Used cNC lathes 200-249mm turning diameter for sale (105)

Condition: good (used), Year of construction: 2007, Traub TNX 65/42 Milling and Turning Center Mfd. 2007 Serial #7060107 Commissioned in 2010 TX 8i-S control (Mitsubishi/Traub based control with Mitsubishi drives and motors) 15 CNC axis’s (4) X-Y-Z turrets with 10 positions each. Up to 20 tools per turret 65 mm thru hole main and sub spindle (sub spindle has coolant flush) Foot pedal control for clamp/unclamp of spindle chucks Servo driven gantry receiver Hydraulic swivel w/ pneumatic finished part and bar remnant gripper Isdpfx Afeq Npqms Setr Finished part conveyor belt RESY paper band coolant filter Knoll Coolant tank with BKW refrigerated coolant temperature control 20 Bar High pressure and 8 Bar Low pressure coolant pumps Knoll chip conveyor FMB Turbo 5-55 magazine bar feeder (new in 2010) 2) Single stick turning tool holders 2) Double stick turning tool holders 1) Cut-off tool holder 1) Overdriven double radial live ER Collet tool holder 1) Overdriven radial live ER Collet tool holder 4) Radial live ER Collet tool holders 1) Radial live End Mill tool holder 1) Angle adjustable live ER Collet tool holder 2) Radial live Shell Mill tool holders 2) Axial live End Mill tool holders 6) Axial live ER Collet tool holders 43) Additional tool holders on separate list (see supplemental attachment) Hainbuch main spindle collet chuck Rohm sub spindle 2 jaw chuck 2 Spare sets of spare Z-axis ball screws and bearing packs.

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Itsdpfxortrlzo Af Sor Equipped with: Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: good (used), Year of construction: 2007, Number of NC axes: 5 Bar capacity: 42 mm Max. turning length: 100 mm Max. swing diameter: Ø 700 mm Rapid traverse: 17.5 m/min MAIN SPINDLE Max. spindle speed: 4,000 rpm Isdpsxa Ex Nefx Af Sotr Spindle power: 7.5 kW Collet chuck: DIN 173E Tool holder (square): 20x20 mm Tool holder (round): Ø 20/25 mm C-axis resolution: 0.1° TOOL POSITIONS Total: 14 Outside main spindle: 5 Inside main spindle: 3+4 Driven tools: 2 Simultaneous machining: internal + external Weight: 2,700 kg Bar feeder for 3m bars

Condition: good (used), turning length: 500 mm, turning diameter: 300 mm, spindle bore: 62 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 520 mm, Mori Seiki SL-15 CNC Turning Center Machine Type: CNC Turning Center (2-Axis) Serial Number: 1899 Control System: Mori Seiki MSC-516 Maximum Turning Diameter: approx. 300 mm Itsdpfjx Hp Ikox Af Ssr Maximum Turning Length: approx. 500 mm Swing Over Bed: approx. 510 mm Axis Travels X-Axis Travel: approx. 210 mm Z-Axis Travel: approx. 520 mm Spindle Nose: A2-6 Spindle Bore: approx. 62 mm Maximum Spindle Speed: approx. 4,000 rpm Spindle Motor Power: approx. 11 / 15 kW Tool Turret: 12-Station Tool Size: 25 × 25 mm Equipment & Features Hydraulic Tailstock Tool Presetter 6.5" 3-Jaw Power Chuck Coolant System Machine Weight: approx. 4,000 kg Machine Dimensions (L × W × H): approx. 2,700 × 1,600 × 1,700 mm

