Used accessories and spare parts for lathes for sale (275)

Condition: used, machine/vehicle number: 0719, Mounting cone: MK 6 Core tip angle: 60 ° Gbslhodhwzfecdwyjl Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg

Condition: used, machine/vehicle number: 1109, Mounting cone: MK 6 Core tip angle: 60 ° Load: 3000 daN max.workpiece weight: 5000 daN Weight: 16 kg Gbslhcdwodhwzasyjl

Condition: used, Mounting cone: MK 6 Core tip angle: 90 ° Load: 3000 daN max.workpiece weight: 6000 daN Gelsdhwy Tehcdwyebl Weight: 16,9 kg

Condition: used, Retainer metric 80 Core tip angle: 60 ° Total length: 380 mm Gslhodhwzwscdwysbl Weight: 18 kg

Condition: good (used), Year of construction: 1998, Center height 1700 mm Can be extended or shortend to matching height as they are 2 peices Central lubrication Each steady rest equipped with 3 point Driven / Morotized units Length:1800mm Gbjlhcdwjwrcxaeysl Width:1600mm Height:2100mm Weight:1800kg

Condition: good (used), Manufacturer: POREBA Type: TPK 90 / 110 Year of manufacture: 1994 Swing steady 1 is 150 mm Swing steady 2 is 350 mm Swing steady 3 is 500 mm 3 units suitable for TPK 90 (or with spacers TPK 110) Spacers are not included 2nd tool post to be mounted on slide Specifications Metric US Standard There are (still) no specifications for this machine. Dimensions (Estimate) Length 1200 mm Width 800 mm Height 1000 mm Weight Gbolhewrrbkocdwysl 1800 kg Please note: The information on this page has been obtained by us to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation or contract terms. We recommend you check all important details.

Condition: good (used), Year of construction: 2001, Manufacturer: VDF Wohlenberg Type: V-Model Year of manufacture: 2001 Maximum swing 500 mm 3 x adjustable bronze rollers 2 Matching steady rest Specifications Metric US Standard Fixed steady rest Fixed Min. diameter 50 Max. diameter Golhcdwewrrbweyjbl 500 Center height 500 mm Dimensions (estimated) Length 1200 mm Width 800 mm Height 1200 mm Weight 800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual obligations should be assumed. We recommend that you check all important details. Share on

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm Gbjljwcd A Iehcdwyel -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg

Condition: used, Collet set, chuck collet holder for draw-in collets WEILER Collet chuck, collet holder, collet device Suitable for WEILER Praktikant lathe, year of manufacture 1984 Draw-in collet type: FM 613 / 386E DIN 6341 Collet diameter: 32 mm Collet length: approx. 115 mm Collet thread: TR 32 x 1.5 mm - Collet holder sleeve with MK 5 external taper (Ø 44 mm) Gslhcdwoy Ra Dqeyobl - Draw tube with internal thread M 32 x 1.5 mm, handwheel for manual tightening of the collet - 15 pieces FAHRION collets: Ø 10, 15, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80 mm - fits WEILER Praktikant and should also fit WEILER Matador Total weight: 10.5 kg Very good condition

Year of construction: 2014, condition: excellent (used), Bar feeder Top Load 4-25 Machine no. BRS 14022870, Year of manufacture: 2014 Gjlhcoy Rzc Iodwysbl

Condition: excellent (used), Year of construction: 2020, Steady rest for WEILER E40 and E50 lathe In very good condition. Gjlhcstx Avkjdwyjbl Price for E40 steady rest: €2,500 Price for E50 steady rest: €2,850 Clamping range: 10 – 150 mm.

Condition: excellent (used), Boring bar Bar diameter: 180 mm Overall length: 2500 mm Gslhcjum Uzgjdwyobl Weight: 920 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Top support Heyligenstedt (28493) Height of clamping surface to steel support 103 mm Length 690 mm Width 250 mm Total height 240 mm Bolt circle diameter 225 mm Gelhcdwsttk Smjysbl Multifix basic holder size C Weight 56 kg

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Suitable for Gildemeister GDM 42 Through-hole cylinder RÖHM SZS 45/92 559 Ident no.: 414096 Serial no.: 7069 Operating pressure: max. 40 bar Speed: max. 7000 rpm Gbelhcey E T A Aodwyel Piston diameter: 125 mm Piston rod diameter: 62/53 mm Piston stroke: 25 mm Inner diameter of cylinder tube: 45 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic operation of power chucks or collet chucks. Through-hole cylinder for hydraulic actuation of power or collet chucks with a through-bore.

Condition: good (used), functionality: fully functional, used 6-position turret tool changer for Weiler 260 Gbslhsy Rx I Iscdwyol

Condition: used, 3-jaw wedge bar power chuck FORKARDT type HGF 160-45-3 HI GRIP No. 109452 Diameter: 165 mm Internal diameter: 46 mm Cylindrical centering ring mounting: Ø 140 mm Max speed: 5,500 rpm - Wedge bar chuck with centrally adjustable clamping jaws - 1 set of stepped jaws, reversible for use as hard or soft jaws (can be reversed by 180°) Gelhcdsy Ehypjwysbl - 3 mounting holes Ø 11 mm, bolt circle 105 mm Weight: 9.3 kg Very good, as-new condition

Condition: used, Type: AE 100 S Part No.: 202-00023 Gbolhcdwjy Apcmoyjl Steps/revolution: 1024 Model/Version: 471/V001 Interface/Code: Parallel/Binary Output level: Push/Pull +(11-27) Volts Option: F/R, Latch incremental adjustment

Condition: used, TECHNICAL DETAILS - Bar diameter : 6 - 80 [mm] - Bar length : 1600 [mm] Gelhey H Rciecdwyebl POWER SUPPLY - Supply voltage : 200 - 480 [V] - Total installed power : 5 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2048 x 1486 [mm] - Machine height : 1748 [mm] - Machine weight : 600 [kg]

Condition: used, Barloader BREUNING IRCO SIMAG 42.1 R-3000 Gbjlhjwdamfscdwyel

Condition: good (used), BILZ Size 3 Radius Lathe Gbolev Sag Nshcdwysl Turning Diameter 150 - 250 mm Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Tool trolley with inserts with turning holder for NC lathe, Gbjlhey Hqybjcdwysl Shaft: 50 mm

Condition: good (used), functionality: fully functional, 3 inserts for Multifix, size C, Gbslhcdoy Hf Awjwyjl

Condition: used, Hydraulic power chuck cylinder for actuating power chucks Hollow clamping cylinder RÖHM SZ-E68/115 459-109 ID No.: 426518 Serial No.: 22950 Gelhcdsyy Dfkewyobl Operating pressure: max. 50 bar Speed: max. 5,000 rpm Piston diameter: 150 mm Piston rod diameter: 88/100 mm Piston stroke: 10 mm Internal diameter in cylinder tube: 68 mm Threaded connection for draw tube: presumably M79 x 1.5 mm Flange diameter: 185 mm Flange pitch circle: 140 mm (6x M12) Internal centering diameter: 101.7 mm - Flange connection towards spindle side Weight: 25 kg Required space L x W x H: 350 x 250 x 190 mm Hydraulic power chuck cylinder for opening and closing automatic power chucks. For hydraulic actuation of power chucks or collet chucks. Hollow clamping cylinder for hydraulic actuation of through-bore power chucks/collet chucks.

Condition: used, SMW Steady Rest Type SLU-X1-ms including mounting bracket for CNC lathe DMG Mori CTX 500 Condition: Used Features: Housing: fully sealed Safety: integrated safety valve Stroke control: prepared for end position monitoring Lubrication: connection for central lubrication (oil or grease) Gslhsyx U H Aocdwyobl Technical Data Centering range (without chip guard): Ø 4 - 64 mm Centering range (with 3-piece chip guard): Ø 11 - 64 mm Operating pressure (min./max.): 8 / 35 bar Max. clamping force per roller: approx. 400 daN Centering accuracy: 0.02 mm (across the entire range) Repeatability: 0.005 mm Weight approx. 12 kg

Condition: good (used), Toolholders bought in company where used for Biglia machine Gjleyuyhiohcdwysbl