Used 3D metal printer for sale (12)

Condition: excellent (used), Functionality: fully functional, We offer a highly productive 3D printer for industrial series production. The system was finally used with AISi10MG aluminum powder. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation prior to disassembly. All axes are properly secured. The machine can be transported on a standard truck. TruPrint 5000 G4 Bobjvu Syys E T Sgxowl Serial number S0731C0008 Year of manufacture 08/2018 Laser runtime Laser 1 beam on: 5165 hours Laser 2 beam on: 5096 hours Laser 3 beam on: 5023 hours Trumpf TruPrint 5000 with the Powder Bed Monitoring and Melt Poll Monitoring options, including a filter system. Accessories: 2x build cylinders 3x Dosing cylinder 1 used overflow tank 1 new overflow tank Manuals 4 new heat exchangers 2 new Easy Filters 3 new NTRON SIL02 Oxygen Analyzers + Sensors 1 new oxygen sensor and much more, such as seals, etc. The Armanni CAR.Elev. pallet truck for changing the tanks is also in stock and can be offered as an option. Get high-quality 3D components faster The highly productive, semi-automated TruPrint 5000 3D printing system prepares you for industrial series production. With features such as an optional 500°C preheater and full-field multi-laser configuration with three 500-watt TRUMPF fiber lasers, you are ideally equipped for the most demanding industrial applications. The machine produces high-quality components from a variety of metallic materials quickly and reliably, meeting the high quality standards in tool and mold making, including 3D printing on preform blanks, in the aerospace and medical technology industries. Optionally, the entire process chain can take place in a protective gas atmosphere: screening, printing, cooling, and depowdering. Combined with external parts and powder management and monitoring solutions from TRUMPF, it is ideal for industrial additive series production. Thanks to the Preform option, the TruPrint 5000 supports hybrid component production. The component structures to be additively manufactured are applied to a blank. This innovative option is particularly well-suited for easy handling in tool and mold making. TruPrint 5000 Build volume (cylinder) mm x mm Ø 300 x H 400 Ø 290 x H 390 (Reduction if preheating >200 °C) Processable materials[1] Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, or titanium alloys Build-up rate[2] cm³/h 5 - 180 Layer thickness[3] μm 30 - 150 Max. laser power at the workpiece (TRUMPF fiber laser) W 3 x 500 Beam diameter[3] μm 100 - 500 Min. measurable oxygen content ppm Up to

Condition: used, Year of construction: 2019, operating hours: 27,500 h, Functionality: fully functional, machine/vehicle number: S0711C0001, laser power: 1,000 W, laser hours: 2,300 h, laser wavelength: 515 nm, working range: 100 mm, Technical specifications for the base machine: TRUMPF TruPrint1000: SN: S0711C001, year of manufacture 2019, installed December 2019, Bob E T Sgjvptawexewl Build space: Build cylinder diameter 100 mm, effective build area 97 mm, construction height 100 mm Software version: H.M.I. Version 02.22.04 Operating hours: approx. 27,500 h* (including 2,290 h of production time) *As of September 2023 Technical specifications for the laser device: TruDisk 1020: SN: L5210M0058, Power: Single laser, output power of 1000 W at the workpiece, green wavelength: 515 nm Operating hours: approx. 11,500 h* Further information: The system was inspected and deinstalled by TRUMPF Service in September 2023. Up until this point, the machine successfully produced components of very high quality in our production (material used: copper alloy). Along with the system, you will receive the operating manual and the service report from the last maintenance in digital format. The last maintenance contract with the manufacturer was valid until May 2023. If you are interested or have any questions, please contact us by phone or email. In addition, a metal powder screening system from Piab Additive GmbH (formerly IB Verfahrenstechnik) is available for purchase for €10,000.00.

Condition: used, Used 3D Printer EOSINT M 270 low operating hours (4910) Bwob E T Sgewd Ulvsxol

Condition: ready for operation (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 28.16.0138, SLM metal 3D printer Name SLM280HL 400 W including up gas flow Year of manufacture 2016 Serial number 28.16.0138 Cooling unit DI l/W 4.6kW 50/60Hz Screening machine PSM100 V3 Bob Eev E Dggs T Sgxswl Absorption dryer DC 1.5E Hose clamp Hose 28/19

