Used CNC lathes 350-399mm turning diameter for sale (102)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, Functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive Bwslswcfgbjinl Rfjl New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: used, Year of construction: 2016, turning diameter 366 mm turning length 700 mm control Celos Mitsubishi M730U turning diameter over bed 920 mm turning diameter over cross slideways 742 mm max. turning speeds 4.000 min/-1 Bwjlinswgwnlol Rfjl drive capacity - main spindle 18,5/18,5/15 kW max. rod diameter 80 mm number of tool places 12 Pos. tool taper BMT 80 x-axis 260 mm z-axis 795 mm y-axis +/- 50 mm mm tailstock taper MT5 weight of the machine ca. 4,7 t The machine has been overhauled with the following components: - Ball screws in the X, Y, and Z axes - New main spindle - Complete maintenance package - Recalibrated and recalibrated This puts the machine in like-new technical condition. Technical Features: - 12-position BMT 80 tool turret, max. speed 10,000 rpm, 5.5/5.5/3.7 kW - Y-axis - Overhang for driven tools 100 mm - Scraper-belt chip conveyor - Coolant system with increased pressure of 5 bar Accessories: - Coolant shower on the main spindle chuck - Compressed air blow-off system for tool cutting edges - Line filter for coolant system - Compressed air blow-off system for tailstock center - Mechanical I/F for 150 mm oil mist separator - 4-color signal light - EtherNET I/P interface for automation Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, Control: MSX-850III Travel: X-260 mm, Z-1,345 mm; max. turning length: 1.298 mm turning diameter: 356 mm Swing diameter: 755 mm Standard turning diameter: 275 mm Rod diameter: 80 mm Rapid: 30 m/min Spindle speed: 4,000 rpm Spindle motor: 18.5/15 kW tool turret: 12 powered stations Drive power AGW: 5.5/3.7 kW Speed driven tools: 6,000 rpm programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws programmable tailstock: 7 m/min Tailstock travel: 1.284 mm Quill diameter: 110 mm Total power requirement: 35 kVa Beliewg Egvsnl Rfowl programmable hydraulic Lynette SLUB3 SMW Autoblok: Clamping range: 12-152 mm Tool measurement: Tooleye measuring arm equipment: Kitagawa B210 jaw chuck, various holders, driven tools, jaws

Condition: used, Year of construction: 1999, turning diameter 400 mm turning length 600 mm control Turn Plus CNC Pilot 3190 total power requirement 44 kVA Belinl Rowgkcpsfowl weight of the machine ca. 5 t dimensions of the machine ca. 6 * 2,5 * 2 m Machine has been in use until now ( 2-axis turning ) Known defects: - Driven tools without function - Tailstock leaking - out of service - Sporadic problems hydraulics / leaking

Condition: good (used), Year of construction: 2005, Ref. -No.: 10453 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2005 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Country of origin: South Korea Belinl Rjwf Iiwofjwl Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 2001, Gildemeister NEF 520 CNC Lathe TECHNICAL DATA Working Area Swing over bed: 500 mm Swing over cross slide: 290 mm Chuck diameter: 250 mm Cross travel: 260 mm Center distance: 850 / 1350 mm Turning Spindle Spindle head DIN 55027 Size: 8 Spindle bore diameter: 70 mm Spindle mount: metric 80 Spindle diameter in front bearing: 120 mm Main drive AC Drive power: 12 kW Max. torque: 920 Speed range: 10 – 3000 rpm Gear ratios: 2 Switchable speeds: Continuously variable Feed drive X-feed force: 5000 N Z-feed force: 10000 N Bjljwftvisinl Rfswl X-rapid traverse: 8 m/min Z-rapid traverse: 10 m/min Multifix tool carrier; Size: C Tailstock Quill diameter: 80 mm Quill stroke: 180 mm Quill mount: MK5 Dimensions L x W x H: 2900 x 1953 x 1825 mm Weight: 2700 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Gildemeister lathe SMW Autoblok Hi-Grip high-precision chuck Chuck jaws Multifix tool holder Complete operating documentation Exact scope of offer as shown in the photo gallery We assume no liability for the accuracy, completeness, or timeliness of the information provided.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, Mazak SQT-250 CNC Lathe (2) Belinov Srzrsl Rfewl Year: 2002 With tailstock and conveyor Supplied with several tools With all documentation In good condition

