Used Center lathes 400-499mm turning diameter over bed for sale (166)

BULMAK / ZMM CU400/1000

Call

Condition: new, turning diameter 440 mm turning length 1000 mm swing diameter over bed slide 210 mm Swingdiameter in the bed bridge 620 mm centre height 210 mm reus 21 (20 - 2000) U/min tail stock MK5 quill stroke 180 mm diameter of quill 70 mm spindle taper DIN 55027 Nr. 8 spindle bore 62 mm feed längs 0,04 - 12 m/min feed quer 0,02 - 6 m/min total power requirement 7,5 kW weight of the machine ca. 2250 kg dimensions of the machine ca. 2450 x 980 x 1330 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection L9nq08nk2b - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

more

Listing

Halberstadt

7,855 km

Lead screw lathe

HEIDENREICH & HARBECK Hanseat 480

Call

Condition: used, Year of construction: 1981, Ref. -No.: 10257 Manufacturer: HEIDENREICH & HARBECK Type: Hanseat 480 Year of construction: 1981 Type of control: Konventionell Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 80-0512-0562 Turning Speeds: 20-2000 RPM Tool holder type: Multifix Typ B Turning Length: 1.000 mm Turning Diameter Over Bed: 480 mm Turning Diameter Over Slide Rest: 295 mm Bezel diameter (inside): 1 x 145, 1 x 255 mm Machine length: 2.900 mm Machine width: 1.200 mm Machine Height: 1.800 mm Weight Of The Machine Ca.: 3,5 t Bioa9ukjtru

more

Listing

KNUTH Werkzeugmaschinen Turnado 230x1000

Wasbek

7,654 km

Conventional lathe

KNUTH Werkzeugmaschinen Turnado 230x1000

€13,400

Call

Condition: good (used), Proven classic with extensive standard equipment and powerful motor Seqxnvffk Our complete data sheet with all details and technical data can be found here under Documents as a PDF download.

more

Listing

Goldenstedt

7,653 km

Mondiale Gallic 400

Call

Condition: used, turning diameter over bed 400 mm turning diameter over slide rest 220 mm turning length 1000 mm centre height 200 mm bed width 340 mm spindle bore 68 mm tailstock taper MT 4 diameter of quill 65 mm number of speeds 16 spindle turning speed range 40-2000 U/min 2rnk383y digital readout neu, 2-Achsen 3-jaw chuck Ø 250 mm weight of the machine ca. 1800 kg dimensions ca. 2500 x 1000 x 1500 mm

more

Listing

Schijndel

7,555 km

Lathe

Sunmaster FC-1860V

Call

Condition: new, Year of construction: 2023, 462 x 1500 mm, 80 mm clearance Constant variable cutting speed Fixed goggles Travelling goggles Cooling MT5 Center Bffdw7mnzrg Standard machine tools Manual and spare parts list 3 claws 10" with soft jaws Multifix quick-change toolholder 2-axis digital display FAGOR Spindle brake LED machine lamp

more

Listing

Erwitte

7,719 km

Conventional lathes

Optimum OPTIturn TZ4

Call

Condition: new, Year of construction: 2022, machine/vehicle number: 3432240, Functionality: fully functional, drive power: 4,5 spindle hole: 52 Spindle speed: 5-1800 Center height: 200 Bv0kfbgmin distance between centers: 800 Available from stock industrial design TECHNICAL SPECIFICATIONS Center height 200 mm Distance between centers 800 mm swing diameter Machine bed 400 mm Spindle speeds 16 levels 5 - 1800 rpm Spindle bore 52 mm Feed range longitudinal 0.026 - 1.84 mm/rev / 48 steps Thread cutting metric 0.2 - 14 mm/rev / 26 pitches Power of the drive motor 3 / 4.5 KW scope of delivery fixed bezel 10-130 mm moving bezel 10-100 mm Quick change tool holder 5-B Steel holder 25x120 type D square chisel 20 mm Adapter MK6-MK3 non-moving center MK3 non-moving, but temperature-resistant center point MK3 Initial filling of the machine with quality oil operating tool Further technical data and description can be found in the appendix

more

Listing

Niederlangen

7,585 km

Metal lathe turning machine Colchester 450x2000mm

BULMAK / ZMM C10TM/3000

Call

Condition: new, turning diameter 760 mm turning length 3000 mm swing diameter over bed slide 520 mm centre height 380 mm reus 17 (7,5 - 1015) U/min tail stock MK6 Qzyjdoc8 quill stroke 225 mm diameter of quill 105 mm spindle bore 132 mm feed längs 0,039 - 18 mm/min feed quer 0,02 - 9 mm/min total power requirement 15 kW weight of the machine ca. 4700 kg dimensions of the machine ca. 4900 x 1650 x 1650 mm - Coolant device - Machine light - Chip back wall - Spindle protection - Lathe chuck protection - Tool holder protection - Interchangeable gears *Special equipment - 3-jaw chuck Ø 250 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type B, including 4 tool holders - 3-axis digital display DRO Newall - Foot pedal with brake function CE

more

Listing

Wijchen

(dealership location)

7,560 km

Colchester Mascot 1600, 450x2000mm

Call

Condition: used, Lathe, Metal turning machine Model: Conventional Be0vm7bs Manufacturer:&nbsp Colchester Type: Mascot 1600 Turning-diameter: 450mm Turning-diameter&nbsp gapbed: 700mm Spindle-hole: 78mm Centerdistrance: 2000mm Spindle-speed: 20-1600 Incl. Sonydigital readout Machine-dimensions: 3500x1000x1700mm

more

Listing

Bruchsal

7,891 km

WEILER Commodor 230 Teilüberholt

Call

Condition: excellent (used), Year of construction: 1991, Functionality: fully functional, L+Z lathe Weiler Commodor 230 *partially overhauled* Stock number: 04-03-165 Machine data: Year of construction: approx. 1991 L x W x H: approx. 2700 x 1200 x 1800 mm Weight: approx. 1600 kg Machine is in very good used condition Delivery time on request Machine partially overhauled Technical data: Digital display: 3-axis digital display NEW Dimensions: Jp930bcq Max. turning diameter over bed: approx. Ø 475 mm Max. turning diameter over support: approx. Ø 270 mm Max. turning length: approx. 1000 mm Rod passage: approx. Ø 56 mm Spindle: Speed range: approx. 13 – 2000 rpm Spindle nose: A 2 – 6 Drive power: approx. 7.5 kW Automatic longitudinal & plan feeds: Feed range: approx. 0.014 – 1.00 mm/rev Suitable for threads: - Metric 0.30 - 10 mm – Inch 80 – 2 3/4 Gg/” – Diametrically – Pitch thread 80 – 5.5 Dp – Module 0.2 – 5 Tailstock: MK 4 Accesories: -Jaws – chuck Ø 200 mm *New* -Quick-change tool holder + 1 insert *New* -Electric feed protection *New* -Work light -Coolant device -Complete machine documentation -Emergency stop switch -Various tension wrenches -Machine feet -L+Z spindle cover -Drill chuck *optional* -Revolving tip *optional* -Electrical work safety device *optional* -additional quick-change inserts *optional* -Collet chuck device 173E *optional* -Collet chuck set 173E *optional* -Transportation, installation & commissioning *optional* Further accessories on request Price and further technical data on request

more

Listing

Günzburg

8,037 km

VOEST DA 180 / 1

€26,000

EXW ONO plus VAT

Call

Condition: used, Year of construction: 1986, turning diameter over bed 380 mm turning diameter over slide rest 185 mm turning length 800 mm centre height 180 mm bed width 330 mm internal taper -metric 57 mm spindle nose 55027 Gr. 6 turning speed range - spindle 44 - 2000 U/min tailstock quill taper MT 4 spindle bore 52 mm engine output 5,5 kW total wight 0.97 t C9wx3ma Mechanic: normal Optical condition: normal and cleaned The machine can be viewed under current. 02817201 380 V, 50 Hz, colour green accessories: engine brake, chip protection shield, chip protection, Röhm turning chuck for 3-jaws 200 mm, multifix holder B + 2 inserts, punch point revolving and fix, 6 machine feet operating instruction, electrical circuit Machine has been checked in our workshop, including electrical acceptance protocol !

