Used Trumpf Laser Cutting Machine for sale (388)

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Ndedpsv Ic Sasfx Abxed

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 59,480 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 600 mm, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, No reserve price – guaranteed sale to the highest bidder! Predecessor model of the well-known TruLaser Cell series Nodpfx Absxv Slhexjdd TECHNICAL DETAILS Category: 5-axis 3D laser cutting system Condition: Fully serviced (twice annually by Trumpf UK) Last service: January 2019 New vacuum pump installed: 28/05/2019 Working Area X-axis: 3,000 mm Y-axis: 1,500 mm Z-axis: 600 mm B-axis (rotational axis): +100° C-axis (rotational axis): n x 360° Laser Source Model: TRUMPF TLF 3200 Turbo Laser power: 3.2 kW Pilot laser: Present (for programming support) Control & Software CNC control: Siemens 840D with 3.5" floppy disk drive Network connectivity: Available (including analog modem for remote maintenance) Software: ToPs 100 with nesting module & IGES translator + ToPs 800 with fixture design & 3D IGES translator MACHINE DETAILS Beam on: 14,922 h Laser on: 59,480 h Dimensions: 3.0 x 1.5 x 0.6 m EQUIPMENT - Logbook function for laser power monitoring - Power supply cabinets - Closed-loop water cooling with air circuit - 5” high-pressure cutting optics - Setup device - Class 1 laser safety housing with manual sliding door - Extraction unit with particle filter (2,000 m³/h) - Stationary worktable

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, laser source model: TruFlow 4000, table length: 3,000 mm, table width: 1,500 mm, workpiece weight (max.): 900 kg, TRUMPF laser cutting machine with LiftMaster! TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Accuracy Smallest programmable increment: 0.001 mm Position deviation Pa: ±0.1 mm Mean position scatter Ps: ±0.03 mm Workpiece Maximum workpiece weight: 900 kg Maximum speeds Parallel to axis: 100 m/min Simultaneous, approx.: 140 m/min MACHINE DETAILS Laser: TruFlow 4000 Controller: Siemens Machine weight: 13,000 kg EQUIPMENT LiftMaster Ndodpfxsxwn S Hj Abxjd

Year of construction: 2013, operating hours: 23,265 h, condition: ready for operation (used), Main Drive Laser power 5 kW Workpiece Workpiece X 3000 mm Nsdsxy Tgzspfx Abxsdd Workpiece Y 1500 mm This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Application Types Cutting

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Capacities & Axes Working Range (X x Y): ≈ 3,080 x 1,650 mm. Max. Sheet Thickness: Up to approx. 8 mm (Mild Steel). Traversing Speeds: X up to 100 m/min; Y up to 60 m/min. Combined Speed: Approx. 100–116 m/min. Nodjxyk D Djpfx Abxsdd Accuracy: Positioning accuracy of ±0.10 mm.

Condition: used, functionality: fully functional, Year of construction: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance using fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and sheet metal edge detection Control - Advanced workshop programming (TruTops via network access) - Fast repeat production - 17" touch color screen - Integrated technology data - Automatic shut-off - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet Ndedpsxw Urysfx Abxed - Integrated e-shop Data Transfer - USB interface - RJ-45 network socket Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 on TruDisk 4001 • Extended pallet extraction • Dust protection device panel • Viewing window left • Side viewing windows right • Storage interface • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Condition: used, functionality: fully functional, Year of construction: 2019, TRUMPF TruDisk 4006 (6 C) – High-Performance Solid-State Laser with KLH Cooling Unit RW 20/0 SK Description: The TRUMPF TruDisk 4006 (6 C) is an industrial high-power solid-state laser delivering 4 kW laser output, engineered for precise applications such as laser welding, cutting, and cladding. The system is distinguished by its high energy efficiency, stability, and outstanding beam quality. Combined with the KLH Kältetechnik RW 20/0 SK cooling unit, it is ideally suited for use in automated production lines, robotic cells, or CNC manufacturing systems. Technical Specifications Laser (TRUMPF TruDisk 4006 (6 C)) Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 4006 (6 C) Equipment No.: L4216M0390 Serial No.: 20-10-03-A604 Year of manufacture: October 2019 Nsdjxwc Trjpfx Abxjdd Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 22 kW / 23 kVA Nominal current: 32.5 A / 400 V Frequency: 50 – 60 Hz Protection class: IP 54 Weight: 820 kg Short-circuit capacity (SCCR): 50 kA CE marking: Present Technical Specifications Cooling Unit (KLH RW 20/0 SK) Manufacturer: KLH Kältetechnik GmbH, D-18209 Bad Doberan Model: RW 20/0 SK Model No.: 0393710 Serial No.: 17KLH00670 Year of manufacture: 2017 Refrigerating capacity: 10.2 / 12.9 – 20.4 / 21.5 kW Voltage: 400 / 460 V Frequency: 50 / 60 Hz Refrigerant: R134a (3.7 kg), hermetically sealed system Max. operating pressure: 20.5 bar CE marking: Present Automation Level: Designed for fully automated manufacturing systems. The laser is engineered for integration into robotic systems, CNC machines, or custom production cells and supports standard interface protocols (Ethernet, fieldbus, analog signals) for industrial automation.