Condition: like new (used), Year of construction: 2007, operating hours: 1,234 h, Functionality: fully functional, turning diameter over cross slide: 290 mm, turning diameter: 380 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 20 rpm, travel distance X-axis: 166 mm, travel distance Y-axis: 339 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 30 m/min, total length: 2,885 mm, total width: 1,720 mm, torque: 72 Nm, overall weight: 4,000 kg, bar passage: 56 mm, chuck outer diameter: 1,670 mm, spindle nose: 120 h5, Equipment: documentation/manual, Gildemeister CTX210 in new condition and we took it over from a school/training institute. The machine has only 364 spindle hours and 1234 operating hours! The machine is very complete with original Schunk 3-jaw and various driven and static VDI-30 holders. Bwslinljwcftno Rfel The machine can be viewed in operation by appointment!

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, CNC Lathe with Bar Feeder Manufacturer: Mazak Model: Quickturn Nexus 250-II MSY Bwslinl Rewdh S Njfol Year of Manufacture: 2016 Technical Specifications: Travel X – Y – Z axis: 230 / 100 / 575 mm Machining diameter: 380 mm Bar diameter: 76 mm Machining length: 538 mm Speed: 5,000 rpm Bar feeder: LNS O.L. SERVO S2 With robot interface Automatic door opener

Condition: good (used), Year of construction: 1983, turning diameter 340 mm turning length 290 mm centre height 160 mm control Sinumerik 810T spindle bore 53 mm turning speed range 60 - 4000 U/min Boliowbi Iyjnl Rfjwl quill stroke 120 mm diameter of quill 60 mm tailstock quill taper MT 4 tool change unit 8 fach total power requirement 13 kW weight of the machine ca. 2200 kg dimensions of the machine ca. 2,4 x 2,0 x 1,9 mm CNC lathe - cycle controlled

Condition: good (used), Year of construction: 2003, Ref. -No.: 10454 Manufacturer: DOOSAN Type: DAEWOO PUMA 300 MSC Year of construction: 2003 Type of control: CNC Control: FANUC 18i-TB Storage location: Halberstadt Bolinswfy Acsl Rfewl Country of origin: South Korea Machine-No.: 0MS19XX Turning Speeds: 4500 RPM Bar passage: 62 mm Turning Length: 595 mm Turret places: 12 Pcs Further information: - 4 axes (X/Z/C/B) - counter spindle - driven tool station - finished part removal system - conveyor belt - chip conveyor - Powercool coolant system - LNS Quickload Servo 3 bar loader - tool holder - collet holder - collets Machines can be inspected under power by appointment.

Condition: good (used), Year of construction: 1998, Parts shown by hand not come. Technical data are shown on picture. Bolinljwb Aqno Rfswl

Condition: used, Year of construction: 2008, Functionality: fully functional, Mazak Quick Turn Nexus 250 II Universal 500 CNC Lathe (2010) Manufacturer: Mazak Type: Quick Turn Nexus 250 II Universal 500 CNC Lathe Year of manufacture: 2008 Commissioning: 09/2010 Control system: Mazatrol Matrix Nexus Condition: used, under power, in production Speed 4000 rpm Spindle nose A2-8″ Spindle bore 88mm Power (30min operation) 26KW Chuck diameter 10″ Max. Swing diameter 610mm Max. Machining diameter 350 mm Turning length 475 mm Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min X-axis travel 190 mm X-axis travel 515 mm Tailstock holder MK5 Tailstock travel 525 mm Number of tools 12 Turret indexing time 0.2s Length 2473mm width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery - 1 set of manuals - Machine feet - Automatic parts catcher Conveyor belt - Chip conveyor Hinged belt - Chip chuck - 6x tool holder Bwjliowbfrnonl Rfel - High pressure pump 20 bar - Tailstock programmable with M-code - Tool eye - Bar feeder prepared - Automatic machine switch-off Note: without LTA oil mist extraction system

