Used Center lathes 0-299mm turning diameter over bed for sale (97)

Condition: used, turning length 800 mm turning diameter 280 mm turning diameter over slide rest 150 mm spindle bore 42.0 mm tailstock quill taper MT 3 MK bed width 208 mm turning speeds 42 - 2022 U/min spindle taper DIN 55027/5 quill stroke 90.0 mm voltage 380 V total power requirement 3.0 kW weight of the machine ca. 750 kg range L-W-H 1800 x 800 x 1250 mm Due to its design (type, performance, feed rates, etc.) it can be used successfully in training workshops, but also for toolmaking and repair shops. Dq2Qkj Equipment: - robust conventional lead/spindle lathe - WMW 3-jaw chuck Ø 150 mm - faceplate 280 mm - MULTIFIX quick-change holder, with insert - movable tailstock - chuck key - machine base with storage area - pole-changing drive motor - operating instructions

Condition: good (used), Year of construction: 1995, Description Control Sinumerik 810M Spindle speed 5000 rpm Turret head 12 - position Table clamping surface length 850 mm, width 325 mm Very good condition, regularly serviced. Operating instructions German Number of axes 3 (X, Y, Z) Travel path X 420mm, Y 330mm, Z 240mm Control: Sinumerik 810 M Max. spindle speed 5000 rpm Automatic tool changer for 12 tools 88Bma7Kkq SK40 holder Coolant system

Condition: excellent (used), Functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: Dq2Fad A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: reconditioned (used), Precision guide and spindle lathe Make: GDW Model: LZ 250 S Year of manufacture: 1998 - overhauled, repainted RAL7035 light gray Mach. no.: 069 Centre height: 125 mm Centre width: 500 mm with guarantee geometric acceptance with test report Accessories: Oil3Xyb - 3-axis digital display ISKAR NP-20T-V with V = c for constant cutting speed - Quick-change tool holder base body size A - Bed stop - Coolant system - Chuck protection hood, electrically secured - Chip rear wall - Operating instructions - Used as seen -

Condition: excellent (used), Year of construction: 2010, G.D.W Tower Type RD 250 Veq7882A Complete machines Video Available

Condition: used, machine/vehicle number: 88-30, height of centers: 107 mm K3Iij center distance: 350 mm max. circulation-Ø over bed: ueber Bett 200 mm spindle boring: 25 mm retainer taper tailstock: 2 MK spindle speed: 35 - 3500 rpm forwarding feed: laengs u. plan mm/U thread pitch: 0,2 - 3 mm electrical connection: 380 V, ca. 2,2 kW space needed: 600 x 1300 x 1230 mm weight: 850 kg

Condition: excellent (used), Year of construction: 1987, Functionality: fully functional, Leit- und Zugspindeldrehmaschine Weiler Matador VS2 - Partially Refurbished Item Number: 04-03-224 Manufacturer: Weiler Condition: Very good general condition Partially refurbished Delivery time: Immediate (subject to prior sale) Specifications Year of Manufacture: Approx. 1987 Dimensions (L x W x H): Approx. 1500 x 1000 x 1700 mm Weight: Approx. 600 kg Digital Display: New 3-axis digital display from Sino Capabilities and Dimensions Maximum turning diameter over bed: Approx. Ø280 mm Maximum turning diameter over support: Approx. Ø160 mm Maximum turning length: Approx. 500 mm Bar capacity: Approx. Ø36 mm Spindle Speed range: Approx. 15–3550 RPM Spindle nose: A 2-5 Drive power: Approx. 3.0 kW Automatic longitudinal and face feeds: Feed range approx. 0.05–0.80 mm/rev Threading capability: Metric: 0.20–12 mm Imperial: 80–2 threads/inch Diametral pitch: 160–6 DP Module: 0.1–4 Tailstock Quill taper: MK3 Included Accessories New Sino 3-axis digital display New 160 mm 3-jaw chuck Quick-change tool post size A + 1 holder Bed stop New work lamp New cooling system Complete documentation Emergency stop system Various wrenches Machine leveling feet New electrical chuck guard New collet chuck system 386E New collet set 386E Optional Accessories Lead screw and feed rod cover Drill chuck Dqj08D Live center Additional quick-change holders Further accessories available upon request. Price and Additional Technical Details Please contact for price and additional technical specifications.