Condition: excellent (used), Year of construction: 2004, MAZAK QUICK TURN NEXUS 200MS-Y Itjdpfx Afow Du S Aj Ser Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol 640T Nexus - KITAGAWA three-jaw chuck BB-208 for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck B-206 for 2nd spindle, diameter 169 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2011, 400mm swing over bed, 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, Iodeucdt Aepfx Af Sstr 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: good (used), Year of construction: 1996, functionality: fully functional, CNC Lathe Itedpfxsv T Uf Ae Af Ser Manufacturer: HITACHI SEIKI Type: TF 20 Year 1996 Control: FANUC 21TB Chuck diameter: 210 mm Forkardt. Maximum turning diameter: 200 mm Forkardt Turning length: 250 mm Spindle speeds: 52-4500 rpm Spindle bore: 52 mm Tool turret with 8 positions Rapid traverse X and Z: 25 m/min Machine without tailstock. Machine can be demonstrated under power. In good condition, complete machine documentation is available. For further information, see data sheets.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Equipment: documentation/manual, The used DIAMOND SJ 22 2-axis cnc lathe is a fast CNC lathe with an inclined bed and 2-axis flat guideways of medium size, and it is equipped with FANUC 0i-TC cnc, year of construction 2007, "CE" standard. Main features: X-axis travel 280 mm Z-axis travel 360 mm 45 mm Spindle: max. rotational speed 6,000 rpm Spindle motor power 7.5Kw Iodpfxot N Upve Af Setr Stations on turret 12 pos. Hydraulic tailstock with in-cycle quill, chip conveyor evacuation conveyor, set of tool holders, 250mm 3-jaw chuck with related jaws, and user and maintenance manuals complete the equipment.

Condition: good (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 5088, spindle bore: 25 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, total height: 1,300 mm, total length: 1,200 mm, total width: 800 mm, overall weight: 700 kg, WEILER PRIMUS GS Lead and Feed Screw Lathe - Operating voltage: 380 V - Control voltage: 220 V - Power connection: 2 kW - Rated current: 4.1 A - Frequency: 50 Hz - Distance between centers: 450 mm - Center height over bed: 130 mm - Swing over bed: 260 mm Ijdpfx Afjx Ekm Es Sstr - Center height over cross slide: 70 mm - Swing over cross slide: 140 mm The machine is equipped with a tailstock, a Multifix quick-change tool post, and a three-jaw chuck by RÖHM, diameter 120 mm. Comes complete with a matching workshop cabinet and appropriate accessories. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck.

Condition: ready for operation (used), Year of construction: 1987, turning length: 260 mm, turning diameter: 180 mm, Fanuc OT 10-position turret maximum spindle speed 4500 rpm Isdpfx Aox Ikunef Setr weight 2300 kg

Condition: excellent (used), Year of construction: 2022, MAZAK QUICK TURN 200MY Max. machining diameter: 380 mm Max. machining length: 555 mm Max. milling speed: 5,000 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC CONTROL Mazatrol SmoothG - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar loading magazine Isdpfsx Dr Uljx Af Sjtr - automatic part catcher - NC tailstock - reinforced coolant pump - chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: good (used), Year of construction: 2011, 450mm swing, 210mm max diameter, FANUC 0i Control, 51mm bar capacity, 12 station turret, Iodsxuhwqepfx Af Sstr 11/7.5kW Spindle Motor, 4,500 rpm, collet chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Year of construction: 2011, On behalf of our customers we offer Ijdpsqu Uhdsfx Af Setr CNC lathe Müga-Turn GT 4 - 42 S turning diameter 232 mm turning length 100 mm Control MITSUBISHI M 70 L Number of axes 4 pcs. Bar diameter 42 mm Rapid traverse 20 m/min Speed 4000 rpm Drive 7.5 kW Swing diameter 560 mm Total power requirement 14 kW Machine weight approx. 3.2 t Space requirement approx. 3.1x1.75x1.86 m Chip conveyor with counter spindle with heat exchanger we only answer inquiries with your name and telephone number

Condition: good (used), Year of construction: 2012, Datasheet: Travels: Turning length: 1,000 mm Turning diameter: 360 mm X-axis: 260 mm Z-axis: 1,000 mm C-axis: 0.001 degrees Spindle machining diameter: 410 mm Swing over bed: 580 mm Main spindle: Iedpfx Afsq Dpuzo Sotr Cross section: 80 mm Spindle drive: 22 kW Spindle speed: 5,000 rpm Torque: 427 Nm Weight and dimensions: 6,000 kg LxWxH: 3,000x1,800x2,3000 mm Touchsetter NC tailstock 12-position turret with driven tools Kitagawa B210 chuck Mayfran chip conveyor 8 bar coolant pump

Year of construction: 2004, condition: excellent (used), Max. turning length: [mm] 600 Turningdiameter: [mm] 246 Bar capacity: [mm] 52 C-Axis 360° Iodpfoiq Nb Tsx Af Sjtr

Condition: new, The LabTurn 2028 CNC, part of the CNC Slant Bed Lathes category and 2-axis CNC Lathes group, is designed for both CNC training and the efficient production of small workpieces. This compact and mobile lathe combines the functionality of larger production machines with a robust cast-iron inclined bed design, ensuring excellent stability for precise machining. The machine features an 8-station tool turret with four tools each for inside and outside turning and a max spindle speed of 3000 rpm, enabling versatility in various applications. Additionally, the Siemens 808D Advance controller provides an intuitive interface for beginners. The LabTurn includes a 100 mm 3-jaw chuck, hydraulic tailstock, and a well-structured design with an enclosed workspace for safety. Enhance your machining capabilities with the LabTurn and experience the potential for high precision and performance. Request a quote today to explore this superior CNC Slant Bed Lathe. Iodpfxeuy Iclo Af Sotr

Condition: used, Year of construction: 2000, machine/vehicle number: 202000, Hegenscheidt MFD 7893 CNC Deep Rolling Machine Itjdpfoxxyluox Af Ssr max length 920mm, max radius of counter weight (deending on dtroke and bearing width) 195 - 270mm, max 8 main + 6 pin bearings, min/max main bearing dia 33 - 88mm, min/max pin bearing dia 30 - 84mm, max bearing width 18,5mm, max stroke 140mm, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 35kVA, weight 13to

Condition: good (used), Year of construction: 2020, 400mm swing, 220mm max diameter, 490mm between Centres, Siemens 828 Control, 65mm bar capacity, 12 station VDI30 turret, 17kW Spindle Motor, Spindle Speed 4000rpm, 0.001 degree C axis, Itedoxy Rt Sopfx Af Ser +/- 35mm Y axis, 3 jaw power chuck, low volt light, coolant, Tool setter, Tailstock, swarf conveyor

Condition: good (used), Heid S-200 CNC Lathe Manufacturer: Heid Type: S 200 Machine Type: CNC Lathe Iodpfx Aox Elw Eef Sstr Tailstock Travel: 175 mm Tailstock Spindle Taper: Morse Taper: MT4 Quad Stroke: 140 mm Quad Diameter: 95 mm Driving Force: 17 kN Power Supply: 50 Hz, 3x: 380 V Total Power Requirement: 65 kVA Spindle Speeds: Infinitely Variable from 0 rpm to 4000 rpm Spindle Bore: 77 mm Tool Shank Cross-Section: 25x25 mm Swing Diameter over Bed: 420 mm Maximum Swing Diameter: 250 mm Turntable Slide: Longitudinal Travel (Z-Axis): 1150 mm Cross Travel (X-Axis): 230 mm You can find more items – new and used – in our Shop! International shipping costs on request!

Condition: not inspected (used), Year of construction: 1989, We are offering the following as part of an insolvency sale: 2 x CNC lathes (1 x with sub-spindle, 1 x with lower turret), used + Bar feeder + Accessories 1. CNC lathe with sub-spindle Make: MIYANO Model: BNC 34-S Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 2 x collet chucks - 1 x 3-jaw chuck 2. CNC lathe with 2 x turrets Make: MIYANO Ijdpfx Afsx Ed A De Sotr Model: JNC 45-T Year: 1989 Control: Fanuc 0-T - HYDROBAR bar feeder - 1 x collet chuck - 1 x 3-jaw chuck 3. Accessories - Approx. 65 x collets - Approx. 40 x jaw sets - Various tool holders + tools - Documentation The machines are untested, but they were in operation until decommissioning. Sale is ex-location; loading can be provided at extra cost.

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15KX239200001, Technical specifications: Work Area - Maximum turning diameter: 210 mm - Maximum machining diameter: 200 mm - Maximum workpiece length: 220 mm - X1/X2 axis travel: 220 mm / Rapid traverse in X: 24 m/min - Z1/Z2 axis travel: 220/770 mm / Rapid traverse in Z: 36 m/min - Y1/Y2 axis travel: +/-40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis strokes: X - 210 mm; Y - 680 mm; Z - Left 2080 mm / Right 3360 mm; α 270˚ - Maximum speeds (m/min): X - 35; Y - 120; Z - 160; α 270˚/1.5 sec - Load/unload gripper specifications (pneumatically powered): Outer diameter up to Ø170 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle: - Spindle nose: A8 - Maximum speed: Left 5000 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: left spindle - 65 mm / right spindle - not available Tool Turret with Driven Tools: - Tool interface: BMT55 - Number of positions: 15 upper / 12 lower station turret, all driven positions Itodpfx Afexwuhuj Sor - Maximum speed: 4500 rpm; Milling motor power: 4.5 kW Electrical Equipment: - Operating voltage: 200V, 3-phase, 151A fuse - Connected load: 55 kVA Dimensions: - Machine dimensions (L×W×H): 3200 × 2200 × 3500 mm - Weight: 10,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip removal, gantry loading/unloading from conveyors - Automation includes: Gantry robot + 2 loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip removal conveyor - Coolant filtration 40 bar max: Filber S.L. FTH5/10, 200 l/min - In-process control: Marposs T25 - Broken tool detection system: Peek tool menu Murata/Fanuc feature enabled - Part detection through spindle: Low pressure compressed air sensors - Bar feeder interface max Ø65 mm - Documentation: Electronic and hard copy available Machine condition: OPERATIONAL

