Used Bens 250 for sale (18,635)

Condition: used, Vise jaw width 200 mm Jaw height 80 mm Plate: Width below 250 mm Less than 500 mm length Opening width 250 mm Fpjlhccqsdd Tpijqsg Weight 72 kg

Condition: good (used), Manufacturer: Demag Fpjlhccqoth Ry Djqog Lifting capacity: 250 kg Lift: 2,3 m

Condition: good (used), We offer for sale a Heraeus heating and drying oven. Heraeus heating and drying oven manufacturer HERAEUS Type: 6200 condition: Used in good condition air mixing oven: up to 250°C Fpslhcovzqyfscqqjg Internal volume: 180 liters temperature controller and timer air mixing voltage: 2800watt 1 phase 230volt 50Hz 12.3A IP20 External housing: width 800 mm, length 890mm, height 810 mm. Internal dimensions: width 510 mm, length 550 mm, height 650 mm weight: 100kg

Condition: new, Year of construction: 2022, approx. 100.16 running meters, height: 250 cm, shelf load: 3000 kg, pallet racking, heavy-duty racking, high-bay racking, industrial racking, racking immediately from stock Data : - Height : approx. 250 cm - D : approx. 110 cm Fslhcjwhng Ujcqqspg - L : approx. 100.16 running meters - Load: 3000 kg shelf load - Galvanized uprights - Cross beams 270 x 14 x 5 cm, T30 - Cross beams in orange - New BLT / PR25 - manufactured in Europe & tested according to the current DIN EN 15512 standard. - 100% quality at the best price. Shelf consists of : - 037 x upright approx. 250 cm x 110 cm, disassembled. - 144 x crossbar approx. 270 x 14 x 5 cm, T30. - 288 x safety pins. - Levels: Floor + 2 - 324 pallet spaces incl. floor spaces. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price : 8690,00 € net plus legally valid VAT. You will receive an invoice with VAT shown. The pre-assembly of the frames can be carried out by us for a small surcharge of 12.50 €/net per piece. Transportation : On request, delivery can be carried out by our partner shipping company, the costs for this depend on the zip code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - track width 250mm - shaft width 350mm - shaft diameter 80mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 150mm - table top width with clearance 700mm - table top length 1790mm from above: - pawls - pressure, sliding shaft - pawls - pressure, smooth shaft - shaft with saws - smooth, pressure shaft 2pcs from below: - guide bar - sliding, smooth shaft - pawls Fpslhccqjr Iildsqjg - caterpillar feed table - roller width 500mm - number of rollers 3pcs - total dimensions of the feed table length/width/height 580x530x900mm receiving table - roll width 500mm - number of rolls 6pcs - total dimensions of the receiving table length/width/height 1210x535x900mm - central lubrication - smooth regulation of the feed speed - main engine 37kW - diameter of the exhaust port 140mm - total dimensions of the multi-saw length/width/height 2000x1450x2000mm - total weight about 3000kg ADVANTAGES - German production - large cutting height - feeding and receiving table - used multi-saw, very good condition Net price: PLN 46900 Net price: EUR 11030 Net price calculated according to the exchange rate of PLN 4.25/EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: new, Year of construction: 2025, For Sale: Mobile Limestone Crushing and Screening Plant - Contact Us 24/7 The CONSTMACH PI-2 Mobile Limestone Crushing and Screening Plant is an excellent solution for those seeking high performance and portability. With a production capacity of 250-300 tph, it can be used with confidence in any project. It has a maximum feed size of 950 x 950 mm and a feeding height of 4.2 meters, allowing it to easily process large stones. The primary impact crusher and 3-deck screen configuration ensure that materials are separated efficiently and quickly. Crxhlpbna0 With a total motor power of 400 kW and a requirement for an 1100 kVA electric generator, it delivers powerful and uninterrupted performance. The plant weighs 55 tons and has a compact structure measuring 15 meters in length, 3.2 meters in width, and 4.2 meters in height. Mounted on wheels with hydraulic opening legs, the single chassis design effectively meets your mobile crusher needs. This plant is ideal for those in search of a mobile crusher, offering time and cost savings with its quick setup and easy portability. It demonstrates superior performance, especially in mobile limestone crushing operations. Manufactured with CONSTMACH quality, the PI-2 Mobile Limestone Crushing and Screening Plant stands out in the industry with its durability and high efficiency. Its reliable and robust structure provides long-term usage benefits for your projects. This unique plant will simplify your operations and increase your efficiency. PI-2 Mobile Limestone Crushing and Screening Plant Technical Specifications Production Capacity: 250-300 tph Maximum Feed Size: 950 x 950 mm Fpslhccqoufd R Hjqsg Feeding Height: 4.2 meters Main Configuration: Primary Impact Crusher + 3-Deck Screen Total Motor Power: 400 kW Electric Generator Requirement: 1100 kVA Plant Weight: 55 Tons Plant Dimensions: 15(L) x 3.2(W) x 4.2(H) meters Chassis Type: Single chassis on wheels equipped with hydraulic opening legs.