Condition: good (used), Year of construction: 2001, machine/vehicle number: 368, second-hand WEILER PRIMUS VC lead and feed spindle lathe built in 2001 with digital readout in 3-axis SIEMENS SICOMP IMC 05 Dqlqlp center height 140mm Center width: 500mm Spindle speeds from 30-4,000 rpm Chuck protection electrically fused. 1 x three-jaw lathe chuck Ø140mm, Multifix steel holder size A with 5 inserts, 1 x rotating copying point, 8 machine shoes, coolant device, machine light. Lead and pull spindle covered. (Machine has been repainted) Machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.

Condition: excellent (used), Functionality: fully functional, Weiler Primus guide and feed spindle table lathe, great condition!!! Technical data: >> Year of manufacture approx. 1988 Machine no. 3448 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 x three-jaw chuck 125 mm NEW with 2 sets of jaws >> Collet device NEW with collets NEW from 2 mm to 25 mm 1 mm increasing >> Mulifix size A with 2 steel holders >> Change gears Dqz3Sl >> Fixed bezel >> Faceplate >> Spindle cover About the machine: Offered is a Weiler Primus guide and pull spindle table lathe with base cabinet in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus comes from a state-owned company where it was rarely used. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site under power and see for yourself its condition. Digital display available for an additional charge

Condition: good (used), MOMAC SC 200 NC teach-in turning machine Fagor 8050 TC CNC control year of construction 1999 max. turning diameter 400 mm max. turning diameter above bed 200 mm max. turning length 1000 mm speed 0-2300 rpm spindle passage 52 mm tool changer 8 positions 1x fixed pair of glasses 1x glasses moving including tool holders/extra jaws and documentation Do2Oxd machine is connected for inspection

Condition: used, Year of construction: 1982, greates pass round over bed 297 mm swing diameter over slide rest 160 mm turning length 500 mm centre distance 500 mm turning speeds 15 - 3550 U/min spindle head Gr. 5 (DIN 55022) spindle bore 36 mm tailstock quill taper MT 3 tailstock quill stroke 90 mm Srrbf3Zja tailstock adjustment 500 mm 1440 / 2830 1/min engine output 3 / 2,2 kW weight 0,8 t dimensions of the machine ca. 1,40 x 0,70 x 1,20 m Chuck protection device with electrical switch-off Tool cabinet with various contents

Condition: new, Year of construction: 2025, Immediately available stock machines subject to prior sale. Please contact us for an offer. Emcomat 14 D conventional lathe center width 650 mm Center height 140 mm Max. Speed 4000 rpm Spindle connection size 4 (DIN 55029) Max. Drive power 7,5 kW Dimensions (LxWxH) 1280 x 1480 x 730 mm Machine is equipped with digital display. (Constant cutting speed within gear stage) Bbfyd7Ldm8 As a regional factory representative of EMCO we offer maintenance, service and spare parts for conventional machines from EMCO. Visit our showroom in Stuttgart and contact us for a qualified consultation.

Condition: used, turning diameter: 240 mm, turning length: 800 mm, controller manufacturer: SONY, machining diameter: 240 mm, CONTROLS .. digital read out SONY WORKING RANGE TURNING Pjidozizk .. swing diameter (max): 240 mm .. worpiece length max.: 800 mm + digital read out + MULTIFIX tool fixture

Condition: used, machine/vehicle number: 11756, second-hand WEILER LZ 280 sliding headstock and sliding headstock lathe center height 125mm center width: 800mm spindle speed approx. 26-2000 rpm 1 x three-jaw lathe chuck Ø 125mm with inner and outer jaws, brand new Multifix size A with 2 interchangeable holders Emergency stop/switch unit, rear chip guard, all change wheels present, drive disk, storage tray, machine light, new socket, 15 collets from Ø 3.5 - 18.5 mm, collet clamping tube, Dqppjl fixed point and MK 2 sleeve for clamping tube, bed stop, chuck protection cover, various turning tools and operating instructions. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: used, Vöst-Alpine DA 160 SW 650 mm SH 160 mm. Multifix A Div. tools. Inwof77U8 3 jaw chuck. 4 jaw chucks Set of collets.

