Used Surface finishing machines for sale (200)

Condition: good (used), Painting booth, drying booth, paint spraying system Manufacturer: LUTRO Interior dimensions: LxWxH = approx. 750x500x400 cm Bkoqf7Zsldb Screwed steel construction with sandwich panels Room volume: approx. 150 m³ 2 front extraction walls and supply air ceiling with 4 panels 4 explosion-proof lights on each side, 4 fluorescent tubes each Front can be fully opened with segment door Cabinet lid can be opened in the middle for entry with overhead crane 2 entrance doors on the side Complete with control cabinet Extraction motors, etc. Heating system for heating the supply air Airless sprayer ä140125

Year of construction: 2006, Condition: good (used), Output power max. 70 kW (for max. 5 min. at 50% duty cycle) Continuous power 57 kW Operating frequency 157-260 Hz Components and functional groups • Compact floor-standing device for indoor installation (protection class IP 54) • Power contactor • Three-phase rectifier • Inverter with MOSFET transistors • Control and regulation unit .indirect water cooling system • External or internal power control or regulation • Control panel with electronics slot and Plexiglas cover • Collective error message with individual operating fault displays (alarm card) 1.2 External resonant circuit type TSC new with a set of connection cables between converter and external circuit, water-cooled, length max. 3 m 1.3 Connection jaw system for center bearing and indexing plate operation with feather key for precision voltage consisting of connection jaw and connection piece with quick voltage and Key Machine control cabinet (without cooling) on the side, with integrated panel for operating and display instruments OP10 (front) CNC manual input control, Siemens 840 D with PCU50 including maintenance contract for 1 year, Safety Integrated, Teleservice Technical data: Workpiece clamping length between the centers: 1500 mm * • Max. hardenable workpiece outer diameter (power dependent): 400 mm +Max. Workpiece weight (only for main spindle operation): 400 kg • Vertical inductor travel path (CNC Z-axis): 1650 mm • Inductor travel speed (can be preset via CNC): 1 - 300 Inductor horizontal adjustment • • left/right manually: 5 mm • forward/backward manually: 00% mm • Main spindle rotation pole-changing (can be preset via CNC): 50/300 Vertical tailstock travel speed: 20 M/s Ovgnvfxsa mm/s min-1 (* Depending on the process, shorter workpiece clamping lengths may result!) VA version in the tub area Additional charge - end position monitoring tailstock quill Steady rest, pneumatically open/closed alternating with tailstock Clamping range 8-100

Year of construction: 1975, Condition: excellent (used), Dimeter of the drum: 525 mm Depth of the drum: 620 mm Volume: 170 Ltr. Capacity: max. 150 Kg. *with Time-controller 0-60 min* Nwjr2

Condition: ready for operation (used), Manufacturer : ITF srl Screw diameter : 700mm length : 7500mm Ccuizpslxi The machine offers the following functions -degreasing laundry -rinsing -hot air drying (gas heating)

Condition: new, Year of construction: 2024, Functionality: fully functional, laser power: 20 W, type of cooling: air, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge. Y0Zyyq0G With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks and without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Year of construction: 2013, Condition: ready for operation (used), A Wheelabrator overhead conveyor blast machine with a Y-shaped overhead conveyor system with 2 support hooks and two integrated loading and unloading stations is available. Max. workpiece diameter: 1200mm, max. workpiece height: 1600mm, max. workpiece weight: 800kg, turbines: 2, turbine power: 11kW, turbine diameter: 380mm, fan power: 30kW, filter cartridges: 4, filter area: 13m²/cartridge. Including two Demag hoists. The sprocket and rubber seal of the system must be replaced. Documentation available. On-site inspection is possible. Txia90N8A

Year of construction: 2005, Condition: good (used), Blasting system Sandblasting system Blasting cabin Manufacturer: Hodge Clemco Sgquvndpun Type: 2452 Year of manufacture: 2005 Complete system as shown in the pictures Incl. filter system Incl. compressor Internal dimensions approx.: LxWxH = 15 x 5.5 x 4.5 m Availability: immediately ä140125

Condition: good (used), Sandblaster WORKSMASTER SBC900 Internal dimensions: Width 950 x Depth 800 x Height 800 mm Sandblaster dimensions: Width 1400 x Depth 1300 x Height 1800 mm Equipped with: 1 vacuum cleaner Voltage: 220 V mono Cewvjvbat7 Weight: 200 kg

Condition: new, Year of construction: 2025, Machine type: EVP-A 550 Manufacturer: ERBA Power kW: 4,0 Total volume: 550 lt. Description: The vibratory grinding machine EVP-A 550 from ERBA has a flat working tank bottom with separation. It has an easily replaceable sieve unit as well as a fully automatic PLC process control (optional). Emptying or separation takes place via the integrated flap (manual/pneumatic). On request, a reinforced suspension and a reinforced motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter (optional). The EVP-A 550 can be linked to other machines by its lateral discharge. The indicated price is net plus the currently valid legal sales tax and plus freight costs. Dllihf The pictures may show the plant incl. accessories, which are optionally available and are subject to additional costs. The indicated price refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, telephone, message portal). In the first step we submit a non-binding offer, with which we also inform you about our general terms and conditions with imprint and the right of withdrawal before it comes to the purchase / conclusion of contract.

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: xxxxx, Washing machine Manufacturer: CIEFFE Type: WCR 8/X/"/VAP/US/G-R Year of construction: 2007 Heating: 120kW gas Evaporator vacuum boiler, ultrasonic, dryer, compact de-oiler, level controller Cleaner tank 4500 ltr. Flood tank 4500 Ltd. L8Hjnwti

Year of construction: 2024, Condition: new, Functionality: fully functional, The universal laser marking system LAS 28 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes a laptop incl. holder with Windows operating system. Optionally, the laser model LAS 28 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral cantilevers for marking long parts, can be realized. Made in Germany - Fiber laser 20W (Optional: 30W, 50W) - Wavelength 1064nm - marking field size 150x150mm (optional: 200x200) - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) Bmrczc0Vfy - optional: autofocus function for automatic determination of the focus distance - marking software EZCAD - Pilot laser (simple preview, clear text preview) - focus finder (easy focus adjustment) - max. part height approx. 270mm - electrically adjustable Z-axis (adjustment of working plane) - frame made of aluminum profile - connection 230V - air cooled - Laptop with operating system Windows - dimensions: 800x 600 x 1660mm (LxWxH) - Weight: approx. 80 Kg

Year of construction: 2018, Condition: good (used), Functionality: fully functional, Max. part size: LWH 3 x 1,5 x 2,15 m Max. part weight: 400 kg Room size: 12 x 40 m Gas burners 2 pcs., each 190 kW Electric connection: 103 kW Line set-up: Pos. 1. Manual conveyor system, 10 load-bars, 2 lifts, steel supports. Pos. 2. Chemical pre-treatment chamber, 3 stages, electrical heating. Pneumatic doors. Pos. 3. Drying oven, gas-heated. By heating power can also be used as curing oven. Pneumatic doors. Pos. 4. Painting booth with powder recirculation possibility, 12 500 m3h, 11 kW fan. Pneumatic doors. Pos. 5. Painting booth for mixed colours, 12 500 m3h, 11 kW fan. Manual doors. Pos. 6. Powder coating equipment, Nordson LT box and HD hopper units. Pos. 7. Curing oven, gas-heated. Pneumatic doors. Pos. 8. PLC control panel. Line is in good condition and well serviced. Pictures are as new at the moment, we will add pics with present condition soon. Future service and support available in all Europe. Layout can be changed according to needs. Doyjh7 It is possible to divide the line into two and sell separately - one with pretreatment, painting booth and oven, another with only painting booth and oven. Conveyor and lifts can be divided as needed, also added new tracks, buffers, load-bars etc. Line is dismantled and connections marked in professional way. Stored in a dry environment. We can offer only the equipment or also "turn-key" moving to your premises and/or provide installation supervisor.

