Used Isal Pb70 Et for sale (7,307)

Condition: excellent (used), Here, we offer an ETSYSTEM electronic load with GPIB interface. 32615A AC & DC Electronic Load GPIB/RS232, 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, offering an ideal test solution for UPS, AVR, and DC/AC inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series features its own control and display panel and a 5-status recall/memory storage, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. The integrated GO/NG measurement device test function provides a quick diagnosis of test results for production and QC test throughput. Features: Voltage, current, power, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory storage. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Itsdpfxszd Uh Io Adreh Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit display for voltage, current, power, and VA. Suitable for sine, square, and step waves. Width 600 mm, Height 1506 mm, Depth 600 mm 196 kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, axle configuration: 3 axles, color: other, Year of construction: 2015, Empty weight: 5.420 kg Axle 1: left 10 mm right 10 mm Iedoza D A Ujpfx Adrjth Axle 2: left 12 mm right 12 mm Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Year of construction: 2017, condition: excellent (used), SCAIME bag pourer with Donaldson stainless steel filter Year: 2017 Itedpfx Adjrfzdlorsh

Condition: used, functionality: fully functional, Equipment: CE marking, Complete BARMAC 200 vertical shaft crusher consisting of a machine frame and discharge chute, electric motor, electrical control panel, and operator panel. GRAVIPAC 1000 vertical shaft crusher consisting of a complete frame, machine, motor, pulley, and belt. Itedpfx Asx Th Euedreh

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: RET0600 0001, discharge height: 2,600 mm, power: 0.8 kW (1.09 HP), fuel type: electric, Equipment: type plate available, Bin tipping chassis: - 600 kg bin - 2.6 m dump height Itodpfx Ajv Tlf Tedreh - equipped with a hydraulic pump - CE material

Condition: excellent (used), Cutting height 42cm-56cm Cutting width 20cm-40cm Iodpfx Adev Euraoroth Engine 20 HP Belt width 110mm Belt length 6520mm

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P1065-22-A-01, controller model: Siemens SPS S7, wall material: stainless steel, cooling capacity: 180 kW (244.73 HP), nominal flow rate: 16,500 m³/h, product height (max.): 150 mm, The new price of the machine was €650,000! TECHNICAL DETAILS Capacity (for rolls weighing approx. 60 g): 10,000 - 15,000 pieces/hour Layout: 180° layout Levels: 17.5 Free product height: approx. 150 mm Level spacing: approx. 216 mm Total cooling capacity: approx. 180 kW Total power consumption: approx. 70 kW Power connection: 400 / 230 V, 3 phases, 50 Hz Refrigerant: R717 Refrigerant supply: NH3 pump operation Ambient temperature: above 10 °C Belt system Belt guidance: from bottom to top Infeed height: approx. 8,500 mm / 500 mm outside the cell wall Outfeed height: approx. 4,728 mm / 400 mm outside the cell wall Belt type: Stainless steel transverse belt with side edges on both sides Belt mesh: 12.7 x 27.43 mm Wire thickness: 1.4 mm Belt width: approx. 762 mm Usable belt width: approx. 700 mm Usable belt length: approx. 300 m Belt length including infeed and outfeed: approx. 320 m Housing Housing length: approx. 8,700 mm Housing width: approx. 6,920 mm Housing height: approx. 5,200 mm Insulation thickness: approx. 140 mm Plastic elements: approx. 2,600 mm Width of operator walkway: approx. 1,500 mm Evaporators Number of evaporators: 4 units Evaporator capacity: approx. 60 kW each Air flow: vertically drawing, 45° upwards Air temperature: approx. -32 °C Evaporation temperature: approx. -40 °C Defrosting: manually with air or hot gas Evaporator surface: 311 m² each Air volume: 16,500 m³/h each Fans: 4 units per evaporator Fan power: approx. 7.5 kW Air ring heating: 4 x 0.72 kW Defrosting interval: sequential Heating in the pan: hot gas Control and switchgear cabinet Control system: Siemens PLC S7 CPU: 1512SP-PN Touchscreen: 12" Operating panel: TP-1200 Comfort Panel Interface to the refrigeration system: 0 - 10 V Main drive: 1 x approx. 2.2 kW Overdrive: approx. 1.1 kW Switchgear cabinet: Stainless steel on stainless steel base Temperature display: at least 1x per day Operating hour counter: available Belt cleaning: freely programmable Alarm lamp: optical, green / yellow / red Construction Material: Stainless steel 1.4301 Conveyor belt: Stainless steel, 762 mm Side guide for conveyor belt: approx. 25 mm Number of outlets: 2 units Product guides: 2 units EQUIPMENT Stainless steel construction Insulated housing with 140 mm insulation thickness Stainless steel belt with side edges on both sides Belt path from bottom to top Internal arrangement of the single-tower spiral Infeed at the bottom Outfeed at the top Hygienic design Food-grade plastics Easy-to-maintain accessibility SEW main drive with Danfoss frequency inverter SEW overdrive with Danfoss frequency inverter Motors in energy efficiency class IE3 Siemens PLC S7 with CPU 1512SP-PN TP-1200 Comfort Panel Touchscreen display Variable belt speed Operating hour counter Fault reporting system with traffic light and signal horn Emergency stop switch and safety sensors Height and belt control on each level Stainless steel cabinet on stainless steel base Freezer LED lighting controlled via the touch panel Welded stainless steel base pan with slope and drain outlets Under-freezer protection heating with reserve circuit Base temperature sensor with reserve sensor 4 separate evaporator units with one fan each Evaporator tubes made of stainless steel Evaporator housings made of stainless steel Evaporator pans made of stainless steel Hot gas defrosting in stainless steel block Ijdpfx Aezardtsdroth Sequential defrosting Inspection flap in the fan box Remote maintenance Ethernet

Condition: good (used), Year of construction: 1987, turning diameter over cross slide: 810 mm, spindle bore: 130 mm, turning diameter: 1,140 mm, turning length: 7,500 mm, quill stroke: 300 mm, total length: 7,500 mm, total width: 2,300 mm, total height: 1,650 mm, bed width: 600 mm, Please note: not original pictures its only 3000 length not 5000 mm   3 Guide way construction 2 Axis HeidenHain Digital readout Feed in 3 directions all tool post slide Central lubrication Itedsv S Dp Ispfx Adreh   Work load flying in chuck 2500 kg Work load NOT supported 8500 Kg Work load supported 10000 kg   Optional 4 chuck approx. 1200 mm Optional 4 chuck approx. 1500 mm Optional package with 3 steady rest fixed model from  .... to ....  Turning length: 5000 / 7500mm Turning diameter bed Ø: 1140mm Turning diameter slide: 810mm Turning diameter pit Ø: 1500mm Pit length: 2500mm Spindle bore: 130mm Bed width: 600mm Quill: 130Ø Quill stroke: 300mm Spindle mount: 6Mk Power: 25kW Speed: 9 - 900rpm Length: 7500mm Width: 2300mm Height: 1650mm Weight: 12000kg

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435793, used, normal signs of use, 100% functional, scope of delivery as per photos Itodpfxjryiqfo Adreh

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-L3-NN-FW IndraDrive Cs compact inverter MNR: R911335595 SN:7260409116208, used, in good condition, 100% functional, scope of delivery as per photos. Itjdpfjx Et Uxjx Adrjh

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW MNR: R911344555 Indra Drive CS control Serial number: 7260409876457, used, minor signs of wear, 100% functional, scope of delivery as per photos Iodpfstvcukjx Adreth

Condition: ready for operation (used), Rexroth HCS01.1E-W0028-A-03-B-ET-EC-NN-S4-NN-FW IndraDrive Cs compact frequency converter MNR: R911340084 SN:7260408670599, used, in good condition, 100% functional, scope of delivery as shown in photos. Ijdpfxox Et U Ee Adrsth

Condition: ready for operation (used), Rexroth HCS01.1E-W0005-A-03-B-ET-EC-PB-S4-NN-FW IndraDrive Cs MNR: R911344555 SN: 7260405435789, used, normal signs of use, 100% functional, scope of delivery as per photos Itsdpferyiqbjx Adrsh

Condition: new, Rexroth CSH02.1B-CC-EC-ET-L3-NN-NN-FW MNR: R911340358 SN7260409845853, unused, 100% fully functional, scope of delivery as shown in the photos. Iodox Dw Sispfx Adrsth

Condition: used, - Model: ET 94/SC - Serial number: SN006968 - Year of manufacture: 2014 - Number of decks: 4 - Number of doors: 1 - Internal dimensions (WxD): 920x1300 mm - Oven dimensions (WxDxH): 1440x2010x2720 mm - Oven height + extractor: 2300 + 420 mm - Total oven length with integrated loader: 3870 mm Itsdpfxswxmnxj Adreh - Loading bay with integrated loader (E): 1860 mm + 370 mm - Baking surface: 4.80 m² - Power: 20.04 kW - Voltage: 400 V - Weight: 2000 kg - Sold with integrated stainless steel loader - Refurbished equipment: the equipment is prepared upon order; lead times for collection and return are agreed at that time (please request price after refurbishment) The listing was translated automatically. Translation errors are possible.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 7,800 h, load capacity: 4,000 kg, lifting height: 5,500 mm, fuel type: electric, mast type: triplex, construction height: 2,650 mm, drive type: Elektro, Four-way side loader Mast type: Triplex Condition: Ready for use and fully functional Iedpszd H Umjfx Adrsth Technical condition: good Fork positioner, Heater, compliant with German Road Traffic Licensing Regulations (STVZO), full cabin, full free lift.

Condition: used, Charger Iodpfx Aeyvcmwedroth

Condition: new, mileage: 500 km, power: 70 kW (95.17 HP), fuel type: electric, overall weight: 4,250 kg, color: white, number of seats: 3, total length: 6,040 mm, total width: 2,200 mm, total height: 2,780 mm, loading space volume: 15 m³, loading space length: 3,400 mm, loading space width: 2,080 mm, loading space height: 1,570 mm, Year of construction: 2023, * CityRollup superstructure * All-aluminum body with Segemental roller doors * 2 compartments à 2,057 mm + 2 compartments à 1,320 mm * Dekra certified according to VDI 2700 ff and DIN EN 12642 XL * Range approx. 200 km * Lithium iron phosphate battery * Battery capacity 80 kWh 400 V * Leaf spring ORTEN Electric-Trucks E 35 with roller shutter body: Pricing taking into account the subsidies Technical data chassis: Manufacturer: ORTEN Vehicle class: N2 GVW: 4,250 kg (driving license class B) Unladen weight: 2,295 kg Wheelbase: 3,745 mm Tires: 185/75 R 16C Equipment: Seats 1+2 * Gear ratio rear axle i = 4.1 * Stabilizer rear axle * Front disc brakes * Rear drum brakes * Airbag driver * Fog lights * Heat-insulating glass * Luxury driver's seat * Central locking * Electrically adjustable exterior mirrors * Storage compartments left and right front doors * Multimedia 2DIN with USB connection * Hands-free system * ABS * Summer tires * Spare wheel, supplied loose * Wheel chock with bracket (vehicle class N2) * Cab color similar to signal white RAL 9003 * Chassis color graphite black * Wheel rims color silver * Warning triangle * First aid kit Itjdpfxsqz R Dms Adroh * Hazard warning lights * Operating instructions Technical data of the conversion: * Maximum speed: 85km/h * Range: approx. 200km * Battery: Lithium iron phosphate (LFP) Nickel and cobalt free * Battery capacity: 80kWh, 400V / DC * Charging plug: Type 2 Mode 3 / AC / IEC 62196 * Charging time: approx. 3.5 hours at 400 Volt / 22kW AC * Electric motor: Synchronous electric motor, water-cooled * Motor power: 70kW / Peak 92 kW * Torque: 410Nm / Peak 730Nm Technical equipment: Regenerative braking power * 22kW On Board Charger AC * DC/DC on-board power converter * Electric power steering assistance * BMS- CAN-BUS-controlled charging technology * Electric 5kW HV cab heater * Color display, shows all relevant battery, BMS, engine and control data * Diagnostic menu for engine control and BMS integrated in the information display * Diagnostic menu for battery cell monitoring integrated in the information display * Stainless steel construction elements * HV 400 Volt / DC battery heating system (only in charging mode) * Vehicle approval § 13 EG-FGV / ECE R100 ORTEN City Rollup body Assembly dimensions: Total length: approx. 3,600 mm Floor inclination: 0 mm Total height: approx. 2,360 mm Width of the bay: front 2057 / rear 1320 mm Total width: approx. 2,200 mm Height of the bay: 1575 mm Aluminum roller doors: Roll-up with spring support. Rubber band for pulling down the roller doors. In the closed position, the doors are secured centrally by a locking handle, which is mounted on both sides of the front wall and can be locked with a padlock. Pallet stop: Pallet stop approx. 20 mm on the outer edge of each bay, welded to prevent goods from sliding against the door Underride guard: Original chassis underride guard is used Rear wall: Fixed rear wall. Double-walled with aluminum planking with smooth surface. Paintwork: Body painted on the outside in RAL ? color. Lettering can be applied as specified at an extra charge Side steps: The side underride guard is formed by steps with an anti-slip surface for the driver. Steps along the bodywork on both sides of the vehicle, between the axles and behind the rear

Condition: used, mileage: 145,535 km, power: 81 kW (110.13 HP), first registration: 03/2014, fuel type: electric, overall weight: 4,250 kg, color: white, gearing type: automatic, number of seats: 3, loading space volume: 18 m³, loading space length: 4,200 mm, loading space width: 2,290 mm, loading space height: 1,900 mm, Year of construction: 2014, Equipment: ABS, central locking, ORTEN Electric-Trucks ET 35 M Pricing taking into account the subsidies for conversion from diesel to electric in 2018 (approx. 40,000 km) Technical data for the chassis: Manufacturer: Mercedes-Benz Vehicle type: Sprinter chassis GVW: approx. 4,250 kg Empty weight: approx. 3,350 kg Payload: approx. 900 kg Paintwork: white Technical data for the conversion: Top speed: 80 km/h Battery: lithium iron phosphate (LFP) Engine power: 81 kW Torque: 1,150 Nm Electric motor: Synchronous electric motor Information display: Display of all relevant battery, BMS*, engine and control data DC/DC converter Battery boxes, covers and brackets in V2A design Electronic operating instructions in short form (in 3 Languages) *BMS (Battery Management System) with integrated balancing function and CAN bus connection * Payload: approx. 900 kg * Range: approx. 200 km when driving at a constant speed of max. 60 km/h on a 1% gradient, range depends on load, driving style and route conditions * Charging time: approx. 4 hours * On-board energy: 87 kWh Leasing example ORTEN Electric-Truck ET 35 M: 49,900.00 net purchase price 36 month term calculated residual value: 10,000.00 ¤ 1,232.00 ¤ monthly rate plus VAT Rental offer ORTEN Electric-Truck ET 35 M: Delivery date: immediately The rental includes registration, tire wear, inspection and TÜV approval, service work and wear repairs. Not included: Damage or damage caused by incorrect operation Non-cancellable term Demonstration price: 1st week free and from 2nd week 400.00 ¤ plus VAT, maximum 4 weeks Rental period at least 3 months - monthly rental rate 1,390.00 ¤ plus VAT From 12 months: price per month 1,290.00 ¤ plus VAT From 24 months: price per month 1,140.00 ¤ plus VAT plus monthly insurance costs: 275.00 ¤ plus VAT Fully comprehensive insurance with excess 2,500.00 ¤ plus VAT Partial comprehensive insurance with excess 500.00 ¤ plus VAT From Ingolstadt location. Itedpfxorvdgle Adrsh Pricing plus statutory VAT. Offer subject to change, credit check required, errors excepted.

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Isdpfxjx Tgr Ts Adreth Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1997, turning diameter over bed slide: 1,240 mm, turning diameter over top slide: 980 mm, turning length: 3,000 mm, DBC Turning Length: 3000mm Swing over bed Ø: 1240mm Swing over cross slide Ø:980mm Swing in the gap Ø: 1980mm Gap length: 1500mm Spindle bore: 130mm Spindle power: 30kW Bed width: 500mm Stroke pinole: 300mm Spindle taper: 5Mk Speeds / ranges: 800Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Ijdpfex Di Rqex Adreth Workpiece load: 4000 Length: 7000mm Width: 2200mm Height: 2300mm Weight: 12400kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø Iedpfxjxtbf Es Adrjth 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, functionality: fully functional, power: 13.8 kW (18.76 HP), fuel type: diesel, color: yellow, overall weight: 1,588 kg, operation weight: 1,715 kg, Year of construction: 2026, Equipment: UVV, additional headlights, adjustable chassis, cabin, hydraulics, rubber tracks, Wacker Neuson ET 16 Mini Excavator – Edition A NEW Wacker Neuson Mini Excavator ET 16 – Edition A NEW | Operator’s Cab | Digging Depth 2,413 mm (long dipper arm) | Telescopic Undercarriage 990 mm | Flat-faced Couplers | Work Lights Front & Rear | Incl. Bucket Package & MS-01 Mechanical Quick Coupler Technical Specifications: Manufacturer: Wacker Neuson Model: ET 16 – Edition A Condition: NEW Cab: Operator’s cab Digging depth: 2,413 mm (long dipper arm) Undercarriage: Telescopic undercarriage – width 990 mm Couplers: Flat-faced couplers Lighting: Work lights front & rear Quick coupler: Mechanical MS-01 Bucket package: 300 mm & 500 mm trench buckets, 1,040 mm swivel bucket Highlights & Features: - Edition A – high-quality full equipment for professional use - Long dipper arm – digging depth 2,413 mm - Telescopic undercarriage – ideal for narrow access and high stability - Operator’s cab – comfortable operation in all weather conditions - Flat-faced couplers – fast & clean coupling Itjdpfx Adezarbrerjh - Working lights front & rear – optimal visibility for every job site Fields of Application: ✓ Landscaping & gardening ✓ Cable & pipeline construction ✓ Fiber optic installation ✓ Construction & civil engineering companies ✓ Municipal use ✓ Agriculture & yard applications Location: Warehouse D-46514 Schermbeck (NRW) – Inspection & collection possible Delivery: Germany-wide & international on request Price ex warehouse Maassenstraße 91, D-46514 Schermbeck (district of Wesel) All information subject to change. Errors and prior sale excepted. Prices plus VAT / VAT excluded Further variants available! ➡️ New & used machines, attachments, and spare parts Buy Wacker Neuson Mini Excavator | ET 16 Edition A | Mini excavator with increased digging depth & telescopic undercarriage | Set incl. MS-01 & bucket package | Wacker Neuson quality Your reliable partner for construction machinery: Claudio Macagnino Baumaschinen & Commercial Vehicles Trading GmbH ➡️ Enquire now & secure immediately available new equipment! If required, we are happy to arrange a virtual inspection of the machine via video call.

Condition: used, maximum load weight: 19,680 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2009, Year of construction: 2009, Equipment: ABS, Manufacturer Eurotank Model 3 axle ET-26-4 ADR 25.500 L 4 rum Year 2009 Condition Good Serial Number YF908S16S95049774 Ref. nr. 7832 Reg. date: 30.06.2009 Disc brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 385 / 55R22,5 Cover% left 20%-40% -40% Toolbox: ? Total weight: 24000 Kg Net weight: 4320 Kg Load capacity 19680 Kg Iedpowlydysfx Adrsth Tank: 25500 L Compartments: 4 (10000 L + 5000 L + 5000 L + 5000 L)

Condition: new, functionality: fully functional, power: 134 kW (182.19 HP), gearing type: hydrostat, fuel type: diesel, fuel tank capacity: 24 l, color: yellow, overall weight: 2,333 kg, empty load weight: 2,333 kg, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, emission class: euro5, Year of construction: 2026, operating hours: 1 h, Equipment: additional headlights, cabin, rubber tracks, soot filter, standard shovel, === MAIN SPECIFICATIONS === Year: 2026 Operating hours: 1 h Operating weight: 2,333 kg Max. digging depth: 2,420 mm Digging reach: 4,150 mm Bucket capacity: On request / depending on bucket Engine manufacturer: Yanmar / 3TNV76 Engine power: 13.8 kW Drive: Diesel Type: Crawler excavator Quick coupler: Yes Hydraulic functions: Auxiliary hydraulics Air conditioning: No Cabin: Closed Heated cabin: Yes Travel speed: 4 km/h Stabilizers: No Tracks: Rubber tracks Emission class: Stage V CE certification: Yes === HIGHLIGHTS === Brand-new machine with only 1 operating hour CE certification and full documentation included Equipped with closed cabin, rubber tracks, dozer blade and digging bucket Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Brand-new and unused condition – only 1 delivery/test hour. No wear, no rental use and no working history. Fully checked and ready for immediate operation. Inspection possible on request. === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery available. Price on request (EXW / excl. VAT). The Wacker Neuson ET24 is a compact and powerful mini excavator designed for efficient work in confined spaces, landscaping, construction, rental fleets and general earthmoving applications. Isdpfxoy Tufue Adreth This 2026 machine is in brand-new condition with only 1 operating hour. It is equipped with a closed cabin, rubber tracks, dozer blade, digging bucket and CE certification. With its compact dimensions, strong hydraulic performance and excellent operator visibility, the ET24 offers a practical combination of stability, comfort and productivity. A new and immediately available compact excavator from Wacker Neuson, ready for transport and direct operation. === DELIVERY === Crane loading possible on request for smooth transport during shipment. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the logistics team of Collé Rental & Sales.