English
German English Dutch Dutch

Welding & cutting for sale

2,598 Results for
Your detected location: United States (Edit)
Cancel
Schaaf DSS 400 Schaaf DSS 400 Schaaf DSS 400 Schaaf DSS 400 Schaaf DSS 400
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Inert gas welding machine -Max. Welding power: 400 A. -Four roll feed -Water-cooled -Hose package -with removable wire feeder -Incl. Ground cable -Gas valve Qky8lmdzb
DALEX A112 DALEX A112 DALEX A112 DALEX A112 DALEX A112 DALEX A112 DALEX A112
more images
7
Call
Ahaus, Germany Germany
(dealership location)
7617 km
used
current capacity ca. 12 kVA throat 345 mm Bi28iysbhu contact pressure capacity max. 1.800 N connected load frequency 380 Volt Furnishing: - mobile spot welding machine - with a mobile underframe
MESSER LINCOLN Invertec V300-1 MESSER LINCOLN Invertec V300-1
more images
2
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
output 12,8 kVA F Kl. F Bndxzwpm IP 23 dimensions of the machine ca. 560 x 250 x 480 mm
N/A N/a N/A N/a
more images
2
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10189 Brand: N/A B0yrg92bnh Storage location: Halberstadt
Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31 Dalex  P 31
more images
15
The following item is for sale: - Our offer number: 8/106 - Spot welding machine with horizontal pneumatic from Festo (press-in device ) - Manufacturer: Dalex - Type: P 31 for Rocketfix - Serial number: 2651462 /11 - Nominal power 20 KVA - Connected load 33 KVA - 380 V with 63 A plug 50HZ - Cooling type water cooled - with Festo type DNC-80-50-PPV-A press-in device - Dimensions (LxWxH): 1200 mm x 1300 mm x 1200 mm Nv22n - weight approx.: 600 kg - optical condition according to photos - used - fu...
Call
Oldenburg Germany
7619 km
2008
good (used)
We offer here: Microstep MG PB 7501.25 Extraction table with sectional zone control Table size: 7500 x 2500mm Plasma source: HiFocus 160i with automatic gas console Drill support with 5.5 kw TEKA filter system AsperWin Software Basic Vtu3m9ez The system can be viewed under power System availability around the end of April 2022 Subject to prior sale no warranty
UNION CARBIDE Lanzetta C-120 UNION CARBIDE Lanzetta C-120 UNION CARBIDE Lanzetta C-120 UNION CARBIDE Lanzetta C-120 UNION CARBIDE Lanzetta C-120
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Plasma cutter, plasma cutter -Max. Cutting current: 120 A -Mains voltage: 3x400 V Qk92zfx3i -up to a material thickness: of 30 mm -Incl. Gas mixing console -Industrial execution -Weight: 600 kg
Sato SATRONIK DHD S 3.500 Sato SATRONIK DHD S 3.500 Sato SATRONIK DHD S 3.500 Sato SATRONIK DHD S 3.500
more images
4
Call
Bochum Germany
7669 km
2019
good condition (used)
CNC-controlled portal cutting machine SATRONIK DHD S 3.500 with boom working width 2.000 mm working length 6.000 mm B03b9oxyxt Material thicknesses Plasma piercing up to 50 mm / bevel cut 45° up to approx. 40 mm Autogenous max. 150 mm Processes Plasma chamfering & oxyfuel vertical, drilling Plasma system HiFocus 360i neo, automatic gas console Cutting table Extraction table system with oscillating conveyor system Filter system DFPRO 12 - ZUM 501 with dust discharge via drums Software SATRONIK E...
ESAB LTG 400
more images
1
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
current intensivity 400 A open-circuit voltage 65-75 V Hdqlky2 IP protection class IP21 Permissible load at 35% duty cycle 400 A at 60% duty cycle 315 A at 100% duty cycle 250 A Idle power 0.49 kW Application class: S - Water cooled - With hand and foot remote control - Incl. Hose package approx. 6000 mm
N/A N/a
more images
1
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10190 Yuftjk Brand: N/A Storage location: Halberstadt
- Our offer number: 18/104 - Mig/Mag welding machine - Manufacturer: Carl Cloos - Type: GLC 356-B - Make No 885 - Supply voltage 380 V/19 KVA - Output current 350A - Year of manufacture 1998 - Cooling mode : F - with separate wire feeder - Type: Ck68B - Serial number: 2381 - with burner Hose length 4 m - approx. 4 m ground cable - Dimensions (LxWxH): 1000 mm x 460 mm x 1150 mm - Weight approx.: 150 kg - optical condition according to photos - used - functional -Dispatch throughout Germany 99€ Yo...
