Year of construction: 2014, condition: used, Max. Stanzkraft: 50 kN Stroke activation via foot switch Crodpowb Eucofx Abwja Good condition

Year of construction: 1998, condition: used, Longitudinal cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Cjdpfxowx I Hvo Abwsra Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Push-in length of the material pusher maximum 6,200 mm System is dismantled in our warehouse Further technical data on request

Year of construction: 2006, condition: used, Saw blade diameter (vertical): 550 mm Saw blade diameter (horizontal): 500 mm Max. profile height: 250 mm Max. feed rate: 830 mm Digital angle displays for material stop and tilting of both saw units Pneumatic material clamps Minimum quantity spray device Hydropneumatic saw blade feed via 2-hand operation Cjdpfx Asyybr Uobwora Weight: 1,000 kg

Condition: used, Year of construction: 2013, Total 8 pieces available, price per table Advantages: Cedeyx Hpcjpfx Abwjra - Due to the narrow design of the base frame, good accessibility of the components from all sides - Large adjustment range of the supporting surface by pulling out the diamond-shaped supports - Tools and small parts always at hand on the shelf at the assembly tables - Support hooks optionally covered with rubber, brushes, sliding strips or felt - When using the device carriers, no cable clutter: the machines are always ready at the deployment site Domestic equipments: - Working surface covered with profile rubber - In the edge area, diamond-shaped arranged supports for laying profiles in longitudinal direction - Height adjustable 900 – 1,100 mm

Year of construction: 2000, condition: used, Saw blade diameter: 350 mm Pneumatic material clamps Crsdpfsyx Hmuox Abwea Micro spray device The sawing table can rotate in both directions

Condition: good (used), Double Mitre Saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade Ø 330 mm - Cutting range at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping system Crsdsygm Akjpfx Abwja

Year of construction: 1996, condition: used, Hydropneumatic operation Credpfjyxpw Nsx Abwja Punching force: 50 kN Work hub: 35 mm Overhang: 110 mm Installation height: 140 mm

Year of construction: 1999, condition: used, Cutter diameter 250 mm Pneumatic workpiece clamps Manual feed Weight: approx. 160 kg Codpoywx D Njfx Abwjra

Year of construction: 1998, condition: used, 3-sided machining in one setting Speed: 12,000 revolutions per minute 2 pneumatic tracers at the bottom, 1 tracer at the top Pneumatic material clamping Minimum quantity spray device Milling area vertical (top): 330 x 130 mm Milling area horizontally (from the front or rear): 220 x 95 mm Crsdsywxywopfx Abwja Stroke: 110mm With side stops Weight: about 350 kg

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Crodpfx Abjywxwpswea Max. push length: 3000 mm

Year of construction: 2009, condition: used, Saw blade diameter vertical: 600 mm Saw blade diameter (horizontal): 500 mm Ejecting width: processing of profiles up to 300 mm at 90°, mitre tips up to 30° Profile height max. 280 mm Engagement depth: at 90° horizontal up to 185 mm / at 90° vertical up to 230 mm Material stop: swiveling 30° - 90° - 45° Material stop adjustable with detent points and display on the display Program control for automatic adjustment of the punch height, the angle, and the punching height Cedpfx Aboywtqdewsra Up to 6 programs can be stored Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Year of construction: 1991, condition: like new (used), Machine is fully functional. Now is in stock. Crjdpfxjhvrz Ts Abwea 6.000 mm

Year of construction: 1992, condition: good (used), Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS Cedoif Azfjpfx Abwora -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Year of construction: 1993, condition: used, machine/vehicle number: 24323, For corner joints transom and mullion for optional glue or nail holes Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Credpfjbnnwqjx Abwja Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: approx. 106 kg

Condition: used, for cutter Ø up to Max: 250 mm Cutter package height Max: 90 mm Gr. to edit profile height: 140 mm Cutting width up to: 350 mm Milling depth: 80 mm Spindle speed: 2800 RPM Credpfx Abob Nwb Tswoa Drive motor: 380 V, 2800 rpm, 2.2 Approximate weight: 95 kg Space requirements: 1050 x 700 x 530 mm

Condition: used, machine/vehicle number: 4 06A1 0214/26236, For corner joints transom and mullion for optional glue or nail holes Crsdpfx Absbnnwfjwoa Water drainage slots in frame and transom profiles recesses for SCHUeCO window handles Punching out of the locking bar groove on window sash profiles opening inwards and for opening window profiles punching force depending on air pressure (6 - 8 bar): 0,6 - 0,8 MPa Air consumption: 9 l/stroke Space requirement: 620 x 380 x 1250 mm Weight: 108 kg

