Used Vertical turret lathes - double column - faceplate diameter 2000-2999mm for sale (15)

Condition: good (used), SEDIN VTL 1525 Table diameter : 2250 mm - Maximum swing : 2500 mm - Working height : 1600 mm - Table speeds : 1,6 - 80 rpm - Main motor power : 45 kW - Weight of part on table (maximum) : 16 T - Weight of the machine : 35,5 T C93A93Y

Condition: excellent (used), Year of construction: 2007, overhauled: 2007 Control Siemens ... Sinumerik 840 D Max. Workpiece diameter ... 2500mm Table diameter ... 2240mm Max. workpiece height ... 1250mm Axis Z ... 1000mm Max. Workpiece weight ... 10000 kg Main motor power ... 55kW L x W x H 7000x4400x5500mm Machine weight ... 37900kg The machine is in good condition. Csa0Whsjh8 More information on request.

Condition: used, Year of construction: 1990, turning diameter 2400 mm faceplate diameter 2200 mm Csdlxbhtte turning height 2100 mm control SIEMENS Sinumerik 850T table load 6 t workpiece weight 17 t Tol measurements 32 Werkzeuge required space 11 x 6 x 6,3 m Crossbeam travel: 700mm Crossbeam support Travel from centre of rotation to the right: 700mm Crossbeam support Travel from centre of rotation to the left: 700mm Machine table drive Main drive power: 80kW Number of gearboxes: 2 Step change: 3.84 Speed range of the 1st gear stage: 2-32-139 rpm Speed range of the 2nd gear stage: 9-125-500 rpm Max. Machine table load: 6 tonnes Feed drive Cross beam support Horizontal feed speed: 0.1 - 8 m/min Cross beam support Vertical feed speed: 0.1 - 8 m/min Cross beam support Rapid traverse speed horizontal/vertical: 8 m/min Cross beam adjustment speed: 425 mm/min Tool system Tool system: 180.1 Cutting force on the turning tool: 30 kN

Condition: new, Year of construction: 2024, NEW MACHINE TECHNICAL DATA: Working diameter 2500mm Max. workpiece height 1600mm Max. workpiece weight 16000kg Face plate diameter 2240mm Face plate rotation speed 0-100U/min Max. torque on face plate 50000Nm Performance of main drive 75kW SETTINGS: -1/2 supports -Capto quick change system / 3-ffold steelholder -Telescopic cover -Zentral lubrication SKF/VOGEL -12 month warranty -complete electrical installation 230/400V,50Hz, Made-in-Germany, CE-Norm OPTIONS: -machine housing Y0No8Smij -chip conveyor -cooling water preparation -Turret -driven tools -... CONTROL: FAGOR/SIEMENS OTHER: Geometrie-Abnahme nach DIN8609

Condition: excellent (used), Year of construction: 2011, Operating hours: 10,000 h, Turning height: 2,500 mm, Workpiece weight (max.): 18,000 kg, Turning diameter: 2,650 mm, Working area: • Table diameter: 2500 mm • Max. turning dia: 2650 mm • Max turning height under cross rail: 2500 mm • Max cutting height: 2500 mm (Max. Distance between Table Top and Standard Turning Tool Holder with Tool) • Table load: 18000 kgs • Type of bearing for the table: Tapered roller bearing • Max. RAM stroke: 1500 mm • Max (horizontal working head) stroke: 1900 mm • Jaws: 4 • T slots (in table) Main drive: • main drive Siemens S1 = 100 kW; • table speed: 1 – 130 rpm • RAM horizontal travel (X axis): 1900 mm • RAM vertical travel Z axis: 1350 mm • RAM section: 250x250 mm Db0U9Thhp Feeding: • Digital controlled (X,Z): Siemens AC servomotors are designed for maximum use of power and torque necessary for workpiece machining process. • Alpha reducers with reduction ratio i = 4 type SPG • Accurately bearing ball screws 63 mm, pre-stressed to avoid axial backlash and deflection • Cutting speed, infinitely variable (X,Z axes): 0,001 – 6.000 mm/min • Rapid feed (X,Z axes): 9000 mm/min • No of toolholders/ magazines: 12 • Tool shank for turning: 40 x 40 mm SIEMENS 840dsl Shop Turn

Year of construction: 1990, Condition: ready for operation (used), VTL Titan SC 2500 Chuck diameter 2500 mm Max. turning diameter 2650 mm Max. work piece height 1900 mm Max. work piece weight 18000 kg Ys8D7G Main motor power 55 kw Weigth of machines aprox 39.5 to Movies underpower available

Year of construction: 2005, Condition: used, CNC Portal - Carousel lathe Manufacturer Unisign Type Uniport 6000 year of manufacture 2005 Control Siemens 840D working range X 3000mm column passage width 2500mm Y cross slide travel 2500mm clamping table 2000 x 2170mm tool holder HSK100 H0Xn3Fu

Condition: refurbished (used), We would like to take this opportunity to draw your attention to our Titan vertical lathes program from Romania. Titan manufactures new machines and offers reconditioned machines of various makes. Bizni7Apcbf

