Used engraving machines for sale (128)

Condition: excellent (used), Year of construction: 2001, Laser marking system Fab. Baublys Typ. BL 150 S/NC 500 Year 2001 Technical data Manufacturer: Baublys Type: BL 150 S/NC 500 Year of manufacture: 2001 Laser: 150 Watt Laser type Q-switch pulsed solid-state laser Laser medium Nd:YAG Wavelength 1064 nm Beam diameter approx. 1.2 - 1.3 mm after decoupling mirror at TEM00 Beam divergence 5 mrad TEM00 Pulse duration (time) CW / 90 ns Max. Output power 65 W multimode 16 W single mode Pulse energy 16 mJ at 3 kHz Beam deflection system Galvanometer system Line thickness with mixed mode approx. 0.12 mm Deflection speed 3 m/s; this corresponds to 200 characters/s at a height of 1.5 mm and a single-line font Dimension: approx. Weight: approx. Power supply Voltage 400 V, three-phase current 50 Hz, 3 phases, clockwise rotating field Connection 5-pin CEE plug 16 A 6h Max. Power consumption 8.5 kW, max. 16 A per phase Fuse protection 3 x 16 A slow-blow Water connection Cooling water flow rate 7.5 l/min at 20°C flow temperature Connection thread to be discharged G 3/4" external thread Heat quantity approx. 6.5 kW Max. Cooling water temperature at inlet 20°C Water consumption dependent on inlet temperature Lrodpsq Abnnsfx Ab Esi Outlet temperature < = 35°C Ambient conditions for transportation and storage Temperature +5°C to +40°C Humidity < 70% Installation site Observe transport instructions Ambient conditions for operation Temperature +10°C to +40°C Humidity < 70% Installation location Observe transport instructions All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: new, Year of construction: 2025, A laser marker that can operate anything? Indeed! This is the Wattsan UV TT, an ultraviolet marker that works with a variety of materials, including leather, ceramics, glass, rubber, wood, leather, fabric, gems, organic and electrical components. The Wattsan UV TT is suitable for QR-codes, bar-codes, data and time, and any other images. This marker can operate big workpieces; the scanning tripod can be taken off and placed on the deck. Additionally, you may alter the machine's functionality by just switching out the lenses! You can give our managers a call for additional details! Wattsan UV TT machine characteristics: Working area: from 75x75 to 300x300 mm Laser power: 3/5/10/15 W Machine size: 880x420x1000 mm Packing size: 960x500x1100 mm Weight: 82 kg Laser sourse: JPT Lodpfx Ajr D Ngtsb Esri Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, Year of construction: 2025, A laser marking machine is an invaluable part of a production. Wattsan FL TT can mark or engrave QR codes, serial numbers, dates, and any picture you want onto items. This laser marker works with metals and their alloys. Plastic, fabric, leather, glass, and other materials are also within reach of a laser. The marker’s tripod can be removed and mounted on the ceiling, allowing you to operate work items of any size! Wattsan FL TT comes with the EzCad system, which allows you to edit text in real time. It also supports vector, bitmap, BMP, PLT, CDR, DXT, and AI formats, among others. You can give our managers a call for additional details! Wattsan FL TT characteristics: Working area: 300x300, 110x110, 200x200 mm Lrodjh Uc Dbspfx Ab Esi Laser power: 20-100 W Machine size: 740x400x740 mm Packing size: 820x490x850 mm Weight: 54 kg Laser sourse: RAYCUS, JPT (MOPA), IPG, MAX Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 20 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), machine/vehicle number: 16526, pattern table size: 320 x 440 mm working table size: 200 x 300 mm working area longitudinal: 250 mm working area cross: 220 mm spindle turning speed range: 1460 - 8550 rpm Lrsdpfsdlkwgox Ab Eji milling proportion: bei 1 : 1 ca. 105 x 165 mm spindle drive: 0,86 kW space needed: 1000 x 900 x 1320 mm weight: 360 kg

