Condition: good (used), LynetteTip height 330 mmDiameter 185 mmFoot length 330 mmFoot width 140 mmg.width 600 mmg.height 650 mm Giedpfx Anod S Algsxsu

Condition: excellent (used), Year of construction: 2010, Four-jaw chuck 27974 Diameter 250 mm 4 individually adjustable jaws Holder: long taper diameter 80 mm with external thread 125 x 3 mm Keyway 10 mm fe with flange and jaws 193 mm Giedsfimg Hspfx Anxsu Weight 29 kg Age is estimated

Condition: good (used), total width: 2,000 mm, total length: 3,500 mm, total height: 250 mm, overall weight: 5,250 kg, plate height: 350 mm, T slotted bed plate ASQUITH - ST-35 T slotted cast iron floorplate 3500 x 2000 x 250 mm MACH-ID 6474 Make: ASQUITH Type: ST-35 Floorplate Length: 3500mm Giedpowp D S Nsfx Anxeu Floorplate Width: 2000mm Height: 250mm No. Of T-slots: 8 Distance from T to T-slot / Jump:285mm T -slot size: 36mm Number of matching pieces: 1 Length: 3500mm Width: 2000mm Height: 250mm Weight: 5250kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1994, condition: good (used), Sheetmetalworking tooling Giodpozc Iztofx Anxou Multi V Lower tooling 75 x 75 x 3100 mm MACH-ID 4131 Type: Multi V Lower tooling 75 x 75 x 3100 mm Year: 1994 Total length:3100mm Total hight:75mm Length: 3100mm Width: 75mm Height: 75mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Gjdpfjzc Izgox Anxoiu Multi V Lower tooling 140 x 140 x 6000 mm Total length:6000mm Total hight:140 x 140mm V-size: 8 - 10 - 16 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Sheetmetalworking tooling Giodpfxezc Iyps Anxju Multi V Lower tooling 100 x 100 x 5400 mm Total length:3100mm Total hight:75mm V-size: 10 - 20 - 24 - 30 - 40mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1994, Metal cutting Tooling COLOMBO & LENNA - 600 MACH-ID 4214 Make: COLOMBO & LENNA Godpfezc Ix Esx Anxeiu Type: 600 Year: 1994 Diameter: 600mm 4 chuck: x Spindle bore:115mm Connector: 11 Diameter 600 mmConnection Camlock 11Bore 115 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2009, Metal cutting Tooling SMW AUTOBLOK - W-325-S MACH-ID 5119 Make: SMW AUTOBLOK Type: W-325-S Year: 2009 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Giedjzc Ivqjpfx Anxju

Condition: excellent (used), Metal cutting Tooling KITAGAWA - H0H - 06K MACH-ID 5205 Make: KITAGAWA Type: H0H - 06K 3 chuck Gisdezc Itcopfx Anxsu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, Metal cutting Tooling Gedpfx Aozc Iq Uenxeiu SMW AUTOBLOK - 210 BB MACH-ID 5208 Make: SMW AUTOBLOK Type: 210 BB Year: 2010 3 Chuck Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 4,800 kg, total height: 390 mm, total length: 4,660 mm, total width: 2,100 mm, T slotted bed plate STOLLE - SDT Cast iron floorplates 4660 x 2100 x 390 mm (5x) there is a 3e (shorter) plate avaielebl in size 3050 x 2100 x 390 mm    Gsdpfszc Im Nex Anxjiu Vloerplaat lengte: 4660mm Vloerplaat breedte: 2100mm Vloerplaat dikte: 390mm Aantal T gleuven: 7 Sprong / Hart op Hart: 300mm T -slot size: 28mm Gewicht per plaat ca.: 4800kg Number of matching pieces:2,5 Lengte: 4660mm Breedte: 2100mm Hoogte: 390mm Gewicht: 4800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2020, Metal cutting Tooling NIKI AG - 90 Niki AG machine vice / clamping system 90 mm Gijdpfx Aozc Ilfenxsu MACH-ID 6393 Make: NIKI AG Type: 90 Year: 2020 Grinded clamps 0,02 mm Clamp force 2 T Modulare setup Flexibel& Compatibel Clamp width: 90mm Max. opening: 400mm Manuel or hydraulic: Manuel Number of matching vices:10 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6435 Make: NIKI AG Giodpfxezc Ikne Anxsu Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1990, overall weight: 10 kg, total length: 340 mm, total width: 125 mm, total height: 80 mm, Metal cutting Tooling Gisdezc Ii Rspfx Anxju NIKI AG - HD 125 Machine Vice 115 mm width MACH-ID 6436 Make: NIKI AG Type: HD 125 Year: 2010 Clamp width: 115mm Max. opening: 110mm Manuel or hydraulic: Manuel Number of matching vices:10 Length: 340mm Width: 125mm Height: 80mm Weight: 10kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 8,800 kg, total height: 400 mm, total length: 4,000 mm, total width: 2,100 mm, T slotted bed plate STOLLE - RTS Cast iron floorplates 4000 x 2100 x 400 mm (2x) MACH-ID 6442 Make: STOLLE Type: RTS Year: 1995 Floorplate Length: 4000mm Floorplate Width: 2100mm Height: 400mm No. Of T-slots: 7 Distance from T to T-slot / Jump:300mm T -slot size: 36mm Weight a plate approx.: 8800kg Number of matching pieces: 1 Gjdpszc Ihtjfx Anxeiu Length: 4000mm Width: 2100mm Height: 400mm Weight: 8800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 5,600 kg, total height: 400 mm, total length: 4,000 mm, total width: 1,875 mm, T slotted bed plate UNION - DT Cast iron floorplate 4000 x 1900 x 400 mm Giodpozc Ihgsfx Anxeu Floorplate Length: 4000mm Floorplate Width: 1875mm Height: 400mm No. Of T-slots: 6 Distance from T to T-slot / Jump:315mm T -slot size: 36mm Weight a plate approx.: 5600kg Number of matching pieces: 2 Length: 4000mm Width: 1875mm Height: 400mm Weight: 5600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2010, overall weight: 3,200 kg, total height: 353 mm, total length: 4,000 mm, total width: 1,000 mm, T slotted bed plate STOLLE - TRD Cast iron floorplate 4000 x 1000 x 355 mm MACH-ID 6445 Gijdpfx Anezc Igvsxou Make: STOLLE Type: TRD Year: 2010 Floorplate Length: 4000mm Floorplate Width: 1000mm Height: 355mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm T -slot size: 42mm Weight a plate approx.: 3200kg Number of matching pieces: 1 Length: 4000mm Width: 1000mm Height: 353mm Weight: 3200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1995, overall weight: 4,000 kg, total height: 300 mm, total length: 4,500 mm, total width: 1,000 mm, T slotted bed plate STOLLE - 4500 x 1000 Cast iron floorplate 4500 x 1000 x 300 mm Floorplate Length: 4500mm Floorplate Width: 1000mm Height: 300mm No. Of T-slots: 4 Distance from T to T-slot / Jump:250mm Gisdpfx Aozc If Eenxeu T -slot size: 30mm Weight a plate approx.: 4000kg Number of matching pieces: 1 Length: 4500mm Width: 1000mm Height: 300mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2000, overall weight: 5,500 kg, total height: 365 mm, total length: 4,500 mm, total width: 1,750 mm, T slotted bed plate STOLLE - RDG Cast iron floorplates 4500 x 1750 x 365 mm (2x) MACH-ID 6452 Make: STOLLE Type: RDG Year: 2000 Floorplate Length: 4500mm Floorplate Width: 1750mm Height: 365mm No. Of T-slots: 5 Gjdpozc Idbjfx Anxeiu Distance from T to T-slot / Jump:320mm T -slot size: 36mm Number of matching pieces: 2 Length: 4500mm Width: 1750mm Height: 365mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), overall weight: 14,000 kg, total height: 455 mm, total length: 5,500 mm, total width: 2,420 mm, T slotted bed plate STOLLE - DT-4/2 T slotted cast iron floorplate 4000 x 2420 x 455 mm Floorplate Length: 5500mm Floorplate Width: 2420mm Height: 455mm No. Of T-slots: 6 Distance from T to T-slot / Jump:400mm T -slot size: 42mm Weight a plate approx.: 14000kg Number of matching pieces: 2 Length: 5500mm Width: 2420mm Height: 455mm Weight: 14000kg Gjdjzc Ibmspfx Anxeiu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, overall weight: 21 kg, T slotted bed plate BWF - RK-4 MACH-ID 8883 Make: BWF Type: RK-4 Year: 2004 Length:275mm Width:180mm Height:115mm Weight:21kg Gedpfxozcu I Tj Anxeiu Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 24 mm -Dimensions: see photo technical drawing Giodpfszcwpysx Anxju -Overall dimensions: 90/70/H70 mm -Total weight: 2.2 kg

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Chuck size Ø 190 mm -Passage: Ø 60 mm -Bolt circle: Ø 170 mm -Interchangeable jaws: available in a wide selection, can be supplied for an additional charge -Dimensions: Ø 190 x 100 mm -Weight: 9.2 kg Gijdpfx Anjzcwmxexsu

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck Godpfx Anozcu Srexjiu -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Year of construction: 2021, condition: excellent (used), STOPA understands what storage means. For this reason, the perfect UNPACKING TABLE has been developed to speed up the process of unpacking and depalletizing sheet metal packages. Increase your productivity by more easily separating sheet metal stacks from their carrier pallets. The unpacking table features a movable stamp frame on which the sheet metal package is placed at an ergonomic height. The packaging can now be easily removed, and the wooden pallets fall downwards. With the help of a forklift or crane, the sheet metal package can then be directly transported to the INCOMING GOODS STATION. Experience how easy unpacking can be. Ideal for any sheet format! Giodpfxjzcpmqj Anxou