Used Fordson Power Major for sale (40,199)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 620, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Note: The machine is located on the first floor. TECHNICAL DETAILS Travel range X-axis: 600 mm Travel range Y-axis: 420 mm Travel range Z-axis: 450 mm Distance spindle nose – table: 120–570 mm Speed range: 60 – 12,000 rpm Torque: 70 Nm (S6, 40 %) Spindle power: 11 kW (40 %) Spindle cooling: Oil/air Tool holder: SK40 Pull stud: DIN 69871/72 Table dimensions: 750 × 420 mm Number of T-slots: 5 T-slot width: 14 mm H8 T-slot spacing: 65 mm Rapid traverse X/Y/Z: 32 Feed rate: 1 – 12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Lsdpfx Aszzlh Hol Tehl Tool positions: 30 Tool change time: 1.5 s Maximum tool weight: 6 kg Maximum tool diameter: 76 mm Maximum tool length: 250 mm MACHINE DETAILS Control system: Heidenhain iTNC 620 Central lubrication: R68 (ISO 68) Hydraulic oil: R32 (ISO 32) Compressed air connection: 3/8" Compressed air: 6–8 bar Power supply: 400 V Fuse rating: 63 A Connected power: 25 kVA Coolant tank: 160 l Linear guides X/Y/Z: 30/35/35 mm Machine bed: Meehanite casting Machine weight: 4,000 kg EQUIPMENT Heidenhain iTNC 620 CNC control system Digital Heidenhain drive technology Ceramic-bearing precision spindle Separate spindle cooling for constant temperature Integrated chip conveyor Maintenance-free Siemens spindle motor THK linear guides in all three axes 30-position tool changer with double gripper Central lubrication Large access door to the work area Loading possible from above using an overhead crane Two waterproof work area lights CE certification The height and weight of the asset must be taken into account when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty or guarantee. The information on the technical data comes from the original offer. No liability is assumed for printing and measurement errors. In case of doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2020, operating hours: 7,597 h, functionality: fully functional, machine/vehicle number: NL257200651, turning diameter: 366 mm, spindle speed (max.): 4,000 rpm, controller model: Mitsubishi 730UM CELOS, working length: 700 mm, number of slots in tool magazine: 12, TECHNICAL DETAILS Maximum machining length: approx. 700 mm Maximum turning diameter: 366 mm Workpiece length with tailstock: max. 728 mm Spindle speed: max. 4,000 rpm Tool turret: 12-position BMT60 star turret Tool drive: 40 / 14 Nm Speed of driven tools: max. 10,000 rpm Overhang length of driven tools: 100 mm Chuck: 10" hollow chuck, Ø 254 mm Chuck cylinder: hollow chuck cylinder BB210A821 Tailstock: NC tailstock Tailstock taper: MK 5 MACHINE DETAILS Coolant type: water-miscible coolant / emulsion Coolant pressure: 5 bar Extraction connection: Ø 150 mm Mains voltage: 380 V Frequency: 50 Hz Transformer power: 45 kVA Phases: 3 phases Isolation transformer: 400 V ± 5 % Current: 65 A Control system: Mitsubishi 730UM CELOS User interface: CELOS with ERGOline touch panel Machine operating time: 7,597 h Program runtime: 2,138 h Last maintenance: April 2024 Weight: 5,800 kg EQUIPMENT DMG MORI M730UM control system with CELOS ERGOline touch panel 12-position BMT60 star turret with driven tools 10" hollow chuck, Ø 254 mm Hollow chuck cylinder BB210A821 Double foot switch with protective cover NC tailstock with MK-5 mount Oil-air cooler for circulating spindle coolant Hinged belt chip conveyor High-pressure coolant system, 5 bar Oil mist separator AFS 1100 including interface Manual, swiveling tool pre-setter SCHNEIDER transformer 45 kVA Technology cycle "Alternating Speed" Further technical data can be found in the document attached! Lhedszy Hx Dopfx Al Tsl

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Lhsdpfx Aljzl D Exe Tol Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, Year of construction: 2015, Technical details: table length: 3000 mm table width: 1500 mm burner heads: 1 X-axis : 3000 mm y-axis: 1500 mm z-axis: 150 mm max. plate thickness : 20 mm weight of the machine ca.: 10 t 1 used CNC laser cutting system PRIMA POWER PLATINO FIBER Switching hours as of June 2024: 65,043 h Incl. - FIBERLASER power source IPG YLS4000 incl. chiller - Incl. STIMA automatic loading and unloading device for raw material and processed sheets for 2D laser machines Compat Server (compact tower) Manufacturer description: The Platino Fiber laser cutting machine is a result of the perfect balance of innovation and experience. This product combines state-of-the-art efficient and ecological fiber laser technology with the proven reliability and flexibility of the Platino platform. The Platino Fiber can be used to cut a variety of materials. Fiber lasers are more effective than other laser sources at cutting highly reflective materials (e.g. aluminum alloys, copper, brass). The Platino Fiber cuts various thicknesses, up to 20 mm of mild steel, with efficiency and quality. The productivity increases are particularly noticeable with thin to medium-sized sheets. Compact servers: is a loading and unloading device for handling blanks and processed sheets. Compact Server consists of two storage units - one for blanks and one for processed sheets. All components of the Compact Server are located above the automatic pallet changer and therefore require no additional floor space. The advantages of these solutions are: reliability, compactness and easy management of loading/unloading operations. The newest product from SPR Italy is a highly sophisticated automation system that combines many innovative solutions that are subject to SPR patents. The system is capable of unmanned operation and provides storage, loading and unloading within the smallest footprint possible. The tower is built above the shuttle table and the loading and unloading is done with the elevator that can be installed on either side of the tower. Simple operation and state of the art PLC contribute to a friendly integration and provide real productivity gain. The system is so compact that it became the top selling automation product, with many hundred of them sold world wide in just few years since it was launched. Compact Tower CT 1530 is capable to store a maximum of 54 ton of raw sheets dim. 1500x3000mm stacked in18 locations, with 80mm each stack, and to load raw sheets onto the machine table and unload processed sheets thereafter. For this example we will use a 18 pallet tower such as we already installed in Melbourne this year. The scope of the work includes the software implementation, the tests of the units at SPR factory, shipment, documentation and supervision during installation, start-up and commissioning Concrete foundation to the engineering specifications, civil works, mains electrical supply, permits and the base plates must be supplied by Customer. Major components The Compact Tower is composed with following main units: - tower to store the stack of sheet - elevator to move the pallet on which the stack of sheet is laid - table with fixed pins where the operator load the stack of sheet - gripper with suction cups Ljdpfx Aljzlic Ne Tehl - light barriers - electric cabinet with control panel - set of safety fences General features: Sheet format max. 3.100×1.570mm Max weight 3.000Kg per stack Max height stack

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 32,225 h, machine/vehicle number: 756 71 004, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Prima power, controller model: Nc Express / Tebis, laser type: CO₂ laser, laser source model: Prima power, laser hours: 9,996 h, laser power: 4,000 W, laser wavelength: 600 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 10 mm, table length: 3,000 mm, table width: 1,500 mm, input voltage: 400 V, input current: 62 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, total length: 10,000 mm, total width: 4,000 mm, total height: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, Prima Power Domino LSR 2-3, a highly flexible and precise 5-axis 3D laser cutting machine, ideal for complex trimming and cutting of formed sheet metal components.Machine in good working condition, the machine is production today and will be available from 25/10 -2026 Ljdpfx Ajzg Hivjl Tehl