Condition: like new (used), Year of construction: 2017, operating hours: 13,538 h, turning length: 705 mm, turning diameter: 366 mm, spindle bore: 91 mm, spindle speed (min.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 795 mm, spindle motor power: 19 W, overall weight: 6,360 kg, spindle nose: JIS-A8, CNC controller: MITSUBISHI M-730UM (ERGOLINE TOUCH "CELOS") Capacity X-axis travel mm: 260 Y-axis travel mm: +/- 50 Z-axis travel mm: 795 B-axis travel mm: 734 Turning length mm: 705 Max. turning diameter mm: ø: 366 Swing over bed mm: ø: 920 Bar work capacity mm: 80 Upper turret Number of tool slots St .: 12 Speed driven tools RPM: 10.000 Main spindle Speed spindle rpm: 4.000 Drive power spindle kW: 18,5 / 15 Spindle bore mm: 91-111 Manufacturer: KITAGAWA Spindle nose: JIS-A8 Counter spindle Speed spindle rpm: 6000 Spindle bore mm: 73 Manufacturer: KITAGAWA Spindle nose: JIS-A5 Coolant system Tank capacity liter: 366 Equipment Chip conveyor Bjljwam Insinl Rfewl Part catcher Mist collector Workarea light Blowing air outside the spindle CE conformity Coolant gun Working time hours Under power: 13.538 Potencial nominal kVA: 43 Cutting Time: 4.466 Basic machine dimensions / weight Length mm: 2.106 Width mm: 3.981 Height mm: 2.200 Weight kg: 6.360

Condition: as good as new (ex-display), Year of construction: 2025, S600M - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control system is characterized by performance, speed, precision, and long service life. • Heavy-duty design • Renishaw measuring arm for manual tool measurement • Recirculating ball screw with improved accuracy, rigidity, and heat resistance. • Siemens servo motors on all axes • 45° inclined bed design for particularly large machining diameters • Improved, unobstructed chip drainage into the chip tray • Hydraulic three-jaw lathe chuck Ø 200 mm • Sauter VDI 40 tool changer with 12 tool positions and driven tool • Hardened and precision-ground ball screws for high rapid traverse speeds in all axes • Dimensionally stable linear guides ensure a long service life through maximum static and dynamic rigidity • Manual tool measurement device • Tailstock with hydraulic quill • Portable, electronic handwheel with enabling button and emergency stop push button • Belt-type chip conveyor ensures efficient chip removal • Coolant system with cleaning gun Tools included: • 2 axial holders for driven tools • Radial holders for driven tools • 3 square cross-mounted holders • Square transverse mount • Square longitudinal mount • ER 32 collet set (6, 8, 10, 12, 16, 20 mm) • EMC (Electromagnetic Compatibility) Features Linear guide • Maximum static and dynamic rigidity Bweliswbc R Ionl Rfol • High positioning accuracy Tool turret • Hydraulic VDI 40 turret • All 12 stations are driven by an integrated motor designed for speeds up to 4,000 rpm Communicative • Front interfaces: USB 2.0, RJ45 Ethernet, Compact Flash (CF) card PPU 270 control system • 10.4" color display • 4:3 format System software • PPU 271 SW 24 Complete package • Safety Integrated • Residual material detection and processing • ShopMill Work Step Programming • Manage Network Drives • 3D Simulation • Simultaneous Recording • Dimensions and Weights Length approx. 4570 mm Width/Depth approx. 1845 mm Height approx. 1955 mm Weight approx. 4200 kg Working Areas Lathe Chuck Diameter 320 mm Turning Length 475 mm Swing Diameter over Machine Bed 570 mm Swing Diameter over Cross Slide 400 mm C-Axis (Factory Option) Angular Accuracy 51" Repeat Accuracy 20" Motor Torque X-Axis 11 Nm Z-Axis 11 Nm Speed Range Speed Range 30 – 4000 rpm Rapid Traverse Speed X-Axis 24 m/min Z-Axis 30 m/min Electrical Data Connection Voltage 400 V Electrical Connection Total Connected Load 40 kVA Accuracy Repeatability ± 0.002 mm Positioning accuracy ± 0.004 mm Hydraulic system Chuck diameter 51 mm Inclined bed 45° Tailstock MK 5 chuck mount Quill stroke 100 mm Quill diameter 100 mm Quill stroke, hydraulic control Spindle Spindle mount DIN ISO 702-1 No. 6 Main spindle: Hydraulic lathe chuck 200 mm Spindle taper A2-6 Main spindle: Spindle bore 65 mm Travel path X-axis 235 mm Z-axis 530 mm Vertical spindle Drive motor power, continuous operation S1: 11 kW Drive motor power, S6-30% operation: 22 kW Drive motor torque 70 Nm Drive motor power, S6-30% operation: 140 Nm Drive motor power 4.82 kW Maximum permissible speed at the tool coupling: 6000 rpm Maximum tool torque: 20 Nm

