage 1050 mm - max pressing force 80 t - stroke 250 mm - bar overhang 300 mm - max. installation height between table and press beam 560 mm - lifting speeds - down speed idle max 100 mm/sec. - Up speed 100 mm/sec - Pressing speed max. 12 mm/sec. - Total drive power 15 kW - space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - with: - CNC - control CYBELEC DNC 7400 PSGY - controlled X - axis back gauge 5 - 1000 mm - Z - axis pneum. height adjustable in three steps - manually movable and foldable stop fingers - controlled pneumatic die displacement - hydr. tool clamping - manual crowning - 2 pieces support arms - sharpening tool divided H 320 x L 1000 mm - deer foot tool H 320 mm x L 1000 mm - universal die L 1000 mm

more

Listing

Goldenstedt

7,653 km

bending press

LOTZE PZ 100

Call

Condition: used, Year of construction: 1982, pressure 100 t distance between columns 2540 mm chamfer lenght 3500 mm table height over floor 760 mm stroke 150 mm control DNC 73 PC total power requirement 11 kW weight of the machine ca. 8 t dimensions of the machine ca. 4,1x1,7x2,9 m Xm3qxgcff

more

Listing

Niederlangen

7,585 km

ERMAK POWER BEND FALCON 3.175

Call

Condition: new, pressure 175 t chamfer lenght 3100 mm Nl7zyj3y3 distance between columns 2600 mm dayligth 550 mm throat 410 mm stroke 275 mm working feed 10 mm/sec return speed 135 mm/sec work height max. 900 mm quantity of oil 200 l total power requirement 15 kW weight of the machine ca. 9450 kg - DELEM CNC control model DA-58T graphics / touchscreen * 2D graphic programming * 15 "high definition color TFT screen * Bending sequence calculation * Product programming and display in real size * USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.85-R08, system "A" with quick-change clamp - Additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm holder - BOSCH / HOERBIGER hydr. Components - SIEMENS electrical system - LEUZE light barrier behind the machine - FIESSLER AKAS laser with FPSC protective device v.d. machine Protective device against d. machine - Swiveling control panel, mounted on the left - 2x front support arms "sliding system", with T-slot and tilting cam - 1x double foot control - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes

more

Listing

Bydgoszcz

8,145 km

Press Brake CNC OT-41

Otinus PBO-3280-CNC OT-41

€37,572

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3280-CNC OT-41 WC67Y 80/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4800.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. Rbqqf OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Ahaus

7,617 km

Press brake CNC hydraulic

BOSCHERT PB 2575

Call

Condition: used, Year of construction: 2008, pressure 75,0 t Cpobyo879 chamfer lenght 2620 mm distance between columns 2055 mm column arm 400 mm ajustment speed 100 mm/sec working feed 10,0 mm/sec return speed 90,0 mm/sec stroke ~ 140 mm dayligth ~ 360 mm table height 930 mm table width 85,0 mm Control ELGO P8822 oil volume 150 ltr. engine output 7,5 kW weight of the machine ca. ~ 6.500 kg. range L-W-H 3700 x 1800 x 2700 mm Furnishing: - electro-hydraulic conventional NC press brake - Swivel control front right, with ELGO P8822 control unit * digital position indicator * Entry of target/actual values possible - Electro-motor backgauge - X axis * Travel = 700mm - electrical adjustment of the immersion depth - Y axes - with 2x manually adjustable stop fingers (R+Z axis) - Upper tool holder with upper wedge crowning - AMADA system - Lower tool holder - System AMADA - very many diverse / divided upper tools - rear guard (door) - lateral protective device (door) - 1x dual free-moving footswitch - User manual (PDF) * Machinelink : ?machineno=1008-9308327