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 36,167 h, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, workpiece weight (max.): 1,850 kg, type of cooling: water, overall weight: 110,000 kg, total length: 12,600 mm, total width: 1,080 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Prima Power Laser Genius LGf 2040 – 4 kW – Year 2019 For sale: Prima Power Laser Genius LGf 2040, a high-performance fiber laser cutting machine manufactured in 2019, with a laser power of 4,000 W and a working format of 4,000 × 2,000 mm. This Italian-made machine is equipped with linear motor technology, providing high travel speeds, excellent dynamics, and high precision. The Laser Genius series is designed for intensive industrial production and cutting of carbon steel, stainless steel, aluminum, copper, and other metals. Ledpfjzz N Dfox Al Tshl Key technical data: Manufacturer: Prima Power / Prima Industrie S.p.A. Model: Laser Genius LGf 2040 Year of manufacture: 2019 Serial number: Z3.03.02.09 Technology: Fiber laser Laser power: 4,000 W / 4 kW Working area: 4,064 × 2,032 mm Z-axis stroke: 150 mm Maximum X/Y speed: 200 m/min Maximum simultaneous speed: 240 m/min Positioning accuracy: 0.03 mm Repeatability: 0.03 mm X/Y drive via linear motors Automatic table exchange system Approximate machine weight: 11,000 kg Approximate maximum cutting capacities with 4 kW: Carbon steel: up to 20 mm Stainless steel: up to 15 mm Aluminum: up to 8 mm Copper: up to 8 mm The machine stands out for its large format of 2,000 × 4,000 mm, high dynamics, and precision, making it a particularly suitable solution for industrial sheet metal production. Machine available for inspection. More information, photographs, operating hours, and additional equipment are available upon request.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer! Ljdpjyt Emnofx Al Tjhl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For Sale — Buhrs B5000 Paperwrapper (2015) — Only 11,055,783 cycles, up to 24,000 pph Model: Buhrs B5000 paper wrapping / mailing system Year: 2015 Total cycles: 11,055,783 (low usage — counter photo attached) Rated speed: up to 24,000 packages per hour Condition: Very good and fully operational; clean mechanics and controls; maintained on schedule Location: USA Included: Complete integrated system : Rotary feeder, automatic product loader/conveyor for rotary feeder products, gathering section, PPU ( product positioning unit ) wrapping section, eject station, product discharge conveyor, Buhrs data controller, Domino k600i inkjet, Nordson Blue 7 glue system with 2 heads and 2 hoses, manuals. Additional feeders/conveyors can be discussed during inspection. Inspection: Available under power by appointment; video test available on request. Logistics: Professional dismantling/packing and worldwide shipping can be arranged. Shipping is extra — within the US estimated at USD 2,000; to a major European port estimated at USD 3,000 (final quote depends on destination). Terms: EXW USA by default. Bank wire; 100% prior to loading into a truck or sea container. Location: Wisconsin, USA Availability: Immediately Ownership: Direct sale from Himin Industries Inc., not brokered Asking price: €139,000 — ONO — price without VAT (export sale) Export sale from USA – no VAT charged by the seller. Local VAT and import duties, if any, are payable by the buyer in his country. Lhsdpfexdn Nrjx Al Tjl Machine was used in a clean and climate-controlled environment and is in excellent mechanical and optical condition. We can assist with international shipping, crating, and export documentation. Video and inspection available upon request. Direct sale by owner. No brokers. Serious inquiries only.

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Ljdpjy Efbkefx Al Tehl

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Lhjdpfxjz A Irue Al Tol Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Year of construction: 2012, condition: refurbished (used), functionality: fully functional, machine/vehicle number: E22MH12032292919, This combination oven from the premium manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 or 40 x 1/1 gastronorm trays, in an electric version, manufactured in [year]. The unit has undergone a thorough inspection in our in-house workshop and is fully functional. Manufacturer's list price: €32,260.90 gross, equivalent to €27,110 net. Our price: Please inquire. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This appliance is the optimal choice if you are looking for a classic combination oven that you would like to operate manually. Our used equipment service for you: 6-month warranty on all electrical parts High-quality branded equipment at fair prices Professional refurbishment / inspection & expert cleaning Tested & fully functional Flexible options for shipping or self-collection Lodpfx Asz Ea Uyol Tehl Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The CombiMaster® Plus from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 1084 x 996 x 1782 mm Minimum door opening dimensions for transport (W x H): 1145x1900mm Power connection: 400 V / 67 kW / 50-60 Hz Weight: approx. 334 kg Serial number: E22MH12032292919 Year of manufacture: 03/2012 Condition: used, major inspection performed, fully functional Further details: Possible applications: Steam operation: from 30° C to 130° C Convection operation: from 30° C to 300° C Combination operation: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the optimal serving temperature in the ideal climate Automatic separation of fat for clean cooking chamber air Manual cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every type of food Ventilated double-glazed door (swiveling for easier cleaning) LED cooking chamber lighting Core temperature measurement by means of sensor Cool-down function High-performance fresh steam generator (automatic rinsing and emptying) Handheld spray gun with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors. Do you have any questions, would you like advice, or would you like to see something on site? You can reach us by telephone during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Lhsdpfx Ajz D Ihfol Tol

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system Lhsdpfx Ajy Ed S Ijl Tsl 2 CCD cameras Teka extraction unit ECO-Cube

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW Ljdpsyxy D Tefx Al Tjhl - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works Lhodswv U N Sopfx Al Tel On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Year of manufacture: 2024 – fully functional. Ledpfsznh Rkox Al Tohl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, pressing force: 135 t, stroke length: 400 mm, operating speed: 200 mm/s, oil tank capacity: 150 l, overall weight: 9,500 kg, travel distance X-axis: 625 mm, controller manufacturer: ESA, controller model: ESA S550N, working width: 3,050 mm, bending force (max.): 135 t, back gauge speed R-axis: 50 mm/s, back gauge travel distance R-axis: 180 mm, back gauge travel distance Z-axis: 2,100 mm, control type: CNC control, degree of automation: automatic, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 8, type of crowning: CNC-controlled, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, A very well-equipped machine with Y1 / Y2 / X / X1 / R / Z1 / Z2 axes and hydraulic upper and lower tool clamping. The control unit has just been overhauled by the manufacturer, and the machine works flawlessly. Lodpfswqhw Esx Al Tehl

Year of construction: 2001, condition: good (used), Paris/CATECH side board edger. Year of production 2001 Capacity: about 30 boards/min. In 2021 the machine underwent a major modernization, including replacement of servo valves, new control and measurement by MADREW. A new plank measuring system was rebuilt based on existing measuring sensors. The machine was dismantled in March 2024 due to replacement with a new more efficient edger manufactured by MADREW The range includes: board separator, measuring feeder, edger, distribution conveyor, electrical and control cabinets, hydraulic power unit. Lhodertn Nzopfx Al Tsl

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Lodpfx Alszy Hrko Tshl Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg.

Condition: repair required (used), Year of construction: 1987, functionality: unexamined, Due to warehouse clearance and inventory reduction, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press / Chip press Manufacturer: RSN Type: ECO Motor power: 5.5 kW Briquet diameter: approx. 60 mm Year of manufacture: 1987 Dimensions: approx. 235 cm x 130 cm x 113 cm The machine has been stored in my warehouse for some time. It was once taken in as part of a trade-in, but there was never enough time to assemble and inspect the machine. Sale is exclusively as a defective parts machine or for refurbishment by hobbyists. Any defects cannot be ruled out. Visually, the machine appears to be complete. No parts are missing. Lhjdpfxoz Efvce Al Tol (See pictures. A prior inspection is highly recommended; simply leave your phone number via email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading and packaging can be arranged by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options, so please inquire. The stated selling price is the net price plus VAT. An invoice with VAT breakdown will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty period is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty period is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty period is 12 months.

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Lhsdexv A N Rspfx Al Tsl Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: used, Year of construction: 2010, fuel type: electric, Lifting capacity: 200 kg Lhjdpjzfk Sxjfx Al Tjl Please contact Gebrauchtgeräte Center for more information

Condition: used, Year of construction: 1998, functionality: unexamined, machine/vehicle number: 969.260, Desma rubber press, 2600 kN, rubber injection machine Manufacturer: Klöckner Desma Elastomertechnik GmbH (Germany) Model / Type: 969.260 Year of manufacture: 1998 EUROMAP size: 2600/1700 Performance and technical characteristics: Lhedpfxsz Ahgue Al Tsl Clamping force: 2600 kN (approx. 260 tons) Injection volume (stroke volume): 800 cm³ Injection pressure: 2200 bar Machine mass: 8.1 tons Electrical and power supply specifications: Voltage: 3x400 V / 50 Hz Main fuse: 100 A Total current consumption: 81.8 A Motor consumption: 38.2 A Heating power: 43.6 A Compressed air required: 6–8 bar Cooling water required: 1.0 m³/h (at max. 20°C) Major service done in 2017. Machine is currently dismantled and cannot be operated. Last time it was in our production, the machine was running. Machine is sold along with many spare parts.

Condition: used, Year of construction: 1989, operating hours: 8,341 h, 1989 | Atlas Copco QAS-85 | Used Generator Set | 8341 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 20 inspection points 17 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition. Caution, 1989 machine without CE marking and without sockets equipped with protection against overloads, short-circuits, or leakage currents. Plan connection on the busbar set. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41430 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Lhedpfsz Ebuujx Al Tol 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2006, Bongard Major Manu Baguette Moulder - used - year of manufacture 2006 - production machine - technically sound Lhsdpfxszqnydj Al Tol - voltage 400 V - motor power 0.55 kW - collection from warehouse / shipping option available - price on request