Condition: excellent (used), New 2008 Swing over bed - 600 (Ø 23.62) Diameter × length - Ø 300 × 600 (Ø 11.81 × 23.62) Max. diameter - Ø 380 (Ø 14.96) Max. travel range of Z/X axis - 600 / 240 (23.62 / 9.44); Z-axis: FANUC 2.8 kW (4 HP) /3000 rpm; X-axis: FANUC 2.8 kW (4 HP) /3000 rpm Diameter of spindle bore/Draw bar bore - STD: Ø 77 / Ø 52 (Ø 3.03 / Ø 2.04); OPT: Ø 86 / Ø 77 (Ø 3.38 / Ø 3.03) Spindle speed - STD: 8” chuck 3500 rpm; OPT: 8” chuck 4500 rpm, 10” chuck 3500 rpm Dolit Tiorfx Tns Hokl Chuck diameter - STD: Ø 8” ; OPT: Ø 10” Hydraulic Tailstock – travel 465 (18.3) MT. No.4 VDI Tool stations - OPT: 8 STD: 10 Coolant Chip conveyor Power requirement - 208-220 volts / 100 Amps / 3 Phases / 60 Cycles Floor area (L × W × H) - 4080 ×1675 × 1842 (160.62 × 65.94 × 72.51) Gross weight (approx.) - 5200 kg (11440 Ibs)

Condition: ready for operation (used), Year of construction: 1997, General Data Measurements width 4500 mm Measurements depth 2900 mm Measurements height 3428 mm Machine weight 14000 kg Main Drive Number of axis 4 Movement X-Axis Movement 630 Y-Axis Movement 600 Z-Axis Movement 650 Additional Equipment Tool Storage: 40 pcs This 4-axis MORI SEIKI SH-50 was manufactured in 1997. A reliable horizontal machining centre, it offers robust construction and precision engineering. Ideal for complex machining tasks, this unit has maintained consistent performance over the years. Consider the opportunity to buy this MORI SEIKI SH-50 horizontal machining centre. Contact us for more information. Dslswh A S Soit Ti Hskl Application Types Milling

Condition: used, Year of construction: 1982, Functionality: fully functional, Giddings and Lewis A110RT Horizontal Boring and milling machine with G&L CNC 8000 control system. Dslitovk D Die Ti Hokl serial number 150-1588 Year 1982 Spindle diameter 4" Table size 72"x48" X axis 60" Y axis 70" Z axis (spindle) 36" W axis 28" Equipped with:- Removable Power rotary table 600mm, Davis CH8 facing and contouring head.

Condition: used, Year of construction: 2008, Table size 700 x 500 mm X/Y/Z - 600/500/500 mm Spindle speeds 10000rpm Spindle taper ISO 40 No. of stations in tool changer 20 Table load 500 kg Control: Fanuc 0i-MC Dsliowigfrot Ti Hekl Equipped with: 20 pcs tool holders

Condition: good (used), Year of construction: 1960, Hand screw press, mandrel press, screw press, hand screw press, printing press, balance printing press, 2-column press, column screw press -Manufacturer: Ageo, manual column screw press type 28/510N with solid base frame -Printing capacity: max. 28 tons -Stroke: 315mm -Intermediate size: 510 mm -Table size: 400 x 510 mm, groove width 22 mm -Pitch: 48 mm/rev. Delijrgbvyot Ti Hekl -Dimensions: Ø 1600 x H2040 mm -Total weight: 1024 kg

