Used multi spindle machines for sale (172)

Condition: good (used), Year of construction: 1977, functionality: fully functional, - 6 spindles - max. bar diameter: 32.0 mm - guide tubes Djdpfjz Iz D Isx Ap Aowd - chip flushing system - accessories: cams + gears - SEMA bar feeder bundle (1989)

Condition: used, Year of construction: 2004, Tornos MultiDeco 20/8 Number of spindles: 8 Maximum bar diameter: 20 mm Spindle speed: 5000 rpm Main spindle power: 15 kW / 18.5 kW Maximum part length: 100 mm without backworking; 75 - 80 mm with backworking Number of backworking spindles: 1 Backworking spindle axial travel: 160 mm Backworking spindle motor power: 1.1 kW CNC control unit: Fanuc Programming system: TB-DECO software platform IEMCA integrated automatic bar feeder High-pressure coolant pump and fine filtration system Automatic chip conveyor The machine is in working condition and can be inspected upon request. Dwodszy Spujpfx Ap Ajd

Condition: used, Year of construction: 2012, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2012 Control : Siemens 840 D Pre-processing Manufacturer:Index Type:A 200 Year of construction:2012 Control system:Siemens 840 D Number of slides:5 pieces Bar feeder:IEMCA Master 880 Chip disposal:Chip conveyor Processing 1 (OP10): Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Processing 2 (OP20): Dsdpfxj Ah Nc Uj Ap Aowd Manufacturer:Index Type:MS 40 C Year of construction:2012 Control system:Siemens 840 D Number of spindles:6 pieces Parts handling:Streuli robot Chip disposal:Chip conveyor Coolant supply:IKZ system Linkage: Robots:Kuka Parts transport:Conveyor belts

Condition: good (used), Year of construction: 2010, functionality: fully functional, DMG Gildemeister GMC20, manufactured in 2010 • Siemens 840D Powerline control system • Six spindles plus 6-2 backworking • All front spindles with X, Z, and W axes • Hainbuch SZ9012B2 collet chucks on the front, equipped with Hainbuch collets in sizes 6 mm, 10 mm, 12 mm, 14 mm, 16 mm, 20 mm, and 24 mm; bar feed accessories included • 9012 ETPU special collet chuck installed on the rear. Various sizes from 3 mm to 22 mm included Dwodpo Adp H Nofx Ap Asd • HP cutting oil supply • Front tool stations with 30-degree taper on all six spindles. 25 holders included • 15 turning tool holders with 12x12 cross-section • 4 round tool holders with 16 mm diameter • Double “X” axis driven tool holder for use in position 5 • Single “X” axis driven tool holder for use in position 4 • Single “Z” axis driven tool for use in 6-2 backworking • Iemca SIR 25P bar feeder • Part ejector, collection device, conveyor belt, and collection container • Losma Filtermist • Kraft & Bauer fire extinguisher

Condition: good (used), Year of construction: 1987, operating hours: 800 h, functionality: unexamined, 1pc. Cam-controlled multi-spindle automatic lathe Schütte AF51 Series 09-06 Year 1987 8-spindles ø max. 51mm. 1pc. IEMCA PRA bundle loader (interface available) 33 different cam sets included (see accessories list for details) 1 pc. Balluff Mini Controller BMC 1 pc. Chip conveyor 10 different change gear sets (see accessories list for details) 8 ø28mm round collets (see accessories list for details) Dedpfxou Edp Se Ap Aowd Paint finish light blue & light gray

Condition: good (used), Year of construction: 2006, Number of working spindles: 6 pieces Bar spindle diameter capacity: 32 mm Working spindle maximum speed: 6000 rpm Spindle chuck diameter: 40 mm Maximum number of tool carriers: 12 pieces Tool carrier travel distances: X = 72 mm, Z = 100 mm Part catcher receiver available in 6.1 position KNOLL chip conveyor In-machine air intake filtration system available (ventilation) Weight: 7,200 kg Dsdpfx Ajrqzzpop Aewd Magazine: IEMCA 3300 mm capacity bar feeder

Condition: ready for operation (used), Year of construction: 1980, operating hours: 84,892 h, bar diameter (max.): 14 mm, number of axes: 6, This 6s TORNOS AS 14 multi-spindle turning machine was manufactured in 1980. It features 6 spindles and comes with guide tubes and a bar feed guide rack/stand. If you are looking to get high-quality turning capabilities, consider the TORNOS AS 14 machine we have for sale. Contact us for further details. Dwjdpo Ah H E Uofx Ap Asd - Max. Bar Diameter (Round): 14 mm- Max. Bar Diameter (Hexagonal): 12 mm- Max. Bar Diameter (Square): 10 mm- Max. Feed Length: 75 mm- Spindle Speeds: 900 - 6,000 RPM- Optional Equipment: Guide tubes (AS14), bar feed guide stand/tubes Technical Specification Counter Spindle Yes

Condition: good (used), Year of construction: 2018, Further details will be provided via email upon request. Dsdpfx Aj Af U Dcsp Ajwd