more

Listing

Hezinger-PressLine Industrie-Abkantpresse PRL070/20

Kornwestheim

7,946 km

Hezinger-PressLine Industrie-Abkantpresse PRL070/20

Call

Condition: new, Hydraulic press brake Hezinger PressLine model PRL07020 3D control DELEM DA69T and offline 3D CAD/CAM synchronized with Y1-Y2 axis and angle of inclination up to 50 mm 2-axis CNC back gauge X = 750 mm and R = 200 mm Extended back gauge with Z1 Z2 and SPA pneumatic pads and additional X-X 5-axis for inclined loading with WILA hydraulic tool clamping and WILA CNC crowning including DELEM controls DA66T on Mobile Panel Pressing force of 700 kN Bending length 2100 mm Passage between the page stands 1.600 mm Hmobg2b Capacity utilization in the page stands 300 mm Height 500 mm 300 mm stroke of the press bar Backward speed 10-200 mm / sec Working speed 0.5-10.0 mm / sec Forward speed 10-145 mm / sec Motor Anshlussleistung 7,5 kW Filling quantity hydraulics oil 120 l Machine width 3,080 mm Machine depth 2,030 mm Machine height 2.730 mm Machines weight 6,025 kg Facilities basic price: Y1 and Y2 with inclination up to 50 mm by ball-bearing hydraulic cylinder - SwayBend system Y1 Y2 positioning accuracy 0.01 mm Three-point lead of the pressure bar Pressure bar tip is centered automatically Inboard hydraulic cylinder of traverse for the better Pressure distribution on the Kant line X and R-driven Backgauge type BGA X-axis for the depth, positioning range 700 mm Velocity range with 3 anchor points 0-950 mm Positioning accuracy x + / -.

more

Listing

Gotha

7,900 km

Hydr. Press brake

DURMAZLAR CNC-HAP 2580

Call

Condition: good (used), Year of construction: 1999, machine/vehicle number: 751199041, Offer 91102 THE MACHINE CAN BE VISITED AT THE LOCATION D- 99868 GOTHA AFTER APPOINTMENT ARRANGEMENT. Technical data: - Printing capacity 80 t - working width 2520 mm - passage between the columns 2150 mm - table width 220 mm - throat 240 mm - installation height approx. 400 mm Djmrcd - ram stroke 160 mm - working height approx. 900 mm - engine power approx. 11 kW - oil filling approx. 120 l - space requirement approx. W 2750 x H 2400 x D 1900 mm - weight approx. 6000 kg - with: - swivel arm - control panel with CNC control CYBELEC - Mot. backgauge with height adjustment V - die + split upper die incomplete - two-hand control panel, foot switch,

more

Listing

Goldenstedt

(dealership location)

7,654 km

MENGELE D80-2

Call

Condition: used, Year of construction: 1981, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Control keine stroke 250 mm light barrier SICK Gxs3jxt The machine was previously equipped with a CNC control, now converted to electrically manual operation. Digital display for backgauge. electrical stroke adjustment Machine is functional and has been used sporadically for the past 15 years, as previous owner preferred to use a folding machine. tools included: 1 set of upper tool 1 lower tool (die block)

more

Listing

68 Glover St, Birmingham B9 4EL, UK

7,072 km

Cnc pressbrake

Bystronic Xcite 80e

Call

Condition: good (used), Year of construction: 2014, Used quality modern 2014 BYSTRONIC Xcite 80e electric belt driven cnc Press Brake for sale High specification and highly accurate Cnc downstroke pressbrake for sale Bed length 2metre / 2050mm Year / new: 2014 Bcfnjkzzjwv Model: Xcte 80 e Capacity / tonnage: 80ton Complete Bystronic Byvision touch screen control 5axis back gauge Max stroke 150mm Fully serviced with Bystronic uk

more

Listing

Bydgoszcz

8,145 km

Press Brake CNC Delem

Otinus PBO-3280-CNC Delem DA-58T

€53,286

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-3280-CNC Delem DA-58T WC67Y 80/3200 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 3200 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2700 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 3300 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Pxnpl3 Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Altbach

(dealership location)

7,966 km

Trumpf V85

Call

Condition: used, Year of construction: 2002, Operating hours: 41,000 h, pressure 85 t chamfer lenght 2050 mm distance between columns 1780 mm Stroke beam 365 mm 600 mm 7e3zbwj9n0 350 mm Quick speed,inspeed 150 mm/sec bendingspeed 0-10 mm/sec opening speed 150 mm/sec 600 mm R1 and R2 axis controlled by cnc 200 mm Z1+Z2 axes controlled by cnc 300-1700 mm Number of working hours 41000 h Dimensions of machine: length 2600 mm width 2000 mm height 2900 mm weight 9300 kg Control Delem DA 69 total power requirement 14 kW dimensions of the machine ca. 3x2x3 m

more

Listing

Niederlangen

7,585 km

Hydraulic Press Brake Estun E21

ERMAK POWER BEND FALCON 3.135

Call

Condition: new, pressure 135 t chamfer lenght 3100 mm distance between columns 2600 mm dayligth 550 mm throat 410 mm stroke 275 mm working feed 10,0 mm/sec return speed 120,0 mm/sec work height max. 900 mm quantity of oil 200 l Control DELEM DA 58 T total power requirement 11 kW weight of the machine ca. 8650 kg dimensions 4250 x 2050 x 2800 mm ----- ----- Press brake with special equipment * increased installation height * increased cylinder stroke * as well as increased bending beam speeds ----- ----- Furnishing: - DELEM CNC control model DA-66T graphic/touch screen * 2D graphical programming * 17" TFT color screen with high resolution * Bending sequence calculation * Product programming and real size display * USB interface * intuitive, graphical entry of profiles * Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation * Radius programming * Graphic tool and product library * Collision monitoring * 3D visualization * 1GB memory - Motorized backgauge with R-axis, on ball screws - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Deer foot upper tool with PS 135.85-R08, system "A" with quick-change clamp - additional crowning device in the tool holder of the upper tool - 4V universal die block M 460 R with die shoe 60 mm mount - BOSCH/HOERBIGER hydr. components - SIEMENS electrical system - LEUZE light barrier behind the machine Ql22f - FIESSLER AKAS laser with FPSC protection device v.d. machine - Swiveling control panel, mounted on the left - 2x front support arms "Sliding-System", with T-slot and cam - 1x double foot control - CE mark / declaration of conformity - Operating manual: Machine and control in German - Safety manual : press brakes

more

Listing

Staufenberg

7,810 km

Hydr. Press brake

EHT APN 80/3550

Call

Condition: used, Year of construction: 1970, Hydr. press brake make EHT type APN 80 machine # 20377, year of construction 1970 P8c7w7z2c technical data: max. press pressure 80 t table length 3550 mm tool length 3550 mm distance between the columns 3050 mm column projection 250 mm ram stroke hydraulic 100 mm slide stroke mechanical 80 mm Drive power of the high-pressure pump 11 kW Drive power of gear motor 0,75 kW Pressure in the retraction system 120 - 150 atü Nitrogen preload in pressure accumulator 80 atü Capacity of pressure accumulator 10 l Oil tank capacity 280 l Oil quality Hydraulic oil 3°E at 50° C Operating voltage three-phase current 380 volts, 50 Hz Control voltage 220 volt Driving power 12 kW Weight approx. 9550 kg outer dimensions 3565 x 1680 x 2700 mm used

more

Listing

Bydgoszcz

8,145 km

Otinus PBO-2580-N Estun E21

€30,310

Call

Condition: new, Year of construction: 2023, Hydraulic press brake PBO-2580-N Estun E21 WC67Y 80/2500 Specifications - Max working thickness (S235): up to 4.0 mm - Nominal pressure: 800 kN - Max working length 2500 mm - Throat depth: 250 mm - Max stroke: 120 mm - Daylight: 385 mm - Distance between side frames: 2000 mm - Max backgauge distance: 500 mm - Nominal motor power: 5.5 kW - Length: 2600 mm - Width: 1450 mm - Height: 2300 mm - Weight: 4500.0 kg Tools Cbsgana8dg - Front supports: 2 pcs - Backgauge distance regulation (X-axis): electric motor - Ram control (Y-axis): electric motor - Type of punch holder: AMADA quick-action clamping E21 controller (Mounted on a swivel arm) - Controls X (backgauge) and Y (ram) axes - Allows the creation of up to 40 programmes - Each programme may consist of 25 steps - Intuitive operation through the use of English abbreviations, which are explained during training It is a sophisticated but easy-to-use controller that allows operation in three modes: - Manual - Single automatic - Serial automatic Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

more

Listing

Bydgoszcz

8,145 km

Press Brake CNC Delem

Otinus PBO-2580-CNC Delem DA-58T

€50,215