Condition: excellent (used), Fries Research & Technology Device name: FRT MicroProf® MPR 1250 The FRT MicroProf® MPR 1250 is a high-precision surface metrology system from the MicroProf® series from Fries Research & Technology GmbH (FRT). These systems are designed for the non-destructive and non-contact analysis of surface parameters such as topography, roughness, coating thickness, and more. Features of the FRT MicroProf: Measurement modes: The device operates both as a 2D optical profilometer and as a 3D imaging system. A scanning method or a direct imaging sensor is used. Measurement range: Height range: Up to 3 mm, depending on the sensor used. Lateral resolution: Typically 1–2 µm, depending on the sensor configuration. Technical features: Modular multi-sensor design: Allows the combination of different sensors for different measurement tasks. High resolution: Offers measurements in the sub-nanometer range. Flexibility: Can be used for various applications in the semiconductor industry, microsystems technology, optics, automotive industry, and photovoltaics. Automation: Supports fully automated measurements for high throughput rates. Areas of Application The MicroProf® MPR 1250 is used in various industries, including: Semiconductor industry: For the analysis of wafers and microchips. Microsystems technology (MEMS): For the investigation of microstructures. Optics: For the measurement of surfaces in optical components. Automotive industry: For checking component tolerances. Dkoljwh Swdjit Ti Hsl Photovoltaics: For the analysis of solar modules. Weight approx. 500 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: good (used), Gap Bed machine 28” Between centers: 80” Swing over bed: 17" Swing over the saddle 10 ½” Spindle speeds: 20 - 2000RPM Vari speed Spindle bore: 3 ½” Diameter Chuck mounting: D1 - 8 Tailstock taper: No 6 Morse Execution: imperial Metric & Imperial screw cutting Tool Post: Quick Change 4 holders Used 3 and 4 Jaw Chucks Fixed steady Coolant, swarf tray and chuck guard Dolit Tijnr Nl Sj Hskl

Condition: good (used), Year of construction: 1998, CNC Vertical Machining Center MORI SEIKI SV500-50, Year 1998, Fanuc MSC-518 Control Dkjlijwifzlet Ti Hsl With pallet changer. Table: 1100x600mm BT50 spindle mount, 40-position magazine. Spindle speeds up to 6,000 rpm Travels: X800, Y510, Z510, Rapid traverse 32 m/min Machine without magnetic chipboard. Complete machine documentation available.

Condition: ready for operation (used), Giddings and Lewis G50 Horizontal Boring and milling machine with G&L CNC 8000 control system. Djlitovkwbue Ti Hjkl serial number 450-1190 Year 1989 Spindle diameter 5" Table size 96"x48" X axis 96" Y axis 80" Z axis (spindle) 36" W axis 73" Equipped with:- Removable Airlift rotary table 4' x 3', Davis CH26 facing and contouring head. External guarding

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Wasino GLS-130AS 1984 Djlit Tijp R Rm Is Hjkl

Condition: good (used), Gauge block box, gauge blocks, gauge block boxes, parallel gauge block set -Manufacturer: Carl Mahr, gauge block set of parallel gauge blocks, 46 pieces -Final dimensions: 1.0 - 100 mm -Measurement accuracy: Accuracy grade I Dslok Hdr Eeit Ti Hjkl -Dimensions box: 370/120/H60 mm -Weight: 2.8 kg

Condition: used, Trumpf Type: TruDisk 4002 / W20.HL29 Trumpf TruDisk 4002 laser beam source with KLH cooler The Trumpf TruDisk 4002 laser beam source is an industrial disk laser source (disk laser) from TRUMPF, characterized by high power, beam quality, and efficiency. It is frequently used for welding, cutting, and other material processing applications. Maintenance has been performed regularly. Unit consisting of a beam source with associated cooler, but without optics and fiber optic cable. Technical Specifications Laser power: 4,000 watts (4 kW) (minimum 80 W) Wavelength: ~1030 nm (infrared range) (Yb:YAG) Beam quality (BPP): typically ≤ 8 mm mrad Fiber connection: TruDisk lasers usually have multiple fiber connections Cooling: Water-cooled – via a KLH cooler Dimensions: 1.0 x 2.0 x H1.6 m (laser) + 1.0 x 1.5 x 1.8 m (cooler) 380 V -10% ... 460 V +10%, 3AC + PE 23 kW / 25 kV A - 34 A / 400 V 50 ... 60 Hz KLH cooler: The KLH cooler is an industrial liquid cooler that ensures heat dissipation from high-performance laser systems such as the TruDisk 4002. Dkslowh Rnzsit Ti Hel Typical Features: Water-to-water cooling Precise temperature control (typically 20–25°C) Refrigerant: R 404A Can be controlled via TRUMPF interface Required to comply with laser specifications Device Type W20.HL29 Weight: 850 kg (laser) + estimated 550 kg (cooler) Condition: Used Scope of delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions over the phone.

