Used CNC lathes 300-349mm turning diameter for sale (127)

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 Gkolhccqjwwaruskea tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm Gkolov Nw Npjhccqkea quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2001, Technical data: Okuma Space Turn LB 300 MY Year of manufacture: 2001 Control: OSP U 100 L Max. Turning length: 340 mm Chuck diameter: 10 inch X-axis: 280 mm Y-axis: 120 mm Z-axis: 500 mm C-axis: 360°(0.0001°) Spindle: 4500 rpm Golhcequcnbocqkjka Spindle clearance: 62 mm Weight: 6000 kg Accessories: -Driven tools -Chip conveyor -Transformer -Manuals

Condition: good (used), Year of construction: 2012, operating hours: 7,360 h, Doosan Lynx 220B CNC Slant Bed Lathe With Doosan-Fanuc I Series Control Gslszt R U Nohccqkoka With Ø135mm Collet Chuck. Maximum Swing Ø510mm. Maximum Swing Over Cross Slide Ø290mm. Maximum Turning Ø320mm. Maximum Turning Length 305mm. Bar Capacity Ø51mm. Axis Travel 'X'=175mm, 'Z'=330mm. Rapid Feedrates 'X'=30m/min, 'Z'=36m/min. Spindle Nose A2-6. Maximum Spindle Speed 5,000rpm (15kW Motor). Spindle Nose A2-6. Spindle Through Bore Ø61mm. 12 Station Turret. Tailstock Quill Ø80mm, Quill Travel 80mm, Taper MT4. Tool Shank 25 x 25mm. Boring Bar Sleeve Ø40mm. S/No. ML0014-005414 (2012). Low Running Hours 7,360. With Coolant System, Tool Setter, Parts Catcher, Seoam CAH-08 3 Jaw Power Chuck, Tailstock, Foot Switch, Quantity Of Assorted Hard/Soft Jaws & Manuals. Approx Dimensions L2,325 x W1,600 x H1,600mm. Weight 2,900kg.

Condition: good (used), Year of construction: 2000, functionality: fully functional, Technical details turning diameter 420 mm turning length 650 mm control Okuma OSP-U100L spindle bore 95 mm spindle turning speed range 2800 U/min travel -x axis 300 mm travel -z axis 675 mm main drive motor 22/30 kW weight of the machine ca. 5,5 t dimensions of the machine ca. 2700 x 1900 x 1885 mm Additional information First put into operation 2001. - 12-station turret (VDI 40) with driven tool stations, 3,000 rpm, 5.5 kW Gkelezr Hyfjhccqkoa - Internal extraction system by Hengst Filtration (year of manufacture 2023) - Touchsetter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock - Coolant supply, also through the tool - IGF dialog programming - Chip conveyor

Condition: good (used), Year of construction: 2000, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 1,000 mm, turning diameter: 330 mm, spindle bore: 40 mm, spindle speed (max.): 3,500 rpm, spindle motor power: 7 W, Equipment: documentation/manual, Year of manufacture: 2000 Turning length: 1000 mm Gslhoxd Aigeccqkoka Swing diameter over bed: 330 mm Swing diameter over cross slide: 210 mm Distance between centres: 1000 mm Control type: FANUC Spindle nose: Camlock D1-4 Spindle bore: 40 mm Max. spindle speed: 3,500 rpm Spindle motor power: 7.5 kW Dimensions (L x W x H): 2100.0 × 1200.0 × 1600.0 mm Weight: 1200 kg

Condition: good (used), Year of construction: 2005, turning length: 200 mm, turning diameter: 350 mm, Used Mazak Multiplex 6300 Max turning diameter approx. Ø 350 mm Max turning length approx. 200 mm Many fine tools included "Auto operation" hours: 76,300 Gkslhcoy I Sfuscqksa Gantry loader max. 2 x 40 kg 2 spindles, 2 axes per spindle (X/Z), C-axis, M-spindle Portal load and unload table

Condition: good (used), Year of construction: 2008, turning length: 200 mm, turning diameter: 349 mm, Used Mazak Multiplex 6300Y CNC lathe Max turning diameter approx. 350 mm Max turning length approx. 200 mm Gkeloyvgbxjhccqkoa Gantry loader max 2 x 40 kilograms 2 spindles, 3 axes per spindle + Y axis, C axis + M spindle Gantry loader, loading magazine, discharge conveyor