Condition: used, Year of construction: 2018, Functionality: fully functional, total length: 2,400 mm, total height: 2,945 mm, total width: 1,300 mm, type of input current: AC, overall weight: 2,900 kg, input voltage: 400 V, laser power: 3,000 W, One of the best model of the 3D metal printer model on the market. High tech, very accurate and fast, can print titanium. Made for aerospace manufacturing, but capable for other industries as well. Machine type: 3D printer Manufacturer: GE Additive Model: Arcam EBM Q20plus Year of construction: 2018 Condition: used Functionality: Fully functional Price 189000.- eur, loaded on truck. Best price you ever can buy such level printer. Packed into manufacturer boxes, ready to ship. Data from manufacturer: Max. build size 350 x 380 mm (Ø x H) Max. beam power 3kW Cathode type Single crystalline Min. beam diameter 140 μm Max. EB translation speed 8,000 m/s Active cooling Water-cooled heat sink Minimum chamber pressure 5 x 10-4 mbar Typical build atmosphere 4 x 10-3 mbar (partial pressure of He) He consumption, build process 4 l/h He consumption, ventilation 100-150 l/build Power supply 3 x 400 V, 32 A, 7 kW Size approx. 2,400 x 1,300 x 2,945 mm (W x D x H) Bwjbovmpq Tj E T Sgxel Weight 2,900 kg CAD interface Standard: STL Materials: Arcam EBM Ti6Al4V Grade 5, P-Mtrl Arcam EBM Ti6Al4V Grade 23, P-Mtrl

Condition: used, SLM Solutions Type: SLM 500 Build space (L x W x H): 500 x 280 x 365 mm (minus substrate plate height) 3D optics configuration: Quad (4x 700 W) Build rate: up to 345 cm³/h Variable layer thickness: 20 µm - 90 µm, Min. structure size 150 µm Focus diameter 80 µm - 115 µm Max. scan speed: 10 m/s Average protective gas consumption in the build process: 16 l/min (argon) Average protective gas consumption in the flooding process: 250 l/min (argon) Powder supply with 90 kg Electrical connection / power consumption: 400 volts 3NPE, 63 A, 50/60 Hz, 8-5.5 kW Compressed air requirement / consumption: ISO 8573-1:2010 [1:4:1] 7 bar Bwob E T Sjv Iff Nogxsl Machine dimensions (L x W x H): 6080 mm x 2530 mm x 2620 mm Machine weight (without / including powder): kg, kg with powder Was operated with aluminum AlSi10Mg! Laser hours: 1689 h Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Functionality: fully functional, We offer a highly productive 3D printer for industrial series production. Trumpf TruPrint 3000 G02 with the options Zirox Sensor, Single Laser, and Powder Bed Monitoring. Trumpf TruPrint 3000 including filter system. Serial number: S0721Q0022 Laser performance: Laser beam on 17,508 hours. The system was finally used with aluminum AlSi10MG. The 3D printer has already been disassembled by the manufacturer. Disassembly and functional reports are available, proving that the machine was in operation before disassembly. All axes are properly secured. The machine can be transported on a standard truck. Accessories: 4 dosing containers 1 construction cylinder 1 overflow container Various spare parts such as protective glass, etc. Manuals The Armanni CAR.Elev pallet truck. A container changer is also in stock and can be offered as an option. Fast to high-quality 3D components D1. Machine concept The TruPrint 3000 is a universal medium-format machine with external parts and powder management for the industrial production of complex metal components using 3D printing. Its large build volume offers high flexibility in terms of the size, quantity, and geometry of the respective application. Technical specifications TruPrint 3000 Build volume (cylinder) mm x mm Ø 300 x H 400 Processable materials5 - Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chromium, copper, titanium, or precious metal alloys. Build rate 6 cm3/h 5 - 60 Layer thickness 7 μm 20 - 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 - 500 O2 concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring - Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas - Nitrogen, argon Power supply V / A / Hz 400 - 32 - 50/60 Beb Eovu Tice T Sgxswl Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The information in our offer and order confirmation is authoritative. Technical data TruPrint 3000 Table 3