Year of construction: 2004, Condition: excellent (used), Year: 2004 X axis:50″ Y axis:26″ Z axis:25″ Motor Power:40 hp Spindle speed Rpm:7500 RPM Djlijh Uqkyet Ti Hekl Atc: 24 Spindle Taper: CT 40 Table width: 23″ Table length: 52″ Swarf auger Coolant tank 4th axis

Condition: used, Year of construction: 1991, total height: 2,680 mm, total length: 4,500 mm, total width: 2,150 mm, Empty weight: 4.000 kg - Year: 1991 - Documentation available: Yes - Motor power: 15.0kW - Turning diameter: 360mm - Center distance: 805mm - Max. spindle speed: 4200rpm - Bore diameter: 80mm - Removable bed: Yes Dslowhx E Uoit Ti Hekl - Turning diameter removable bed: 600mm - Digital: No - Transport dimensions: 4500mm x 2150mm x 2680mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1988, Functionality: fully functional, Giddings and Lewis PC50 Horizontal Boring and milling machine with G&L CNC 8000 control system. serial number 445-1030 Year 1988 Spindle diameter 5" Table size 72"x48" X axis 72" Y axis 62" Dkslit Tijvk Eg Es Hjl Z axis (spindle) 36" W axis 64" Equipped with:-Airlift rotary table 3'x3', Davis CH16 facing and contouring head.

Condition: used, Year of construction: 1990, Hydraulic Guillotine Shear Manufactured by ATLANTIC, Type ATS 3012 Year of Manufacture: 1990 Technical Specifications Manufactured by ATLANTIC Type ATS 3012 Year of Manufacture: 1990 Sheet Size: 3000 x 12 mm Cutting Angle Adjustment: 0.5 – 3 degrees Number of Hold-Down Clamps: 18 Length of Angle Stop: 1000 mm Working Height: 900 mm Dslit Tiowif I Ej Hskl Motor Power: 22.5 kW Dimensions: Approx. L 4.20 x W 2.00 x H 2.20 m Weight: Approx. 8 t Features • Angle Stop • Manual Cutting Gap Adjustment • Automatic Cutting Angle Adjustment • Motorized Backgauge with Fine Adjustment All information is subject to change without notice. A demonstration is available at any time in our showroom.

Condition: excellent (used), Year of construction: 1998, Hardinge HXL-S CNC Lathe Dkslior Nc Etst Ti Hol Fagor Control Year 1998 Manuals Great Condition - Fully Working with no faults. We welcome any inspections

Condition: excellent (used), New 2006 Brother CNC-B00 Control Pallet Change time 3.4 seconds Pallet Size 600 x 425mm Dslit Tijrfxr Us Hjkl X axis 550mm Y axis 400mm Z axis 415mm Spindle speed 12000rpm 40 Station ATC BT30