Condition: used, BIGLIA B 470/YSM is a CNC turning lathe engineered for precision machining, delivering high accuracy and reliable performance. Capacities: turning diameter 210 mm, bar diameter 65 mm, turning length 300 mm, Y axis 110 mm; two turret slides (2) with 12 positions each and 12 driven tools per turret. Key specifications: max speed 4000 t/min; power of back spindle 11 kW; spindle motor 26 kW; voltage 50 Hz 3x 400 Volt; machine weight about 6150 kg; time under power 74536 Heures, operating time 24651 Heures, working time 8588 Heures. Accessories: bar feeder LNS HYDROBAR SPRINT. Capable of achieving tight tolerances; suitable for automotive, aerospace, medical, watchmaking and machine tool industries Gjlhcjzqbh Iecqkeka

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 142967, turning diameter over cross slide: 300 mm, spindle speed (max.): 5,000 rpm, rapid traverse X-axis: 30 m/min, feed rate X-axis: 5 m/min, controller model: Mazatrol PC Fusion CNC 640T, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Gelhcezpxgxocqkska Working area Maximum turning diameter: 300 mm Maximum swing diameter: 525 mm Maximum swing diameter over the slide: 350 mm Maximum bar diameter: 51 mm Main spindle Speed range: 35 – 4,000 rpm Drive power: 15 kW Maximum torque: 350 Nm Spindle nose: A2-6 Spindle bore: 61 mm C-axis positioning: 0–360° / 0.001° Counter spindle Speed range: 35 – 5,000 rpm Drive power: 7.5 kW Maximum torque: 57 Nm Indexing: 72 positions / 5° Tool turret Number of tool stations: 12 Equipment: Stationary and driven tools Turret indexing time to station 1: approx. 0.2 s Driven tools Drive power: 3.7 kW Maximum torque: 35 Nm Speed range: 25–4,500 rpm Travel ranges X-axis travel: 190 mm Z-axis travel: 575 mm B-axis travel: 585 mm Rapid traverse rates Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse B-axis: 18 m/min Feed ranges Feed X-/Z-axis: 0–5,000 mm/min Feed C-axis: 1–2,000 rpm MACHINE DETAILS Control system: Mazatrol PC Fusion CNC 640T EQUIPMENT Counter spindle Bar feeder

Condition: used, Year of construction: 2000, functionality: fully functional, CNC turning center SPACE TURN Serial number 0932 6 axes Turret with 12-position tool changer Travel distances: X-axis: 280 mm Z-axis: 1000 mm Golhccoztp E Hjqkjka CNC control: OKUMA OSP-U10 Including chip conveyor ENOMOTO Model PA-00040 Year of manufacture: 2015

Condition: used, Year of construction: 2018, functionality: fully functional, Doosan CNC lathe, Doosan Lynx 2100 LMS Year of manufacture: 2018, 3200 kg Equipped with IEMCA Boss 552-HD bar feeder, year of manufacture: 2018 Gkjlhcszudmuocqksa Location: Bad Tölz Inspection is welcome. We have more used machines available. Please contact us.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 4 MAIN SPINDLE - Spindle nose : A2-8 - Spindle speeds : 3000 [rpm] - Max. bar diameter : 80 [mm] - Max. turning diameter : 300 [mm] - Max. diameter on bench : 520 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle speeds : 6000 [rpm] - Max. bar diameter : 53 [mm] - C axis indexing precision : 0.001 [°] - Travel : 520 [mm] TURRET - Number of positions : 12 - X/Z stroke : 230 / 460 [mm] - Live tools speed : 4500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 22.5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3050 x 1860 [mm] - Machine height : 1.850 [mm] - Machine weight : 5500 [kg] EQUIPMENT - CNC : OSP-P300L-R - Coolant tank * with high-pressure pump - Chips conveyor - Parts catcher - Parts conveying strip - Bar loader : Top Automation FU352 Gslhjuhbnnsccqkska - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, Harrison Alpha 1350XS CNC Toolroom Lathe (2010) Swing Over Bed 350 mm Swing Over Cross Slide 196 mm Swing in Gap 535 mm Distance Between Centres 650 mm Maximum Turning Diameter 350 mm Spindle Speed Range 1 – 3,500 rpm Fanuc Oi-TD CNC control Harrison Alpha conversational programming Fanuc Manual Guide i Full ISO G-code programming capability 2-axis CNC control (X and Z) Gkjlhccqjzq Ddxskea Electronic handwheel operation Machine Weight Approx. 1,800 kg Machine Dimensions (L × W × H) 2,400 × 1,700 × 1,500 mm

