Used vertical turret lathes - single column - faceplate diameter 1001-1299mm for sale (7)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 102, turning height: 1,250 mm, workpiece weight (max.): 8,000 kg, turning diameter: 1,550 mm, faceplate diameter: 1,250 mm, spindle speed (max.): 3,000 rpm, TECHNICAL DETAILS Turning height: 1,250 mm Workpiece weight: 8,000 kg Turning diameter: 1,550 mm Duslhcdeybbi Iowxsn Faceplate diameter: 1,250 mm Faceplate speed: 200 rpm Spindle speed: 3,000 rpm Tool changer: 15 positions MACHINE DETAILS Control: Siemens 840 D Type of supply current: Alternating current (AC) Year of last overhaul: 2000 EQUIPMENT C-axis Infinitely variable speed 3-jaw hydraulic-mechanical chuck Coolant system Belt filter unit Internal coolant supply

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl Dolhcdwoyfurqoxoun - Tool holder Inspection is possible at any time by prior appointment.

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Dslhcdeyft Ahewxjun Inspection is possible at any time by appointment.

Condition: good (used), Year of construction: 1963, Vertical lathe JUNGENTHAL Type: DK 1400 built in 1963 with 1 axis digital readout. turning diameter max : 1400 mm face plate : 1250 mm Automatic turret head spindle speed : 3,5-180 rpm feeds : 0,063 - 3,15 mm/rev Delhsvi Hryjcdwxeun rapid traverse : 1800 mm/min Further data see data sheet Machine documentation available . Dimensions : Length 4 m Width 2,4 m Height 3 m Weight 16t Good general condition .

Condition: used, Year of construction: 1994, turning diameter 1250 mm swing diameter 1160 mm turning height 800 mm faceplate diameter 1000 mm total power requirement 97 kW weight of the machine ca. 25000 t dimensions of the machine ca. m P I T T L E R (Germany) CNC Controlled Vertical Turning and Milling Centre With Tool Changer and Pallet Changer Model PV 1250 / 1-1 Year 1994 _____ Turning Ø max. 1,000 mm Swing Ø max. 1,160 mm Turning length 800 mm X Axis - horizontal 1,300 mm Y Axis - vertical 800 mm Feed / quick feed 16,000 mm/min Main spindle speeds 10 - 1,000 rpm ! Main spindle speeds via separate C Axis 0.1 - 16 rpm Positioning accuracy of C Axis 360° + / - 5 " Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speed 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Dujlhcdwjt Hwy Sexsn Spindle drive 63 kW Total electrical load 97 kW - 400 V - 50 Hz Weight, approx. 25,000 kg Accessories / Special Features * CNC Contouring Control Model NUM 760 TX in 3 axes, with graphics, menu-guided dialogue programming, and all the usual options, cycles and sub-programs; with tool compensation, thread cutting cycles, constant speed programming, etc. * 2-axis CNC tool slide (1,300 x 800 mm) with driven tool holders, ISA 50 / 22 kW. * Tool changer with 16 tool holders, max. length 450 mm, max. weight 40 kg. * Pallet changing system, pallet size 630 x 630 mm, with setup station with indexing and drive of the pallet, and 2 separate pallet stations. * 3 pallets, 630 x 630 mm. * 3-jaw chuck, Ø 650 mm. * Face plate, Ø 900 mm. * Chip conveyor. * Band filter coolant equipment. * Completely covered working area, including safety fence for the pallet changing area. * Separate switch cabinet. * Operating manual. * Approx. 20 tool holders. * Various other accessories. High performance universal turning and milling centre for full range of machining (turning, boring, drilling, milling, and threading) with high speeds and high turning volume. Condition : Good to very good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have a selection of modern lathes available. Please let us know your requirements

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional Dolhcdowyn Ntswxoun

Condition: ready for operation (used), VTL MORANDO KL 12 CNC Fagor 8040 Faceplate diameter: 1200 mm Swing diameter: 1400 mm Turning height: 1080 mm Dusljtvv Sqohcdwxjn Main motor: 40 kW Total power requirement: 50 kW Weight of the machine ca.: 18 t Movie underpower available