Condition: used, Year of construction: 2006, Type Scorpion (W/S) Year 2006 In our opinion, the machine is in good used condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of delivery Lrjdpjxrg Dkefx Ab Eji if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 100 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 400 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt Lsdpfxoywg Sbe Ab Eeri - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: used, Year of construction: 2023, For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the network using the SQL protocol or via the connection of Rs232 / Ethernet. Logo and Special Characters - Import and markup logo from images (BMP, JPG, PNG) and vectors (DXF, PLT, AI). Barcodes - Fixed and variable essence marking in 2D dot matrix codes QR codes barcodes. Adjustable marking parameters - Marking power, speed and frequency with line space and shape - Wiggle. Design support tools - You can customize your logos and schemes using the built-in character and design menu create. Or you can rearrange and tag your existing uploaded drawings. Marker location preview and pre-marking red beam simulation. Marking area X-Y Preferred:: 110x110mm / 150x150mm / 170x170mm / 200x200mm / 300x300mm, Laser technology: 1064nm - MOPA fiber laser with fixed pulse Yb and maintenance-free Laser power: 20W - 30W - 50W Frequency range: 1 - 600 kHz programmable Marking speed: max. 650 characters / second Weight 4U Laser Control Cabinet: 15 kg Lsdpfelfilysx Ab Esri Marking head with Z-column and table:: 10 kg Interface, communication: USB, Ext I / O configuration for automation systems, Standard hardware: Motorized and programmable fully automatic focusing system and its sensor Connected load: 300W (220V / 50Hz) Dimensions W x D x H: 717x360x754mm colour: Grey

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, workpiece weight (max.): 40 kg, input voltage: 220 V, type of input current: AC, laser power: 60 W, type of cooling: air, total width: 1,055 mm, total height: 967 mm, total length: 834 mm, overall weight: 102 kg, sheet thickness aluminum (max.): 254 mm, scan area length: 610 mm, scan area width: 610 mm, table length: 610 mm, table width: 610 mm, laser wavelength: 700 nm, extraction nozzle diameter: 100 mm, Equipment: cabin, 2022 Epilog Fusion Edge 24 – 60W CO₂ Laser Cutter & Engraver 2022 Epilog Fusion Edge 24 CO₂ laser engraving and cutting machine with 60W laser, IRIS™ camera positioning, BOFA AD Oracle extraction, air assist pump and Photo Laser Plus software. Very lightly used, professional-grade laser cutter for wood, acrylic, leather, plastics and more. Description Professional Laser Engraving & Cutting System – Very Lightly Used The Fusion Edge 24 is one of Epilog’s most advanced compact laser systems, combining industrial motion control, high-speed engraving technology, and intuitive operation. It is ideal for sign makers, workshops, educational facilities, makerspaces, and manufacturing businesses requiring precise engraving and cutting capabilities. Machine Overview Manufacturer: Epilog Laser Model: Fusion Edge 24 Year: 2022 Laser Type: CO₂ Laser Power: 60 Watt Power Supply: 220V Condition: Excellent – Very Lightly Used Included Equipment The sale includes a complete turnkey laser engraving system: Epilog Fusion Edge 24 – 60 Watt CO₂ Laser Engraver/Cutter BOFA AD Oracle Industrial Fume Extraction Unit Air Assist Pump / Compressor Photo Laser Plus Software Hose kit for extraction system All original components supplied from new Key Features *High-Speed Laser Engraving Lsdpeyug Rqofx Ab Ejri The Fusion Edge series delivers engraving speeds up to 120 IPS (3.05 m/s) with 5G acceleration, enabling rapid production without sacrificing precision. *IRIS™ Camera Positioning System Integrated dual overhead cameras provide a live view of the work area, allowing accurate placement of artwork directly on materials and reducing setup time. *Touchscreen Control Interface The system includes a 7-inch touchscreen display for easy job selection, autofocus control, and job trace positioning directly at the machine. *Industrial Motion Control Brushless DC servo motors Ground and polished stainless steel linear motion system Teflon-coated bearings for smooth operation *Network Connectivity The Fusion Edge supports Ethernet, USB, and wireless networking, enabling easy integration into production workflows. *Radiance™ Beam Optics Advanced beam control technology delivers high resolution engraving across the entire work table. Technical Specifications Maximum Engraving Speed: 120 IPS (3.05 m/s) Acceleration: 5G Work Area: 24" × 24" (610 × 610 mm) Maximum Material Thickness: 10" (254 mm) Laser Tube: Air-cooled metal/ceramic CO₂ tube Resolution: 75 – 1200 DPI engraving quality Memory: Up to 1GB file processing Motion System: Brushless DC servo motors BOFA AD Oracle Extraction System The included BOFA AD Oracle industrial fume extraction unit ensures a clean and safe working environment. Key Specifications Airflow: approx. 380–400 m³/hr HEPA H13 filtration with 99.997% efficiency at 0.3 microns Multi-stage filtration with activated carbon Noise level:

Condition: excellent (used), For sale: professional mobile industrial marking machine FlyMarker XL. Handheld device for permanent marking of metal parts using the dot peen method. Model: FlyMarker XL Power supply: 24 V DC Operated via built-in screen and keyboard Standalone operation, no need to connect to a computer Made in Germany Technical condition: Good, the device powers on and works. Screen and keyboard are fully functional. Visual condition: used, normal signs of wear. Applications: Serial number marking Technical and production markings Marking steel, aluminum, and other metals Included: FlyMarker XL marker Power supply Lredpfx Aboyhnu Do Eoi Cables Exactly what is shown in the photos Shipping or personal pickup available. If you have any questions, please contact me.

Condition: ready for operation (used), Year of construction: 2023, laser power: 120,000 W, Main Drive Lrjdpfx Ajx I S Nyeb Eoi Laser power 120 kW Technical Specification Engraving Speed 3000 m/s This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with a power range of 30–120 W and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. Application Types Other Sheet Metal Machinery

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used automatic wheel rim cleaning machine - BBS Lrodpsw Rrwzefx Ab Esi Manufacturer: Macchina Utensili Year of manufacture: 2000

Condition: used, Year of construction: 1969, functionality: fully functional, machine/vehicle number: Gel/1 02.0026, Used engraving machine Make: Franz Kuhlmann Lredpfeyg Rv Uox Ab Eji Serial No.: Gml/1 / 02.0026 with accessories

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: GE-50RAY, input voltage: 230 V, type of input current: DC, laser power: 50 W, type of cooling: air, total width: 530 mm, total height: 770 mm, total length: 796 mm, overall weight: 254 kg, warranty duration: 36 months, height adjustment type: electric, door opening width: 530 mm, door opening height: 300 mm, table length: 203 mm, table width: 430 mm, laser wavelength: 1,064 nm, input frequency: 100 Hz, Equipment: cabin, Seize the opportunity and secure the 50 watt, 100 watt or 200 watt fiber laser! We will be happy to provide you with further information or an individual offer. Contact us today and find out more about the benefits of these outstanding products. We offer brand new fiber lasers with German user software and operating instructions. These devices are very easy to operate without any programming knowledge and are ready for immediate use. Our services: Personal delivery and installation Setup and instruction on site or via remote connection Ongoing support for questions or problems Service and spare parts directly from Germany Technical details (depending on model): Laser power: 50 watts, 100 watts or 200 watts Wavelength: 1064 nm Frequency range: 20-100 Hz Marking field size: 150x150 mm (options: 50, 70, 110 mm head) Repeat accuracy: ± 0.003 mm Engraving speed: ≤ 7000 mm/s Marking software: EZCAD in German / English Pilot laser: Simple preview Laser class: 1 Working temperature range: 14-30 ℃ Focusing: Electric lifting column with motor control Max. Component height: approx. 300 mm Connection: 230V Cooling: Air-cooled Weight: approx. 170 kg (depending on model) Operating costs: Low Service life: Over 100,000 operating hours maintenance-free Equipment: Grid holes for fixtures Variety of materials: Marking of a wide range of materials Ledeu Tkclspfx Ab Eori Included: Head 150x150 mm, other sizes available CE declaration of conformity guarantee service German software Training for machines and programs Invoice Scope of delivery: USB cable power cable Stops USB stick with parameters Operating instructions in German Foot pedal Safety goggles Applications: Perfectly suited for texts, logos, vector data, QR codes, DMC codes, 2D codes, variable data sets and image engraving. Our fiber lasers are ideal for engraving and tempering metals as well as marking or decorating plastics and coated materials. Software: EZCad 2.14.0 in German Compatible files: *.DXF, *.PLT, *.AI, *.JPC, *.BMP, *.JPG, *.JPEG, *.GIF, *.TGA, *.PNG Service: We carry out the service ourselves and have the largest spare parts in stock right here in Germany to guarantee you fast and efficient support. Shipping and installation: With shipping, we connect the machine to you remotely, set it up and give you brief instructions. Alternatively, we deliver it in person, install it, set it up and instruct you. The price is agreed depending on the zip code. Consultation: For detailed advice, visit our website or call us directly. We will be happy to answer all your questions. Additional options: 100 watt and 200 watt models are also available on request - ideal for larger projects or higher power and speed requirements!

Condition: ready for operation (used), Year of construction: 2022, total height: 455 mm, overall weight: 63 kg, This EPILOG Laser Fusion Edge 12 30watt fiber was manufactured in 2022. It features a 610x305mm work surface and a maximum Z-depth of 178mm. The machine operates with a 30-watt fiber source and achieves speeds up to 120 IPS (3.05m/s) with 5G acceleration. Weighing 63kg, it's designed for precision in fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the EPILOG Laser Fusion Edge 12 machine we have for tact us for more information. Additional equipment • Source: 30-watt Fiber • Speed: 120 IPS (3.05m/s) with 5G acceleration Machine Benefits Technical Machine Benefits • Maximum z-depth: 178mm Lsdpox U Tmgofx Ab Eeri • Work surface: 610x305mm Extra Information Machine still under power Dimensions Machine Depth 1003 mm

Condition: ready for operation (used), Year of construction: 2009, total height: 2,370 mm, overall weight: 2,500 kg, product length (max.): 2,850 mm, This 4-axis DMG Lasertec 40 laser engraving machine was manufactured in 2009. It features a picosecond laser with an average power of 50W and a wavelength of 1064 nm. The machine offers a travel range of X=400 mm, Y=300 mm, and Z=500 mm, with maximum feed rates of 15 m/min for X and Y axes and 12 m/min for the Z axis. Consider the opportunity to buy this DMG Lasertec 40 laser engraving machine. Contact us for more information. • Machine footprint (incl. operation/maintenance with extraction): Depth 3.5 m, Width 3.0 m, Height 2.5 m • Weight with X-Y table: approx. 2,500 kg Lredpfx Ajya Ah Ajb Esi • Machine power consumption (with laser and cooling unit): 16 kVA • Fuse: 40 A at 400 V • Operating voltage: 3/N/PE/400 V/230 V 50 Hz • Maximum permissible deviation: ±10% • Control voltage: 24 V DC • Permissible ambient temperature: +15°C to +35°C • Permissible relative humidity: max. 75% at 20°C • Travel range (with X-Y table): X = 400 mm (longitudinal), Y = 300 mm (transverse), Z = 500 mm (vertical) • Table size: 400 x 300 mm • Feed drive: Digitally controlled AC motor and ball screw in each linear axis • Maximum feed rate: X/Y: 15 m/min; Z: 12 m/min • Guides: Ball screw guides in all linear axes • Measuring systems: X, Y, Z indirect linear encoder • Machine accuracy: P = 0.010 mm (VDI/DGQ 3441) • Laser type: Picosecond laser • Average laser power: 50 W • Wavelength: 1064 nm • Scanner: Planar field lens; focal length 163 mm; field size 65 x 65 mm • Lubrication: Manual central lubrication • Electrical control cabinet: with cooling unit (integrated into the machine) • Cabin: Fully enclosed cabin including roof; laser safety screen (optionally multiple); optimal operator access

Condition: like new (used), Year of construction: 2012, operating hours: 10 h, functionality: unexamined, machine/vehicle number: 50022358, laser power: 200 W, overall weight: 1,000 kg, The machine has never been in operation and is therefore like new. I have never started it myself, so I cannot say much about it. If the buyer is familiar with the machine, it may be possible for us to connect it to power before purchase. Lredpfx Asx It Abob Eei