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm C92K9Ti Weight 2635 kg

Condition: as good as new (ex-display), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: ZSI69276VM, Centre lathe Myford 254V Plus - unused, like new. Fully functional. Machine did not do any work, I have many extra equipment parts visible in the attached pictures. Bought privately in 1996 - I am a private seller. Ctxtogu3Uc

Year of construction: 1986, Condition: used, Weiler Primus lathe year ca.1986, three-jaw chuck , Multifix. Machine in a good condition , By arrangement under power ready for demonstration. Gonvcxqt2X

Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 1092, A Weiler Primus LZ/G lead and feed spindle lathe is for sale. The Weiler Primus LZ/G impresses with its high quality workmanship and precision. Ideal for demanding turning operations in the workshop, it is suitable for both one-off production and series production. Technical data: Machine no.: 1092 Centre height 120 mm Centre width 430 mm Speed: 60 - 3000 rpm in (18 gear stages + 2 motor speeds) Spindle passage 23 mm Tailstock MK 2 Feed rates longitudinal: 0.03 to 0.30 mm/rev transverse: 0.015 to 0.150 mm/rev Possible threads metric, inch, module and diametric pitch Metric thread pitches from 0.25 to 2.5 mm Drive power: 1.1 + 1.5 kW (2 motor stages) Weight approx. 375 kg Space requirement: 1200 x 660 x 1300 mm (LxWxH) Accessories and equipment: - 3-axis Digital display - Three-jaw chuck Röhm ZG 125mm with 10 sets of jaws, original Röhm - Mulifix size A with steel holder - Spindle protection - Change gears - Collet device with collets from 1.5 to 20mm - Continuously adjustable bed stop in the Z-axis - Revolving center - Additional 16A socket with motor protection switch for accessories - Emergency stop - Various keys as shown - Suitable grease gun Tzesevbck - Manual including spare parts list

Condition: used, machine/vehicle number: 24333, Used LEINEN DLZ 140 center lathe and feed spindle lathe center height 140mm Center width: 600mm spindle speeds from 15-3100 rpm 1 x three-jaw lathe chuck Ø160, 1 x four-jaw lathe chuck Ø160, 1 x faceplate Ø250, chuck guard, Quick-change steel holder size A with 8 inserts Lever collet device with 50 collets C93Ephi Rotating center point with tool cabinet with 4 drawers and 1 compartment. Incl. various clamp holders, tips etc. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. A viewing of the machine is possible by arrangement.

Condition: ready for operation (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 02850401, turning diameter over cross slide: 345 mm, spindle bore: 71 mm, turning diameter: 670 mm, turning diameter over bed slide: 535 mm, center height: 260 mm, center width: 935 mm, feed length X-axis: 330 mm, quill stroke: 120 mm, quill diameter: 65 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 21 rpm, type of input current: three-phase, overall weight: 1,510 kg, quill mount: MK 5, workpiece weight (max.): 800 kg, three-jaw chuck diameter: 250 mm, LED lighting with digital length measuring system Acu-Rite 200S without chuck Dqygyf spindle brake drive motor power 7.5kW spindle head DIN 55027 size 6 longitudinal feed 0.07-4mm/rev (66 steps) planar feed 0.035-2mm/rev (0.035-2mm/rev)

Condition: repair required (used), Year of construction: 1960, turning diameter over bed 500 mm turning diameter over slide rest 300 mm turning length 1000 mm total power requirement ? kW Dqumjn weight of the machine ca. 1,5 t dimensions of the machine ca. 2,5*1*1,5 m

Condition: excellent (used), L&Z Lathe make Schaublin 125 Center height 135 mm Center width 400 mm Speed from 68 - 2500 n1/min. Lathe chuck F 160 Multifix size A Collet chuck device with 44 collets Heidenhain three-axis digital readout Drive flange for turning heart Length : 1430 mm Hmj9Phenm Width 800 mm Height 1800 mm with pallet Weight 1100 kg

Year of construction: 1986, Condition: used, Weiler Primus lathe built approx. 1986, three-jaw chuck, Multifix. Machine in good condition, ready for demonstration under power on request. Bkk9Tvmuxsk

Condition: used, machine/vehicle number: 1717, second-hand WEILER PRAKTIKANT sliding headstock and sliding headstock lathe Gpesik center height 140mm center distance: 500mm spindle diameter: 36mm spindle speeds from 42-2,000 rpm with RSF 3-axis digital readout chuck protection electrically fused with Multifix steel holder head size A with 3 inserts Lever collet device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. An inspection of the machine is possible by arrangement.