Condition: like new (used), Year of construction: 2022, operating hours: 521 h, functionality: fully functional, machine/vehicle number: L3M0474, turning length: 500 mm, turning diameter: 300 mm, total height: 2,210 mm, total length: 3,950 mm, total width: 2,260 mm, overall weight: 5,680 kg, Equipment: documentation/manual, used Okuma lathe As-new, well-maintained condition 521 operating hours Gjlsy Rx Tdjhccqkska 347 spindle hours

Condition: ready for operation (used), Year of construction: 1989, turning diameter over cross slide: 340 mm, turning length: 560 mm, turning diameter: 560 mm, spindle bore: 63 mm, overall weight: 5,500 kg, Fanuc OT Gkolozbam Eehccqksa Length capacity: 560 mm Diameter over slide: 340 mm, turning diameter: 560 mm Turret: 10 stations Spindle: 11 kW Chip conveyor

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, The machine can be inspected with a lead time of three days. TECHNICAL DETAILS Turning diameter max.: approx. 300 mm Turning length max.: approx. 300 mm Spindle bore diameter: approx. 52 mm Main spindle speed max.: 4,500 rpm Tool turret: 12 stations Gkolhcjznb Ntjcqksa Repeatability: 0.003 mm MACHINE DETAILS Control: FANUC CNC Machine weight: approx. 2,200 kg Operating hours: approx. 6,458 h Spindle hours: approx. 4,300 h Voltage: AC 380 V (with or without transformer) Rated power: 14.97 kVA Full load current: 22.74 A Interrupting capacity: 5 kA Short-circuit capacity: 10 kA Power of the electric motor according to the manufacturer: 7.5 kW EQUIPMENT Technical documentation Powerful main spindle Robust machine construction for high dimensional accuracy Tool turret with rapid indexing Compact design with low space requirements User-friendly CNC control High reliability Low maintenance requirements Complete technical documentation

Condition: excellent (used), Year of construction: 2010, Spinner Tc400 52mc CNC turning machine Year of manufacture: 2010 Control system: Siemens 840D SolutionLine Turning length: 550 mm Turning diameter: 280 mm Spindle speed (max.): 5,000 rpm Travel in X-axis: 200 mm Travel in Z-axis: 515 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Z-axis: 24 m/min Overall height: 1,800 mm Overall length: 2,100 mm Overall width: 1,350 mm Gelhccszua Etjqkoka Quill travel: 500 mm Quill diameter: 60 mm Quill stroke: 125 mm Total weight: 4,000 kg Chuck outer diameter: 225 mm Equipment: Chip conveyor Automatic door

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Gkslhcey Drunscqkja Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: used, Year of construction: 1999, functionality: fully functional, turning length: 497 mm, turning diameter: 300 mm, travel distance X-axis: 180 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, Mazatrol PC Fusion CNC 640T CNC control 3-jaw chuck 12-fold revolver C-axis Golhszmd Tloccqkjka driven tools Y-axis tool presetting device (tool eye) tail stock chip conveyor coolant device bar loading device for 3m bars 14 fixed tool holders 8 driven tool holders Technische Daten: / technical details max. Drehdurchmesser / max. turning diameter 300 mm max. Schwingdurchmesser / max rotary diameter 525 mm max. Drehlänge / max. turning length 497 mm Drehzahl / spindle speed 35-4000 UpM/ rpm Anzahl der Revolverplätze / numbers of tool places 12 X-Verfahrweg / x-travel 180 mm Z-Verfahrweg / z-travel 575 mm Y-Verfahrweg / y-travel +-50 mm Futterdurchlass / spindle hole diameter 62 mm Eilganggeschwindigkeit X, Z / rapid feed X, Z 30, 30 m/min. Gewicht der Maschine ca. / weight ca. 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2002, turning diameter 300 mm turning length . mm control Mazatrol 640 T x-travel 190 mm y-travel 1000 mm z-travel 575 mm turning speeds 4000 U/min feed 30 m/min number of tools 12 bar loader nein total power requirement 18,5 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 5600x2100x2200 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Gslhccjzdu Stsqkska Your Markus Hirsch Team

Condition: good (used), Year of construction: 1999, Swing diameter: 630 mm over the bed and 290 mm over the cross slide Spindle speed range: 8 - 3,000 rpm Gkjlozl Tlnshccqkja Drive power: 28 kW Machine weight: 5,000 kg

Condition: good (used), Year of construction: 2014, 1 used 1 CNC turning machine Manufacturer: Saeilo Contour Model: ACE-15MC Gslhjvzkw Rjccqkoka Type: LT-2XL500M Year of manufacture: 2014 with Sinumerik 828D BASIC T control system Technical data: Max. turning diameter: 270 mm Max. turning length: 425 mm Bar diameter: 51 mm Spindle speed: 5000 rpm Number of tool positions: 12 Tool holder: VDI 30 Main drive power: 12/18 kW Travel distances X/Z axis: 183/500 mm Dimensions L x W x H without chip conveyor: 2600 x 2100 x 1800 mm Machine weight (net): approx. 4000 kg Equipment: Powered tools C axis

Condition: used, Year of construction: 2011, Lathes Travel distance X: 270 mm Travel distance Y :120 mm Travel distance Z: 1200 mm turning length: 1135 mm max. turning diameter: 700 mm max. circulation diameter: 340 mm max. turning moment: 680 NM range of revolutions till: 4000 rpm Control: DMG powered tools Powered tools: 50 Scrapper chip conveyor Short bar loader magazine IRCO ILS-RBK 100/16 Various main spindle reduction sleeves NC-controlled workpiece removal device Gelhswwv Ifeccqkoka Conveyor belt for transporting the workpieces out of the machine Coolant system 8/20 bar with immersion cooler Coolant spray gun Chip conveyor Oil mist extraction system Control cabinet cooling unit (up to 40 °C) 4-color signal light, connection for bar loader magazine Main spindle as integrated spindle motor ISM 102 Counter spindle as integrated spindle motor ISM 76 Easy-Tool Monitor Approx. 40 various quick-change collets size 100 (entire stock) Pneumatic changeover device Ø 100 mm Approx. 50 various tool holders, static and driven (entire stock) Installation elements Documentation

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 350 mm, turning diameter: 360 mm, spindle motor power: 5,500 W, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,000 mm, total length: 2,280 mm, total width: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Special Offer – 5% Off! MTP CK6132 CNC 320 LATHE – SIEMENS 828D The MTP CK6132 CNC 320 is a compact and versatile lathe designed for the precise machining of metal components. It performs cylindrical, tapered, internal and external turning, as well as threading, facing, grooving and parting operations. The machine is equipped with an industrial Siemens 828D CNC control featuring a multilingual user interface configured according to the customer’s requirements. The control supports shop-floor and conversational programming as well as 3D machining simulation. It simplifies program preparation, process monitoring and daily operation. The solid cast-iron bed provides stability, vibration resistance and high repeatability. A fully enclosed working area, coolant system, automatic lubrication and working light improve operator safety and comfort. KEY FEATURES Siemens 828D CNC control Multilingual interface configured to customer requirements Shop-floor and conversational programming 3D machining simulation 160 mm hydraulic three-jaw chuck Gelhcoytrnrocqkoka Six-position tool turret Automatic tool-setting probe Automatic central lubrication system Tool coolant system Fully enclosed working area Working and warning lights TECHNICAL SPECIFICATIONS Maximum turning diameter over bed: 320 mm Maximum turning diameter over cross slide: 110 mm Chuck diameter: 160 mm Spindle bore: 48 mm Spindle nose: A2-5 Maximum spindle speed: 3000 rpm Main motor power: 3.7 kW Tool turret: 6 positions X-axis travel: 350 mm Z-axis travel: 350 mm Rapid traverse X/Z: 8/10 m/min Tailstock quill taper: MT4 Tailstock quill travel: 100 mm Tailstock quill diameter: 52 mm Machine dimensions: 1600 x 1100 x 1680 mm Machine weight: 1000 kg TRANSPORT We arrange machine delivery throughout Europe. Transport costs are quoted individually according to the destination and specific shipping requirements. Collection from our warehouse in Sokołów Podlaski, Poland, is also available. Please contact our sales department for a transport quotation. The MTP CK6132 CNC 320 is suitable for manufacturing plants, toolrooms, workshops, maintenance departments and technical training centres.