Used Vertical turret lathes - single column - faceplate diameter 0-1000mm for sale (9)

Condition: good (used), Sell 3 trade-in lathes brand : JENNY ... Dpthpf

Condition: excellent (used), Year of construction: 2011, Control unit: OSP-P200L Max. turning diameter 1000 mm Table diameter Ø 800 mm Horizontal displacement 900 mm Tool turret 12 places Equipment: - Chip conveyor - many tools - water tank - platform Garwels machines and service The right choice We would be happy to provide you with a quote for our additional services - transportation - Installation of the machine - Commissioning B2T0Mibzf - Instruction We are exactly the right contact for - repair - maintenance - service Please also visit our website www garwels de

Condition: used, faceplate diameter:1000 mm swing diameter:1600 mm turning height:1200 mm main drive:75 kW faceplate speeds from - to:7 - 800 U/min milling motor:25 kW milling head speed:7 - 3000 U/min milling spindle - taper:ISO 50 cross rail adjustment - vertical:800 mm ram head dimension:240 x 240 mm weight of the machine ca.:40 to dimensions of the machine ca.:9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor Cgkznglarf

Condition: good (used), Year of construction: 2003, Functionality: fully functional, For sale used Mori Seiki VL-25A1 in excellent condition. Year: 2003 Mori Siki Mori Siki Mori Siki Mori Siki, 2003. Dpqwj9 Delivery parity: EXW Székesfehérvár. We can assist in disassembling and assembling the machine on request.

Condition: excellent (used), Webster & Bennett 36” Fixed Rail vertical borer Table Diameter 36 ” with a set of standard jaws Max swing 46 ” gripped on the inside Max height under cross rail 23” Dpl2P87 Travel of ram 22” Cross travel 23” from centre and will travel 2” past centre Table speeds 185 to 400 RPM ( 12 ) Feeds 0.005” to 0.250” per rev ( 12 ) 25 HP main motor Volt 440 Condition: excellent

Condition: good (used), Year of construction: 1986, Functionality: fully functional, Machine/vehicle number: M 224/50 983, Turning diameter: 1,200 mm, Rapid traverse X-axis: 8,000 mm/min, Rapid traverse Y-axis: 8,000 mm/min, Rotational speed (min.): 6 rpm, Spindle speed (max.): 630 rpm, Workpiece diameter (max.): 1,200 mm, The machine is a Dörries VCE 1400/80 vertical lathe, built in 1986. A simple control conversion was carried out in 2000 and the machine can now be programmed on the laptop supplied. The machine has an additional grinding support and a tool changer. Incl. various accessories (turning tools, jaws etc.) Dpgq0B

Year of construction: 2007, Condition: good (used), Make: Okuma Type: LVT-300 M Control: OSP-P200L Year: 2007 X Travel 210 Z Travel 360 Power 22 kW Driven live tools 7.5 kw / 3000 Rpm In feed table Out feed table Package jaws Package tool holders Chip conveyor Coolant system 9 Bar Grundfos Specifications Metric US Standard Max. turning Ø 280 mm Table Ø 210 mm Horizontal movement support 360 mm Bsqx0Eaa ATC / revolver 12 Speeds / ranges 4000 Rpm C-Axis 360000 ° Dimensions (Estimate) There are no dimensions for this machine (yet). Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Functionality: fully functional, TECHNICAL DETAILS working range x-guide: 730mm swing diameter: max. 900mm face plates: ø 630mm Cs2Wdszude turning diameter: max. 710mm control: Siemens Sinumerik 840C changer: 12 tools tool holder: VDI 60 lathe chuck with tension with additional pull rod in the middle MACHINE DETAILS weight: 13500kg three-phase current: 50 Hz, 380 V, 100 A Total power consumption: 75 kW

Condition: used, Year of construction: 1981, Functionality: fully functional, Machine/vehicle number: A 188/50 801, TECHNICAL DETAILS Manufacturer: DÖRRIES Type: VCE 80 Year of construction: 1981 Control type: CNC Control system: SIEMENS SINUMERIK 840 C Feed speed: 1 - 2000 mm/min Gear stage 1 Speed range: 6.3 - 160 rpm Gear stage 2 Speed range: 22.4 - 630 rpm Face plate diameter: 800 mm Circulation diameter: 1000 mm Crossbar adjustment: 1000 mm Max. Torque: 13500 Nm Chisel slide cross-section of turning and milling support: 775 mm Fzgxlok Vertical adjustment of the crossbeam support slide: 750 mm Max. Cutting force support: 30000 Nm Number of radial T-slots: 22/38x43 Cross section: 40 x 40 mm MACHINE DETAILS Country of origin: Germany Machine no.: A 188/50 801 Machine length: 2500 mm Machine width: 2200 mm Machine height: 3900 mm Machine weight approx.: 8.5 t Supply voltage: 380 V