Condition: good (used), Painting system, painting booth Manufacturer: Noppel Year of construction: unknown Dimensions see drawings Water-sprayed spray booth made of stainless steel Bobkcqgn32F with paint sludge discharge device incl. fresh air and heating fan for pressure regulation in the room ä140125

Year of construction: 1987, Condition: good (used), Sandblaster COMO type LC 05 Year of construction: 1987 Internal dimensions: Width 790 x Depth 590 x Max Height 650 mm Opening of the 2 sides possible Equipped with 1 integrated dust vacuum cleaner Voltage: 380 V Width: 900 mm Babln80Sq Depth: 1200 mm Total height: 1700 mm Weight: approx 200 kg

Condition: new, Year of construction: 2025, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 lt. Description: The vibratory grinding machine EVP 1500 from ERBA has a flat working tank bottom without separation. Emptying or separation is done by bottom emptying (manual/pneumatic). It has a fully automatic PLC process control (optional) and on request a reinforced suspension and motor can be installed for higher loads. The motor speed can be infinitely adjusted by means of a frequency converter (optional). The indicated price is net plus the currently valid legal sales tax and plus freight costs. The pictures may show the system incl. accessories, which are optionally available and are subject to additional costs. The indicated price refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. Btqweg2Vow The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, telephone, message portal). In the first step we submit a non-binding offer, with which we also inform you about our general terms and conditions with imprint and the right of withdrawal before the purchase/contract is concluded.

Year of construction: 2023, operating hours: 145 h, Condition: excellent (used), Functionality: fully functional, laser power: 300 W, laser wavelength: 1,064 nm, machine/vehicle number: KLB2306071814-2, German manufacturer! For cleaning concrete, stone, steel, other metals, stainless steel, wood, tiles, etc. Removes rust, paint, tarnishing, etc. Blast width and height adjustable (pattern and size) 10-190mm, air-cooled machine, with compressed air line to the handpiece for rinsing protective glass, handpiece only 0.7kg, fiber optic cable length to the handpiece 3.5m, machine weight, approx. 70kg, 2 swivel castors with brakes, 2 fixed castors, external dimensions: 540x420x780mm (LxWxH), power consumption: 900W (only with active jet), Sale only to B2B! VAT is deductible. Dqwl2F Collection only

Year of construction: 2024, Condition: new, Functionality: fully functional, machine/vehicle number: LAS 23 mit integrierter Absaugung, The mobile laser LAS 23 portable is characterized by its compact design. Small, handy and with custom-made attachments that can be individually exchanged in the quick-change system. With its mobile base, it can be moved to the workpieces to be marked. This makes it suitable for small, large and heavy workpieces. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and item numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Made in Germany - Fiber laser 20W (optional 30 W) - Laser class 1 - CE compliant, according to EU directives - Wavelength 1064nm - Marking field size 70x70mm (optional: larger) - Signal lamp for indication of operating status - marking software EZCAD - Connection 230V - Air cooled - Laptop with Windows operating system Fuedou38 - Dimensions: 350 x 605 x 1080mm (LxWxH) - Weight: approx. 40 Kg - weight of portable laser unit 2,8 Kg - fiber optic cable approx. 2,50 m - Extraction optional

Year of construction: 2025, Condition: new, Laser cleaning device for derusting, descaling and cleaning of materials and components. These are absolute professional devices. Ideal for vintage car restorations and in the automotive and metal and plastics industry. We are happy to help you find a solution and can test your project here in the factory. The handling of the machines is easy to learn. Ezdzapj

Condition: good (used), Functionality: fully functional, power: 2.2 kW (2.99 HP), Pipe bend grinding machine Glaser GRS 33 Wet grinding device Foot switch Workpieces from Ø 10mm to Ø 80mm Drive motor: 2.2 kW Weight: approx. 160 kg The pipe bend grinding machine GRS 33 is suitable for grinding round or elliptical workpieces such as pipes or round material made of stainless steel, iron, aluminum, brass, copper and wood. Dqxouj The pipe cross-section can be round or elliptical. The pipe bends can be ground dry or wet. The grinding machine is equipped with a coolant device for wet grinding. We have converted the machine so that it can now be operated at a continuously variable speed. (ideal for Scotch tapes. A few tapes are also included.

Year of construction: 2024, Condition: new, Working space 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight vacuum cabin in stable sheet steel construction Working gloves I7Hfr7Eb special rubber, wear resistant, cotton inside, firmly connected to the cabin against dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight closing, double-walled, sound-absorbing foam, lockable, with electrical shut-off safety device Blasting media recovery Via coordinated MHG recovery system Operation ON/OFF switch for suction and lighting, pressure regulator, manometer and foot switch Viewing panels

Year of construction: 1996, Condition: ready for operation (used), A complete WMV coating system for the surface treatment of bulk materials is available. Charging capacity: approx. 1000kg-2000kg, charging weight per partial batch: 170kg, tray dimensions X/Y/Z: 1200mm/800mm/140mm, control: Siemens S7. Components: Loading and unloading, loading system, charging system, desoldering system, crate washing system, rinsing system, drying system and washing system. One cooling system and one immersion bath are defective. The drying system was extended in 2008 for bulk solids. Documentation available. On-site inspection is possible. Rjwbzx7Ng

Year of construction: 2009, operating hours: 1,472 h, Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: N°M11490, WIRE BELT BLASTING SYSTEM Manufacturer: OMSG Type: CWB 500/4 T Year of manufacture: 2009 Passage width: 500mm Passage height: 250mm Spinning wheel: 4 pieces Filter system: Yes Dqwkvl Machine length: 6100mm Machine height: 4350mm Incl. operating instructions, documentation, etc. The system is assembled and ready for use. A viewing is possible by prior appointment. Price: on request EXW: dismantling and loading is carried out by the buyer

Condition: good (used), Year of construction: 2007, Noppel powder coating system Pretreatment and powder coating system with manual overhead conveyor, partially automated Material steel, bright sheet steel, aluminum, stainless steel Dimensions (workpiece/hanger) length 6,000 mm, width 1,700 mm, height 2,300 mm Cycle time for 24-36 hangers per 8 hours selected: 20min/hanger, adjustable via PLC Surface throughput max. 150m²/h Working days 220 days / year Working time 8 hours / shift Number of shifts 2-shift operation Weight 1,100 kg/ workpiece weight/ transport unit Part surface 38 m²/hanger trolley Throughput 3 hanger trolleys/hour Material throughput max. 3,500kg Transport system / conveyor system manual overhead conveyor – partially automated – with lifting and lowering station Transport speed approx. 6m/min (adjustable via frequency converter) – drag conveyor technology The function and operation of the system components are explained in the technical description below and the detailed individual description. Dqwndf The exact arrangement of the system components in relation to one another can be found in the enclosed project drawing. Pretreatment technology - consisting of: Cleaning booth Automatic cleaning device using a movable nozzle rod Water technology Stainless steel belt filter, manually operated Safety drip tray for the buffer tank Fresh and waste water technology - consisting of: City water conditioning system, designed as a softening system with reverse osmosis Deionized water buffer tank, capacity 3 m³, with pump station Adhesive water dryer Large-capacity powder coating booth Powder kiln Exhaust air piping Conveyor technology for 1,000 kg workpiece weight - consisting of: Hand overhead conveyor, partially automated 2 lifting and lowering stations for installation during loading/unloading Design - per lifting and lowering station 16 hanging trolleys for workpiece weight 1,000 kg Support structure Control technology: SIEMENS S7

Year of construction: 2002, Condition: used, Sulzer METCO Plasma Coating Plant for cylinder block and cylinder head, YOM 2002 D7Tmnls New price: ? 16-20 mio

Year of construction: 2010, Condition: good (used), Offer 24503 Technical data: - Vacuum cabin with viewing window - Working space size approx. W 1250 x H 900 x D 900 mm - Front door that can be folded upwards with operating openings - Blasting room accessible by hand for operating the blasting gun - 2 operating openings 300 mm - Viewing window 500 x 400 mm - Push-through opening left + right 240 x 240 mm Pxggyzk9A - Blasting material recovery - Filter system with cartridge filter, filter area approx. 8 m² - Air consumption from 600 to 900 l/min - Pressure reducer with water separator - Foot switch - Drive 400 V / 0.55 kW - Space requirement approx. W 1600 x H 2200 x D 1750 mm - Weight approx. 450 kg