Condition: ready for operation (used), Year of construction: 2008, This 3-axis Baublys Control Laser UL 65QR/NC 100 50 50 SOMA was manufactured in 2008. It features a Q-switched solid-state Nd:YAG laser, capable of reaching frequencies up to 50 kHz. The machine includes a round transfer table of approximately 75 cm and is housed in a 2.4 x 2.6 meters enclosure. If you are looking to get high-quality laser marking capabilities consider the Baublys Control Laser UL 65QR/NC 100 50 50 SOMA machine we have for tact us for more information. Lodpex Sz Efsfx Ab Eeri Application Types Other Sheet Metal Machinery

Condition: used, Engraving machine including templates Lredpfx Aeywd I Heb Esi

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, laser power: 30 W, type of cooling: air, scan area length: 150 mm, scan area width: 150 mm, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) - optional: digital height measuring system - optional: autofocus system - system for automatically determining the focus distance - EZCAD marking software in German / English Ljdpfxewkpx Rs Ab Ejri - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Condition: new, Year of construction: 2026, functionality: fully functional, laser power: 30 W, type of cooling: air, overall weight: 45 kg, height adjustment type: electric, scan area length: 110 mm, scan area width: 110 mm, laser wavelength: 1,064 nm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the system is very practical and can be used anywhere. The universal laser marking system LAS 22 from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20 or 30 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a handheld scanner is also possible. The standard equipment includes a laptop with Windows operating system and laser software. Optionally, the laser model LAS 22 can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Lredpfx Aeuy H Nqeb Eei - Fiber laser 30 Watt (Optional: 20 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with pinch protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: not inspected (used), Year of construction: 2003, functionality: unexamined, machine/vehicle number: P3000-03-10-04798, pressure: 5.5 bar, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the specified periods, either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Pressure: 5.5 bar MACHINE DETAILS Lrsdpfx Abeyniyzo Eji Voltage: 115/230 V Frequency: 50/60 Hz Power: 120 VA Dimensions & Weight Dimensions (L x W x H): 550 x 300 x 700 mm Machine weight: 30 kg External reference: Lot 1 / Wittner

Condition: new, Year of construction: 2025, Marking hero EXKLUSIV XL Industry 4.0 - Model 2025 Metal - plastics and much more! - EZCAD 3 (real 64bit card) with up to 4 axes - Windows Professional 64bit suitable - Professional MOPA fibre laser source JPT with 20 Watt power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for colour marking) - ‘DigiScan Eco 10’ scanner unit for detailed and precise results - T-slot plate from Isel for easy attachment and positioning of your workpiece - Sliding door at the front with large viewing window and certified laser safety screen made in Germany incl. monitoring -> Door opening 450 mm - Side sliding door on the left incl. monitoring for long parts -> door opening 400 mm - Clear control panel with Siemens buttons - Scan area approx. 100 x 100 mm (optional 150/200/300 mm) - Motorised height adjustment with focus finder - Stand housing made of aluminium profiles with two man. Doors for easy, user-friendly and safe marking Laser class 1 - Substructure of the stand housing with Rittal control cabinet and integrated extraction point - LED workspace lighting made in Germany - High-performance MiniPC with 32 GB - 21’ TFT touch screen for fatigue-free working - Professional marking software in German language - Barcode and QR code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder via matrix over 2 parameters (e.g. frequency to speed, frequency to power) Lrsdpfxswga Hwe Ab Esi - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This enables the simple integration of external components such as camera position detection etc. - Industry 4.0 The status can be processed at any time via the TCP/IP protocol - Inputs and outputs for automation - 3D preview for rotary axis machining - Performance increase of up to 50% thanks to 64-bit technology - Improved stability - Optional up to 4 axis control WITHOUT switching via PLUGins - Optional DEEP engraving (slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching - Completely redesigned Galvo generation (Eco, Hi-Speed & 3D) with 2-fold laser pointer for visual checking of the focus position - Connection option for external suction - Software suitable for Windows 10 - USB cable for connecting to the computer - Operating instructions and operating software in german and english Among other things, we offer the following options: =ᐳ IPG or SPI fibre laser sources in various powers =Scanlab equipment =Suitable extraction systems =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking function =ᐳ Automatic focus adjustment via special laser sensor =ᐳ Rotary unit in various versions =ᐳ Motorised slides in X and Y =ᐳ Interlock system for labelling WITHOUT protective housing, but only with personal protective equipment for bulky parts incl. training in Schweinfurt! Our engraving lasers are manufactured at our factory in Schweinfurt! Individual requests are therefore possible at any time! =ᐳ Made in Schweinfurt! Images may contain options! We are your partner for laser markers. Whether manual or automatic laser labelling system. We will be happy to make you an offer.