Year of construction: 1972, condition: used, Working length up to: 3900 mm hydraulic drive: 220/380 V, 1400 rpm, 0,75 kW Space requirement: 600 x 4650 x 1000 mm Weight: approx. 250 kg Cedsbnnyiepfx Abwora in mobile version

Year of construction: 1994, condition: defective spare-parts repository (used), machine/vehicle number: 20 048 M100390 130003048, movements x/y/z: gross/klein 6500/300 mm spindle turning speed range: 5400 rpm number ob tool positions: 8 pieces carriages: x/y u. z 60/30 mm/miin spindle drive: max. 5,5 kW The machine is sold as a spare part carrier because the controller is defective. electrical connection: 400 V kW space needed: 8600 x 2270 x 2150 mm weight: ca. 5000 kg Crjdpfsz N T Sjx Abwsa

Year of construction: 1987, condition: good (used), for cutter Ø up to max .: 300 mm Saw stroke adjustable by hand: 550 mm Infeed by hand via spindle: 150 mm Height adjustment by hand via spindle approx .: 130 mm Table semicircle Ø: 500 mm Crsdpfxoghl Emo Abwea Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx .: 1000 x 900 x 1300 mm Weight approx .: 100 kg

Condition: used, This Elumatec profile machining centre, model SBZ 122/71, is being auctioned online in our industrial/machinery insolvency auction for metalworkers – Elumatec, vehicles, trailers, tools, sea containers, workshop equipment, and office fittings. Crsdeyxd Tlepfx Abwja

Year of construction: 2004, condition: excellent (used), functionality: fully functional, Notching saw for cut-outs and bevel notching. The machine is equipped with two saw blades, each with a diameter of 500 mm. It features a pneumatic clamping device. The feed is hydropneumatic and is triggered via two-hand control. The material stop is swiveling, with locking points and a digital display. Notching height and angle are motorized and digitally indicated. Max. profile height: 280 mm Max. notch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Cjdpsyzcpdjfx Abwora

Condition: excellent (used), Year of construction: 2008, Machining center with 3 CNC-controlled axes for processing profile bars or parts made of aluminum, PVC, non-ferrous metals, and steel up to 3 mm. The machine is equipped with an 8-position tool changer, allowing the integration of 2 angle heads and a disc cutter for 5-sided machining of the workpiece. Additionally, the machine features a movable worktable that facilitates loading and unloading, and increases the maximum processable profile cross-section relative to profile width. All CNC axes are absolute axes, eliminating the need for re-zeroing when restarting the machine. Clamping elements are automatically positioned by the X-axis, taking collision zones into account. The machine comes with the following accessories: Cjdsyzcnyspfx Abwora - CamPlus software - 8 tool changer positions - Second material stop for multiple setups or processing of overlength workpieces - MG Pilot hand control unit - Angle head - Tools - Barcode scanner The machine is in excellent condition and has only 3,467 operating hours! Installation, commissioning, and training can gladly be provided by us!

Year of construction: 2019, condition: excellent (used), functionality: fully functional, CNC machining center with 4 controlled axes and automatic spindle rotation (0-180°). This enables the machine to access all three profile sides of the workpiece without manual repositioning. It is suitable for machining profile bars or parts made of aluminum, PVC, light metal alloys, and steel up to 2 mm. The machine is equipped with a manual tool magazine with 9 slots and an automatic tool magazine with 4 positions on the left side of the enclosure. Additionally, there is a second automatic tool magazine with 4 positions on the right side of the enclosure. Profile positioning is achieved via a pneumatically actuated stop positioned on the left, while clamping is performed by 4 robust clamps that are automatically positioned and monitored. A second pneumatic stop on the right side enables the machining of large bars that are up to twice the length of the machining area (for overlength processing). A movable clamping area also facilitates loading and unloading of the workpiece and significantly increases the machinable cross-section. Csdsyzb Ekopfx Abwjra The machine is supplied with the following special accessories: - CamPlus software - an additional tool magazine - a second stop - a protective hood

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) -Cutting width: 350 mm Crodpfx Aoyvpm Sebwoa -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP Crodpfxsf D H Hbs Abwsa -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg