Used CNC lathes up to 199mm turning diameter for sale (156)

Condition: good (used), Year of construction: 2015, operating hours: 5,381 h, Functionality: fully functional, machine/vehicle number: AS0211, total height: 2,400 mm, total length: 4,500 mm, total width: 2,400 mm, overall weight: 9,000 kg, controller manufacturer: FANUC, controller model: SERIES 31 i-MODEL A, Equipment: documentation/manual, Technical specifications: - Operating voltage: 400 V - Frequency: 50–60 Hz - Rated current: 80 A - Control system: FANUC SERIES 31 i-MODEL A Travel ranges: - X1 / X2 axes: 180 mm each - Y1 axis: ±45 mm - Z1 axis: 704 mm - Z2 axis: 620 mm - E2 axis: 720 mm - Rapid traverse X/Y/Z axes: 30 m/min Spindle 1: - Max. speed: 5,000 rpm - Spindle nose: A6k - Spindle bore: 65 mm - Bore in clamping cylinder: 65 mm - Chuck diameter: 210 mm - Drive power: 24 kW Spindle 2: - Max. speed: 7,000 rpm - Spindle nose: Ø 110 mm - Spindle bore: 42 mm - Bore in clamping cylinder: 42 mm - Chuck diameter: 140 mm Beb E T N Hjv Uh Ndeyowl - Max. chuck jaw weight: 1.25 kg - Output power: 16.5 kW Tool carrier: - 1x 10-station tool turret - 1x 12-station tool turret - All stations driven (12 stations each) - Max. speed of driven tools: 8,000 rpm Accessories: - Chip conveyor from KNOLL - Tool holders (as shown in the photos, included)

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Bwjb Eovi Ifze T N Hysl Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Spindle speed: Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: X-axis: 480 mm Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Condition: excellent (used), Year of construction: 2020, Maximum cutting diameter 150mm, spindle bore 31.75mm, distance between centre 457mm, Bwsb E Towcp E Uj N Hyol swing over carriage 230mm, swing 280mm, spindle speed 50-4000rpm, spindle power 3Hp, Compound slide travel 76mm, cross travel 152mm, 3 & 4 jaw chucks, fixed steady, digital screwcutting, taper turning attachment , coolant.

Condition: good (used), Year of construction: 2011, Functionality: fully functional, Fanuc control, 52mm spindle bore, two turrets, Y-axis, counter spindle, chip conveyor, tool eye, non-emulsion cutting oil. Bjbowfw Sho E T N Hyowl

Condition: good (used), Year of construction: 2011, Functionality: fully functional, CNC Turning Center with Bar Loader Manufacturer: Miyano Type: ABX-64SYY Year of Manufacture: 2011/06 Bjb E Towdh U Ro N Hyjwl Control: Fanuc 31i-B Technical Specifications: Workpiece Length SP1/SP2: 118mm / 125mm Bar Diameter: 64mm Turning Diameter: 165mm Number of Turrets: 2 Speed: 6,000 rpm Machine Weight: 11,000kg

Condition: good (used), Year of construction: 2007, - SIEMENS 849 D control unit - Bar capacity 65 mm - Main and counter spindle with speed 5,000 1/min - C-axis, Y-axis - 3 turrets with 12 stations each (all driven) - Speed of driven tools 4,000 1/min Bob E Tjuw Izvo N Hyjwl TRAVEL X1= 165, Z1= 220 mm X2= 165, Z2= 150 mm X3= 165, Z3= 650, Y3= 80 (+50/-30) mm ACCESSORIES Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: used, Year of construction: 2007, turning length: 600 mm, turning diameter: 140 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 1 rpm, travel distance X-axis: 110 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 360 mm, total height: 2,810 mm, overall weight: 6,500 kg, bar passage: 65 mm, bar diameter: 65 mm, controller manufacturer: SIEMENS, controller model: 840 D POWER LINE, number of spindles: 2, space requirement length: 6,100 mm, space requirement width: 1,690 mm, CONTROLS .. CNC controls SIEMENS 840 D POWER LINE BASIC FUNCTIONS .. number of spindles: 2 .. number of turrets: 3 .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 3 .. number of b-axes: 3 WORKING RANGE TURNING .. turning diameter (max): 140 mm .. bar diameter (max): 65 mm .. worpiece length max.: 600 mm MAIN SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min COUNTER SPINDLE .. spindle revolutions (min): 1 /min .. spindle revolutions (max): 5000 /min .. Z-axis travel: 600 mm X/Z SLIDE .. Z-axis travel: 360 mm .. X-axis travel: 110 mm .. Y-axis travel: 70 mm .. rotating range B-axis up to: 1 ° .. rapid traverse Z: 45 mm/min .. rapid traverse X: 25 mm/min .. rapid traverse Y: 12 mm/min .. number of tool positions (total): 36 .. number of live positions: 36 .. - rotation speeds (max): 6000 /min ELECTRICAL SPECIFICATIONS .. mains power supply: 72 kVA .. mains voltage: 400 V .. mains frequency: 50 Hz Bsb E T N Howc Sxqsyewl DIMENSIONS / WEIGHTS .. space requirements -left/right-: 6100 mm .. space requirements -front/back-: 1690 mm .. total height: 2810 mm .. total weight approx.: 6500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes .. through spindle coolant attachment: yes .. European CE standards: yes Including bar loader, Profimat 65.8*270/8 year 2005 loading length 500-3000mm. Spindeleinsatzrohren 16,25,30,40,45,55,60,65mm (multi-channel loading magazine) Including chip conveyor Chucks and tools are not included in the scope of delivery.

Condition: good (used), Year of construction: 2016, CNC-swiss type automatic lathe brand: STAR type: SR-20J type C new in: 2015 equipped with: FANUC 31i - control subspindle Bjb E T Njwcnprs Hyewl driven tools c-axis back working parts conveyor barloader FMB minimag 20

Condition: used, Functionality: fully functional, We offer the following 7 machines in a package: DMG Mori 2-axis universal lathe CTX 510 ecoline V3, built in 2014 DMG Mori 2-axis universal lathe CTX 510 eco V1, built in 2011 DMG 5-axis machining center ecoMill 70, built in 2015 DMG 3-axis vertical machining center DMC 1035 V, built in 2014 Ki-Heung CNC bed-type milling machine KNC-U1000, built in 2009 Ki-Heung CNC bed-type milling machine KNC-U1050, built in 2013 Ki-Heung CNC bed-type milling machine KNC-U1250, built in 2012 Bwobewgc Evj E T N Hyel

Condition: excellent (used), Year of construction: 2021, Functionality: fully functional, Fanuc control, three turrets, three Y-axes, Bwsb Eowft T Uo T N Hyel 61mm spindle bore, counter spindle, chip conveyor, loading magazine included, but not fully functional

Year of construction: 2001, Condition: reconditioned (used), GENERAL Project No: 905398 Quantity: 1 pc. Manufacturer: EMAG Type: VL 3 Control: Fanuc 18i TB Year of Manufacture: 2001/2022 Condition: Retrofitted Machine Shifts approx.: 2-3 shift DESCRIPTION TURNING Max. Swing diameter over bed cover 210 mm Max. Clamping chuck diameter 170 mm Max. speed main spindle 7500 1/min Max. power main spindle at 10-40/100% duty ratio 25/16 kW Max. torque main spindle at 10-40/100% duty ratio 134/85 Nm Spindle diameter in front bearing main spindle 80 mm Spindle flange size main spindle Gr. 5 (DIN 55026) Axis at main spindle unit X/Z Travel in X/Y/Z main spindle unit 400/-/200 mm Max. rapid traverse in X/Y/Z main spindle unit 60/-/30 m/min Feed force X/Y/Z main spindle unit 5000/-/5000 N Linear glass scales main spindle unit X/Z Solid clamping cylinder at main spindle Lower turret No. of stations/driven 12/12 Tool reception in turret VDI 40 Speed tool drive 6000 1/min FURTHER EQUIPMENT Fully enclosed work area Light in working area Oil-/emulsion mist extraction unit Bwsb E T Noiix N Uj Hyel Slat band chain chip conveyor Discharge hight chip conveyor 1250 mm Coolant unit 80 l/min at 7 bar Loop-type part storage conveyor Max. workpiece diameter (27 workpieces with 30-85 mm or 18 workpieces with 30-130 mm) mm Max. workpiece length 100 mm Automatic central oil lubrication GENERAL TECHNICAL DATA Operating voltage 400/50 V/Hz Total power requirement 28 kVA Machine dimensions (LxWxH) approx. 2500x1900x2300 mm Space requirement of the whole equipement (LxWxH) approx. 3600x1900x2300 mm Machine weight approx. 5500 kg REMARKS We offer a professionally retrofitted machine. All crucial components, like guideways with roller carriages, ball screws, main spindle, bearings in turret and tool drive etc. have been replaced. Please also see attached document. . We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, Details about the Traub TNK 36 (built in 2003) Bweb E Towgpmae N Hysl The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be inspected and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: excellent (used), Year of construction: 2004, Index ABC65 Year of manufacture: 2004 Control: Siemens (840D) C200-4D MAIN SPINDLE - Spindle drive power: 29 [kW] - Spindle speed: 6000 [rpm] - Max. bar diameter: 60 [mm] Minimum C-axis resolution: 0.001 [degrees] SYNCHRONE SPINDLE - Spindle drive power: 4.2 [kW] - Spindle speed: 4500 [rpm] Bwob Eewgch Rs T N Hyjl - Minimum C-axis resolution: 7.5 [degrees] Travel range: 280 [mm] BACK DRILLING STATION - Number of positions: 5, including 2 with drive Tool type: VDI25 TURRET 1 - Number of positions: 8 - Number of motorized positions: 8 - Travel range X/Z: 90/280 [mm] - Tool type: VDI25 - Driven tool speed: 4500 [rpm] - Driven tool power: 4.2 [kW] TURRET 2 - Number of positions: 6 - Travel X/Z: 81/80 [mm] - Driven tool speed: 4500 [rpm] - Driven tool power: 4.2 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] Accessories: FMB Turbo bar feeder Various material channels Chip conveyor Coolant tank High-pressure pump 5 back-bore stations (without drive) Main spindle with Hainbuch 65 mm chuck Syncro spindle with Hainbuch 42 mm chuck Tool package: Basic equipment on Haltern     The machine is powered and in production.

Condition: good (used), Year of construction: 2008, CNC Swiss-Type Automatic Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2008 with: FANUC 18i control Back machining Synchronous spindle Driven tools C-axis Parts conveyor Fire extinguishing system Beb E Tjwcl Tzs N Hyjwl Chip conveyor Oil mist extraction FMB TURBO 3-36 bar feeder

Condition: good (used), Parts shown by hand not come. Technical details shown on picture. Bweb E T Nowb Epts Hyol

Condition: excellent (used), Traub CNC Lathe Type TND 160 CNC Control TX 8 F Center height 180 mm Bed travel 360 mm Slide travel 180 mm Aperture 42 mm Bwsb E Towa N Rre N Hysl Chuck diameter 140 mm 8-station turret Tailstock

Condition: good (used), Year of construction: 2004, Serial No. 7041117, TX8i control system, 7 axes, 2x 10-station tool turrets, 2x C-axis, 1x Y-axis, driven tool stations, bar loading magazine, make FMB, type Turbo 10-72XT / 3,200 mm, max. bar diameter 72 mm, max. bar length 3,200 mm, chip conveyor, make KNOLL, type 240 S-1/50, coolant system - subject to prior sale - +++ Attention: Machine is part of an online auction! +++ Bweb E T Njway S Hs Hyel

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, Details about the Traub TNK 36 (built in 2002) The machine is in working order and is fully equipped: • Various tool holders • Collets • Guide channels for the bar feeder Beb E T Nswgpl Nj Hyjwl The following CNC lathes are for sale: • Traub TNL 32-7, built in 2014 • Traub TNK 36, built in 2002 • Traub TNK 36, built in 2003 All machines can be viewed and tested live in 79115 Freiburg, Germany. If you are interested or have any questions, please feel free to contact me – I can send you further pictures or documentation upon request.

Condition: used, Year of construction: 2011, Technical details: turning diameter: 80 mm turning length: 235 mm max. bar capacity: 42 mm power capacity - driven tools: 1 kW speeds spindle 1: 6000 1/min speeds spindle 2: 5000 1/min numbers of turret head positions: 8 pos drive capacity - spindle motor: SP1 11 / SP2 5,5 kW Tools speed: 60-6000 1/min weight of the machine ca.: ca. 3 t dimensions of the machine ca.: 2,4 x 1,5 x 1,6 m High Performance CNC Turning- and Milling Center - chipconveyor - subspindle - live tools - C-axis - brake - partscatcher and partsconveyor - tool eye - barloader LNS HYDROBAR MINI-SPRINT Bwjbjtpb T Ho E T N Hysl approx. 5000 working hours *

Condition: good (used), Year of construction: 2007, CNC Swiss-Type Lathe Make: STAR Type: SR-20R II Year of Manufacture: 2007 with: FANUC 18i Control Back-End Machining Synchronous Spindle Driven Tools Bjb Eswcl The T N Hyewl C-Axis Parts Conveyor Fire Extinguishing System Chip Conveyor Oil Mist Extraction FMB TURBO 3-36 Bar Loading Magazine

Condition: good (used), Parts shown by hand not come. Bwsb E T N Hewb Em Seysl Technical data shown on picture.

