Condition: used, Functionality: fully functional, Automatic Lathe Cjbvculewf Ez Djnjgt

Condition: used, Year of construction: 1998, turning diameter over bed 0400 mm turning diameter over slide rest 260 mm turning length 1000 mm centre height 200 mm centre distance 1000 mm spindle bore 50,8 mm speeds 20- 3150 U/min Cgsbvculev Ank Denjt feeds longitudinal slide 0,01 - 3,24 mm/U feeds cross slide 0,005- 1,62 mm/U weight of the machine ca. 1,8 t dimensions of the machine ca. 2,85 x 1,4 x 1,9 m voltage 400 V main drive 5,8 KVA With chuck, Multifix toolholder and digital readout.

Condition: used, Year of construction: 2005, Functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 565 mm, turning diameter: 560 mm, spindle speed (min.): 25 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 79 mm, feed rate Y-axis: 80 m/min, chuck outer diameter: 68 mm, overall weight: 7,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Y-AXIS LIVE TOOLS CNC HEIDENHAIN Csbvculer I Abxenegt Max turning length 600 mm Max turning diameter 560 mm Max turning diameter (over the slide) 565 mm Max turning diameter (over the bed) 680 mm Number of live tools 12 pcs. Max speed of live tools 4500 rpm. Feed rate on Y axis 80 mm (+40/-40 mm) Distance between axes 635 mm Max spindle diameter 250 mm Spindle speed range 25-5000rpm. Max power of the spindle 35 kW Max torque of the spindle 370 Nm Max spindle diameter 68 mm Spindle bore 79 mm Machine dimensions approx. (LxWxH) 3500x2350x3500 mm Machine weight approx. 7000 kgs EQUIPPED WITH: -Chip conveyor -Y axis -Rest -Tailstock USED MACHINE

Condition: good (used), Chuck flange, flange holder, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate -Chuck flange: for three-jaw chuck, four-jaw chuck, faceplate -Outside: Ø 250 mm -Bolt circle: Ø133 mm -Hole: short cone 6, cone Ø 103 - 105 mm -Dimensions total Ø 250 x 80 mm -Weight: 6.6 kg Cobvcujv Sy Awjlnsgt

Condition: ready for operation (used), Year of construction: 2003, MAZAK INTEGREX 200 III-ST milling turning center CN: Mazatrol 640 MT PRO Year 2003 Hours: 87,613h Max diameter: 660 Races: X 580mm X2 150mm Z 1.045mm Z2 1.010mm Y +/- 80mm W 1050mm main spindle: power: 22kw max rotation: 5000 rpm Chuck: Kitagawa BB208 (210mm) bar passage: 65 mm secondary spindle: power: 18.5kW maximum rotation: 5000 rpm Chuck: Kitagawa BB-208 (210mm) bar passage: 65 mm Milling spindle: Power: 18.5kW Maximum rotation: 12000 rpm Tool magazine capacities: 40 x km63 (120 tools km63 with the machine) Lower tower: 9 tools Chip conveyor Mayfran consep B-axis tilt for turning tools flash tools HOB 5 simultaneous axes C axis on main spindle and secondary spindle Bar feeder interface Cobvculok D Ez Ionjgt New spindle, replaced by MAZAK on 06/2022 Machine visible in operation in France (loan to the Belgian border)

Condition: excellent (used), Swing over bed 410 mm Distance between centers 1'000 mm Spindle speeds 4-3'000 rpm Control: WEILER Misc. accessories MARCELS MASCHINEN CH Cgsbok D S Rqsvculnet

Condition: used, CNC Lathe - twin turret - subspindle Y axis NAKAMURA WT 250 CNC Fanuc, Series 16i-T Spindle - sub spindle 1 turret live tools + Y axis 1 turret live tools (lower) 2x C-Axis Swarf conveyor Cgsbewaa Dijvculnet IEMCA TS560P Bar loader Under power in our in our warehouse in Gussago BS. Mimu machine tools Italy

Condition: excellent (used), Year of construction: 2006, operating hours: 8,768 h, Functionality: fully functional, machine/vehicle number: 8042942142, turning diameter: 350 mm, spindle speed (min.): 5 rpm, spindle speed (max.): 5,000 rpm, total height: 2,100 mm, total length: 4,000 mm, chuck outer diameter: 210 mm, total width: 2,000 mm, collet bore: 50 mm, overall weight: 4,000 kg, Machine in perfect technical condition. Lots of tool holders and lathe jaws. The machine has been in storage for the last year. Cjbvculswd Nf Djnegt The machine is powered, can be tested on site