Condition: used, Year of construction: 2000, faceplate diameter 3200 mm swing diameter 3500 mm turning height 2200 mm range L-W-H 7730 x 6240 x 6700 mm control Typ 840 D sl voltage 3 x 400 V frequency 50 Hz turning speeds 0,8 - 40 U/min max. turning diameter 3500 mm total power requirement 51 kW weight of the machine ca. 86 t Technical specifications Machine type: CNC vertical lathe Manufacturer: Rafamet Year of manufacture: 1973 conventional General overhaul with control retrofit 2010 Control upgrade 2016 Control: Siemens 840 D Sl Condition: very good faceplate Turning diameter of the faceplate 3,200 mm Number of rotation stages of the face plate 3 (infinitely variable) Speed ??ranges of the faceplate 0.8 - 40 rpm Level I 0.8 – 3 rpm Level II 0.8 - 11 rpm Level III 0.8 – 40 rpm Dpo2Kf processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above the faceplate 2,200 mm vertical supports Smallest axis distance between the vertical supports 470 mm Largest ram travel of the left vertical support 985 mm Largest ram travel of the right vertical support 985 mm Axis Feeds - Infinitely variable feed Max.: X1.2 3m/min max.: z1.2 2.5 m/min Plunger cannot be pivoted Support — crossbar Rapid feed of the cross beam 600 mm/min Larger distance of the cross beam to the faceplate 2,300 mm load sizes +Permissible turning force when turning workpieces with a turning diameter of 2,000 mm and a turning speed of 20 m/min. 8,000kg +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a turning speed of 20 m/min for all supports 45 mm² +Largest chip cross-section for workpieces made of steel Fz = 50 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 2.5 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a turning speed of 20 m/min for all supports 120 mm² +Largest chip cross-section for cast iron workpieces HB = 160 kg/mm² at a rotation speed of 20 m/min for a vertical support with max. plunger length 985 mm 22.5 mm² +Largest permitted workpiece weight at 0.8 - 3.15 rpm 17,500 kg +Largest permitted workpiece weight at 4 - 40 rpm 7,500 kg electric motors Main drive motor power and revolutions 51 kW Power of the feed motors of: - Vertical support beam (2 pieces) 16 Nm (gear 1:10) - Tappet (2 pieces) 16 Nm (gear 1:12) Power and revolutions of the drive motor of the hydraulic pumps (2 pieces) 3kW - 1,500 rpm Power and revolutions of the clamp hydraulic motor of the vertical support beam 1.5 kW - 1,500 rpm Power and rotation for crossbar adjustment 15 kW - 1500 rpm 3.5 Information on the compressed air supply and other consumables Compressed air connection: 6 bar free of oil and water 3.6 Energy Consumption Conditions Voltage: 3 x 400V Control Voltage: 24V Frequency: 50Hz Fusing: 315 A Main dimensions and weight of the machine Length 7,730mm Width 6,240mm Height: 6,700mm Weight: 85,750 kg Tool: Capto 60 recording Not powered front panel Turning diameter of the front plate 3,200 mm Clamping disc diameter 3,400 mm Number of rotation levels of the front panel 3 (continuously adjustable) Front panel speed ranges 0.8 - 40 rpm Level I 0.8 - 3 rpm Level II 0.8 - 11 rpm Level III 0.8 - 40 rpm processing of workpieces Max. turning diameter 3,500 mm Max. turning height of the workpieces above ...

Condition: new, Year of construction: 2024, Machine NEW! Geometry acceptance according to DIN8609 Warranty 12 months for all damages Control:conventional/SPS Siemens faceplate control 4-axis digital display Fa.Fagor/ACU-RITE or Heidenhain complete electrical equipment 230/400V,50Hz,german make,CE-Norm Technical data: Max. Workpiece dimensions: - Diameter mm 3200 - Height mm 1600(up to 2600 possible*) Max. Workpiece weight kg 16000 Face plate diameter mm 2800 Max. stroke length - horizontal mm 1720 - vertical mm 1200 Number of stages of faceplate rotation 18 Face plate speeds PLC Siemens or stepless(2 steps) Lenze control rpm 1,6-63/0-80 Support working feed number of steps 18 Speed of cross beam adjustment mm/min. 360 Max. Support line adjustment speed mm/min. 2000 Lxvsl Max. Faceplate torque kN/m 67 Main drive power kW 55/75 Dimensions (LxWxH) mm 5490x7075x5100 Weight kg 43.000

Year of construction: 1989, Condition: good (used), Functionality: fully functional, TECHNICAL DETAILS Swing diameter: up to 2800 mm face plate diameter: 2500 mm height under crossbeam: max. 2200 mm workpiece weight: max. 15.000 kg Support: 2 x vertical, 1 horizontal MACHINE DETAILS main drive: approx. 55 kW Kvethpava Total weight: approx. 56 t

Condition: ready for operation (used), Year of construction: 1984, VTL Titan SC 2000 Chuck diameter 2000 mm Max. turning diameter 2150 mm Max. work piece height 1600 mm Max. work piece weight 15000 kg Main motor power 55 kw B9T8O70D Weigth of machines aprox 31.5 to

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm workpiece weight Max. 35 t Power 80 PS turning speeds 125-500-1500 U/min DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) Dpo2Tr 1 turning ram: 1400mm stroke

Year of construction: 1989, Condition: good (used), VTL SC 27 CNC Chuck diameter 2500 mm 0Xaig Max turning 2700 mm Max heigth for piece 2300mm Weigth of piece 18.000 kg Weigth of machine around 40 to

Condition: ready for operation (used), Year of construction: 1983, SEDIN VTL 1525 Catcwf73T Table diameter : 2250 mm - Maximum swing : 2500 mm - Working height : 1600 mm - Table speeds : 1,6 - 80 rpm - Main motor power : 45 kW - Weight of part on table (maximum) : 16 To - Weight of the machine : 35,5 T -Movie available