Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar weight of the machine ca. 650 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System BOSCH REXROTH - BFA 980-50Hz /S/20/8 - very good condition - universally applicable - can be controlled via contactors - incl. paper band filter Dsbswhzmno Exyzlsut - Number of pumps: 2 - Pump performance: 1.7 kW, 2.3 HP, 2,890 rpm, 60 l/min 3.0 kW, 4.0 HP, 2,930 rpm, 40 l/min

Condition: good (used), Year of construction: 1986, Functionality: fully functional, cutting diameter 420 mm saw band length 6300 mm cutting width 420 mm capacity 90 degrees: square 420 x 420 mm cutting speed 20 - 130 m/min dimensions of saw-band 6300 x 38 x 1,3 mm sawing motor 4,0 kW Dimensions (LxWxH) 2420 x 3050 x 2150 mm total power requirement 6,5 kW weight of the machine ca. 2,9 t Additional information Used fully automatic band sawing machine Smallest cut-off length 6 mm Automatic feed length single 600 mm Feed length multiple 5400 mm Minimum offcut length single cut 75 mm Automatic operation 115 mm * Hydraulic saw blade tensioning * Infinitely variable cutting feed * Hydraulic material feed * Automatic feed with horizontal vice, hydraulic material clamping, infinitely variable * Coolant device * Chip conveyor Duobowhu E Rj Exyzlot * Roller-type conveyor, approx. 2500 x 500 mm

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Equipment: BIHLER P-CNC 400 Control system BIHLER Aucoustic cabine Equipment front side: 1 slide feeding system right hand side 2 eccentricpresses 90 kN /each 2 wide slide units Dujb Exyzovgfn Islst Equipment rear side: 1 cross feed system 1 RAZIOL band oiling system working range: wire diameter range: up to 4,0 mm stripmetal width: up to 60 mm stripmetal thickness: up to 4,0 mm feeding length: up to 120 mm outout: 5 - 350/min

Condition: used, Year of construction: 2014, x-axis 267,5 mm z-axis 600 mm control Heidenhain spindle tunring speed 4.000 U/min spindle passage 65 mm spindle bore 87 mm number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as Dusb Exsvy Ipzoyzlet prior sale!

Condition: good (used), vacuum furnace, chamber furnace Duobsif Sbie Exyzlet -Vacuum furnace: with vacuum pump -Chamber size: D500/W400/H400 mm -Thermostat: up to max. 320°C -Vacuum pump: power 1.1 kW -Total dimensions: 890/800/H1785 mm -Weight: 180 kg -Control: Two-point control using program control

Condition: used, Year of construction: 2000, turning diameter 450 mm turning length 1500 mm Dob Eev Sk Aboxyzleut control Siemens 840 C weight of the machine ca. 8,4 t

Condition: used, Year of construction: 2019, liter capacity 980 l Pressure of pump 8 / 20 bar Deb Eewhzmhjxyzljut weight of the machine ca. 560 kg dimensions of the machine ca. 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, Technical details: max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information: The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, Dujb Exyzswhuzxjlst straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: used, Year of construction: 2015, machine/vehicle number: 0201-230038, Ficep 1201 DE Excalibur drilling machine for flat steel and profile processing with longitudinally movable drilling unit. The drilling machine has a CNC-controlled drilling unit that moves in the longitudinal direction, X-axis, adjustment 0 - 15,000 mm, an automatic tool changing system with HSK A80 holder for 6 tool positions. The 19 kW drill spindle drive makes the drilling machine suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on the workpieces. Horizontal drilling head with one drilling spindle Dusb Eetqcraexyzlot Additional stroke of the drilling head in X-axis direction Clamping device for material clamping Device for position detection Profile size - max.: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 700 mm z-travel 500 mm A-axis 240 (-120/+120) ° C-Axis 360 ° control Siemens 840 D faceplate diameter 440 mm T-slot - width 14 mm T-slot - distance 75 mm max. table load 400 kg max. turning speeds 20.000 min/-1 tool taper HSK 63 A workpiece length 330 mm Dobjvdt Rxo Exyzljut tool diameter 125 mm change-time chip to chip 4,5 sec weight of the machine ca. 10,5 t dimensions of the machine ca. 2,5 x 5,2 x 3,5 m

Condition: used, Year of construction: 1986, serial number 7175455 3 Backenfutter Durchm. 30 tool taper ja turret head für 6-fach-Belegung Dusb Eowhq Dpoxyzlot centre distance ca. 700 mm turning diameter max. ca. 450 mm Control FANUC dimensions of the machine ca. 3.000 x 2.000 x 2.200 mm