Condition: good (used), functionality: fully functional, Year of construction: 2006, laser power: 4,000 W, AVAILABLE AT SHORT NOTICE: TRUMPF Trumatic L 3030 - 4 kw - Year 2006 TECHNICAL DATA: Make: TRUMPF Type: L 3030 - 4 kw Year of manufacture: 2006 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 4,000 watts Max. Sheet thickness mild steel: 20 mm Max. Sheet thickness stainless steel: 15 mm Max. Sheet thickness aluminum: 10 mm Operating hours: NC Machine regularly serviced by TRUMPF! Transmitter tube: new 2024 TASC laser control: new 2022 Driver stage: replaced 2018 Magnetic bearing electronics: new 2016 STANDARD EQUIPMENT: - Closed machine frame with integrated laser unit Laser unit: TLF 2000 high-frequency excited CO2 laser, maintenance-free turboradial blower, mirror telescope, cooling unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/waste - Drives: maintenance-free three-phase servomotors - Cutting head quick-change device - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Programmable cutting gas pressure setting - APC capacitive height control and process control - AutoLas Plus automatic focus position adjustment - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for the production of small holes - PMS plasma sensor technology - Automatic sheet edge detection - Programmable power cycles - Microweld - Automatic switch-off - Work area lighting - Sinumerik 840D control system: open control system on PC basis, simple operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice - Workshop programming ToPs 100 lite - Safety: multi-beam light barriers, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin - 3.5" floppy disk drive - TFT color screen - Electrical equipment: Voltage 400 V / 50 Hz - Paint finish: Standard RAL 9002/5010 Ndjdouthz Tepfx Abxjd EXTENDED EQUIPMENT: - TLF 4000 laser incl. lens monitoring sensors - PCS Process Control System

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 6,537 h, laser source model: TruFlow 3200, laser power: 3,200 W, table length: 3,000 mm, table width: 1,500 mm, table height: 2,200 mm, TECHNICAL DETAILS Table length: 3,000 mm Table width: 1,500 mm Ndedjxxt E Uopfx Abxod Table height: 2,200 mm Laser power: 3,200 W MACHINE DETAILS Control: Siemens Laser model: TruFlow 3200 Dimensions & Weight Dimensions (L x W x H): 9,300 mm x 4,600 mm x 2,200 mm Weight: 12,000 kg Operating hours Beam on: 6,537 h Laser on: 39,930 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 34,151 h, General Data Machine weight 12000 kg Measurements height 2400 mm Dimensions Machine Length 11100 mm Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Number of axis 3 Laser power 5 kW Nodsxyl I Rjpfx Abxjdd Movement X-Axis Movement 3000 mm Z-Axis Movement 115 mm Y-Axis Movement 1500 mm This 3-axis TRUMPF TRULASER 5030 was manufactured in 2008, featuring a 5 kW CO₂ laser and Siemens Sinumerik 840D control. It handles a working range of 3,000 × 1,500 × 115 mm and speeds up to 200 m/min. Ideal for cutting mild steel up to 25 mm, stainless steel up to 20 mm, and aluminium up to 12 mm. Consider the opportunity to buy this TRUMPF TRULASER 5030 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: excellent (used), Year of construction: 2007, Technical data: 2D laser machine CNC control: SIEMENS Laser type: CO2 Working area: 4000 x 2000 x 115 mm Laser power: 5 kW Cutting capacity (steel): 25 mm Cutting capacity (stainless steel): 20 mm Cutting capacity (aluminium): 12 mm Max. workpiece weight: 1250 kg Ndodpfx Ajxyavvebxsd automatic pallet changer CE marking electrical equipment for three-phase current: 400 V / 50 Hz Dimensions (L x W x H): approx. 12,000 x 5,300 x 2,600 mm Weight: approx. 15 t The seller assumes no liability for typing or data transmission errors. The machine's condition regarding appearance, technology, and wear is commensurate with its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 2009, TECHNICAL DETAILS Year of manufacture: 2009 Punching force: 22 tons Control: Siemens Sinumerik 840 D Punching working area: 3,085 x 1,650 mm Combined working area: 2,585 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Max. punching diameter: 76.2 mm Rapid traverse X / Y / simultaneous: 90 / 60 / 108 m/min Tool holder: Hydraulic mono-tool holder, 360° rotation Hold-down device: Programmable for repositioning operations Chip handling: Chip bin Laser unit: High-frequency excited CO₂ laser TruFlow Laser working area: 3,085 x 1,650 mm Laser power: 2,700 watts Laser cutting heads: 5" lens, 7.5" lens, quick-change cutting head system Distance control: DIAS Cutting technology: HI-LAS high-pressure cutting Functions: AutoLas, ContourLas Laser control: TASC 3 MACHINE DETAILS Width: 2,400 mm Length: 8,700 mm Height: 7,800 mm Total weight: 22,500 kg NC operating hours: 70,683 h Laser cutting hours: 12,068 h EQUIPMENT - Parts chute 500 x 500 mm, sensor-monitored - 2 finished parts bins - AutoLas - Ejector cylinder at laser chute - Automatic tool length compensation - Tool spray lubrication - Punch slug extraction - 2nd lubricant tank - Multi-beam light barriers - Hydraulic quick-stop - Extraction and compact dust collector - MultiTool function Ndedpfoxwc Rwsx Abxjd - Softpunch function - Thread forming function

Condition: used, functionality: fully functional, Year of construction: 2019, TRUMPF TruMicro 7060 (FK03) – Ultra-short Pulse Laser Description: The TRUMPF TruMicro 7060 (FK03) is a high-performance ultra-short pulse laser designed for demanding applications in micromachining. With its extremely short pulse duration in the picosecond range, it enables precise, burr-free, and thermally minimal processing of various materials—ideal for electronics, medical technology, and precision engineering applications. Its compact design and high beam quality make it perfectly suited for use in automated production lines or research systems. Technical Data: Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruMicro 7060 (FK03) Equipment No.: L1570M0211 Ndsdjxwcy Eopfx Abxjd Serial No.: 20-09-05-A10 Year of manufacture: March 2019 Supply voltage: 380 V (–10%) … 460 V (+10%), 3 AC + PE Power consumption: 6 kW / 6.3 kVA Rated current: 9 A / 400 V Frequency: 50 – 60 Hz Protection class: IP 54 Weight: 830 / 510 kg (main and supply unit) Short-circuit withstand capability (SCCR): 5 kA CE marking: available Automation Level: Suitable for fully automated production systems. The laser is designed for integration into CNC, robotic, or special-purpose machines and can be fully automated via digital interfaces and bus systems (e.g. EtherCAT, Profibus).

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 82,000 h, control type: CNC control, controller manufacturer: Siemens, laser type: CO₂ laser, laser hours: 33,000 h, laser power: 5,000 W, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 12 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, Equipment: cooling unit, dust extraction, safety light barrier, SPECIAL OFFER!! AVAILABLE IMMEDIATELY! Offer valid until Wednesday, 26.11.2025!! TRUMPF Trumatic L 3050 – 5 kW MACHINE FULLY REFURBISHED IN 2018! TECHNICAL DATA: Make: TRUMPF Model: Trumatic L 3050 – 5 kW Year of manufacture: 2003 Working area: 3,000 x 1,500 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 5,000 watts Max. sheet thickness (mild steel): 25 mm Ndjdpexg Nh Usfx Abxod Max. sheet thickness (stainless): 20 mm Max. sheet thickness (aluminium): 12 mm Operating hours: approx. 82,000 h / 33,000 h STANDARD EQUIPMENT: - Enclosed machine frame with integrated laser unit - Laser unit: TLF 5000 CO2 laser, RF excited, chiller unit, logbook function - Automatic pallet changer - Longitudinal conveyor belt for small parts/scrap - Drives: Gantry drive combined with linear direct drives - Laser power control - HI-LAS high-pressure cutting - Plasma sensor PMS - High-speed processing with SprintLas - ContourLas for small hole production - Programmable power cycles - Microweld - Programmable cutting gas pressure adjustment - Laser cutting head with 5" lens and laser cutting head with 7.5" lens - Quick-change system for cutting heads - Automatic sheet metal edge detection - Capacitive height control (DIAS) - Process Control System (PCS) - Positioning laser diode - Automatic focus position adjustment AutoLas Plus - Automatic shutdown - Work area lighting - SIN 840D control: Open PC-based control, easy operation, online help, diagnostic functions, maintenance logbook, technology data, teleservice - Shopfloor programming ToPs 100 lite - Safety: Multi-beam light barriers, fully enclosed and nitrogen-flushed beam guidance, monitoring system, multi-chamber extraction and compact dust collector, safety cabin - Network connection: BNC/RJ-45 network port - Electrical equipment for 400 V / 50 Hz three-phase power - Paint finish: White structural paint RAL 9002 / gentian blue RAL 5010 ADDITIONAL EQUIPMENT: - Additional laser cutting head with 9-inch lens

Condition: used, functionality: fully functional, Year of construction: 2008, machine/vehicle number: A0235A0225, Working area 3,000 x 1,500 x 115 mm Ndedpfx Abexx Ddnsxjd Control Siemens Sinumerik 840 D Laser power 4,000 Watts Max. sheet thickness mild steel 20 mm Max. sheet thickness stainless steel 15 mm Max. sheet thickness aluminum 10 mm STANDARD EQUIPMENT: - Enclosed machine frame with integrated TruFlow 4000 CO2 laser unit including NitroLine, beam tube ventilation with N2 and LensLine, cooling unit - Additional high-dynamic Xp-axis - Motion unit for high-precision machining - Drives with maintenance-free three-phase servo motors - Enclosed beam guidance - Automatic pallet changer with longitudinal conveyor belt - Laser logbook function - Laser cutting head with 5" lens - Laser cutting head with 7.5" lens - Quick-change cutting head device - Programmable cutting gas selection / pressure setting - Programmable power cycles - Automatic sheet edge detection - ControlLine - FocusLine Plus - Laser power control - Positioning laser diode - NitroLine - Microweld - PlasmaLine - ContourLine - SprintLine - Spraying device - Automatic shutdown - Work area lighting - Siemens SINUMERIK 840D control: open PC-based control, user-friendly interface, USB port, online help, diagnostic functions, maintenance logbook, RJ45 network connection, 3.5" floppy drive, TFT color screen - Workshop programming with TruTops laser lite - CE marking - Safety features: multi-beam light barriers, multi-chamber extraction, compact deduster, and machine enclosure with polycarbonate panels Reason for sale: We have purchased a new one.

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, CNC Laser Cutting System TruLaser Cell 3000 (L34) fiber X x Y x Z working area (max, mm): 800 x 600 x 400 Control: TRUMPF HMI based on Sinumerik 840 D solution line Laser power: 3,000 watts Operating hours: 31,875 h Laser on time: 3,286 h Machine High-dynamic and precise CNC laser machine Machine body made from mineral casting Axis system in cantilever design Axis travel range: 800 x 600 x 400 mm X-Y axes with linear direct drives Absolute measuring system with glass scales Z-axis with linear guide and ball screw drive Panel PC for process monitoring Integrated electrical cabinet and water/air machine chiller Protective enclosure active Active, sensor-monitored safety system, laser protection class 1 for laser power > 1000 - 8000 W - automatic lift door with personnel protection - double-walled side protection doors - safety window Technology package CutLine Professional Process adapter for cutting with gas supply FocusLine Focus diameter adjustment ControlLine Digital camera system for process monitoring Cutting optics adjustment device For aligning the cutting optics with the laser beam Technology package WeldLine - Welding functionality with FocusLine Professional - Welding gas supply for 3 gases Process adapter Welding f150 Crossjet Swivel axis focusing optics Torque axis for 3D processing with direct measuring system Swivel angle optics ± 135° Clamping frame with set of clamping bridges Modular system for fixture mounting Height adjustable 640-940 mm 1x clamping bridge each short/long 2D cutting table 800 x 600 mm For cutting sheet metal up to 6 mm Rotary axis C180 for machining rotationally symmetrical parts 3-jaw chuck d=125 Status lights Multi-touch unit MF-L1000 dust extractor External dust extraction system with a volume flow of 1,000 m³/h Filter system with automatic cleaning Power supply and control via the laser machine Function control MF-L1000 Reactive safety device for fire detection and suppression TruDisk 3001 TruDisk 3001 laser unit (4 C) Diode-pumped disk laser with beam quality of 4 mm mrad Laser power at workpiece: 3,000 W Consists of: - Laser with 1 cavity - Integrated laser power supply and real-time capable controller for evaluation and visualization of operating data - Fast laser power regulation - TruControl 1000 controller: - CPU with real-time operating system - 2x USB interface - 24x digital I/O interface, configurable as real-time interfaces - Expandable with fieldbus interfaces - Storage capability for 199 laser programs - Intelligent water management (CLK) with water-to-water heat exchanger and operating status display on control panel - Safety monitoring according to laser protection class 1, incl. central safety interlock - Housing for max. 4 laser outputs - Protection class: IP54 Control panel OP84 - Removable operating panel for laser unit control Ndodpfx Abexur Iaoxsd - 8.4" touchscreen with rotary push knob - Buttons: Emergency stop, power on/off Beam guidance consisting of: - Optical assembly for 1 laser light cable D - Central safety interlock - Switching time 50 ms - Output 1 with 100% with safety interlock - Pilot laser per laser light cable output incl. electrical control Chiller unit

Condition: used, functionality: fully functional, Year of construction: 2010, Table length: 3000 mm Table width: 1500 mm Control: Siemens Sinumerik 840 FL Ndjdpfx Aexu I Trsbxed Max. workpiece weight: 1800 kg Laser power (watts): 4000 Sheet thickness (steel): 22 mm Sheet thickness (stainless steel): 20 mm Sheet thickness (aluminum): 20 mm Sheet thickness (copper): 8 mm Total power requirement: 53 kW Approx. machine weight: 12,000 kg Operating hours: Beam ON: 32,569 h Laser ON: 78,133 h

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 50,115 h, MACHINE DETAILS Laser power: 2700 W X-travel: 2585 mm Y-travel: 1280 mm NC: 50115 h Laser ON: 49819 h Beam time: 12287 h EQUIPMENT Nodpfx Abjtt Nr Tsxedd - Sturdy C-frame - Coordinate guide with integrated linear magazine, 21 places for tools and clamping claws - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - Laser unit: TLF 2000 high-frequency excited CO2 laser, vibration-insulated, integrated in machine frame, incl. cooling unit and DIAS 3 laser controller - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Programmable cutting gas pressure setting - Laser cutting head: 5" lens, quick-change device, APC distance control - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Sinumerik 840D control system, 10.4" TFT color screen, online help, diagnostic function, 3.5" floppy disk drive, RJ45 network connection - Safety: multi-beam light barriers, quick shutdown hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 2700 laser incl. 7.5" cutting head for stainless steel - AutoLas Plus - MultiTool function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 2 x additional clamping claw - Blow-out device for small parts - BNC network connection instead of RJ45 connection

Condition: used, functionality: fully functional, Year of construction: 2017, machine/vehicle number: 20-10-03-A105, TRUMPF TruDisk 5001 (6 C) – High-Power Solid-State Laser Description: The TRUMPF TruDisk 5001 (6 C) is an industrial high-power solid-state laser engineered in Germany, designed for demanding applications such as laser welding, laser cutting, cladding, and surface processing. The TruDisk series is renowned for its outstanding beam quality, long-term stable performance, and reliability in continuous 24/7 operation. This laser is ideally suited for integration into automated production cells, robotic systems, or CNC machinery. Technical Data: Manufacturer: TRUMPF Laser GmbH, D-78713 Schramberg Model: TruDisk 5001 (6 C) Equipment No.: L4211M2236 Serial No.: 20-10-03-A105 Year of manufacture: April 2017 Ndjdpfsxv D Alex Abxod Rated voltage: 380 V (–10 %) … 460 V (+10 %), 3 AC + PE Power consumption: 28 kW / 29.5 kVA Rated current: 42 A / 400 V Frequency: 50 – 60 Hz Protection rating: IP 54 Weight: 820 kg CE marking: present Degree of Automation: Suitable for fully automated production lines. The TruDisk 5001 can be fully integrated into robotic or CNC controls via fieldbus, Ethernet, or analog interfaces and is prepared for Industry 4.0 applications.

