Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 600 mm, overall weight: 700 kg, Combined Setting, Shrinking, and Measuring Device Note: On May 30, 2022, the machine was inspected by a technician from ZOLLER. Shrinking is currently not possible. The induction coil and the control unit would need to be replaced. TECHNICAL DETAILS Measuring Ranges Measuring range X-axis: 300 mm Measuring range Y-axis: 250 mm Measuring range Z-axis: 600 mm Process Times Cooling time: max. 40 s Setting, shrinking, and inspection measuring time including cooling: max. 2 min MACHINE DETAILS Control System Control type: CNC Software: Saturn 1 Measuring system: ZOLLER Multivision II Fsdpfjzqcvasx Ahajgf Dimensions & Weight Machine dimensions (L x W x H): 2,600 mm × 1,400 mm × 1,900 mm Machine weight: 700 kg Coolant tank dimensions (L x W x H): 800 mm × 600 mm × 920 mm EQUIPMENT Automatic length stop system in the Z-axis for setting and shrinking to the target dimension Inspection measurement after the shrinking process Induction coil with tailstock (requires replacement) Cooling system with water cooling Automatic length stop system in the Z-axis CNC control Software Saturn 1 ZOLLER Multivision II Note: Tool holders or extension holders are not included.

Condition: used, machine/vehicle number: 684, Load capacity: 1000 kg Fedpfxsdqw R Ro Ahasgf Graduation reading: 100 g Platform size: 1250 x 950 mm Platform height above floor: 230 mm Platform height with elevation from the underbody: 540 mm Space required: 1250 x 1160/1250 x 1900/2180 mm Weight: 270 kg

Condition: good (used), Year of construction: 2006, voltage 110 - 230 V frequency 50 - 60 Hz Power connection 0,5 kVA weight 150 kg dimensions of the machine ca. 1,0 x 0,8 x 1,75 m Stick blade profile control unit - Control via PC control with Windows XP operating system - Digital drive amplifiers, linear motors and measuring systems - Fully automatic position determination of the cutting edges and axis position of the stick blade - Measurement of almost all single-part and continuous processes required for spiral bevel gears and hypoid gears - Machine concept designed for the shortest set-up and changeover lines and Fjdpfx Asymfz Sehaogf maximum measuring accuracy - Combination probe for measuring tip and surface measurement - Integrated drawer for accessories - Keyboard integrated in flat drawer - Operating elements and PC protected against unauthorized access with lockable cabinet element

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the Fgedpow N S E Ajfx Ahaof the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Year of construction: 2017, condition: like new (used), Used industrial X-ray system Manufacturer: VisiConsult Type: XRH 222-S Year of manufacture: 2017 X-ray voltage: 225 kV Equipment: CT and ADR expansion Workpiece dimensions: max. 650 × 860 mm Fjdpfezttg Ijx Ahasgf Workpiece weight: max. 120 kg The system is designed for industrial X-ray inspection and features CT and ADR functionality. Further technical data and information available upon request.

Condition: used, Year of construction: 2000, length 2750 mm width 1400 mm height 340 mm total power requirement 0 kW weight of the machine ca. 3 t dimensions of the machine ca. 2750 x 1400 x 340 mm Marble table as a surface plate. It was the bottom part of a Zeiss measuring Fodpeznnd Rsfx Ahaegf machine. Size is 2750 x 1400 x 340 mm.

Condition: good (used), weight of the machine ca. 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 550 mm Table diameter: 260 mm Fsdpszidz Uofx Ahajgf Base circle diameter: 0–630 mm Maximum rolling path: ±115 mm Maximum workpiece weight: 300 kg X-axis: 230 mm Y-axis: 370 mm Z-axis: 500 mm Max. workpiece diameter: 630 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 1992, weight 5,5 t Table tip diameter: 35 mm Tip height above table: 75 mm Counterholder tip diameter: 50 mm Counterholder tip stroke: 40 mm Minimum center-to-center distance: 20 mm Minimum measuring height above table: 50 mm Maximum measuring height above table: 800 mm Table diameter: 500 mm Base circle diameter: 0–1000 mm Maximum rolling path: ±115 mm Fjdjzidz Ijpfx Ahajgf Maximum workpiece weight: 2000 kg X-axis: 230 mm Y-axis: 530 mm Z-axis: 750 mm Max. workpiece diameter: 1000 mm Software for new PCs: Windows 11 Bevel gear software, if desired, available only on Metrotek installations Additional information: - Machine calibrated according to DAKKS on November 19, 2017

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 649709052, overall weight: 500 kg, total height: 1,800 mm, total width: 750 mm, total length: 800 mm, REICHERTER STIEFELMAYER UH 250 Hardness Testing Machine - Diameter of the support surface: approx. 50 mm - Includes digital display Fsdoztwu Nepfx Ahasgf - Includes table booklet for hardness tests - With workbench, table dimensions: 700 x 700 mm FCA D-73235 Weilheim Teck - loaded onto a truck

Year of construction: 2019, condition: excellent (used), Image-guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 series Year of manufacture: 2019 Control system: Keyence Technical data: ----- • Camera chip: 4 MP CMOS • Measuring range: 600 x 300 x 200 mm • Smallest display unit: 1 µm • Smallest angle: 0.0001° • Repeatability (locked): ±3 µm • Maximum table load: 25 kg • Display: 15" TFT • Weight: 40 kg Accessories: ----- Fgodjih R Uxopfx Ahaof • Manuals • As-delivered condition (Datasheet attached)

Condition: used, Year of construction: 2009, measuring range X-axis 0 - 160 mm measuring range Z-axis 0 - 300 mm tool adaptor SK 40 / BT 40 Resolution 0,001 mm Ambinent temperature 0 - 45 °C dimensions of the machine ca. 0,60 x 0,50 x 0,85 m weight ca. 60 kg Tool Presetter PWB - Tool Master 10 Fgodpfozrzqfsx Ahaef - incl. Measuring Electronics TC100

Year of construction: 2015, condition: used, machine/vehicle number: 192254 / 192260, Footprint: approx. 10x6 m, measuring range: approx. 8x3 m, 2 measuring stands, height: approx. 350 cm, calibrated: 04/2024, various measuring tools, with accessories. Fodpfx Ahszqy R Ioaogf

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Fsdpfxszrvg Uj Ahaogf Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Year of construction: 2023, condition: ready for operation (used), overall weight: 980 kg, Optical measurement machine manufactured in 2023. This VISCOM S3016 features a maximum PCB dimension capacity of up to 430 mm x 610 mm and includes an uninterruptible power supply. It is equipped with 4 orthogonal cameras and offers high-resolution inspection capabilities. If you are looking to get high-quality inspection capabilities, consider the VISCOM S3016 optical measurement machine we have for sale. Contact us for further details. Fgsdpfjzqbkiox Ahasf - System Function: Individual inspection from below with automatic track width adjustment; well-suited for inspecting THT solder joints- Max. PCB Dimensions: Up to L 430 mm x W 610 mm- System Computer: MS Windows operating system (presumably Windows 10)- Power Supply / UPS: Uninterruptible power supply included- Software: SI inspection software- Sensor Specifications: 8M-4SRW- Inspection Dimensions: 2D resolution- Camera Configuration: 4 orthogonal cameras- Illumination: Red illumination- Resolution (Standard Mode): 23.4 µm/pixel- Resolution (High-Resolution): 11 µm/pixel- Hardware Extensions: Traffic light extension to 2,500- Power Consumption: 2500 W- Supply Voltage: Y400V 3P/N/PE AC, 50 Hz- Control Voltage: 24 V- Pneumatic Operating Pressure (P/min-max): 4 - 6 bar- Sound Level: < 70 dBA

Year of construction: 2008, condition: ready for operation (used), number of axes: 3, This 3-axis TESA Visio 300 was manufactured in 2008, but is like new, has never been in use. It features an X-axis travel of 300 mm, Y-axis travel of 200 mm, and Z-axis travel of 150 mm. The machine includes a precision vice and a glass stage plate, enhancing its measurement capabilities. If you are looking to get high-quality optical measurement capabilities, consider the TESA Visio 300 machine we have for sale. Contact us for further details. • machine is like new, has never been in use • Voltage: 110 / 240 V • Frequency: 50 / 60 Hz • Software: TESAVista 1.4 (Application Software) Fgedpfx Ahey N Am Eeajf • Manuals: Includes "Manuel & DCC Version" binder • Travel: X 300 mm, Y 200 mm, Z 150 mm Additional equipment • Maxell 2HD Floppy Disk (System/Data) • RÖHM "Praezisions-Spanner" PL-60G (Precision Vice) • Demo piece • Glass stage plate • monitor is included

Condition: excellent (used), Year of construction: 2006, Precitool Preciset 600 tool presetting machine Year of manufacture: 2006 HSK100 Fgodpfx Ahoztmd Toaef

Condition: used, TECHNICAL DETAILS screen Ø : 300 [mm] EQUIPMENT Fgodpfxjuhb Nlj Ahaef - 3 objectives (10x, 20x, 50x) - 2 axis display

Condition: used, TECHNICAL DETAILS - Active digital viewer, number of axis : 2 - Axis : X/Z - Tool holder orientation : 360 [°] - Machine's weight : 90 [Kg] - Overall dimensions machine : 800 x 650 x 1000 [mm] - Projector : 20 [x] - Tool holder : ISO 70 - Power supply : 230 [V] - Pneumatic : 4 - 6 [bar] - Frequency : 50 / 60 [Hz] Fjdouhb Sgspfx Ahaogf - Tolerance : -10 - +6 [%]

Condition: used, Other GARANT MM1300 CNC Fsdpfex Tvi Uex Ahasgf

Condition: used, TECHNICAL DETAILS - Tool holder : HSK 40 - measuring range Z : 250 [mm] - measuring range X : 300 [mm] - swiveling diameter : 240 [mm] Fgjdpeuhb Smefx Ahajf - max. tool weight : 20 [kg]

Condition: used, Three Dimension Coordinate Measuring Machine MITUTOYO Crysta-Apex S574 Fgjdpfey Ufkkex Ahasf

Condition: used, TECHNICAL DETAILS - Tool length : 400 [mm] Fgedpfx Aheuhb Stjaef - Max. tool diameter : 400 [mm] - Supply voltage : 230 [V] - ISO 50 taper spindle

Condition: used, TECHNICAL DETAILS - Ø screen : 600 [mm] - Strokes (X/Y) : 200 / 100 [mm] - Magnification : 10X, 20x, 50x, 100x Fsdpfx Ajuhb Nfjhaogf - power max : 1 [kW] - floor space (L x D x H) : 1100 x 1720 x 2100 [mm] - weight : about 400 [kg]

Condition: used, TECHNICAL DETAILS - Brinell tests 3000 Kg and 750 Kg, HB according to DIN EN ISO 6506-01 - Test height with table : 0 - 610 [mm] - Test height without table : 370 - 1.120 [mm] - Clamping surface on table : 500 x 600 [mm] - Clamping surface on sole : 810 x 1.425 [mm] - Reach : 310 - 1.095 [mm] - Arm swiveling : 220 [°] - Test group swiveling around its axis : 180 [°] - Vertical stroke of the test group : 750 [mm] - Floor space (except hydraulic unit) : 810 x 2.155 [mm] - Height : 3.500 [mm] - Weight : 4.000 [kg] - Voltage : 3x 400 [V] - Frequency : 50/60 [Hz] - Installed power : 3,5 [kVA] EQUIPMENT - Control panel : Stiefelmayer - Optical measuring system : Zeiss - Measuring electronics HM-Control - 2 measuring rules of imprint size : Heidenhain - Warning lights : good / outside the tolerance range - Statistic function - Exit for PV printing Fodpfx Ahouhb Iusaegf - Table - Hydraulic unit

Condition: used, TECHNICAL DETAILS Fedpfxjuhb I Io Ahaogf - Durometer for production line control of soft rubber and elastomers and all natural rubber products.