more

Listing

Schijndel

7,555 km

Maxturn ELV-1730

€6,750

Call

spindle bore: 58 mm, turning diameter: 470 mm, turning diameter over bed slide: 470 mm, turning length: 750 mm, Condition: good (used), Year of construction: 2015, Speed 22-2500 rpm. Variable. Dmzac7 Maximum turning diameter 470 mm. Center distance 750 mm. Axle load: 58 mm. Klauwplaat 200 mm. Weight: 1550 kg. bj. 2015 Made in Taiwan

more

Listing

Mögglingen

7,995 km

engine lathe

LÖW SMAC W 490

Call

Condition: good (used), Year of construction: 2001, Turning diameter over bed 490 mm Distance between centers 1500 mm Spindle bore 63 mm Spindle speed 2240 min-1 Chuck diameter 250 mm 2* steady rest tailstock multifix Dz3dny

more

Listing

Niederlangen

7,585 km

OPTIMUM OPTIturn TH4215D

Call

Condition: new, turning diameter 420 mm turning length 1500 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 590 mm centre height 210 mm Turning length in the bed bridge 260 mm reus 16 (45-1800) U/min tail stock MK 4 quill stroke 120 mm diameter of quill 50 mm spindle taper DIN ISO 702-2 Nr. 6 spindle bore 52 mm spindle cone MK 6 feed längs 17 / 0,05 - 1,7 m/min feed plan 17 / 0,025 - 0,85 m/min Ctp7ghza8m total power requirement 4,6 kW weight of the machine ca. 1340 kg dimensions of the machine ca. 2440 x 915 x 1375 mm Fully equipped master and feed spindle lathes. TH 4215 with digital position indicator DPA 21 / 3462070 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 6 - Precisely crafted slide - Hand wheels with adjustable fine scaling 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Adjustment range top slide ± 90° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Main spindle running in oil bath - Smooth-running gear wheels, hardened and ground with 2 adjustable Precision tapered roller bearings - Hand wheels decoupled and tested according to EN 23125 - Two-channel right-left switch tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - All metric pitches in the range 0.2 to 14mm/rev and all Inch threads in the range of 72 - 2 threads per inch without changing the Change gears adjustable by shift lever in the control panel - Clockwise/counterclockwise rotation can be switched on the bed slide via the switching spindle - Central lubrication in bed slide - Meehanite cast base and machine bed in one piece - Lead screw cover - Emergency stop device with foot control - Safety handwheels with snap-out function in the X and Z axes - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and hand wheel with adjustable fine scaling 0.025 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, induction hardened and precision ground cast iron - Coolant device with separate coolant tank with level indicator and oil separator; easy and complete emptying and cleaning according to DIN - LED machine lamp in the chip guard Models TH 4210D and TH 4215D with digital readout DPA21 - User-friendly membrane keyboard, splash-proof, closed andglare-free - Glass scales scope of delivery - Fixed bezel passage Ø 15 - 145 mm - Revolving bezel passage Ø 10 - 75 mm - LED machine light - Reducing sleeve MT 6 / MT 4 - Fixed center MK 4 - Change gear set - Position stop with fine adjustment - Initial filling of the machine with quality oil - Operating tool Incl. special accessory OPTIMUM three-jaw lathe chuck centrically clamping Ø 250 mm Quick change holder SWH5-B set

more

Listing

Unterschleißheim

(dealership location)