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Tempering metals =ᐳ Marking many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings using the JPT-MOPA system fiber laser source (variable pulse width on request) Easy to operate and handle! Our exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix using 2 parameters • TCP IP connectivity for external components • Industry 4.0 the status can be processed at any time via the TCP/IP protocol. • Input and output Outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64Bit • Improved stability thanks to integrated control card • Optional control of up to 4 axes (integrated) Lrjdpfjd S H Nvex Ab Eji • Optional DEEP engraving with Z-axis • More powerful algorithms for fast hatching. • Completely redesigned Galvo generation • 2-way laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • Protective housing in accordance with laser class 1 • Including 4 hours of training in our training center (max. 2 people) Do you need individuality? Of course. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for assembly =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and ENGRAVING function. =ᐳ Automatic focus adjustment =ᐳ Rotating unit =ᐳ Motorized slides =ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser marking, laser marking, laser engraver, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser, marking hero

Condition: new, Year of construction: 2025, Model 2025 for Industry 4.0! Laser marking system for: =ᐳ Marking =ᐳ Tempering metals =ᐳ Marking many materials =ᐳ Deep engraving Extremely detailed and high-contrast engravings using the JPT-MOPA system fiber laser source (variable pulse width on request) Easy to operate and handle! Our exclusive XL laser marking system is characterized by: • Professional fiber laser source JPT MOPAfix 20 or 30W power • 1064nm, 20-400 kHz (for perfect engravings) • Scanner unit "New Generation ECO" • 19" PC control, no external card! • Very large viewing window with certified laser safety glass • Scanning area approx. 150 x 150 mm • Electric height adjustment • Full enclosure with 4 rollers • "weightless" lifting door for safe marking. EZCAD III software: • Barcode and QR code support • Serial number function • Batch scanning from Excel file • Laser parameter finder via matrix using 2 parameters • TCP IP connectivity for external components • Industry 4.0 the status can be processed at any time via the TCP/IP protocol. • Input and output Outputs for direct communication • New look and feel and fresh design • Even clearer and more intuitive operation • 3D preview for rotary axis processing • Performance increase of up to 50% thanks to 64Bit • Improved stability thanks to integrated control card • Optional control of up to 4 axes (integrated) Ljdpfod Athmsx Ab Esri • Optional DEEP engraving with Z-axis • More powerful algorithms for fast hatching. • Completely redesigned Galvo generation • 2-way laser pointer for checking the focus position. • LED lighting of the marking area • Connection option for external extraction • Start button and EMERGENCY STOP on the housing • USB and network connection for data access • Operating instructions and operating software in German • Protective housing in accordance with laser class 1 • Including 4 hours of training in our training center (max. 2 people) Do you need individuality? Of course. Choose from our wide range of accessories: =ᐳ Camera systems for object recognition =ᐳ Fiber laser source in almost all variations =ᐳ Motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ Automation for assembly =ᐳ Conveyor belts for infeed and outfeed =ᐳ 3D marking and ENGRAVING function =ᐳ Automatic focus adjustment =ᐳ Rotating unit =ᐳ Motorized slides =ᐳ Interlock system for labeling WITHOUT protective housing, but only with PPE (personal protective equipment) for bulky parts Our engraving lasers naturally allow for individual requests in terms of design and size! =ᐳ Made in Schweinfurt! Images may contain options! Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser Laser engraving machine, laser marker, laser marking, laser labeling, laser engraving, laser engraver, laser marking, laser marking, laser engraver, laser marking, laser marking, laser engraver, laser engraving, laser engraving machine, laser engraving machine, laser marking machine, laser marking system, laser marking system, laser marking system, labeling laser, marking laser, marking hero

Condition: new, Year of construction: 2025, functionality: fully functional, laser power: 20 W, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German Lrjdpfjuxnwmex Ab Eji As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.