Condition: excellent (used), Year of construction: 2010, MAZAK QUICK TURN SMART 100S Max. machining diameter: 280 mm Bweb Ejv Epn Ae T N Hyjl Max. machining length: 309 mm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - Mazatrol Smart CNC control - SMW 173E collet chuck - Tool Eye - Bar loader interface - Automatic parts catcher - NC tailstock - Reinforced coolant pump - Various tool holders for 12-station turret

Condition: new, Year of construction: 2024, operating hours: 25 h, machine/vehicle number: AT1395, SPINNER TC600 with travel X=275mm Z=700mm in 45-degree inclined bed design with hardened and ground slideways equipped as a SINGLE-SPINDLE TURNING MACHINE with turret WITH driven tools WITH Y-axis indexing turret - WITH driven tool stations all tool stations can be driven, servo turret Swivel speed adjustable Tool holder on turret system BMT45 Number of tool stations in the turret : 16 SPINDEL 1 in version up to 4,000 rpm - 65mm As integrated motor spindle, with water cooling with hydraulic hollow clamping cylinder, bar capacity 65mm, speed range 0-4,000 rpm , Pmax 34 kW / 325Nm POWER CHUCK make SMW-Autoblok D=250mm 3-jaw, model BHD Set of soft jaws, set of hardened UPPER JAWS FOOT SWITCH CNC-REITSTOCK with integrated bearing as CNC axis movable in axis to main spindle. Programmable contact pressure. FOOT SWITCH for moving the tailstock quill in insertion mode DIRECT MEASURING SYSTEM in X-axis CONTROL FANUC 32iTB with the following basic functions: - Contouring control with Fanuc standard user interface - 15" LCD flat color screen Fanuc control panel, full-key - User memory 256 KByte, max. 64 program numbers - USB interface for loading/saving CNC programs - Ethernet interface - GE Fanuc "turning" cycles for threading, deep drilling, parting off, grooving, - Contour train programming, cutting edge radius compensation, chamfering and corner rounding - Zero offsets G54-59, 64 tool compensation pairs, V-constant - Thread cutting without compensation chuck for central threads in the spindle center and for driven tools. - In the case of the C axis: Polar coordinates and cylinder interpolation - Parallel programming in the background - Dialog interface for simple cycle assignment and contour programming incl. Line graphics - Inch-metric changeover - Electronic handwheel integrated in the control panel - Dialog language for control trilingual German/English/French FIRST LANGUAGE CNC dialog: German DIALOG PROGRAMMING Fanuc Manual-Guide i SIGNAL LAMP at the top of the machine in three colors red/yellow/green as status display LATE CONVEYOR as hinged belt conveyor exiting to the right, incl. integrated coolant tank and feed pump OIL SKIMMER integrated in coolant system Flushing gun MESSTASTER for tool measurement in the work area STANDARD DOCUMENTATION GERMAN consisting of machine manual and CNC manuals supplied in digital form on the control unit. STANDARD PAINTING two-colored in light grey RAL7035 and blue grey RAL5008 Electrical version EUROPA-STANDARD as follows: Bob E T Nori I H Ie Hyewl Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN mains (5-wire) Remarks: The price includes warranty services only within Germany. For new and demo machines, the pictures are not necessarily the pictures of the individual machine but of comparison machines The accessories shown, such as clamping devices or tool holders, are only included in the scope of delivery to the extent listed in the technical description. Ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. GGF we have other offers of comparable machines. We expressly reserve the right to prior sale.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning diameter: 65 mm, The machine is new and in stock. STANDARD EQUIPMENT Main spindle 15 kW, 3,500 rpm with SINUMERIK 840D control system with 4 cross-slides on the main spindle with an 8-station VDI30x55 servo turret all stations suitable for red machining. Tool holder Central milling drive 3.3 kW, 3000 rpm Including stable polygon turning function (without tool holder) With full C-axis on the left spindle and on the pick-up spindle Including pick-up spindle With workpiece collecting tray and finished part conveyor belt for falling cut-off parts or offcuts With retractable finished part conveyor belt for unloading finished parts after back machining 4 tool holders for the back With programmable high-pressure coolant for clamping device cleaning before the next workpiece transfer With HD-KM pumps, 70 bar With separate coolant tank (180 liters) Bweb E T Nev N I Hxe Hysl With handwheel Coolant and hydraulic pumps Bar loader interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring on all stations Control cabinet with air conditioning unit Triple signal lights The machine is also equipped with a turret Equipped for back machining. This is designed for fixed tools only. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming document for Lico machines Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Condition: new, Year of construction: 2023, Functionality: fully functional, turning diameter: 65 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 3.500 rpm with SINUMERIK 840D control system with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Bwsb E T Nsug Uqgj Hysl Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray