Used Forging attachments for sale (40)

Condition: good (used), Year of construction: 2017, machine/vehicle number: F1703006, Complete 2017 Hosung HFPX 1600 Ton Forging Line; 255mm Stroke, 75 Strokes Per Minute, 1330mm Die Height, 10mm Slide Adjustment, 1870mm x 1320mm Slide Area, 2150mm x 1320mm Bolster, 150KW x 10P. Refer to attachments for further equipment specs & drawings. Lot subject to seller confirmation Line to includes: - Ficep Hot Shear, Bar Loader, and Controller - InductoHeat 5 Stage Induction Coil Heaters and Frame - Hydraulic Pump and Fluid Tank Assembly - Transfer Station and Tooling - Conveyer Systems/Cooling Conveyer - Kuka QUANTEC - 2 Industrial Robot Cfsdsoikaw - Roll Table Forge - Calibrator and Transfer Station with Fencing - Hydraulic Pump and Fluid Sump/Surge Tank - Lubrication Tank Assembly, Pumps and Heater - Qty. 6 Spare Induction Coil Heaters & pallets of misc. spare parts Note this lot is subject to seller confirmation, lots will be awarded in bulk or individual pending highest bid amount.

Condition: good (used), Year of construction: 2014, Hämmermaschine ( Kaltschmiede) Dm2Myl Fabrikat: FELSS Baujahr: 1998

Condition: ready for operation (used), Year of construction: 2007, Hammering machine / automatic hammering machine from Fless, model HA 15-1 VUE. Rotary swaging machine / reducing machine for plunge hammering and feed hammering of drill bits. The basic machine dates back to 1984 and was converted and upgraded in 2007. You will find the AWF card with the pictures Dpdntv The machine can be viewed here under power. _____ Our general terms and conditions apply, and the seller is not liable for typing or data transmission errors. The appearance of the items on offer corresponds to their age and the pictures shown. The technology and wear of the items on offer are in keeping with their age. Used machines are sold exclusively to traders and without warranty.

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; Cfnul9Ios -total weight - 35t;

Year of construction: 2001, Condition: good (used), Used forging hammer HUTA ZBM 3.150C. Impact energy: 35KJ Ram weight: 1250kg Max. weight upper die: 400kg Strokes per minute: approx. 110 This hammer has a very strong U-anvil, which absorbs the blows of the hammer well and is less prone to cracking. Yvzvqc

Condition: good (used), fired anvil Dqktd2 Weight approx. 50 kg

Condition: used, Blow energy: 4000 kg/m Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Dqmdav Die height: 350 mm Ram weight: 1760 kg Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: good (used), machine/vehicle number: 23027, Offer 23027 Jifxasb Technical data: - Diameter top / bottom 350 / 750 mm - Wall thickness approx. 45 mm - Foot diameter 750 mm - height 1380 mm - Total weight approx. 600 kg

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW Brvbqi9Lzyo - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: used, Technical details: weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Bsheuvmy9S3 Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Bsszirth

Condition: used, Year of construction: 1987, serial number 33320007 frequency 50 Hz Blqkjq8Bw8E volt 380 V ampere 3,8 weight 300 kg taper MK 3

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Dqmdal Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: used, Notching machine Kevin. Very strong and powerful machine, can additionally be used as a press. Specification: Model: Kevin Power: 3.9 T Machine cut: 240 x 240 Beshfprkuv8 Other: Adjustable cutting angle Working hours: 2577 If you have more questions, we will be happy to answer them.

Condition: new, - Solid cast iron body - Steel substructure - Hand and foot operation - Adjustable oiler - incl. upper and lower tool (flat dies) Technical data: - Capacity: 25 kg Tgqqtfzwk - Stroke rate: 250 / min - Lifting height: 250 mm - Projection: 200 mm - Cylinder Ø: 125 mm - Working height: 850 mm - Motor power: 2.2 kW - Voltage: 400 V - Dimensions WxHxD: 570 x 1630 x 1310 mm - Weight: approx. 670 kg

Condition: used, Blacksmith vise, bottle vise, anvil vise, anvil, forge anvil, bench vise, locksmith vise, parallel vise Sssvso -Jaw width: 135 mm -Span width: 150 mm -Number: 10x vices available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg

Condition: good (used), Year of construction: 1978, Functionality: fully functional, Hot forging hammer 5 ton Kramatorsk type M2147 Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Czgjpstozx Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t + Trimming press Voronez type K9538 Capacity, ton: 630 Stroke 400 mm Table size (left to right) 1250 mm Table size (front to back) 1250 mm Ram adjustment 180 mm Strokes 20/15 min-1 Shut height 750 mm Upper ejector: power 20 t, stroke 125 mm Driving power 32 kW Driving power overall 58 kW Required space 3280 x 3470 mm Height of machine above floor 6190 mm Total weight 53 ton

Condition: used, Year of construction: 1960, length 880 mm Dpr9Az weight 60 kg height 320 mm

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Dqmdab Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: new, Zimas H20 - Air forging hammer - solid cast iron body - steel base - Hand and foot operation - Adjustable oiler - incl. upper and lower tool (flat dies) Technical specifications - Capacity: 20 kg - Stroke rate: 270 / min - Lifting height: 200 mm - Projection: 180 mm - Cylinder Ø: 115 mm - Working height: 850 mm - Motor power: 2.2 kW Brva9Qrhms0 - Voltage: 400 V - Dimensions WxHxD: 520 x 1550 x 1180 mm - Weight: approx. 520 kg

Condition: used, Turning device, forging device, welding turning device, welding device -for: production of spirals, springs ... -Holder: Ø 88 x 300 mm -Speed: 31 rpm -Drive: 1.5 kW -Voltage: 400 V -Dimensions: 1000/550/H1200 mm Yigom2Mqa -Weight: 120 kg

Condition: used, Year of construction: 1960, width 1000 mm Czgm88U8I8 weight 88 kg height 390 mm

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Operating height: 780 mm Cmdmw8Kzx3 Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Year of construction: 1960, Condition: used, Krups A100 Ckxrsfly .

Condition: used, Year of construction: 1970, pressure . t stroke . mm Dppwu2 total power requirement . kW weight of the machine ca. 3 t dimensions of the machine ca. . m