Automatic bar lathes used for sale
10
Citizen M20
Mfd. 2000
SN: P12133
IEMCA Mini Boss 332 Bar Loader
8 Line Cool Blaster high pressure coolant
P3io2
5
21mm Max. Dia., Spindle Speeds to 6,000-RPM, 1-Sub Spindle, 8-Cross Slides, Monoblock Collet, with 8-Spindle Automatic Bar Loader, Coolant System, Parts Chute, Push Button Control
Zuitbbgl
7
Control Fanuc 31I-,
bar capacity 20mm,
Ihlkkal
maximum cutting diameter 20mm,
maximum cutting length 205mm,
milling speed 8,000rpm,
spindle speed 10,000rpm,
Sub spindle 8,000rpm,
C axis 0.001 degree,
barfeed,
number of controlled axis 7.
7
- - - - - Main spindle - - - - - - - - - - -
hollow 25 mm
--- Subspindle --- - - - - - -
hollow 15 mm
Single spindle automatic lathe WACHTLER - A25 GLE
All accessories are included.
The machine is in a well-maintained condition.
Please refer to the offer for further technical details.
Machine video available on request.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Uvpjcgar
#Tags: A 25 | A-25 | A25GLE
10
No further description
Zo2zc
7
number of spindles 6
spindle passage 32 mm
turning length 152 mm
Speed 200-2800 U/min.
turning diameter 32 mm
feed Werkstoff: 254 mm
Accessories:
Ogcdcc8w7
multi edge turning, univ. thread cutting attachment,
Strehleinrichtung, chip conveyor, 1 set collets, set of change wheels
15
Tsugami B0205-II CNC Swiss
SN: 24436B
Mfd. 2014 (December)
Cutting Hours: 4060
Run Hours: 12128
Power On Hours: 43568
Control: FANUC 0i-TD
Equipped as pictured
B3qzc9anut
Currently configured in chucking mode but can have a Guidebushing installed
IEMCA Mini Boss 322-E Bar Feeder (12-ft) included
4
automatic bar feeder
brand: IEMCA
model: BOSS 432/32
B3lh09wmb2
new in: 2000
barloader was connected to BOLEY BC12
1
Index
Furqwe9we
ER 25
with bar feed
hydraulically controlled
with long turning device
4
Used loading magazine, color format FMB
- year of manufacture: 2001
- passage min. 10 mm, max. 65 mm
Zm2ks
- for material lengths up to max. 3.100 mm
- feed rate infinitely variable
- very short loading times
The loading magazine was connected to a MATRA TM-300 (see pictures).
2
Spindle bore 42 mm
complete with
boring/tapping unit
Bb28icj
side turning attachment
single spindle feeder
8
Bar loader is good as new, only few working hours.
For more information see the data sheet.
Befuqty3
On the machine there is set of guide channels for diameter Ø52.
5
Tornos DECO-20 CNC Swiss Lathe
Mfd. 2000
Mw3kkw
Hours: 52,060
Axis: 10
Tool Positions: 22
Bar feeder: LNS 28057701 Alpha ST320
Mfd. 2015
5
ABC 60 from current production for sale mid 2022.
The loading magazine is already included in the price.
Type IEMCA TAL/ AUTO65/38
The machine is to be sold without tools and holder
Ffxqr77d
Machine is running with cooling oil
Control Siemens 840 C
Machine feautures between the pictures
Integrated machine base to ensure rigidity and stability
Built in spindle motor for both main/sub spindle. High precision ball bearing. Cs axis control and indexing.
Impact structure with low vibration and noise
Gang tool slide with movable headstock. Rotary guide-bush/Fixed guide bush for supporting during cutting.
AC servo control for X, Y、Z、Aaxis.4 axis could be simultaneously controlled. Built-in absolute encoder. High precision linear guide and ball s...
Used bar feeder for max Ø45
- Maximum diameter: 45mm
- Sameca type 0S 6.45
- Year of manufacture: 1999
- Dimensions: 550 cm x 100 cm
Yub8wc
We can ship as well. Shipping costs on request
Swiss type automatic bar lathe.
Eywh2xzxq
14
CNC-lathe 420TS with bar feeder TH-65CE
Produced 2001 a. in Taiwan
Through spindle bar max diameter: 42 mm
X-axis travel: 200 mm
Z-axis travel: 255 mm
Tailstock travel: 255 mm
Axis rapid movements: 12 m/min
Spindle: 5.5 kW, max 4000 rpm
Instruments: 12 places in turret with hydraulic change + 1 in tailstock
Control system: Syntec 900T, I/O improved with USB and Ethernet
Mitsubishi servo and spindle drives
Part cather/conveyor and chip conveyor
Machine dimensions with bar feeder (L x W x H): 4200...
6
Tornos Deco 10 - CNC Swiss
Mfd. 2001
Control: Fanuc PNC DECO
Hours: 35,355
B3pmmouq8t
Axis: 9
Tool Positions: 15
Bar loader: LNS TRYTON-112
4
- 6 Station turret
- spindle bore 43 mm
Bzwvtms9zh
- 2x vertical slides
- 2x cross slides
- weight ca. 2000 kg
- dimensions 900 x 2250 x H 1600 mm
accessories:
- collets
- documents
- guiding tube
9
Traub TK 42 D 5000 automatic lathe bar turning machine
-WKG 1250-
Offered here is a lathe / bar turning machine from the company Traub. The machine is in a very good condition!
Technical data:
Manufacturer: Traub
Type: TK 42 D 5000
Year of manufacture: 1989
spindle diameter: 42mm
Giyniir
gr. workpiece diameter: Ø115mm
spindle speed: 315 - 3150 rpm
total power: 9kW
Equipment:
- 2x grooving slide
- cross slide
- face and longitudinal slides (cross slides)
- pic-up spindle
- workpiece s...
4
With bar feeder
230gcqhz
Weight of the machine without bar feeder approx. 3500 kg
Swiss type automatic sliding head lathe.
Gczw32n
1
Rod guides by Breuning - IRCO
New
Diameter 36mm u. 42mm for 6-channel oil flooded
NP 1.300€
Eldqeq7ey
VB 600€
11
Star ECAS-20 CNC Swiss Lathe
Mfd. 2010
SN: 0601 (46)
B3ohntjxos
20mm Capacity
Siemens control
With IEMCA Loader
Counter-face gang type tool post
Turning Tool: 6 Tools
Front-end working stationary tool: 4 tools (back end tool post)
Rear-end working stationary tool: 2 tools (back end tool post)
Power-driven tool: 6 tools
4-Spindle Back Working Unit
Stationary tool: 4 tools
3
- 6 Station turret
- spindle bore 61 mm
- 2x vertical slides
- 2x cross slides
- weight ca. 2200 kg
- dimensions 900 x 2250 x H 1600 mm
accessories:
- collets
- documents
Psxi7
- guiding tube
4
Max turning diameter 15 mm
Bzosoacqdt
12
Control Mitsubishi Meldas 635 LCC
Counter spindle
2x12x turret
turret 2 with C-axis
12 x driven tools
collet clamping 48 F
Tool holder VDI 20
rpm 4500/6000
Connected load 7,5 kW
Approx. 11000 operating hours
B0xa3iestb
Short loading magazine LNS Quick Load
Installation dimensions 6000 x 2100 x 2100 mm
Weight 3,3 to
Top condition
2
Swiss type automatic sliding head lathe.
Etcqpf7
3
Bar feeder
brand: IEMCA
type: TAL/AUTO 65/32
new in: 1990
Dv37u8l
was attached to: INDEX G200
11
Type: CNC SWISS LATHE
Manufacturer: HANWHA
Model: STL-32-H
Year: 2010
B3ohmwwgsp
32mm Capacity
Control: Siemens 840D
Main Spindle
Sub-Spindle
(1) Turret (10 Stations)
Machine was holding a ±.0005 backturn on a part they ran on it for years.
Machine comes with 10-11 live tools and holders, and has a lot of tooling.
It has multiple programmable axes on the main and turret. Company was doing an angle hole
with the B-axis
2
CNC-multislide automatic:
-Bar capacity 26 mm
-Collet clamping system 161E
-Cross slide
-Slides for plunging (3x)
-Turret with 6 toolpositions
-Partscatcher
Bzqrstgqhp
-Set toolholders
-Interface for barloader
13
In a very good condition
Dqdksbkzc
15
Bar loader Breuning IRCO SiMag 100.1-3
Year of construction: 2005
Bw9mgjsamd
100mm bar loader
including different bar slides
5
Automatic lathe unloader IRCO Breuning ILS REX 7208
- Last connected to Nakamura WT-150
- Fully functional
- bar passage Ø5 - Ø72mm
Gmbd39m
- max. part length 800mm
- Various accessories (see pictures)
Changes and errors in the technical data and information, as well as prior sale reserved!
3
barloader
brand: IEMCA
typ: SIR 25 F
new in: 1998
Bwdplm9jih
10
Absolutely mint condition. The bar loader was connected to a Spinner TC300 lathe and has run maybe 4 hours. An intermediate stand from Spinner is also included then bars can be loaded up to max. 1500mm.
The bar feeder is sold on behalf of a customer.
Bzmybmwfhv
2
CNC-multislide automatic:
-Bar capacity 42 mm
-Collet clamping system 173E
-Cross slide
-Slides for plunging (3x)
-Turret with 6 toolpositions
-Partscatcher
-Chipconveyor
-Set toolholders
-Interface for barloader
Nadrwl
2
ESCOMATIC D2/D4/D5 TOOL HEAD serial N° 2751 state refurbished
ESCOMATIC D2/D4/D5 WERKZEUGKOPF Drehköpfe Überholung
ESCOMATIC D2/D4/D5 testine rotanti
Mwmdy8
3
Servo Bar 300 bar feeder manufactured in 2005.
The feeder after a general inspection, all damaged elements replaced, bearings on the axle replaced. Covers after powder coating, plexiglass in the cover replaced with new ones.
The feeder has been tested and is fully operational.
Parameters:
- diameter 10-76 mm
- length 250 mm
- feeder weight approx. 500 kg
Bs308qzqlt
- max weight of a bar 290 kg
- height adjustment 1,230 - 1,350 mm
- additionally, the set includes a base for a lathe and a...
1
Details on Request
Q7l3cs9fj
5
Bar feeder
Xzkpco0
brand: IEMCA
type: AS325
new in: 1980
3
Davenport 3/4 serial no. 6580 needle roller bearings, pick up, threading attachment complete w/ bar loader IEMCA PRA
Bvdkzw8um9
2
Barcapacity 42 mm including barfeed
Btvy827
1
ESCOMATIC D6 Counter collet attachment
073xwtmb
Turret Automatics with Rotary-Transfer Unit, Overall base dimensions 1700x1120x1700 mm, Weight: 1800 kg, Nominal power: 4 KW,
Maximum bar diameter: 16 mm, Min-Max distance between revolver and Spindle head: 48,5-113,5 mm,Revolver slides adjustment: 15mm, Revolver Slides Max Travel: 50mm, Travel of cross-slides: 32mm (4x withoun and 3x wth indexing plate), Driven by 4 KW Pole-changing Flanche Motor,Max. Ground Dimensions 1700x1120 mm, Hight: 1700 mm, Weight: 1800 KG, With all Documentation in Ger...
5
The bar feeder is in very good condition, fully operational. It worked with Gildemeister MF65 Twin machine
Maximum diameter of feeding bar 65mm
Maximum length of the bar 4300mm
Cwx88j8s
3
automatic barloader
Hjq0os9
brand: TORNOS BARBOY
model: 29-AA1
2
Davenport 3/4 serial no. 4705 needle roller bearings, pick up, threading attachment complete w/ bar loader IEMCA PRA
Bvdkxbebyw
2
Available bar feeder Traub for 3 meters long bars.
Bsclrmomyf