Condition: used, Year of construction: 2007, turning diameter 130 mm turning length 280 mm control Siemens Sinumerik 840D weight of the machine ca. 4 t Dsbjv Skz Rs Exyzlsut

Condition: excellent (used), Year of construction: 2008, Cleaning system for all MORI SEIKI machines Discharge height above floor: 535 mm Maximum filter capacity: 160 l/min Filter mesh: 25 µm Dob Exewhychsyzleut

Year of construction: 2008, operating hours: 19,280 h, Condition: used, machine/vehicle number: 5700A1, (internal no.: 181) consisting of: take-up unit, number of spools: 1, horizontal axis, stranding pitch: 4-25 mm, adjustable, traversing mechanism: UHING system, bow speed: max. 2,000 rpm, torsion: max. 4,000 rpm, external pre-strander, speed: max. 4,000 rpm, rotating cover strand pay-off unit, number of spool positions: 12, spool axis: vertical, mechanical band brake with dancer arm, rotating heart strand pay-off, number of spools: 1, mechanical band brake with dancer arm, control cabinet, SEI VT310W control system, Siemens S7, installation length: approx. 17 m, pay-off wire/strand diameter: 0.13 - 0.4 mm, heart diameter: 0.4 - 0.5 mm, max. rope diameter: 2.5 mm, tensile strength: 1960 - 2750 N/mm², total weight: approx. 13,350 kg (The stranding head was replaced in 2012 from DTAF500 to DTAR400) Dujb Exowh Tyajyzlot

Condition: used, Year of construction: 2000, Number of axles 4 St. 2 tool change unit 20 Plätze spindle turning speed range 20.000 U/min control Siemens 840 D tool taper HSK 63 weight 6670 kg 143-68 Dueb Exowhq Disyzlst

Year of construction: 2010, operating hours: 10,304 h, Condition: used, (internal no.: 182) consisting of: Processing material: stainless steel or galvanized steel wire, Pay-off wire dimensions: 0.08 - 0.25 mm, Strand diameter: 0.24 - 1.0 mm, Tensile strength: 1,500 - 3,000 N/mm², Stranding length: 1.2 - 10 mm, Strand/rope construction: 1x7, Operating direction: right to left, Mechanical dancer arm, Wire break detectors, Oil spray system, Pre-twisting unit, Two pulleys in 8" arrangement, Speed continuously adjustable, Overrun unit, Number of spools: 1, Spool axis vertical, Extension mechanism: cross-threaded double screw, Laying lay length: fixed, 3.97 mm, Torsions: 6,400 tpm, External pre-twister, Speed: 6,400 rpm, Wire lubrication: MICRO spray system with compressed air, drain unit, number of coil positions: 7, coil axis horizontal, main control panel, main cabinet, control SEI VT310W, installation length: approx. 640 cm Dujbjwh Tx Ns Exyzljt

Condition: used, Year of construction: 1968, faceplate diameter 1000 mm Djb Exyzowhqzzoljut turning diameter over slide rest 1200 mm centre distance 1500 mm bed indentation . weight of the machine ca. 6 t

Condition: used, Year of construction: 1921, length 620 mm width 130 mm height 300 mm weight 88 kg Antik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Deb Exyzjwhqzhslout +++++

Condition: used, Year of construction: 1987, 300 - 1400 weight 5 t Dsb Eowhqzboxyzljut cooling ja

Condition: used, Year of construction: 2018, diameter max. . mm diameter min. . mm cutting lenght max. . mm +++++ Djb Eswhqy Dexyzleut Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2000, control FIDIA PCN 775 . x-travel 1000 mm y-travel 620 mm z-travel 700 mm Duebowhqywj Exyzljt Axis 5 Achsen simultan gesteuert weight 12 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1999, x-travel 4500 mm Dusbewhqyqo Exyzlot y-travel 2000 mm z-travel 1200 mm spindle taper ISO 50 Cube 2 weight of the machine ca. 20.000 t

Condition: used, Year of construction: 1999, 264 Dsbewhq D Ae Exyzljut working width 3200 mm sheet thickness - max. 6 mm output 10,5 kw weight of the machine ca. 6580 KG

Condition: used, Year of construction: 2000, . max. swing diameter 460 mm hollow 66 mm digital . multifix . Deb Exowhqzueyzleut centre distance 1000 mm feed: . weight of the machine ca. 1,8 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1988, table width 70 mm ja weight of the machine ca. 115 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. Duob Exjwhqznjyzlst +++++