8,125 km

TOS GALANTA SUIL40A/1000

Call

Condition: used, Year of construction: 1996, turning diameter over bed 400 mm turning diameter over slide rest 260 mm turning length 1000 mm spindle turning speed range 18x 20 - 3.150 U/min spindle bore 50,80 mm spindle head B5 logitudinal feed 0,010 - 3,240 mm/U cross feed 0,0004 - 0,128 mm/U tailstock quill taper MT 5 quill stroke 150 mm diameter of quill 60 mm tailstock adjustment out of the central pos. +/- 10 ° thread - mm pitch 0,25 - 20 mm thread - module 0,125 - 20 mm thread - inch 1 - 80 inch. main drive motor 4,00 kW total power requirement 6,00 kW weight of the machine ca. 1,90 t dimensions of the machine ca. 2,50 x 1,50 x H1,80 m 9vxjrxahkk Equipped with: - 3-jaw chuck 160mm - 4-jaw chuck 160mm - collet set 2.00 - 24.50mm, in 0.5mm increments - steady - various change gears - traveling splash guard - chuck cover - coolant pump

more

Listing

Spanien

7,597 km

KRAFT DLZ 200x1000

€18,900

Call

Condition: new, turning diameter over bed:402 mm Bp3d9xq7ou turning diameter over slide rest:245 mm turning length:750/1000 mm centre height:200 mm bed width:250 mm max. workpiece weight between centres:280/300 kg :135 kg spindle bore:42 mm spindle turning speed range:40-2300 (3 Getriebestufen) U/min longitudinal feed:0.05-0.752 mm/U cross feed:0.025-0.376 mm/U metrical thread cutting:0.5 - 7,5 mm/U threading WHITWORTH:60-4 TPI range of module thread:0,25-3,75 mm :120-8 mm/min. diameter of quill:58 mm sleeve conus:4 MK quill stroke:180 mm fixed steady::Ø 10-125 (110-200 opt.) mm with live steady:Ø 10-80 mm power requirement:4 kW center morse:2 Stück Brand new Center Lathe KRAFT DLZ 200 Series More information can be found in the appendix

more

Listing

Schwabach

8,026 km

L+Z Lathe ,

Heidenreich + Harbeck , RO 21

Call

Condition: used, . Technical data: Center distance 1000 mm Turning diameter over bed 430 mm Turning diameter over support 260 mm Turning diameter in offset 620 mm Spindle bore 56 mm 24 speeds 19 - 2000 rpm Drive power 5.5 kW . Machine for simple turning work . Bh9mhvehvap .

more

Listing

Ahaus

7,617 km

Lead/traction spindle lathe

BERNARDO Standard 165 V-D

Call

Condition: new, turning length 1000 mm turning diameter 350 mm turning dia. in gap 450 mm spindle bore 40,0 mm turning speeds 70 - 2000 U/min bed width 180 mm spindle taper 55029 D 1-4 taper in tailstock 3 MK quill travel 110 mm total power requirement 1,5 kW weight of the machine ca. 529 kg. range L-W-H 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed bezel - passage diam. max. 60 mm - Live steady rest - passage diam. max. 60 mm Ciqrez287u - clamping disc 250 mm - Quadruple steel holder - Shaft fixing device - Protective device at steel holder - slip clutch - Longitudinal micrometer stop - coolant device - Pull-out chip tray - Frequency converter - Foot pedal with brake function according to CE - bulkhead - Thread clock - LED machine light - Digital speed display - reducing sleeve - change gears - 2 center points - underframe - operating tool

more

Listing

Nijverdal

7,571 km

ZMM Sliven CU 400 M

Call

Condition: excellent (used), Year of construction: 1998, Lead - and feed spindle lathe ZMM Sliven Type: CU 400 M Year of construction 1998 * Turning diameter 400 mm * Turning length 1000 mm Ciyzegg2n * Center height 200 mm * Speed(s) 21 (20 - 2000) rpm * Spindle bore 62 mm * Feed lengthwise 0.04 - 12 m/min * Transverse feed 0.02 - 6 m/min * Tailstock MK5 * Quill stroke 180 mm * Total power requirement 7.5 kW * Machine weight kg Accessories: * 3-jaw chuck * 4-jaw chuck * Lunette * 2 axes digital display * Quick-change holder incl. 7 tool holders * Coolant device * Machine light * Collet chuck device with collets * Tool cabinet

more

Listing

Niederlangen

7,585 km

OPTIMUM OPTIturn TH 3309D

Call

Condition: new, turning diameter 330 mm turning length 830 mm swing diameter over bed slide 196 mm Swingdiameter in the bed bridge 170 centre height 165 mm centre distance 830 mm Turning length in the bed bridge 430 reus 16 (70-2000) U/min tail stock MK 3 quill stroke 110 mm diameter of quill 32 mm spindle taper DIN ISO 702-2 Nr. 4 spindle bore 38 mm spindle cone MK 5 feed längs 32 / 0,052 1,392 m/min feed plan 3,2 / 0,014 0,38 m/min total power requirement kW weight of the machine ca. 0,52 t dimensions of the machine ca. 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm Bushaq0ws - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

more

Listing

Novi Ligure

8,189 km

Tornio , Lathe machine

Grazioli Dania 200

Call

Condition: ready for operation (used), Year of construction: 1985, chuck size 230 mm Oolfb Centre height 200 mm turning diametre 400 mm Length between centre 1.300 mm Bar size 55 mm machine completely working.

more

Listing

Oberweis

8,279 km

Universal lathe

voestalpine DA210/1

€8,500

Call

Condition: excellent (used), Year of construction: 1979, - Electromagnetic spindle brake - 4-jaw chuck ø 250 mm Bh9madxpiv8 - chuck guard (new) - Tool holder 32 mm - CE-compliant - Year of manufacture 1979 Technical data: - Center distance: 1000 mm - Center height: 210 mm - Turning diameter over bed: 420 mm - Turning diameter over slide: 280 mm - Quill holder: MK4 - Spindle bore Ø: 52 mm - Speed steps: 12 - Speed range: 16 - 1500 rpm - Feed range longitudinal slide: 0.072 - 0.540 mm - Metric thread: 0.5 - 3.756 mm - Inch thread: 6.75 - 46 tpi - Motor power: 4.4 kW - Operating voltage: 400 V - Dimensions WxHxD: 2500 x 1430 x 1110 mm - Weight: approx. 1400 kg

more

Listing

Witten

7,675 km

COLCHESTER TRIUMPH VS 2500

Call

Condition: new, Year of construction: 2023, 0400 mm 246 mm 1250 mm 195 mm D7rercg 54 mm 7,5 kW

more

Listing

Ahaus

7,617 km

BERNARDO SOLID 460-1500 DIGI PRO

Call

Condition: new, turning length 1500 mm turning diameter 460 mm swing diameter over bed slide 270 mm turning dia. in gap 690 mm spindle bore 80,0 mm turning speeds 25 - 1700 U/min bed width 300 mm spindle taper DIN 55029 D 1-8 taper in tailstock 4 MK quill travel 130 mm total power requirement 5,5 kW weight of the machine ca. 1845 kg. range L-W-H 2750 x 1080 x 1600 mm Description: The Solid 460 Pro universal lathe was specifically designed to be economical Manufacture of individual workpieces and small series with high precision designed. Even the basic equipment includes all the important ones Hqeseuotmn Accessories, which make this machine universally applicable. Scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-250 mm / D8 - Clamping disk 450 mm - Coolant device - Initial filling with Shell Tellus 46 - Fixed bezel - Passage diam. max. 150mm - Revolving bezel - Passage diam. max. 110mm - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Motor with magnetic brake according to CE standards - Foot pedal with braking function according to CE - Slip clutch - Rapid traverse longitudinally and flatly - Interchangeable wheels - 2 centering points - reducing sleeve - Thread clock - LED machine light - Chip back wall - Operating tool

more

Listing

Düsseldorf

7,661 km

Nardini ND 220 AE

Call

Condition: good (used), Technical data: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter over support 135 / 270 mm - Center distance 1000 mm - Spindle bore 52 mm - Taper of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm Bheeoxmdth0 - feeds longitudinal + plane - metric thread / Withworth thread / modular thread / DP thread - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center point, new Multifix size B with 3 inserts

more

Listing

Niederlangen

7,585 km

BULMAK / ZMM CU325/1000

Call

Condition: new, turning diameter 325 mm turning length 1000 mm swing diameter over bed slide 250 mm Swingdiameter in the bed bridge 440 mm reus 12 (85-2000) U/min tail stock MK 3 quill stroke 100 mm diameter of quill 40 mm spindle taper DIN 55027 Nr. 5 spindle bore 32 mm feed längs 0,006 - 1,77 m/min feed quer 0,003 - 0,885 m/min total power requirement 2,2 kW weight of the machine ca. 770 kg dimensions of the machine ca. 2150 x 950 x 1350 mm Furnishing: Bvmbak3f - Cooling device - Machine light - chip rear wall - Spindle protection - Lathe chuck protection - Tool holder protection - Foot pedal with braking function CE - Interchangeable gears *incl. Optional equipment - 3-jaw chuck Ø 160 mm type 3204/ DIN6350, BISON - MULTIFIX quick-change holder type A, incl. 4 tool holders - 2-axis digital display DRO Newall

more

Listing

Novi Ligure

8,189 km

Tornio , Lathe machine

Grazioli Dania 215

Call

Condition: ready for operation (used), Year of construction: 1985, chuck size 270 mm Centre Height 215 mm Length between Centre 1.500 mm Bo07nlza7h Bar size 80 mm can also cut screw . machine Fully working. Video on Request .

more

Listing

Barendrecht

7,485 km

center lathe

Mondiale Gallic 400

Call

turning diameter over cross slide: 224 mm, spindle bore: 70 mm, turning diameter over bed slide: 415 mm, center height: 200 mm, center width: 1,500 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 15 rpm, Condition: excellent (used), Year of construction: 2014, Mondiale Gallic 400x1500 spindle taper Bajonet 6 rapid feed on slide 3-jaw chuck, 4 jaw chuck, quick change toolpost, digital read out Biiw70l2cxv

more

Listing

Witten

7,675 km

COLCHESTER MASCOT VS 2000

Call

Condition: new, Year of construction: 2023, 0460 mm 270 mm 1500 mm Ctp28370ki 230 mm 76 mm 11 kW

more

Listing

Ahaus

7,617 km

BERNARDO SMART 410-1000 Digital

Call

Condition: new, turning length 1000 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 45 - 1800 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 3,3 kW weight of the machine ca. 1550 kg. range L-W-H 2,03 x 1,0 x 1,45 m Furnishing : - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Revolving steady rest - passage diam. max. 65 mm - coolant device - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - slip clutch - Revolver stop with fine adjustment - Thread clock - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - First filling with Shell Tellus 46 - LED machine light Ciqq09ffit - change gears - reducing sleeve - 2 center points - Chip back wall - Operating tool

more

Listing

Karsin

8,083 km

Mondiale Nordic 25 lathe

Mondiale nordic 25

€6,600

Call

Condition: ready for operation (used), Functionality: fully functional, 75mm clearance Co9fa0nn9 500mm chuck with rotating jaws Max workpiece diameter 640mm

more

Listing

Barsbüttel

7,700 km

SALTEC SL6240x1000

Call

Condition: used, machine/vehicle number: 170009, turning diameter over bed:400 mm turning diameter over slide rest:250 mm turning length:1000 mm max swing over gap:520 mm Height of centres:200 mm crossed path:230 mm bed width:218 mm main spindle bore:52 mm spindle size:MK 6 speeds::55-2000 U/min turning angle of tool post:90 grad tail stock:50 mm taper in tailstock:MK 4 threading metric:0,4-7 mm threading WHITWORTH:4-60 TPI total power requirement:2,2 kW dimensions of the machine ca.:1940 x 820 x 1545 mm weight of the machine ca.:750 kg tailstock quill:110 mm Gvej0o tapping modul:0,4-3 mm tapping diametral:8-84 Gang/Zoll

more

Listing

Novi Ligure

8,189 km

lathe machine Colchester

colchester Mascot 1600

Call

Condition: used, Year of construction: 1980, Lathe machine Lenght 1,600 mm Bf8muo90

more

Listing

Schwabach

8,026 km

VOEST Alpine DA 180/1

Call

Condition: excellent (used), Year of construction: 1991, The machine is / would be very suitable for vocational training. Very accurate turning machine and runs perfectly ! --> no cheap goods ! . Technical data: Center width 1000 mm Center height 180 mm spindle bore 52 mm Swing diameter over bed 380 mm Swing diameter over support 185 mm Speeds from 24 - 2000 rpm . Bhknslmochi Not a cheap machine ! .

more

Listing

Witten

(dealership location)

7,677 km

COLCHESTER MASCOT VS 2000

Call

Condition: new, Year of construction: 2023, 0460 mm 270 mm B290kv0098 1500 mm 230 mm 76 mm 11 kW

more

Listing

Ahaus

7,617 km

MEUSER M 0 L

Call

Condition: used, turning length 1650 mm turning diameter over bed 410 mm turning diameter over slide rest 240 mm spindle turning speed range 28 - 1250 U/min spindle bore 52,0 mm morse taper MK 4 quill stroke 110 mm bed width 320 mm total power requirement 5,5 kW weight of the machine ca. 2200 kg. Nk7y0uxy dimensions of the machine ca. 2950 x 1200 x 1500 mm from a maintenance workshop Furnishing: - robust lead/pull spindle machine - 4-jaw chuck Ø 240 mm - 4-jaw chuck Ø 250 mm - 3-jaw chuck Ø 250 mm - including replacement jaws - MULTIFIX steel holder, with insert - movable tailstock - Food key - movable bed stop - Protection for bed rails - rotating center punch - Taper mandrel including keyless drill chuck - fixed bezel - rotating bezel - User manual (PDF) * Machinevideo : ?v=XQyZO8rMssA

more

Listing

Barcelona

7,965 km

central lathe

Optimum TH4615

€7,900

Call

Condition: as good as new (ex-display), Year of construction: 2002, Operating hours: 300 h, Functionality: fully functional, Machine in perfect working condition. It is as good as new. It has not come to work Jb2qu3vrl

more

Listing

Barsbüttel/Hamburg

(dealership location)

7,700 km

WAFUM TUD 40

Call

Condition: used, Year of construction: 1973, machine/vehicle number: 32174, turning diameter over bed:440 mm turning diameter over slide rest:125 mm turning length:1500 mm spindle bore:56 mm spindle taper :MK 5 speeds::18-1800 U/min Ipmycd9c total power requirement:6-7,5 kW dimensions of the machine ca.:3100x 1200 x 1500 mm weight of the machine ca.:3 t 1 used center lathe incl. - 3-jaw chuck - feed protection

more

Listing

Mazzano

8,238 km

Potisje Lathe

Potisje usa 250

Call

Condition: good (used), Year of construction: 1990, chuck size 500 mm Chml2rocgn chuck 2 : 250 mm Length 2 meter very good condition machine.

more

Buy-it-Now

Baden-Württemberg, Germany

7,988 km

Heidenreich & Harbeck 18 RO

€3,300

Call

Condition: ready for operation (used), Year of construction: 1957, Functionality: fully functional, L+Z Lathe VDF Heidenreich & Harbeck 18 RO Year of construction 1957 turning diameter over bed: 360 mm turning length: 550 mm Center height: 180 mm Speed range: 20 - 1050 rpm Quill stroke: 150 mm Chuck: Ø 200 mm - 3-jaw FORKHARDT Spindle clearance: 50 mm Space requirement (W x D x H): approx. 2.4 x 1.0 x 1.25 m Machine weight: 1800 kg Total power: 5 kW Bikbwa8zr0y

more

Listing

Witten

(dealership location)

7,677 km

COLCHESTER TRIUMPH VS 2500

Call

Condition: new, Year of construction: 2023, 0400 mm 246 mm 1250 mm 195 mm 9gwkdy 54 mm 7,5 kW

more

Listing

Ahaus

7,617 km

Metal lathe turning machine Colchester Mascot

BERNARDO SMART 410-1500 Vario Digital

Call

Condition: new, turning length 1500 mm turning diameter 410 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52,0 mm turning speeds 30 - 3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 120 mm total power requirement 5,5 kW weight of the machine ca. 1400 kg. range L-W-H 2530 x 1000 x 1450 mm scope of delivery : - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - clamping disc 350 mm - Fixed bezel - passage diam. max. 135 mm - Live steady rest - passage diam. max. 65 mm - Foot pedal with brake function according to CE - Quadruple steel holder - Protective device with quadruple steel holder - Micrometer longitudinal stop - Revolver stop with fine adjustment - Frequency converter - First filling with Shell Tellus 46 C0rhszx - coolant device - slip clutch - Thread clock - LED machine light - change gears - reducing sleeve - 2 center points - Chip back wall - operating tool

more

Listing

Wijchen

(dealership location)

7,560 km

Colchester Mascot 1600,

Call

Condition: used, Lathe, Metal turning machine Model: Conventional Manufacturer:&nbsp Colchester Type: Mascot 1600 7onxh939i Turning-diameter: 450mm Turning-diameter&nbsp gapbed: 700mm Spindle-hole: 78mm Centerdistrance: 2000mm Spindle-speed: 20-1600 Machine-dimensions: 3500x1150x1900mm

more

Listing

AIRCRAFT optiturn TM 4010D 200 x 1000 mm

A - Niederösterreich

8,383 km

conventional lathes

AIRCRAFT optiturn TM 4010D 200 x 1000 mm

€8,990

EXW ONO plus VAT

Call

Condition: new, swing diameter: 400turning length: 1000speed range: 70 - 2.000 min¯¹weight approx.: 500 Bdyr8c2nqi

more

Listing

Reiden

7,976 km

Universal lathe

Reiden R 200

Call

Condition: excellent (used), Accessories available. Centre height 200 mm Center distance 1500 mm Turning Ø via slide 235 mm over bed 425 mm over bend 470 mm Speed Stepless 45 - 2240 rpm Spindle bore 45 mm Ø of the tailstock sleeve 55 mm Morse taper of spindle and tailstock MK 4 Biurw9inn3

more

Listing

Mindelheim

8,079 km

MIOTAL® TC 180 x 1000 V

Call

Condition: new, TC 180 x 1000 V Tip width: 1000 mm Center height: 178 mm Circumferential diameter over bed: Ø 356 mm Bed width: 190 mm Cross slide travel: 160 mm Travel distance top slide: 90 mm Spindle connection: DIN 55029 (Camlock) D 1 - 4 Spindle bore: Ø 40 mm Max. Chuck diameter: Ø 200 mm Spindle speed, infinitely variable: 30 - 2000 rpm Mechanical feed stages: 3 Motor power: 2.2 kW Longitudinal feeds Z: (40) 0.044 - 1.96 mm/rev Face feeds X: (40) 0.022 - 0.98 mm/rev Metric thread: (32) 0.4 - 7.0 mm Thread inch: (32) 4 - 56 Gg/inch Thread module: (32) 0.4 - 7.0 Diametral thread: (32) 7.5 - 112 Quill diameter tailstock: Ø 40 mm Inner taper of quill tailstock: MK 3 Quill stroke: 100 mm Lateral adjustment: ± 10 mm Weight, approx.: 750 kg Dimensions, approx.: 1880 x 880 x 1390 mm Features: - Acceptance certificate according to DIN - Precise, hardened and ground guides - Robust headstock with circulating oil lubrication, precision bearing-mounted spindle, hardened and ground gears for long-lasting quality - Electromagnetic spindle brake (TC), frequency converter with electric braking device (V models) - Torsion-resistant machine beds made of MEEHANITE quality casting, stress-free annealed and multi-ribbed for extremely smooth running - Electrical equipment from SIEMENS/SCHNEIDER - Overload protection for feed gearbox - Pulse button for main spindle - CE / IEC as well as German documentation and German service Basic equipment (standard accessories): - Machine stand with splash guard rear panel - 3-jaw lathe chuck - 4-fold steel holder - Foot pedal with mech. brake device - Coolant device - Chuck guard and spindle cover in accordance with European safety standards CE - 1 Fixed center point for main spindle - 1 Fixed center point MK3 - 1 Test report - Safety devices and electrical equipment according to CE Chfs83gs0u - Reducing sleeve for main spindle Operating tool Available options for this lathe: - 3-axis digital readout - Quick-change holder system Multifix also available as gearbox variants

more

Listing

Ahaus

7,617 km