Condition: ready for operation (used), Year of construction: 2010, This TRUMPF TruLaser Cell 7040 was manufactured in 2010. It features a CO2 laser cutting system with extensive travel ranges: X-axis up to 4000mm, Y-axis up to 2000mm, and Z-axis up to 1000mm. Maximum travel speeds reach 173 m/min, enhancing productivity. It includes a 60 GB hard drive and supports ELA USB and Network programming on Windows 7. For more information about this machine, please reach out to us. Application Types Nsdpfx Asxuawvsbxodd Cutting

Condition: used, functionality: fully functional, Year of construction: 2007, operating hours: 22,372 h, laser hours: 11,345 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, overall weight: 16,000 kg, total length: 11,600 mm, total width: 5,200 mm, total height: 2,200 mm, working range: 40,002,000 mm, Equipment: cooling unit, Standard Features: • Enclosed machine frame with integrated laser unit • Laser unit: TruFlow 2000 CO₂ laser with high-frequency excitation, maintenance-free turboradial blower, reflector telescope, cooling unit, logbook function • Automatic pallet changer • Longitudinal conveyor belt for small parts/waste • Drive: Maintenance-free three-phase servo motors • Cutting head quick-change device Laser cutting head with 5" lens and laser cutting head with 7.5" lens • Programmable cutting gas pressure setting Ndsdpsv Sm Rujfx Abxed • ControlLine capacitive height control and process control • Automatic focus adjustment with FocusLinePlus • Laser power control • Positioning laser • NitroLine high-pressure cutting • Fast processing with SprintLine • Automatic production of smaller holes • PlasmaLine plasma sensors • Automatic sheet metal surface and edge detection • Programmable Performance cycles • Microweld • Spray device for safe thick sheet processing • Automatic blow-off system • Residual heat extraction • Sinumerik 840D control system: Open PC-based control, easy operation, online help, integrated e-shop, diagnostic functions, maintenance logbook, technology data, teleservice • TruTops Laser lite workshop programming Safety: • Multi-beam light barriers, fully encapsulated and ventilated beam guidance, monitoring system, multi-chamber extraction and compact dust extractor, protective cabin • RJ45 network connection via installation via teleservice • 3.5" floppy disk drive • TFT color display More powerful lasers: • TruFlow 4000, including NitroLine Plus, nitrogen beam tube ventilation and lens monitoring sensors Extended machine equipment: • PierceLine Process Control System • A total of 2 Machine auxiliary pallets, structural steel webs • Crane-mounted traverse for manual pallet handling • Pneumatic cutting

Year of construction: 2010, condition: ready for operation (used), Laser power: 2000W, wavelength: 10.6µm, working dimensions X/Y/Z: 3000mm/1500mm/75mm, max. material thickness mild steel/stainless steel/aluminum: 15mm/6mm/5mm, max. table load: 550kg, travel speed: 60m/min, positioning accuracy: +/-0.1mm, repeatability: +/-0.03mm. Machine dimensions X/Y/Z: approx. 7400mm/3300mm/2300mm, weight: approx. 8900kg. Documentation available. An on-site inspection is possible. Ndjdpfx Ajxxzh Dsbxod

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Ndedpfoxfim Iox Abxsd Laser on: 42,130 h

Year of construction: 2010, condition: ready for operation (used), For sale is a CNC laser cutting machine from TRUMPF. laser power: approx. 3000W (3kW), working area: X/Y/Z 3000mm/1500mm/115mm. Additionally, a suitable Liftmaster from the year 2015 is offered, which can also be purchased separately. Ndsdjxxa Ucspfx Abxsd

Condition: excellent (used), Year of construction: 2011, Beam on: 26,620 h Laser on: 49,485 h Njdpfxexfh Evj Abxsdd