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Holder: long taper diameter 80 mm Fpolhccqjfimg Hoqeg with external thread 125 x 3 mm Keyway 10 mm fe with flange and jaws 193 mm Weight 29 kg Age is estimated

Condition: like new (used), Year of construction: 2001, operating hours: 183 h, frequency: 50 Hz, fuel: diesel, We have a used generator with a Perkins engine for sale, in mint condition and with a silencer. Technical specifications: Manufacturer: FG Wilson Model: P250H Engine: Perkins 6-cylinder turbo diesel, water-cooled. Power: 250 kVA / 200 kW RPM: 1500 rpm Frequency: 50 Hz Fslhccov R Eg Seqqjpg Voltage: 230/400 volts Operating hours: 183 hours Year of manufacture: 2001 - Includes control unit - Includes batteries - Includes silencer - Includes circuit breaker - Location: 24229 Dänischenhagen - Delivery is available for an additional charge.

Condition: good (used), Year of construction: 2010, saw blade diameter: 250 mm, overall weight: 130 kg, coolant pump power: 100 W, motor voltage: 380 V, Huvema HU250 DV cold circular saw for sale Manufacturer: Huvema Type: HU 250 DV Year of manufacture: 2010 Voltage: 400 V 50 Hz Fslstwdviohccqqopg Mounted on a tripod, rotating head, quick clamp. 2-speed motor Liquid cooling with pump Dimensions of the saw blade: 250 x 32 mm Cutting capacity 45° straight: 50 x 60 mm Cutting capacity in a 45° circle: 65 mm Cutting capacity 45° square: 55 mm Cutting capacity 90° straight: 55 x 95 mm Cutting capacity in a 90° circle: 70 mm Cutting capacity 90° square: 70 mm Dimensions: Height: 150 cm Width: 60 cm Length: 90 cm Weight: approx. 150 kg

Condition: good (used), Turning diameter over bed: 500 mm turning length: 2000 mm Fpolhsik Hbloccqqjg Turning diameter over slide: 340 mm

Condition: excellent (used), Catalog number 7445 TECHNICAL DATA - track width 250mm - shaft width 400mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 140mm - table top width with clearance 730mm - table top length 2120mm *from above: - pawls - smooth pressure shaft - pawls - smooth pressure shaft - shaft with saws - 2 smooth pressure shafts from below: - guide - smooth sliding shaft - pawls - caterpillar - central lubrication - 2 lasers - smooth feed speed adjustment - feed motor 1.1kW - main motor 37kW - electric lifting of the body 0.75kW - electric lifting of the shaft with saws 0.75kW - diameter of the exhaust nozzle 200mm - overall dimensions length/width/height 2200x1850x2100mm - weight about 3000kg ADVANTAGES - German production - laser - electric lifting of the body and shaft - smooth regulation of the feed speed - used multi-saw, very good condition Fpeljug Ugushccqqsg Net price: PLN 119,900 Net price: EUR 28,200 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: new, Year of construction: 2025, For Sale: 250 TPH mobile crushing plant - Contact Us 24/7 The CONSTMACH JC-3 Mobile Jaw Crusher is a product that stands out for its high efficiency and user-friendly design. With a production capacity of 250-300 tph, this mobile stone crushing plant delivers excellent performance even in large-scale projects. The JC-3, with a maximum feed size of 1,100 x 850 mm, ensures reliability while operating at high capacity. The 4.5-meter feeding height offers ease of use, and the configuration of a primary jaw, secondary cone, and 3-deck screen allows for the precise processing of various materials. With a total motor power of 450 kW and a requirement for an 800 kVA electric generator, it provides powerful and uninterrupted operation. Weighing 100 tons, the CONSTMACH JC-3 combines portability and stability with its two-chassis design. The first chassis measures 13(L) x 3.4(W) x 4.5(H) meters, while the second chassis measures 20(L) x 4.4(W) x 4.5(H) meters. The double chassis on wheels, equipped with hydraulic opening legs, enables quick and easy setup on-site. This mobile crusher can be quickly moved on-site and minimizes setup time. Its robust yet flexible structure delivers superior performance in crushing and screening various materials. The CONSTMACH JC-3 is the ideal solution for those looking for a mobile crusher, offering high efficiency and durability that will be an essential asset to your projects. The JC-3 is an excellent choice for your mobile crushing and screening needs, exceeding your expectations with its reliability and outstanding performance. JC-3 - Mobile Hard Stone Crusher Technical Specifications Fpjlheufd A Njccqqjg Dppnbv Production Capacity: 250-300 tph Maximum Feed Size: 1,100 x 850 mm Feeding Height: 4.5 m Main Configuration: Primary Jaw + Secondary Cone + 3-Deck Screen Total Motor Power: 450 kW Electric Generator Requirement: 800 kVA Plant Weight: 100 Tons (total weight of two chassis) Plant Dimensions: 1st chassis: 13(L) x 3.4(W) x 4.5(H) meters 2nd chassis: 20(L) x 4.4(W) x 4.5(H) meters Chassis Type: Double chassis on wheels with hydraulic opening legs.

Condition: excellent (used), Stair Tensioner Fpololn Ulaehccqqjg (28366) Clamping height 200 - 250 mm T grooves width 12 mm Clamping screw M 10 4 pieces available Weight 8,5 kg

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 253,000 mm, load per truss pair (max.): 2,000 kg, number of shelf rows: 10, shelf length: 25,300 mm, support length: 2,700 mm, frame height: 7,500 mm, 10 rows of pallet racks (10 x M75112711-4) each 25.3 m long, 7.5 m high, 1.1 m deep, each with 9 bays, 2.7 m wide, each with 4 beam levels, shelf load 2000 kg. - 100 frames (RM7511 - RAL5019) - 200 base plates, shims, and screws - 400 ground anchors (ZZBA1210) Fpelhccqev Uqwdoqog - 720 single crossbeams (T27114 - RAL2008) - 2 collision protection / impact protection (ZRS40901) - 4 flank protection (ZFL4090D) - 120 spacers / connectors for double rows (ZAbh20) - 10 load plates (BSMcP) Frames bolted, not pre-assembled Freight / Delivery: - max. 20 working days after receipt of payment - ex works site / installation location - Unloading from the truck is carried out by the buyer using their own lifting equipment - Deliveries are made throughout the Federal Republic of Germany; except islands! Deliveries to EU countries are subject to individual agreement.

Condition: like new (used), Year of construction: 1991, Functionality: fully functional, pressing force: 250 t, type of input current: three-phase, power: 30 kW (40.79 HP), motor voltage: 200 V, input voltage: 200 V, Equipment: safety light barrier, AIDA NC2-250(1) 250t eccentric press in excellent condition /ctA2/ Manufacturer: AIDA Folsu Dxb Tohccqqepg Type: NC2-250(1) Push force: 160t Year of manufacture: approx. 1991 Stroke length: 170mm Distance above table: (adjustable) 280-400mm Table size: 2700x760mm Bear size: 2100x700mm Electrical power: 3x200V(!!), 30kW - Japanese standard Net weight: 35000kg Size: 2760x2800x3980mm Automatic greasing system. Automatic cutting oil dosing - RAZIOL EST-02 Optionally with disc winder and straightener.

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva Fslhcewbp Erocqqjpg -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), CATALOGUE NUMBER 7212 TECHNICAL DATA - track width 250mm - shaft width 400mm - shaft diameter 80mm - max. disc diameter 400mm - disc hole diameter 80mm - max. cutting height 140mm - table top width with clearance 730mm - table top length 2130mm from above: - pawls - pressure, sliding shaft - pawls - pressure, smooth shaft - shaft with saws - smooth, pressure shaft 4pcs from below: - sliding, smooth shaft - pawls - caterpillar feeding table + guide strip - roller width 460mm - feeder dimensions length/width 1660x630mm - total dimensions length/width/height 2010x630x900mm outfeed table - 8 pulling rollers - roller width 800mm - total dimensions length/width/height 4400x980x880mm - central lubrication - electric lifting of the body up/down 0.55kW - electric adjustment of the shaft with saws 0.55kW - smooth adjustment of the feed speed 1-39m/min - feed motor 1.1kW - main motor 30kW - diameter of the exhaust nozzle 210mm - total dimensions of the multi-saw length/width/height 2520x1870x2000mm + control - total weight approx. 2500kg ADVANTAGES – German production – large cutting height – feed and receiving table Folhcceqzhiqjqqepg – multi-saw used, very good condition Net price: PLN 99,900 Net price: EUR 23,500 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2014, The portal hydraulic press is designed for bending or straightening and finished welded elements as well as for dismantling mining and other machine assemblies. It is used in mechanical, production, repair plants, etc. Manufacturer: PATENTUS S.A. Type: PAT 300-2/250-2 Year of production: 2017 Technical parameters: Dimensions: width: 4200x3140 mm, height: 3600 mm Weight: 25000 kg Table surface: 4200 mm x 2140 mm Diameter of the cylinders of the gate 1: 2 x 300 mm Diameter of the cylinders of the gate 2: 2 x 250 mm Pressure of the cylinders of the gate 1: 2 x 1768 kN Pressure of the cylinders of the gate 2: 2 x 1228 kN Clearance max. 1240 mm Working cylinder stroke: 600-660 mm Gate travel: 1420 mm Equipment: - two gates - table - working cylinders x 4 - gate travel cylinder - working cylinder travel cylinder - power unit with pump T-100/30 (2006 with renovation in 2011) Technical condition: used, for inspection Fpolhccohktq Ajqqeg

Condition: good (used), We offer you here a used shelf connector of the manufacturer SSI Schäfer for sale. Technical data of the shelf connector: Manufacturer: SSI Schäfer Included in the scope of delivery: 01x shelf connector used material colour: blue Shelf spacing: approx. 250 mm L-profile: approx. 40 x 40 mm Weight/pc: approx. 0.536 kg/pc. Fpslhccqed Ttz Rjqeg 02x hexagon head screws, M8 x 20 8.8. 02x hexagon nut, M8 02x washers, M8

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, type of input current: AC, vibrating bowl feeder Vibrating feeder RNA SRC-N 550mm diam vibrating feeder with controller Manufacturer/Typ: RNA SRC-N 250-2R Top bowl diameter: 550 mm Bowl diameter bottom: 250 mm voltage: 230 volts 50Hz protection: ip 44 vibration frequency at 100Hz: 6000 /min vibration controller Bowl diameter bottom: 250 mm Bowl diameter top: 380 mm Felhccjwav R Soqqopg Inner bowl height: approx. 70 mm overall dimensions: height: 700mm width:600mm weight:80g in good condition! If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA track width 250mm shaft width 220mm max. disc diameter 300mm disc hole diameter 60mm cutting height 100mm table width 650mm table length 1460mm - from above: 2 rows of pawls smooth sliding shaft shaft with saws Fslhevxu Aleccqqjpg smooth, sliding shaft - from below: guide pawls caterpillar 2 types of feed speed + smooth central lubrication feed motor 1.2kW main motor 21kW extraction nozzle diameter 180mm overall dimensions L/W/H 1700x1450x1500mm weight approx. 1800kg – Italian production – DTR documentation – solid machine – used multisaw, very good condition Net price: PLN 25,900 Net price: EUR 6,090 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Your contact person in our home Mr: André evening Mr: Marcel Brahms Mr: Simon blank We offer you here a used studs for roller conveyors for sale. When placing the order the required stand height & stand depth please! Included in the scope of delivery: 01 x used studs, Material color: completely galvanized Stand height: 250 mm to 700 mm (freely selectable in turn) Stand depth: 300 to 700 mm (freely selectable in turn) More treble & bass can be customized on request. Our services at a glance: (Prices on request) -Installation, construction our general conditions of erection are to be observed -Shelf testing Shelf inspection according to DIN EN 15635 carried out to comply with the BGR 234 Visual inspection for all shelf systems -Delivery with our own fleet of vehicles Fpjlhcjdf S Eyscqqsg (without discharge) Free shipping on request!

Condition: excellent (used), Catalogue number: 7548 TECHNICAL DATA track width 250mm shaft width 250mm max. disc diameter 350mm disc hole diameter 80mm max. cutting height 120mm table width with clearance 700mm table length 1790mm *from above: pawls smooth pressure shaft pawls smooth pressure shaft shaft with saws 2 smooth pressure shafts from below: Felhjvx Rcuoccqqjpg guide smooth slip shaft pawls track central lubrication 1.1kW feed motor 30kW main motor electric lifting of the body manual lifting of the shaft with saws diameter of the exhaust port 160mm overall dimensions length/width/height 2250x1700x2000mm weight approx. 3000kg – German production – electric lifting of the body and shaft – smooth regulation of the feed speed – used multi-saw, very good condition Net price: PLN 76900 Net price: EUR 18090 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS suitable for frame profile width: approx. 70 mm for shelf distance: approx. 250 mm dim. head plates: 130 x 60 mm profile dim.: U 62 x 45 mm Weight: approx. 1,660 kg | pcs. Fslhccqsi Hpkxjqjpg General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Fpslhei Dfizeccqqeg for shelf distance: approx. 250 mm total length: approx. 330 mm cross section: U 30 x 52 mm Material color: blue weight: 0,46 kg | pcs.