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 41015, Technical Characteristics: Work Area • Chuck diameter: 210 mm • Maximum workpiece diameter/height: 200/200 mm • X1/X2 axis stroke (working stroke): 160 mm / Rapid traverse in X: 24 m/min • Z1/Z2 axis stroke: 250 mm / Rapid traverse in Z: 30 m/min Main Spindle • Spindle configuration: 4 spindles (twin machining + twin loading) / A2-6 size • Distance between spindles: 282.5 mm • Maximum speed: 4500 rpm • Power: 18.5 kW Turret with Driven Tools • Turret configuration: 2 turrets Dwodpfx Apsxwmcws Aod • Number of positions: 2 x 10 • Maximum speed: 4000 rpm / Power: 3.7 kW Electrical Equipment • Operating voltage: 400 - 480 V, 120 A • Connected load: 66 kVA Dimensions • Total dimensions: Length = 3336 mm (with chip conveyor), Width = 2400 mm, Height = 1760 mm • Weight: 7000 kg Main Features and Capabilities: • CNC Control: FANUC 0i-TF Plus • Main spindle: High power and wide speed range • Driven tools: Capability for milling and drilling operations • Chip conveyor • Fully enclosed work area • Chip extractor • Cooling system for electrical panel • Lubrication system • Hydraulic oil cooling unit • Automation interface for robot integration installed • Documentation: Available in electronic and printed formats Machine Condition: • Status: Operational

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Manufacturer: SCHüTTE Type: SF 26 Dwedpfx Asy Ed Atep Aod Year of construction: 2015 Type of control: Digital Control: Digital Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, spindle motor power: 26 W, number of spindles: 2, spindle speed (max.): 5,000 rpm, spindle bore: 77 mm, Equipment: documentation/manual, MAZAK QTN-250 II MSY turning center + Fanuc robot with Meccano automation for flanges Year 2015 Control unit: MATRIX II Maximum swing (capacity): 640 Workable diameter / standard workable diameter (capacity): 380 Maximum workable length*1 (capacity): 500 Bar capacity (capacity): 77 Chuck size (main spindle): 250/210 Spindle speed (main spindle): 4500/5000 Spindle nose (main spindle): ASA 8 / ASA 5 Spindle speed (powered tool spindle): 5000 Rapid traverse rate axis X (feed): 36,000 Dwsdpfozz Rh Eox Ap Ajd Rapid traverse rate axis Z (feed): 36,000 Rapid traverse rate axis C (feed): 550 Travel (tailstock): 500 Main spindle motor (continuous / 40% duty) (motors): 26 kW Coolant tank (coolant): 300 l Sub-spindle chuck diameter: 210 Sub-spindle speed: 5000 Travel axes X, Z, Y: 230mm, 575mm, 100mm

Condition: used, Year of construction: 2018, Technical details: Dodpfx Ajz Sr Duep Aowd weight of the machine ca.: 3,5 t

Condition: good (used), Year of construction: 2004, Number of spindles: 8 Maximum bar feed in one station: 130 mm Maximum bar feed in two stations: 260 mm Dsdow Rfcdspfx Ap Ajwd Maximum stroke of radial slide: 52 mm Adjustment of radial slide: +/- 12 mm Maximum stroke of axial slide: 72 mm Maximum stroke of tool spindles: 106 mm Adjustment of tool spindles: +/- 10 mm Speed of main spindles: 500 - 4,000 rpm Cycle time: 2 - 80 s Number of tool positions: 18 Weight: 12,600 kg Bar loader: PIETRO CUCCHI (standard)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17KX216770001, Technical Specifications: Work Area - Maximum turning diameter: 230 mm (120 mm with loader) - Maximum machining diameter: 200 mm - Maximum workpiece length: 145 mm (75 mm with loader) - X1/X2-axis travel: 130 mm / Rapid traverse in X: 24 m/min - Z1/Z2-axis travel: 145 mm / Rapid traverse in Z: 24 m/min - Y1/Y2-axis travel: ±40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis travel: X - Left 200 mm / Right 1600 mm; Y - 550 mm; Z - 155 mm; α 180˚ - Maximum feed rates (m/min): X - 160; Y - 120; Z - 35; α 180˚/1 sec - Load/unload gripper specs (pneumatic): Outer diameter Ø90 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle - Spindle size: Standard (6" / 8") / 165 mm / 205 mm - Maximum speed: Left & right 45–4500 rpm - Motor power (100% duty cycle): Left 15 kW / Right 7.5 kW Turret with Driven Tools - Tool interface: BMT55 - Number of stations: 12 (right), 12 (left) – turret with driven positions - Maximum speed: 4000 rpm; milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 200V, 3-phase, fuse 151 A - Total connected load: 31 kVA Dimensions - Machine dimensions (L×W×H): 3950 × 2715 × 2800 mm - Weight: 4,400 kg Main Features and Capabilities - Horizontal design for optimized chip evacuation; gantry loading/unloading from conveyors - Automation: Gantry robot with two loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip conveyor - Coolant filtration: Up to 40 bar, micron filter (Evotech 500PRO) - Coolant chiller: Texa TCW55PMSBCDX00, SN165373 - Process control: Marposs T25 - Broken tool detection: Peek tool menu (Murata/Fanuc option enabled) - Documentation: Electronic/manual available Dedpjxxi Ncjfx Ap Aowd Machine status: IN OPERATION

Condition: ready for operation (used), Year of construction: 2011, operating hours: 27,865 h, bar diameter (max.): 24 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 6, This 6-axis Index MS 22 multi-spindle turning machine was manufactured in 2011. It features a Siemens Sinumerik 840D control system and includes a bar loader system with a maximum pressure of 6 bar. The machine is equipped with a Knoll coolant/filter system and various tooling attachments for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the Index MS 22 machine we have for sale. Contact us for further details. - Nominal Voltage: 400 V- Rated Current (In): 99 A- Short Circuit Current (Icu): 50 kA- Peak Current (I2): 3.6 kA- Maximum Backup Fuse: 100 A- Rated Power: 64 kW- Connected Load: 67 kVA- Frequency: 50 Hz- Control Voltage: 24 VDC- Operating Hours: 124,075 h- Hydraulic Operation Hours: 61,189 h- Operating Time: 37,971 h- Production Time: 27,865 h- Control System: Siemens Sinumerik 840D powerline (Index C200-4D) with Dual NCU- Bar Loader System: IEMCA / SIR MS22 P flat loader, Type 33 (YOM: 2011, Pressure: 6 bar, Mass: 100 kg, Voltage: 400 V / 50 Hz, Current: 7 A)- Material Feeders: 1 set Ø12 with reducer tubes, 1 set Ø18 with reducer tubes, 1 set Ø24- Clamping Heads: Ø9, Ø10, Ø12 – Ø18, Ø20 – Ø22- Knoll Coolant/Filter System (YOM: 2011): 1x high-pressure pump (80 bar, 24 l/min), 1x high-pressure pump (40 bar, 55 l/min), 1x low-pressure pump (300 l/min at 4 bar)- Tooling Drive Connections: 2x electrical connections on NCU 1, 3x electrical connections on NCU 2- Tooling Attachments: 1x polygon turning device, 3x powered tool holders ER11 (i = 1:2, max speed 12,000 rpm), 1x powered tool holder VDI25 (i = 1:1, max speed 6,000 rpm)- Back-machining Unit: on slide 6.3 (with 2x powered tool holders, 1x fixed holder, i = 1:2, max speed 12,000 rpm)- Optional Equipment: Fire suppression system, Coolant mist extraction and filtration system (SH 2000-PEV-T/TR, two-stage design), Integrated ARTIS process monitoring system Technical Specification Counter Spindle Yes Dwsdpfx Apez Ahy Is Ajd

Condition: good (used), Year of construction: 2007, Details will be provided via email upon request. Dodpj Af Uzzsfx Ap Ajwd The following repairs were carried out on this machine by Index:  New collet chuck  New clamping cylinder  New part removal system  New PCU (presumably referring to a Programmable Control Unit)  New display screen  New synchronization spindle

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Control: Index Bar loader: Index/Hydag Dwjdoyzicwspfx Ap Ajd Maximum bar diameter: 42 mm Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 49C7264, 8-spindle automatic lathe (90), make Schütte, model AF32, year 1988, SN 49C7264, bar feeder by Pietro Cucchi with integrated chip conveyor, with C-axis and control, make Siemens, model Sinumerik System 3 Dodpfx Apoy Drcls Ajwd

Condition: used, Year of construction: 1973, 3 Gildemeisters AS32-6 in good state for sale - must go due to cessation of activities Dwjded S E Itjpfx Ap Ajd Different separate spare parts available, among which a new tapping device, a new bronze crown wheel for the main drive, a cross drill device, several gripping spindles for processing the rear of product and several other spare parts €9.500 per Gildemeister

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, Machine for beveling, deburring, and sharpening bars and pipes. Maximum diameter approximately Ø63 mm. Dodpfsx Htbusx Ap Aewd

Condition: like new (used), Year of construction: 2015, Pick-up Threading device No. 04 turning slides Dwsdpfx Aoyck Rdep Ajd Integrated loader Cucchi BLT model MULTI-6, year 2016

Condition: used, Year of construction: 2011, Micro 8 automatic lathes and LNS Tryton bar feeders. Dedpfx Ajzz Nl Nep Aowd

Condition: repair required (used), Year of construction: 1989, 6 spindles Dwjdpfx Apov R Uqte Aed Thread cutting Cross drilling Thread rolling Milling attachment Many accessories Feed motor (curves) defective! with IEMCA PRA 40/32 P bar loader

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder Dwodozdtn Tspfx Ap Ajd (4m bar length) Accessories

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar loader (4m bars) Accessories Dsdszdttijpfx Ap Ajwd