Condition: excellent (used), Year of construction: 1996, operating hours: 46,282 h, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 2,600 mm, total length: 11,000 mm, total width: 2,000 mm, overall weight: 6,000 kg, controller manufacturer: TRAUB, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, number of slots in tool magazine: 10, - Includes two 10-position tool turrets with driven tool stations - Includes HAINBUCH chuck system - Includes sub-spindle, bar feeder (manufacturer: STAMAG) - Includes chip conveyor TECHNICAL DATA: - Operating voltage: 400 V - Frequency: 50 Hz - Control voltage: 230 V - Rated current: 85 A - Connection: 54 kW - Connected load: 39 kW - Noise emission value at operator position: 71 dB(A) Ambient conditions: - Temperature: 5 – 40°C - Air humidity: max. 70% - Workpiece removal via sub-spindle - Max. sub-spindle speed: 4000 min-1 - Max. workpiece diameter: 56 mm - Programming: EIA and ISO code Input and output resolution: - X/Z: 0.001 mm - C axis: 0.001° - Rapid traverse: max. 15 m/min - Fine interpolation cycle: 0.34 ms - Largest thread pitch: 999.999 mm - Largest radius: 99,999.999 mm - Feed override: 0…200% - Rapid traverse override: 0…100% - Speed override: 50…120% - Speed input: 5 digits - Cutting speed input: 4 digits - Tool input: 4 digits - Program number: 8 digits Itodpfx Aowpa Ruof Sor - Subprogram number: 8 digits - Block number: 4 digits - M-functions: 3 digits - B-functions: 6 digits - Memory capacity: 32,000 characters - Tool correction pairs: 40 NUMERICALLY CONTROLLED TURNING AND POSITIONING UNIT (C AXIS): Main spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 100 Nm - Accuracy: +/- 3 min Sub-spindle: - Max. speed: 80 min-1 - Torque at 100% duty cycle: 30 Nm - Accuracy: +/- 3 min TOOL CARRIER 1 & 2: - Driven tools per tool carrier: 10 (14) - Max. speed: 4000 (8000) - Power at 100% duty cycle: 1.5 kW - Power at 15% duty cycle: 4 kW - Torque at 15% duty cycle: 12.4 (4) Nm - Tool holder/tool carrier quantity: 10 (14) - Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm - Chisel cross-section: 20 x 20 (16 x 16) mm - Chip-to-chip time (per VDI 2852): 1.2 s - Switching time one station: 0.6 s - Over 5 stations: 1.5 s SUB-SPINDLE (NUMERICALLY CONTROLLED IN Z DIRECTION): - Max. speed: 4000 min-1 - Max. clamping diameter: 65 mm - Three-phase motor steplessly programmable: 11 kW - Torque: 210 Nm - Feed force at 100% duty cycle: 6000 N - Feed travel: 520 mm - Ball screw operation: Ø 32 x 10 mm HYDRAULICS: - System pressure: 60 bar - Tank capacity: 150 l COOLANT LUBRICATION: - Per tool carrier: 1-stage centrifugal pump - Pump pressure: 5/12 bar - Tank capacity: - without chip conveyor: 300 l - with chip conveyor: 280 l NOTICE: Due to sporadic work, the operating hours may still change slightly.