Condition: used, Year of construction: 1999, total height: 2,100 mm, total length: 4,500 mm, total width: 2,450 mm, Empty weight: 2.550 kg Travel: 500x350x300mm Max. workpiece: 1050x800x295mm / 800kg Dolit Tiowhxp Hs Hskl With a lot of belogings - Year: 1999 - Documentation available: Yes - CE mark available: Yes - Serial number: 58k20365 - Control: CNC - Transport dimensions: 4500mm x 2450mm x 2100mm (l x w x h) - Transport weight [kg]: 2550kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2007, operating hours: 15,000 h, Functionality: fully functional, USED YOU-JI YV1000 ATC 2-axis CNC VTL - YOM 12/2014 – SERIAL NUMBER 07V10T1566 TABLE Table Diameter 1000 MM Table Speed (2 gears) 2 ~ 850 RPM Max. Table Torque 10000 Nm CAPACITY Maximum Swing Ø 1150 MM Maximum Turning Diameter Ø 1100 MM Maximum Turning Height 800 MM Maximum Load on Table 4000 KGS TRAVEL X-Axis Travel (Saddle Horizontal) 820 MM Z-Axis Travel (Ram Vertical) 800 MM Vertical Travel of Crossrail 500 MM FEEDRATE X-Axis Rapid Traverse 20 M / MIN Z-Axis Rapid Traverse 20 M / MIN Cutting Feedrate 0.001 ~ 500 MM / REV Manual Feedrate 0 ~ 1260 MM / MIN ATC / TOOLING ATC Capacity 12 Stations Tool Shank Type BT50 Dkjlit Tievnclye Hol MOTORS Main Spindle Motor (30 Mins / Cont.) 30.0 / 37.0 KW X-Axis Servo Motor 3.8 KW Z-Axis Servo Motor 3.8 KW Coolant Pump Motor 0.18 KW TANK CAPACITIES Hydraulic Tank 65 L Coolant Tank 300 L Gearbox Lubrication Tank 50 L Slideway Lubrication Tank 4 L POWER SOURCES Input Power Supply 415V / 50HZ / 3PH Power Capacity 80 KVA DIMENSIONS & WEIGHT Floor Space including swarf conveyor & walk round space 5442 x 5999 MM Machine Weight 16,000 KGS ADDITIONAL FEATURES & OPTIONS  Tooling Package  Transformer  Swarf Conveyor  Air and washdown guns  Operators Platform  3 jaw hydraulic chuck & hard jaws  15000 Hours of Actual Cutting Time

Condition: used, Year of construction: 2011, Plasma cutting machine Fab. MicroStep type. SPL-PRA 7501.30 Year of manufacture 2011 Technical specifications Manufacturer: MicroStep Year of manufacture 2011 Model: SPL-PRA 7501.30 Working area length: 7500 mm Working area width: 3000 mm Equipment • MicroStep CNC control iMSNC Connection voltage: 400V, 3-phase, 50 Hz Max. connected load: 6 kW Fuse protection: 16 A • Plasma source: Kjellberg HiFocus 360i Continuously adjustable: from 10 to 360 A Duty cycle: 100% at 360 A Connection voltage: 400V, 3-phase, 50 Hz Fuse protection: T 125 A Max. connected load: 87 kVA Dimensions: 1030 x 680 x 1450 mm Weight: 517 kg • Kjellberg KWE 360 cooling water unit Connection voltage: 400 V, 3 Ph, 50 Hz Dkjlitswif Ixs Ti Hsl Fuse: T 10 A Max. connected load: 1.75 kVA Coolant: Kjellfrost -15/-25 Dimensions: 670 x 680 x 1060 mm Weight: 103 kg • Oscillating conveyor table • Connection voltage: 400 V, 3 Ph, 50 Hz The extraction table is not included in the scope of delivery. All information is provided without guarantee. A demonstration is available at any time in our showroom.

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Volume: 220L Sleeve-diameter: 250mm Diameter: 1190mm Dkolit Tewhxnisi Hol Input-height: 1070mm Output-height: 645mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40078/07 - Control: Conventional - Motor power: 3.0kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: excellent (used), Year of construction: 2014, USED HANKOOK VTC140E – YOM 2014 – Serial Number 44L09842 - TWW Cat 7962 MACHINE CONSTRUCTION & FEATURES • Ram Type Vertical Boring & Turning Machine with C-Axis & Driven Tools. • Heavy-Duty Cast-Iron Bed Construction for High Accuracy & Rigidity. • Heavy Duty Hardened & Ground Slideways to Provide Increased Stability & Rigidity. • 2 Step Automatic Gear Change. • 24 Position Tool Magazine. INCLUDED FACTORY FITTED MACHINE OPTIONS • Chip Conveyor & Chip Bucket • 30 Bar Through Spindle Coolant System • Measurement System C-Axis Scale • Transformer • Hydraulic 3-Jaw & Manual 4-Jaw Combination Chuck With4 Manual Adjustable Jaw Bodies • Automatic Tool Setting Device TOOLING INCLUDED • DINE Tool-changeable Angular Milling Head with 40 ISO Output • 2 Off Sandvik Capto C6 Turning Toolholders with Two Outputs (V & H) • 1 Off Sandvik Capto C6 Axial Turning Head • 7 OFF BT50 Driven Toolholders • 1 Off Hankook TA12B4121015043 • 1 OFF Hankook TA12B412015142 • 1 Off Hankook TA12410000161 • 2 OFF Hankook TA12417010160 CAPACITY Maximum Turning Diameter - Ø 1,600 mm Maximum Turning Height - 1,400 mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,400 mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - Automatic 2 Step TABLE C-AXIS Minimum Index Angle - 0.001° C-Axis Cutting Feedrate - 0 ~ 1,200 Deg / Min Max. C-Axis Speed - 3.333 RPM RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220 x 220 mm MILLING SPINDLE Milling Spindle Speed - 30 ~ 3,000 RPM Max. Milling Spindle Torque - 235 Nm TRAVEL & FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,600 mm Z-Axis Travel (Ram Vertical) - 900 mm Maximum X / Z-Axis Cutting Feedrate - 7,500 mm / Min X / Z-Axis Rapid Feedrate - 7,500 mm / Min ATC Type of Tool Holder - MAS BT 50 Tool Magazine Capacity - 24 (12T & 12M) Max. Tool Weight - 50.0 KGS MOTOR Table Motor (Cont. / 30 Min) - AC 37.0 / 45.0 kW Milling Spindle Motor Power - 15.0 / 18.5 kW X / Z-Axis Servo Motor - AC 7.0 kW C-Axis Motor - 7.0 kW POWER SOURCE Input Power Supply - 415V / 50HZ / 3PH Power Capacity - 80 KVA DIMENSIONS & WEIGHT Height - 5,535 mm External Width (With Chip Conveyor) - 6,760 mm External Depth - 4,565 mm Weight - 25,800 kg STANDARD SUPPLIED MACHINE FEATURES • Fanuc 32iA Control System • Through Tool Coolant • Table, Servo Drives & Motors • Through Spindle Coolant • 4 Jaw Independent Manual Chuck • Splash Guard & Safety Guard Rail • Automatic Tool Change System • X-Axis Slideway Protect Steel Cover • Lubrication Oil Cooler • Work Light • Hydraulic Power Unit • Levelling Blocks • Patrol Lamp (Red, Yellow & Green) Dslijuu Rz Sot Ti Hjkl • Automatic Guideway Lubrication System • NC Power Off • Coolant System & Wash Gun • Chip Pan • Electrical & Mechanical Manuals

Condition: used, total height: 1,400 mm, total length: 600 mm, total width: 600 mm, outer dimension length: 600 mm, Empty weight: 200 kg Dkolitjwhxfne Ti Hel - Documentation available: No - Grinding diameter: 32mm - Transport dimensions: 600mm x 600mm x 1400mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 2007, total height: 1,000 mm, total length: 1,400 mm, total width: 1,300 mm, outer dimension length: 1,400 mm, outer dimension width: 1,300 mm, Empty weight: 300 kg Max. workpiece: 80mm Sleeve-diameter: 250mm Djlowhxfhoit Ti Hokl Input-height: 860mm Output-height: 830mm - Year: 2007 - Documentation available: No - CE mark available: Yes - Serial number: 40080/70 - Control: Conventional - Motor power: 0.8kW - Transport dimensions: 1400mm x 1300mm x 1000mm (l x w x h) - Transport weight [kg]: 300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren