Used centering & end processing machines for sale (21)

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Gisdpfx Ajt Hwuvsqwjw Grinding spindle speeds 13,000 – 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: used, Pipe notching tool, pipe notching tool Godpfjb Dwrzex Aqweiw -Max. Tube diameter: 60 mm -Eccentric tension -Pipe bracket: swiveling -Dimensions: 480/160/H380 mm -Weight: 28 kg

Condition: new, Year of construction: 2019, Balancing Machine Haimer TD 2009 Condition: As new (unused) Machine weight: approx. 350 kg Terminal weight: 50 kg Spindle speed: 300 – 1100 rpm Measurement accuracy: < 0.5 gmm Smallest measurable unbalance: 0.5 gmm Pneumatics, required operating pressure: 0.5-0.6 MPa, 5-6 bar Air consumption: 30 l/h Operating voltage: 230 V Frequency: 50-60 Hz Gisdpfxjxz R Urs Aqwow Total connection current, protected on site: 1 x 16 A Residual current circuit breaker: Type B Power consumption: max. 1.0 kVA Current consumption: max. 7.5 A Noise emission: < 70 dB Protection class: IP 50 No guarantee is given for the accuracy, completeness, or timeliness of the information provided.

Condition: used, Year of construction: 1991, Technical details: workpiece diameter - max.: 8 - 50 mm workpiece length: 5 - 500 mm spindle speed:: 100 - 1000 U/min workpiece diameter - max.: Ø 50 / Vollmaterial mm workpiece diameter - min.: Ø 8 / Vollmaterial mm workpiece diameter - max.: Ø 70 / Rohr mm workpiece diameter - min.: Ø 8 / Rohr mm wall strength: 1 - 10 mm Gsdpfju Iww Usx Aqwjiw centre height: 300 mm spindle hollow: Ø 90 mm cut-off length with swivable stop min/max.: 5 - 500 mm total power requirement: ca. 25 kW weight of the machine ca.: Anfrage t dimension machine xH: 5.,8 x 1,5 x 1,7 m dimensions electric cabinet: 1300x450x1950 mm dimensions L x W x H: panel de control: 0,36 x 0,30 x 0,68 m dimensions L x W x H: alimentación de material: 5,5 x 0,95 x 1,15 m Facing and Centering Machine (Manufacturing process cut to length and deburring possible) Other features: - turning speed of the parting head infinitely 100 - 1000 U / min. - speed end machining 4 wheelsets with speed from 52 - 1320 rpm. - feed push-off head continous, 0 - 0.3 mm / rev, hydraulic - feed deburring device feed infinitely 0 - 175 mm / sec. - feed head 0 - 0.03 mm / rev, continous - material supply speed 170 mm / sec. Operation is via operator panel / control panel i.D. *

Condition: used, Year of construction: 2014, Technical details: workpiece diameter - max.: 120 mm workpiece length: 403 mm spindle speed:: 750 / 1333 U/min workpiece diameter - max.: 120 mm workpiece diameter - min.: 25 mm workpiece length - min.: 117 mm workpiece length - max.: 400 mm Giodpfxsvxrwme Aqwsw work stroke: 40 mm total stroke: Einheit fest: 140 mm total stroke: Einheit verstellbar: 320 mm compressed air: 6 bar total power requirement: 4 kW weight of the machine ca.: 0,980 t voltage: 3x400V / 50Hz V dimensions L x W x H: ca. 2,1 x 0,8 x 2,1 m This is a centering and drilling machine that was specially designed for one of our customer's production concepts. Functional principle: The shafts are inserted by hand in the central area and then clamped at the touch of a button, after which drilling heads move simultaneously on both sides of the shaft and drill centering holes. 2x drilling heads (right/left) with tool holder/clamping fixture Mapal clamping cartridge, center height = 220 mm (machine currently equipped with collet chuck and centering drill) Clamping range max./min.: Ø 120mm / Ø 25mm via pneumatic cylinder, manual material feed Equipment: Grid enclosure EMERGENCY OFF *

Condition: used, Schuster NF2 / MLTS 2000 – Automatic machine for finishing the ends of grooves Manufacturer: Schuster Präzision Type: NF2 / MLTS 2000 Year of manufacture: 1996 Electronics modernized: 2015 Technical data: Length approx. 8,000 mm (incl. coolant system and chip conveyor) Width approx. 2,400 mm Height approx. 2,500 mm Weight approx. 13,000 kg Connection voltage: 400 V / 50 Hz Connection power: approx. 57 kW Compressed air requirement: approx. 50 m³/h Gijdpfx Aozcgpveqwjw Machine description: The machine offered is a highly productive special machine for the automatic machining of groove profiles or grooved workpieces. The system combines several machining and testing steps in an automated production process. Equipment according to machine card: Centering unit End machining, insert end Circular groove milling unit 90° rotary unit Trapezoidal groove milling unit Deburring unit for grooves Saw unit End machining, shaft Deburring, insert end Testing/deburring unit Embossing unit Additional data: Coolant tank approx. 350 liters Hydraulic tank approx. 400 liters Special features: Electronics comprehensively modernized in 2015 Complete enclosure of the machining system Automated material flow Several machining stations within one machine Series production with high repeatability Integrated deburring and testing devices The machine comes from ongoing production and was designed for the machining of workpieces with circular and trapezoidal grooves. Due to its special design, it is particularly suitable for users with a corresponding manufacturing task or for adaptation to similar machining processes. The feed magazine for the raw parts has been dismantled and is not included. Inspection: An inspection under power is possible by appointment. Machine location: Bremen Loading: Dismantling/loading by the buyer. _____ Our general terms and conditions apply; furthermore, the seller is not liable for typographical or data transmission errors. The information and images were provided to us by the owner and released for publication. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial users and without warranty.

Condition: good (used), total width: 2,300 mm, total length: 7,800 mm, total height: 2,250 mm, overall weight: 15,000 kg, Manufacturer: AXA Type: HFB 600 Control: Siemens 840D Solutione Line Year of manufacture: 2015 Specifications Metric US Standard There are (currently) no specifications for this machine. Dimensions (Estimated) Length: 7800 mm Width: 2300 mm Height: 2250 mm Weight: 15000 kg Gisdpst Tdp Tjfx Aqwow Please note: The information on this page has been provided by us to the best of our knowledge and belief, and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual obligation. We recommend that you verify all important details. Finishing of sealing surfaces: The finishing of the sealing surfaces of the approximately 17m long tubes is performed by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors, or measuring probes. The workpiece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the floating chuck once it is at a right angle and centered to the facing slide head. The interchangeable measuring sensors calculate how to process the surface.

Condition: used, Year of construction: 1961, max. workpiece diameter 100 mm min. workpiece diameter 10 mm workpiece length 1000 mm total power requirement 16 kW weight of the machine ca. 3 t dimensions of the machine ca. 0 m The guides have been outdated 10 years ago Gisdewwl I Ijpfx Aqwew

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Gjdpfx Ajy Hvp Usqwsiw

Condition: reconditioned (used), Year of construction: 1985, In 2020, the machine underwent a comprehensive overhaul for €7,000. Documentation is available. Work processes: - Chamfering 60° - Longitudinal turning up to a maximum of 40 mm - Center drilling Fully automatic work sequence: - Clamping, tool holder closed - Rapid traverse forward - Working feed - Dwell time for cutting - Rapid traverse back - Releasing, tool holder open Technical data: Max. workpiece diameter (round) 80 mm Max. workpiece diameter (6-sided) 70 mm Min. workpiece diameter (round and 6-sided) 10 mm Min. workpiece length 450 mm Speed range, infinitely variable Stage I / Stage II = 51-306 / 102-612 Electrical equipment 220/380 V, 50 Hz Motor power, main motor kW 1.3 / 1.8 Gsdjiamn Sspfx Aqweiw Motor power, coolant motor kW 0.07 Required air pressure 6-8 bar Weight approx. 520 kg Dimensions: L 1520 mm x W 610 mm x H 1350 mm Roller conveyor

Condition: new, Semi-automatic chamfering machine Developed and manufactured in England - Automatic chuck with material sensor - Automatic spindle start when the cutting head moves - Bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Can be easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990,- Gsdpjgkah Tjfx Aqwjiw

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 26-105 mm A second cutting head is required for smaller diameters - Adjustable bar support - Max. chamfering/turning length 45 mm - Turning and chamfering tool - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily moved with a pallet truck - Weight approx. 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified OPTION: Gedegi Rnwopfx Aqwsiw - Adjustable stop + universal chamfering tool €1,990

Condition: new, semi-automatic chamfering machine Developed and manufactured in England - automatic chuck with material sensor - automatic spindle start when the cutting head moves - max. speed 1,500 rpm - max. bar diameter 80 mm - adjustable bar support - max. chamfering/turning length 37 mm - precision three-jaw chuck - large chip collection container for easy cleaning - easily movable with a pallet truck - weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE certified Gsdpfxocacn Es Aqwsiw OPTION: - oil cooling (mist) € 3,380 - adjustable stop + universal chamfering tool € 1,990

Condition: new, Manual chamfering machine Developed and manufactured in England - Variable spindle speed adjustment - Max. bar diameter 80 mm - Adjustable bar support - Max. chamfering/turning length 37 mm - Precision three-jaw chuck - Large chip collection container for easy cleaning - Easily movable with a pallet truck - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1-year warranty Gjdjbwfh Uspfx Aqwsiw CE certified OPTION: - Adjustable stop + universal chamfering tool €1,990

Condition: new, Year of construction: 2025, functionality: fully functional, Simply Center Punch – The Center Marking Aid! A revolution in precision: We present the “Simply Center Punch” The world's only center marking device – an exclusive innovation from Northern Germany. The Problem No more inaccurate center marking of round parts - Are you familiar with the challenges of precisely center punching shafts or rods ranging from 15 mm up to 400 mm? - Inaccurate positioning. Gijdexb Ucaspfx Aqwsw - Poor lighting conditions - No glasses for older users - Time-consuming manual alignment - Inefficient and error-prone processes - The market does not offer a universal and reliable solution for varying diameters. Our Solution: Simply Center Punch – A World First! Simply Center Punch: Precision made simple. - Globally unique: A center punch device / center marking aid developed and utility model protected by us, setting new industry standards. - 100% in-house development: From the first concept to the finished product – all from a single source. - Manufactured in-house: We guarantee quality "Made in Germany." - Versatile use: For diameters from 15 mm to 400 mm. - Center marking at the push of a button: Simply position, turn the handle, and mark the center. Your Advantages at a Glance Your benefits. - Maximum precision: Centers drill holes and markings with accuracy up to 0.3 mm. - Saves time and money: Speeds up your workflow and reduces rework. - Effortless handling: Intuitive operation requiring no prior experience. – Weight just 780 g. - Universally applicable: One tool for nearly all diameters in mechanical engineering, metalworking, etc. - Robust and durable: Made from high-quality materials for professional, continuous use.

Year of construction: 1972, condition: used, This machine is 3x available. Gjdpeg Umitjfx Aqwoiw Data: Manufacturer: Landis Type: FRM 50 E-8 Year of manufacture: 1972 

quill travel: approx. 100mm

 Distance between spindles in retracted position: approx. 550mm Workpiece diameter max.: 75mm travel: per unit 200mm 3 drive powers:
 8,5kW/ 750 1/min 12kW/ 1450 1/min 18kW/ 2960 1/min Remark: the machine is equipped for ø20 and 65mm long Accessories: with magazine

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m Gisdpjri Sicefx Aqwjw

Condition: ready for operation (used), Centering machine KUHN KAZ 80-2 -Max. workpiece diameter / round: 80 mm -Max. workpiece diameter / square: 60 mm -Centering length / unlimited -Clamping unit with self-centering vise -Spindle drive: 1.8 kW -Drill chuck -Chip tray -Power cable -Forklift pockets for transport Giodoyur Uzjpfx Aqwsw Dimensions (LxWxH): 1.7x0.7x1.4 meters / Weight: 600 kg Subject to errors and omissions.

Condition: excellent (used), Year of construction: 1976, Offered here are centring and facing tools for an Uma countersinking and centring machine of the type SZM 80/800. there are approx. 11 complete sets for 2 side machining available. Please see the pictures for more information. Attention, only the tools are offered, the machine is sold ! Purchase complete or in sets on request. Giodpfjhfww Iox Aqwew The tool holder is specially designed for UMA SZM machines.

Condition: new, Year of construction: 2026, spindle speed (min.): 1 rpm, spindle speed (max.): 2,600 rpm, bar diameter (max.): 750 mm, overall weight: 18 kg, power: 1.3 kW (1.77 HP), Equipment: rotational speed infinitely variable, Portable Centere Drill Machine, weight 18 kgs for perfect center according DIN 333 Gjdpfsbc Sa Djx Aqweiw Motor 220V, 1300W, Speed 0-2600 rpm stepless Standard clamping range Ø 30 - 250 mm Optional jaws for Ø 250-500 mm / Ø 500-750 mm

Condition: new, Year of construction: 2024, functionality: fully functional, Clamping range 25 mm ID to 120 mm OD Electric drive: 1050 W, 230 V, 50 Hz Speed of the tool carrier unloaded 150 rpm, nominal 70 rpm Clamping with wrench Tool feed by hand Weight approx. 6.5 kg Incl. operating instructions In wooden box Gedpsvr Ec Ajfx Aqwoiw Incl. 1 planing knife 90 ° and 2 chamfering knives 30 °