Migatronic Omega² 300 Migatronic Omega² 300 Migatronic Omega² 300 Migatronic Omega² 300
more images
4
Call
Valkenswaard Netherlands
7571 km
refurbished (used)
More available. Migatronic Omega² 300 300 Ampere 380 Volt Puls on welding wire Synergic 4 Roll drive 2/4 Stroke Spot welding Bw9xdelq Soft start Hot start Ajustable burnback Digital display Stepless ajustable Fixed programs Pre gas Post gas Down slope End current Elektrode option Including a new 3 meter ML250 welding torch and a 3 metre earth cable. Wit this machine you can weld Steel and Stainless Steel Also available in Aluminium option. We can offer you different types of machines like: ...
Heberle cd System 2010 Heberle cd System 2010 Heberle cd System 2010 Heberle cd System 2010 Heberle cd System 2010
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Stud welding device with coordinate welding table, table stud welding system, coordinate stud welding system 3jsk779t -Working range of bolts: M3-M 8 -Welding sequence 8-15 studs/min -Indextic: 5000 x 500 -Index: 13
imes-icore iCUTwater ECO II imes-icore iCUTwater ECO II imes-icore iCUTwater ECO II imes-icore iCUTwater ECO II
more images
4
Call
Bochum Germany
7669 km
2016
good condition (used)
Type: iCUTwater ECO II Machine year: 2016, Made in Germany Operating hours: 94h (Was only used for teaching and demonstrations) Ejz29jbbc Compact Abrassive - Waterjet Cutting Machine for Machining of metallic, mineral and organic flat materials working area 1000 x 600 mm max. Z- passage 60 mm machine dimensions 2150 x 1615 x 1964 mm Y axis in gantry design Completely enclosed All operating elements are IP67 passive Three-chamber sedimentation tank made of stainless st...
DALEX GW 343 DALEX GW 343
more images
2
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
current intensivity 24 / 27 A output 16 / 18 kVA voltage 380 V 0,54 connected load 4 x 6 mm²/CU 35 A Bensbrchlp weight of the machine ca. 235 kg dimensions of the machine ca. 850 x 610 x 1050 m
N/A N/a
more images
1
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10192 Brand: N/A B0yrjvvubq Storage location: Halberstadt
Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas Microstep MG 6001.25 BPrk | Rotator | Bohren | Gas
more images
8
We offer a Microstep MG 6001.25 BPrkG SF 300 with the following features: • Machine type MG - latest generation • Table size 6000 x 2500mm with sectional extraction • Plasma source: SmartFocus 300 with automatic gas console • Rotator endlessly rotating with automatic calibration station • Power Hole Technology • Fully automatic oxy-fuel torch with anti-collision system • Drill support with 26kw, for bores up to 40mm and threads up to M33 • External and internal cooling for drilling support thro...
ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004 ABB + AWL IRB6600 IRC5 M2004
more images
15
Call
Wijchen, Netherlands Netherlands
(dealership location)
7560 km
2006
used
Welding robot, complete assembled with weldingtransformator and -manipulator. Robot Manufacturer:&nbsp:ABB Model robot:&nbsp:IRB6600 Type robot: IRB 6600-175/2.8 Type B Bxubh9vegh Type controller:&nbsp:IRC5 M2004 Number of axes: 6 Payload:&nbsp:175kg Reach: 2800mm As 1: 360gr As 2: 150gr As 3: 250gr As 4: 600gr As 5: 240gr As 6: 600gr Welding equipment Manufacturer: AWL Type: HSR 1 FT Power: 70kVa Welding-torch: Kolben Seeger Welding-transformator: Expert J-7.1-5.4-400-TM/M6 Welding-manupila...
NIMAK Dalex 180 A NIMAK Dalex 180 A NIMAK Dalex 180 A NIMAK Dalex 180 A NIMAK Dalex 180 A
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
TIG welding machine -Nimak electrode device -Dalex converter -Hose package -Ground cable Iwdpz87
UNIVERSAL HH-SC400 UNIVERSAL HH-SC400 UNIVERSAL HH-SC400
more images
3
Call
Korschenbroich, Germany Germany
(dealership location)
7648 km
1990
used
600 Grad max. Nnc22 Capacity 220 Volt weight of the machine ca. 0,2 t
DALEX TGKW 55 DALEX TGKW 55 DALEX TGKW 55 DALEX TGKW 55 DALEX TGKW 55
more images
5
Call
Goldenstedt, Germany Germany
(dealership location)
7654 km
used
current intensivity 30 x 200 A connected load frequency 3 x 400 V Bm2myy8q material thickness max. 5 mm Duty cycle at amperage 60 % / 200 A ED/A Duty cycle at amperage 100 % / 175 A ED/A weight of the machine ca. 290 kg dimensions of the machine ca. 1048 x 630 x 855 m AC / DC cooling of Transformer: by built-in fan Burner: water-cooled
ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a
more images
14
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10193 Brand: ESAB Storage location: Halberstadt Pwlvt Country of origin: Schweden serial number: 535-802-0534
ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000 ESAB Suprarex SXE - P 4000
more images
10
Call
Niederlangen, Germany Germany
(dealership location)
7581 km
2002
used
table width 1500 mm Vugcqm table length 4000 mm burner heads 2 cutting thickness max. 3 - 150 mm Control weight of the machine ca. 3,0 t dimensions of the machine ca. 2,2 x 4,8 x 2,0 m CNC plasma and oxy-fuel cutting machine - Control stick moving along, right - Steel band guide in cross direction - Track with double-sided rack - MultiJet BIF 220 burner - MX / 200-T plasma torch trolley - Oil spray device Incl. ESAB PRECISION PLASMA power source
ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500 ESAB Suprarex SXE-P 4500
more images
7
Call
Deutschland Germany
7870 km
1998
good (used)
CNC Portal Plasma Cutting Machine Manufacturer: ESAB Type: Suprarex SXE-P 4500 Year of manufacture: 1998 CNC control: Vision PC E2f278piw working width: 3.000 x 15.000 mm track width: 4.000 mm 4 oxyfuel torches 1 plasma torch with power source Hypertherm Max100D Piercing up to 15 mm Cutting up to 32 mm 1 three torch unit endless rotatable 1 ARC marker for marking Suction table Filter unit .
Mansfeld KG 400 Mansfeld KG 400 Mansfeld KG 400 Mansfeld KG 400
more images
4
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
1974
used
Welding rectifier, electrode welding device, electrode welding machine, electrode welding rectifier -Welding performance: max. 400 A -Welding cable with electrode clamp -Ground cable Qlahwuy7q -Weight: 340 kg
HEINRICHSGLÜCK H 18 a HEINRICHSGLÜCK H 18 a HEINRICHSGLÜCK H 18 a HEINRICHSGLÜCK H 18 a HEINRICHSGLÜCK H 18 a
more images
5
Call
Barsbüttel/Hamburg, Germany Germany
(dealership location)
7700 km
used
table length:1200 mm table width:1200 mm table load:1,8 t total power requirement:220/380 V Biidvfjbsh dimensions of the machine ca.:2300 x 1200 x 1300 mm
EUTRON GAP300 EUTRON GAP300 EUTRON GAP300
more images
3
Call
Korschenbroich, Germany Germany
(dealership location)
7648 km
1988
used
voltage 389 V weight of the machine ca. 0,4 t without cable Rtkbzbof
HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L HYUNDAI H4010L
more images
12
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
2008
used
Ref. -No.: 10196 Brand: HYUNDAI B0yrnidxr3 Storage location: Halberstadt Country of origin: Südkorea serial number: HB5-0156-440
CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS CARL CLOOS SCHWEIßTECHNIK GMBH GLC 403 PA-TS
more images
6
Call
Leipzig, Germany Germany
(dealership location)
7963 km
1994
used
welding current - continuous: 40...400 A Length: 900 mm 7dfymfqiw height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing!