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: 1QJ071, Processable materials: Metals in powder form. These include, for example, stainless steels and tool steels, aluminum alloys, nickel-based alloys and titanium alloys. You can find more information about materials and surface quality on our homepage. Weight (net): 1,870 kg Laser type: Ytterbium fiber Laser power: 1 × 500 W Dimensions: 2,165 mm x 1,236 mm x 2,130 mm (L x W x H) Build space (1) 250 mm × 250 mm × 350 mm (L x W x H) Powder layer thickness: 20 μm to 120 μm Typical process speed (3): 2 m/s (max. 10 m/s) Build rate (2): Up to 254 cm³/h Beam focus diameter: 80 μm with dynamic focus Dynamic focus diameter: Up to 500 μm Beam wavelength: 1,070 nm to 1,080 nm Laser modulation frequency (max.): 20 kHz Build chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content) Filling/emptying system consumption: < 1,200 l Maximum argon consumption (during filling): 400 l/min Ongoing argon consumption (after initial filling): < 0.8 l/min Working pressure in chamber: 10 mbar to 20 mbar Argon gas supply connection: 3/8 in BSP male connector Argon quality: 20 ppm permissible impurity or better (99.998% purity) Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase Data connections (5): Standard RJ45 network connection. Renishaw recommends using Cat 6 power cables. Ideal operating temperature (7): 18°C to 22°C (min./max.: 15°C to 28°C) Ideal relative humidity (7): < 60% (max. < 80%) Clearance under machine (excluding base): 146mm Optical module protection class: IP5X Noise level: ≤ 70dB Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software (1) Build volume refers to the maximum build volume from wall to wall, however the usable area is usually smaller. The Bob E Tjv Ewpnj Sgxewl substrate plate is not included in the dimensions. (2) Maximum build rate does not include coating time and is dependent on parameters, part geometry and material. (3) Typical process speed depends on parameters, part geometry and material. (4) The calculated maximum load of the machine is 50 A, the nominal operating current is 32 A. (5) The user has the option to configure the network with their own control software. For more information see the RenAM 500 Series Additive Manufacturing System User Manual, Renishaw Part No. H-5800-3693. (6) Due to different electrical requirements in each country, the part numbers for the accessories may vary. Contact your country's customer service department if you have any questions about this. (7) Temperature and humidity must not be at the maximum specified at the same time and must remain below the value at which the dew point reaches 16 °C (61 °F) to avoid the formation of condensation on the laser components. See Site Preparation and Installation Guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.

Year of construction: 2021, operating hours: 11 h, Condition: like new (used), Functionality: fully functional, pipe diameter: 100 mm, The ATO Lab Plus is a state-of-the-art ultrasonic metal powder atomizer, perfect for producing high-quality spherical powders for Additive Manufacturing and powder metallurgy. Its compact design, innovative technology, and customizable modules ensure efficient and cost-effective powder production. The machine has not been used and is in new condition! The machine comes with all consumables and spare parts, instructions, and a chiller for cooling. Bjb Eov H Abxj T Sgxewl

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, total length: 2,400 mm, total height: 2,200 mm, total width: 2,400 mm, overall weight: 5,000 kg, 3D Printer 3D Systems proX DMP300 ADDITIONAL INFORMATION : The ProX DMP 300, a metal 3D printer from 3D Systems, can produce parts in aluminium, stainless steel, cobalt-chromium and many other materials. Weighing in at 5000kg, it is designed for sectors such as industry and dentistry. Compatible with Windows 7, it supports files in STL format. Its print volume is 250 x 250 x 330 mm, with a precision of 50 microns, enabling the manufacture of high-quality industrial parts. TECHNICAL SPECIFICATIONS: -Print size: 250 × 250 × 330 mm -Print volume: 20,625 L -Max. resolution (XY): 0.02 mm -Max. resolution (Z): 0.005 mm -Process: Powder Bed Fusion (PBF) -Technology : Laser beam > Laser beam powder bed fusion Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. The 3D Systems ProX DMP 300 is an industrial 3D printer designed for high-precision additive manufacturing of complex metal parts. Using direct metal laser sintering (DMP) technology, this machine is capable of producing metal parts of exceptional quality, suitable for the aerospace, medical and automotive sectors. It is ideal for applications requiring complex geometries. Bwjb E T Sjvr Thyegxel The ProX DMP 300 is particularly well suited to rapid prototyping, allowing great flexibility in the choice of materials such as aluminium, stainless steel, titanium, nickel alloys and many others. Thanks to its optimised construction chamber, it ensures minimum powder consumption and reduces production costs.

Condition: like new (used), Year of construction: 2022, operating hours: 70 h, Functionality: fully functional, machine/vehicle number: AL-001-0007, laser power: 200 W, travel distance X-axis: 100 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 100 mm, HIGHLIGHTS - Very fine laser spot for the finest geometries Bwsb E T Sgsu S H E Hexjl - Powerful laser - High powder yield - Reliable printing process thanks to intelligent AL3D-OS software - Small footprint 600 × 617 mm - Closed gas circuit for reduced gas consumption - Low energy consumption - Unpacking station: Clean separation of the sintered component from unused residual powder + collection of the residual powder for possible reuse TECHNICAL DETAILS Installation space size: d = 100 mm, h = 100 mm Resolution: 50 µm Laser & optics Laser type/wavelength: fiber laser 200 W CW, 1070 nm Focus diameter: 50 µm Scanning speed: max. 5 m/s Process parameters: Open access to all machine and process parameters software Operation: 15.6" touchscreen, keyboard and mouse possible Connectivity: Ethernet; 2 × USB Software: AL3D-OS, offline version for project creation Remote access: TeamViewer External software: Autodesk Netfabb, Materialise Magics, CIM Systems Pyramis Software interface: Open interface for external postprocessors File format: CAD import STL Print preparation: Simple support generation; slicer integrated in software Materials Material: Metal powder, grain size fraction 10-45 µm Alloys: Iron, nickel-based, cobalt-chromium, precious metals, reactive metals (others on request) Component density: > 99 % Layer thickness: 10 - 50 µm MACHINE DETAILS Machine dimensions Weight: approx. 180 kg W × D × H: 600 × 617 × 1,770 mm Unpacking station dimensions Weight: approx. 100 kg W × D × H: 600 × 617 × 1,770 mm Operating hours: 70 h Electrics & connection Electrical connection: 230 V, 50 Hz / 60 Hz, max. 16 A Permissible humidity: max. 70 % Permissible ambient temperature: 15 - 30 °C Shielding gas/argon connection: 4.5 - 6 bar inlet pressure, Ø 6 mm hose connection Gas consumption in operation: < 5 l/min Gas consumption purge function: 20 l/min Unpacking station Vacuum cleaner connection: NW32 connection EQUIPMENT - 3D printer - Unpacking station - 9 print cartridges.

Year of construction: 2019, operating hours: 2,400 h, Condition: used, Functionality: fully functional, machine/vehicle number: 1QHY72, Processable materials: Metals in powder form. These include, for example, stainless steels and tool steels, aluminum alloys, nickel-based alloys and titanium alloys. You can find more information about materials and surface quality on our homepage. Weight (net): 2,040 kg Laser type: Ytterbium fiber Laser power: 4 × 500 W Dimensions: 2,165 mm x 1,236 mm x 2,130 mm (L x W x H) Build space (1) 250 mm × 250 mm × 350 mm (L x W x H) Powder layer thickness: 20 μm to 120 μm Typical process speed (3): 2 m/s (max. 10 m/s) Build rate (2): Up to 254 cm³/h Beam focus diameter: 80 μm with dynamic focus Dynamic focus diameter: Up to 500 μm Beam wavelength: 1,070 nm to 1,080 nm Laser modulation frequency (max.): 20 kHz Build chamber atmosphere preparation time: 15 minutes (to < 1,000 ppm oxygen content) Filling/emptying system consumption: < 1,200 l Maximum argon consumption (during filling): 400 l/min Ongoing argon consumption (after initial filling): < 0.8 l/min Working pressure in chamber: 10 mbar to 20 mbar Argon gas supply connection: 3/8 in BSP male connector Argon quality: 20 ppm permissible impurity or better (99.998% purity) Power supply (4): 380 V to 480 V AC, 63 A, 50 Hz to 60 Hz, 3-phase Data connections (5): Standard RJ45 network connection. Renishaw recommends using Cat 6 power cables. Ideal operating temperature (7): 18°C to 22°C (min./max.: 15°C to 28°C) Ideal relative humidity (7): < 60% (max. < 80%) Clearance under machine (excluding base): 146mm Optical module protection class: IP5X Noise level: ≤ 70dB Compatible software: QuantAM, InfiniAM Camera, InfiniAM Spectral, Renishaw Central and selected third-party software (1) Build volume refers to the maximum build volume from wall to wall, however the usable area is usually smaller. The substrate plate is not included in the dimensions. (2) Maximum build rate does not include coating time and is dependent on parameters, part geometry and material. (3) Typical process speed depends on parameters, part geometry and material. (4) The calculated maximum load of the machine is 50 A, the nominal operating current is 32 A. (5) The user has the option to configure the network with their own control software. For more information see the RenAM 500 Series Additive Manufacturing System User Manual, Renishaw Part No. H-5800-3693. (6) Due to different electrical requirements in each country, the part numbers for the accessories may vary. Contact your country's customer service department if you have any questions about this. (7) Temperature and humidity must not be at the maximum specified at the same time and must remain below the value Bweb E T Sgjv Ewaasxsl at which the dew point reaches 16 °C (61 °F) to avoid the formation of condensation on the laser components. See Site Preparation and Installation Guide for the RenAM 500 Series Additive Manufacturing System, Renishaw Part No. H-5800-3692.