Condition: excellent (used), Year of construction: 1992, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm C-axis via separate servo motor Speed: 0.01 - 60 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Number of driven tools: 14 Power (at 40/20/10% duty cycle): 2.5/3.5/4.7 kW Max. speed: 2000 rpm Z-axis: 1070 mm X-axis: 285 mm Tailstock -Quill diameter 100 mm -Quill stroke 100 mm -Quill mount (DIN 228) MK 6 EQUIPMENT/ACCESSORIES Bwslinjwfrk Ssl Rfsl  Hollow clamping cylinder  C-axis main spindle  Turret drive (14 driven tools)  Tailstock including live center  300 l coolant system, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication system (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: new, Year of construction: 2024, Functionality: fully functional, SIEMENS 840DE control system with 24" touch panel X = 275 mm, Z = 700 mm, Y = +50 / -40 mm Motor spindle up to 4,000 rpm with 65 mm through-bore 16-station BMT45 driven tools Bolsudapioinl Rfjwl CNC tailstock Chip conveyor Glass scale on the X-axis High-pressure pump 15 bar SCHUNK spindle package NCE 260-81 BMT45 tool holder package (rotating and fixed tools) Packaging Free truck loading with crane

Condition: excellent (used), Year of construction: 2008, Good condition Fanuc control Belinswcg S Ssl Rfjwl C axis Tail Stock Ready for delivery.

Condition: repair required (used), Year of construction: 1993, turning diameter 410 / 220 mm turning length 500 mm Bwslinl Rowbi Nwjfel control CNC 532 total power requirement 11,3 kW weight of the machine ca. 3 t dimensions of the machine ca. 3 * 2,2 * 2,2 m Unclear error Presumably INDRAMAT module As a result, parameter loss General basic condition very good 1st hand - from medical technology Only 22,000 switch-on hours

Condition: good (used), Year of construction: 2000, Emco Emcoturn 365-65, Year of manufacture 2000, Siemens 810 D control system, X/Z travel 210/610 mm, 12-station VDI 30 turret, all stations driven, driven tools up to 4,000 rpm, collet chuck, tailstock, Bweliowd E N Sonl Rfjl C-axis 0.001°, spindle speed up to 6,300 rpm, coolant system, chip tray, accessories, Machine has exclusively machined aluminum and brass, Machine is available at short notice.

Condition: good (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: R6CQ2401, turning diameter over cross slide: 360 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 610 mm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Control: Siemens Sinumerik 840 D X-axis travel: 210 mm Z-axis travel: 610 mm Z-axis in rotary axis – resolution: 0.001° Spindle Spindle size: 65 mm diameter Outer spindle diameter of front bearing: 100 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 360 mm Distances and workpiece sizes Distance between main spindle and tailstock: 805 mm Distance between main spindle and counter spindle: 716 mm Max. workpiece size with tailstock: 200 × 520 mm diameter Counter spindle / tailstock Internal taper of counter spindle/tailstock: MK4 Tailstock travel: 500 mm Max. clamping force: 8,000 Nm Feed and Rapid traverse Feed force X/Z-axis: 5,000–7,000 Nm Rapid traverse X-axis: 24 m/min Rapid traverse Z-axis: 24 m/min Rapid traverse: 100 rpm Tool carrier Tool turret: 12-station Tool holder: VDI 30 Driven stations: 12 Speed range of driven tools: 0–4,000 rpm MACHINE DETAILS Dimensions: 4.0 x 2.5 x 2.5 m Weight: 6 t Operating voltage: 400 V Frequency: 50–60 Hz Rated current: 29 A EQUIPMENT - SCHUNK three-jaw chuck with 220 mm diameter Bwolinl Rowd R Nwefjl - Tailstock included - Machine can be transported on a standard truck

Condition: excellent (used), Year of construction: 1990, Control: CNC contouring control including color screen TRAUB TX 8 D TECHNICAL DATA Swing diameter over longitudinal slide: 560 mm Swing diameter over cross slide: 445 mm Turning diameter: 360 mm Turning length: 1000 mm Chuck diameter: 250/315 mm Bwoliewfrhwsnl Rfsl Spindle bore: 80 mm Drive power: 40 kW Speed range: up to 40 - 3150 rpm Tool carrier: Number of turrets: 1 Number of tool holders: 14 Z-axis: 1070 mm X-axis: 285 mm Tailstock: -Quill diameter: 100 mm -Quill stroke: 100 mm EQUIPMENT/ACCESSORIES Hollow clamping cylinder -Tailstock including live center -Coolant system: 300 l, 2-stage pump 1.5/5 bar  Chip conveyor  Central lubrication (with VOGEL piston distributor)  Measuring arm for measuring tools in the work area  Machine light  Three-jaw power chuck ø 250 mm FORKARDT 1512577 including clamping jaws  Mounting elements  Documentation

Condition: like new (used), Year of construction: 2020, operating hours: 400 h, Functionality: fully functional, from company closure as good as new Pinacho STS18-180 lathe with Fagor control and revolver Year of construction 2020 Turning hours 400 Bwjliewdhn Renl Rfol Turning diameter above bed 360 mm Turning diameter above slide 190 mm Center length 1000 mm Turning length 840 mm Spindel through 42 mm Weight 2500 kg equipped with 3-jaw chuck, 8-fold revolver, Fagor control price excluding VAT, loaded on truck

Condition: ready for operation (used), Year of construction: 2003, operating hours: 2,876 h, Functionality: fully functional, turning length: 750 mm, turning diameter: 320 mm, spindle speed (max.): 3,550 rpm, controller manufacturer: Siemens, TECHNICAL DETAILS Turning diameter: 320 mm Turning length: 750 mm Diameter – standard tool over support: 150 mm Cross travel: 185 mm Spindle bore: 52 mm Control: Siemens Spindle and drive Speed: 14–3,550 rpm Gear ratios: 2 Quill stroke: 120 mm Rapid stroke: 6 m/min MACHINE DETAILS Space requirement: approx. 2,600 x 1,440 x 1,440 mm Machine weight: approx. 2,000 kg Bwjlinlewd Rw Is Rfsl Spindle hours: 2,876 h (machine originates from a training workshop) Total power requirement: 10 kW

Condition: used, Year of construction: 1996, Functionality: fully functional, CNC Lathe TOPPER TONGTAI TNL-100TL Fanuc O-T Series With tailstock and conveyor Year 1996 Supplied with tools documentation Belinlsv Hctne Rfjwl In good working order