Messer Omnimat L 5600 Messer Omnimat L 5600 Messer Omnimat L 5600
more images
3
Call
Deutschland Germany
7870 km
1999
good (used)
CNC Portal Plasma Cutting Machine + Autogenous Manufacturer: Messer Type: Omnimat L 5600 Year of manufacture: 1999 CNC control: Omnicom track width: 5.600 mm Bfkcsoktzn track length: 25 m working area: 4 x 22 m 1 plasma torch with power source Hypertherm HD3070 2 oxyfuel torches 1 powder marker without table without filter ....
KOECO 800 E KOECO 800 E KOECO 800 E KOECO 800 E KOECO 800 E
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Stud welding device, compact stud welding system -Welding area: 3-12 mm -maximum current: 800 A. -with drawn ignition -robust housing -for threaded bolts -Welding performance -800 A = 7% ED Qk2i2sci2 -175 A = 100% ED -Number: 2x devices available -Price: per piece
AMADA PROMECAM AMT 700 AMADA PROMECAM AMT 700 AMADA PROMECAM AMT 700 AMADA PROMECAM AMT 700 AMADA PROMECAM AMT 700
more images
5
Call
Altbach, Germany Germany
(dealership location)
7966 km
1995
used
length 1500 mm Cbtwfvif height 2550 mm Control Amada Thickness V2A 2 mm Steel sheet steel 2,3 mm sheet width - max. 700 mm total power requirement 15 kVA weight of the machine ca. 1,3 t dimensions of the machine ca. 2x1x3 m
Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530 Prima Power Platino 1530
more images
9
Call
Kaiserslautern, Germany Germany
(dealership location)
7824 km
2014
ready for operation (used)
General Data Bw77l00a89 Measurements width 10600 mm Measurements depth 3550 mm Measurements height 2500 mm Machine weight 10000 kg Control Unit Brand PRIMACH Model 30L Main Drive Laser power 3 kW Laser type CO2 Laser brand Prima Electro Movement X-Axis Movement 3050 mm Y-Axis Movement 1525 mm Z-Axis Movement 150 mm Max Material Thickness Steel 20 mm Stainless steel 10 mm Aluminium 8 mm Media Main electronic connection 400 V / 50 Hz Additional Equipment Pallet changer Exhaust system Chiller...
ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a
more images
9
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10194 Brand: ESAB Storage location: Halberstadt Country of origin: Schweden N7obzzw serial number: 742-824-0038
KJELLBERG ESAB DVR 2 KJELLBERG ESAB DVR 2
more images
2
Call
Leipzig, Germany Germany
(dealership location)
7963 km
1972
used
Length: mm S8u2s7csy height: mm total power requirement: kW weight of the machine approx.: ca 50 kg space requirements of the machine approx.: m Feeding device for a welding machine.
Microstep  CombiCut A 4501.15+S800 Microstep  CombiCut A 4501.15+S800 Microstep  CombiCut A 4501.15+S800 Microstep  CombiCut A 4501.15+S800
more images
4
Call
Deutschland Germany
7870 km
2006
good (used)
CNC portal flame cutting machine Manufacturer: Microstep Type: CombiCut A 4501.15+S800 Year of manufacture: 2006 CNC control working area: 1.500 x 4.500 mm shaft: 800 mm 1 autogenous torch with GCE FIT+ 2 torch carriages available Bnkgg7e9fn Filter system Donaldson DFPRO 6 Cyclopeel ..
NIMAK CM 400 S NIMAK CM 400 S NIMAK CM 400 S NIMAK CM 400 S NIMAK CM 400 S
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Inert gas welding device, inert gas device -Max. Welding power: 400 A. Lh97r -4 roller drive -Air cooled -Incl. Ground cable -with removable wire feeder -Hose package -Number: several welding machines available -Price: per piece
DALEX A-300 DALEX A-300
more images
2
Call
Korschenbroich, Germany Germany
(dealership location)
7648 km
1985
used
weight of the machine ca. 0,3 t Eqlu90e welding power station
Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030 Trumpf TruLaser 3030
more images
13
Call
Kaiserslautern, Germany Germany
(dealership location)
7824 km
2011
ready for operation (used)
General Data Measurements width 9300 mm Measurements depth 4700 mm Measurements height 2200 mm Machine weight 12000 kg Control Unit Brand Trumpf Bstunmhk Main Drive Laser power 3.2 Movement X-Axis Movement 3000 mm Max Material Thickness Steel 20 mm Stainless steel 12 mm Aluminium 10 mm This Trumpf TruLaser 3030 Laser Cutting Machine was manufactured in the year 2011 in Switzerland. It has been working for 34200 hours. This machine is equipped with a control unit of the same brand. It can wo...
ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a ESAB N/a
more images
12
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10195 Brand: ESAB Storage location: Halberstadt Country of origin: Schweden serial number: 620-703-3544 B0yrmlqgvz
PECO PP1000 PECO PP1000 PECO PP1000 PECO PP1000 PECO PP1000
more images
5
Call
Leipzig, Germany Germany
(dealership location)
7963 km
used
current capacity: 100 kVA throat: 250 mm arm distance: ca. 400 mm current capacity: bei 50%=63 kVA total power requirement: 100 kVA weight of the machine approx.: ca. 600 kg space requirements of the machine approx.: L:1,2xB:0,8xH:1,6 m Spot Welding Machine - capacity by 50% ED: 63kVA, secondary voltage 4,4-10,8 Volt - operational current by 10 % ED 26kA, secondary short circuit current 44kA S8vnfsoqt equipment: - control over plant type E 0423.2 -eltros II from LEW Henningsdorf - foot control ...
Zinser 2115
more images
1
Call
Baden-Württemberg, Deutschland Germany
7969 km
2004
good (used)
CNC portal flame cutting machine Manufacturer: Zinser Type: 2115 Year of manufacture: 2004 CNC control: CNC2010 1 oxyacetylene torch working area: 2.5 x 15 m Bjtza27axa can be shortened as required runway with beam 17 m without table .....
Guss Typ 1060/2280 Guss Typ 1060/2280 Guss Typ 1060/2280 Guss Typ 1060/2280
more images
4
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Clamping plate, welding table, welding table, straightening plate, perforated plate -Dimensions: 2280/1060/40 mm -Table height: 960 mm Bqugp7l -with supporting ribs -Cast plate -Weight: 1050 kg
Kemppi Tylarc 303 Kemppi Tylarc 303 Kemppi Tylarc 303
more images
3
Call
Bad Laasphe Germany
7761 km
good (used)
Electrodes welding machine Eqbl3sd Manufacturer: Kemppi (Finland) Performance: 5-300 amp semi-automatic electrodes welding machine Welding gun (length approx. 4,000 mm) Ground cable Connection cable 5 pin 32 amp
Plymovent MFC-1002 Plymovent MFC-1002 Plymovent MFC-1002 Plymovent MFC-1002 Plymovent MFC-1002
more images
5
Call
Drachten Netherlands
7501 km
2002
good (used)
Used Plymovent mobile extraction Jxkvgu Type MFC-1002
N/A N/a N/A N/a N/A N/a N/A N/a N/A N/a N/A N/a N/A N/a
more images
7
Call
Mülheim an der Ruhr, Germany Germany
(dealership location)
7648 km
used
Ref. -No.: 10198 Brand: N/A Storage location: Halberstadt Egkdwljkc
Rehm RD 280 Rehm RD 280 Rehm RD 280 Rehm RD 280
more images
4
Call
Altenstadt, Germany Germany
(dealership location)
8049 km
good (used)
SN 043425 8zxypx 280/260/210 A
Sato  Satronik D5765 Sato  Satronik D5765 Sato  Satronik D5765
more images
3
Call
Baden-Württemberg, Deutschland Germany
7969 km
2016
good (used)
CNC Portal flame cutting machine Manufacturer: Sato Btuir0ih82 Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter
Alu 1000/1000 Alu 1000/1000 Alu 1000/1000 Alu 1000/1000 Alu 1000/1000
more images
5
Call
Wiefelstede, Germany Germany
(dealership location)
7608 km
used
Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Support area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Width: 1000 mm Due77a -Depth: 1400 mm -Height: 1300 mm