Condition: excellent (used), operating hours: 8,500 h, functionality: fully functional, * Muratec MT 25 MC. * Extremely well equipped, equipment value: €30,000–35,000. * 7 controlled axes machine. * Twin spindles. * Two turrets. * Each turret with 15 positions, all motorized. * Live tooling, C axis. * Integrated spindle motor, 15 kW. * Spindle motor starting torque: 420 Nm. * Live tool drive motor: 4 kW. * Spindle nose size: A2-6. * Maximum machining diameter: 370 mm. * Maximum machining length: 920 mm. * Bar capacity: 65 mm. * Box way guides on all axes. Itsdpex Ab N Asfx Af Ssr * Two 250 mm hydraulic chucks per spindle, metric system. * Automatic finished parts catcher arm. * Automatic secondary spindle cleaning with air or coolant. * Conveyor belt for finished parts. * Interface for bar feeder. * Multifeed bar loader, 1.5 meters. * Automatic load monitoring and tool consumption monitor. * Part transfer system between spindles with automatic torque control. * Fanuc CNC. * Fanuc motors and servos. * Rapid traverse speeds: 20 and 25 m/min. * Main spindle speed: 3,500 rpm. * Live tool speed: 3,000 rpm. * Turret index time: 0.2 seconds. * Rear chip conveyor, hinged type. * Complete set of external and internal static tool holders included. * Complete set of axial and radial live tool holders included (valued at €13,000). * Machine currently in operation. * Weight: 10,800 kg. * Immediate delivery unless previously sold.

Condition: excellent (used), Year of construction: 2018, operating hours: 21,000 h, functionality: fully functional, machine/vehicle number: S4E184001, turning diameter over cross slide: 430 mm, turning length: 670 mm, turning diameter: 220 mm, spindle bore: 45 mm, spindle speed (max.): 6,300 rpm, overall weight: 4,300 kg, Used CNC hard turning lathe with counter spindle Manufacturer: EMCO Itsdpfx Afsw Rrvwj Ssr Model: Emcoturn 45E Year of manufacture: 2018 Few operating hours Control: Siemens 828D Number of tools: 12 driven units Max. speed: 0-6000 rpm

Condition: as good as new (ex-display), Year of construction: 2018, operating hours: 200 h, functionality: fully functional, machine/vehicle number: 1421160-BV40058101, turning length: 300 mm, turning diameter: 240 mm, spindle bore: 61 mm, spindle speed (max.): 3,500 rpm, travel distance X-axis: 190 mm, travel distance Z-axis: 400 mm, spindle motor power: 11 W, rapid traverse X-axis: 18 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,880 mm, total length: 2,860 mm, total width: 1,700 mm, overall weight: 3,400 kg, bar passage: 42 mm, CNC Lathe Takamaz XL-150M – ex-showroom machine, almost zero operating hours, has never processed material. The machine is virtually new, year 2018, in like-new condition. Equipped with Fanuc CNC, driven tools, and a wide range of accessories. As shown in the photos, the interior of the machine is completely intact with no signs of wear or machining damage: has never produced chips. Key data: Year of manufacture: 2018 Serial number: 1421160-BV40058101 CNC: FANUC Series Oi – TD Max. swing diameter: 280 mm Max. turning diameter: 240 mm Max. turning length: 300 mm Bar capacity: 42 mm Spindle bore: 61 mm Spindle: SMW AUTOBLOK 3-jaw chuck, diameter 210 mm Connection: ASA A2-8 Spindle nose height: 1050 mm Bearing inner diameter: 100 mm Spindle speed: up to 3500 rpm Axes: X-axis travel: 190 mm Z-axis travel: 400 mm Rapid traverse rates: X 18 m/min – Z 24 m/min Turret and tooling: 12-station turret ID/OD tool holders 25x25 mm Boring bar holder Ø 32 mm Index time: 0.1 sec Driven tools up to 4000 rpm Motors and power: Spindle motor: AC 11/7.5 kW X-axis servo motor: 1.2 kW Z-axis servo motor: 1.8 kW Max. absorbed power: 24 kW Itjdevw Ahyepfx Af Ssr Dimensions and weight: Footprint including chip tray: 2860 x 1700 x 1880 mm Net weight: 3400 kg Included accessories: Right-hand belt-type chip conveyor 1 axial driven tool holder 1 radial driven tool holder 6 static tool holders (2 boring bar holders + 4 external tool holders) Included documents: Lathe operation manual Programming manual CE Declaration of Conformity Like-new condition – machine available for immediate delivery and can be tested on appointment at our facility or via live video inspection.