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, turning height: 2,200 mm, workpiece weight (max.): 20,000 kg, turning diameter over cross slide: 2,000 mm, turning diameter: 2,600 mm, rotational speed (max.): 250 rpm, spindle speed (max.): 3,000 rpm, table load: 20,000 kg, table diameter: 2,000 mm, Equipment: rotational speed infinitely variable, TOS SKIQ 20 CNC Vertical Borer. 2009. CNC Vertical Borer with Live Tools Drilling and Milling Siemens Sinumerik 840D, ATC 15. With Tools and Renishaw Workpiece Measuring. Table diameter 2.000 mm Max. Swing up to a height of 580 mm 2.600 mm Max. Swing 2.300 mm Turning Heigth 2.200 mm Table speeds, stepless 2,5-250 rpm Csbvcewc R Uwoulnegt Table load capacity 20.000 kg Table motor 80 kW Ram 180 x 200 mm, stroke 1.000 mm Live spindle speed 4 - 3.000 rpm Live spindle motor 28 kW

Condition: excellent (used), Year of construction: 2014, operating hours: 10,600 h, Functionality: fully functional, turning length: 3,000 mm, turning diameter: 670 mm, This second hand INTEGREX model "e-420 H-S II"i s a Multi-Tasking Machining Center and a complete fusion of CNC turning center and machining center, forming one of the best and most advanced multi tasking machine in the industry. Complete all operations in a single setup – turning, milling, boring, drilling, part transfer from spindle 1 to spindle 2 and more with Mazak's Done-In-One capability. The machine delivers precision and performance for heavy, large-diameter, shaft-type workpieces within a wide range of industry applications. This machine was barely used in a company that recently filed for bankruptcy in 2024. The former owner from Poland was active in the general machining as third party contract manufacturer. The entire factory will shut down within the next few months. The company had just been purchased in 2025 by an investor who will delete the entire manufacturing operation and transform the building for new purposes. General Discription Milling spindle travel -30 ~ 210 degrees (.0001 degree min index angle) Available 2.5k 40HP 5.2” spindle Bore (option) Identical second spindle for Done-In-One part processing Full C-axis contouring (.0001 degree minimum index) Available 80 or 120 automatic tool changer options available Cgobvcjv H Rtceulnst Machine Specifications CNC control: Mazatrol Matrix 2 Distance between centers: 3000 mm Max turning diameter: 670 mm Max machined length: 3000 mm Max workpiece weight: 880 kg Max chuck speed: 2500 rpm Automatic tool changer: 40 tools Spindle motor power: 22 kW Motor power of the milling unit: 15-22 kW Milling spindle: 12000 rpm Indexation: 0.0001° X/Y/Z axis travel path: 845 / 420 / 3013 mm Rapid traverse in X/Y/Z axis: 50 / 50 / 40 m/min High-pressure cooling through the center of the tool: 70 bar Operating hours: 10600 h

Condition: new, turning diameter 330 mm turning length 830 mm swing diameter over bed slide 196 mm Swingdiameter in the bed bridge 170 centre height 165 mm centre distance 830 mm Turning length in the bed bridge 430 reus 16 (70-2000) U/min tail stock MK 3 quill stroke 110 mm diameter of quill 32 mm spindle taper DIN ISO 702-2 Nr. 4 spindle bore 38 mm spindle cone MK 5 feed längs 32 / 0,052 1,392 m/min feed plan 3,2 / 0,014 0,38 m/min weight of the machine ca. 0,52 t dimensions of the machine ca. 1,7 x 0,75 x 1,6 m Fully equipped leading and tension spindle lathes. TH 3309D with digital position indicator DPA 21/3402040 - Hardened and ground Z-axis guideway - Spindle mount Camlock DIN ISO 702-2 No. 4 - Precisely crafted slide - Handwheels with adjustable fine scale 0.04 / 0.02 mm - Quadruple steel holder - All guides can be adjusted using V-ledges - Main spindle running in an oil bath - Gear wheels run smoothly, hardened and ground - Upper slide adjustment range ± 90 ° - Guaranteed concentricity of the spindle nose better than 0.015 mm - Handwheels decoupled and tested according to EN 23125 - Safety handwheels with push-out function in the X and Z axes - Two-channel right-left switch tested according to EN 23125 - DC 24 volt electrical system with two-channel safety circuit according to EN 23125 - Lathe chuck protection tested according to EN 23125 - Switch with life cycle calculation, tested according to EN ISO 13849 - Lockable main switch - Clockwise / counterclockwise rotation on the bed slide switchable - Lead screw cover - Tailstock for taper turning adjustable ± 10 mm Cobvcjk Egrwoulnsgt - Tailstock quill and handwheel with adjustable fine scale 0.02 mm - Quick, easy and tool-free adjustment using a clamping lever - Heavily ribbed prism bed, inductively hardened and precision ground - Machine base with tool compartment on the right-hand side (left-hand side with 3 Bezels (no compartments) - Pull-out chip tray with guide rails - Emergency stop device with foot actuation - LED machine lamp integrated in the chip guard Digital position indicator DPA 21 - User-friendly membrane keyboard, splash-proof, closed and glare-free - glass rulers scope of delivery - Fixed steady rest passage Ø 6 - Ø 50 mm - Moving steady rest passage Ø 8 - Ø 30 mm - LED machine light - Reduction sleeve MK 5 / MK 3 - Two fixed centering points MK 3 - Quadruple steel holder 16 mm - Change gears set - machine base - Initial machine filling with quality oil - operating tool Including special accessories OPTIMUM three-jaw lathe chuck, centric clamping Ø 200 mm Camlock DIN ISO 702-2 No. 4/3442762

Condition: ready for operation (used), Year of construction: 2024, General Data Measurements width 1620 mm Measurements depth 2795 mm Measurements height 1650 mm Machine weight 3500 kg Control Unit Brand Fanuc Model i Series Main Drive Cgjbvcst Iykvsulnot Number of spindles 1 Spindle speed range 4000 rpm Spindle motor power 18.5 / 15 kW Tool taper MT#4 Number of axis 2 Movement X-Axis Movement 175 mm X-Axis Rapid Traverse 30 m/min Y-Axis Movement 550 mm Y-Axis Rapid Traverse 36 m/min Workpiece Workpiece drm over bed 510 mm Workpiece drm over support 290 mm Tools Number of station 12 This DOOSAN Lynx 235II lathe was manufactured in 2024. It features a maximum turning diameter of 320 mm and a length of 525 mm, with a bar working diameter of 65 mm. The spindle supports a maximum speed of 4,000 rpm, ensuring efficient machining. Equipped with a 12-station turret and rapid traverses of 30 m/min (X-axis) and 36 m/min (Z-axis), this machine manufactured by DN Solutions (formerly DOOSAN MACHINE TOOLS), offers robust performance for precise operations. For more information about this lathe, please reach out to us. Application Types Turning

Condition: used, _____ Description: Year of manuf. : 2022 Control : Fanuc 0i-TF Plus Turning diam. : 360 mm Turning length : 490 mm Mainspindle: Technology:Belt-driven spindle Speed:4.500 rpm Power (max.):18,5 kW Torque (max.):313 Nm Bar capacity:68 mm Workpiececlamping:Colletchuck Cgsbvculsv Uurxjnjt Subspindle: Technology:Motorspindle Speed:6.000 rpm Power (max.):7,5 kW Torque (max.):51 Nm Workpiececlamping:Collet chuck, Hainbuch Spanntop mini Axfix Gr. 65 Movement in B:580 mm Rapid travers in B:24 m/min Toolcarrier I (X/Y/Z): Technology:Turret with 12 stations Taper:BMT65 Tooldive:5.000 rpm, 5,5 kW, 37,5 Nm Movement in X/Y/Z:235/100/580 mm Rapid travers in X/Y/Z:18/12/24 m/min Equipment/Accessory: Chipmanagement:Chip conveyor Coolingmanagement:Internal coolant pump with Oilskimmer and Highpressure, 10 bar Toolmeasurement:Automatic Measuringarm Rawmaterialfeed:Barloader, Top Automazioni XFiles-S 365M Finsihedpartremoval:Part catcher with collecting boc Toolholder:Misc. static and driven toolholder Further Equipment:Trafo, Rinsing pistol

Condition: used, Year of construction: 2011, turning diameter 42 mm turning length 100 mm control Mitsubishi M70 turning speed range - main spindle 4.000 min/-1 drive capacity - main spindle 7,5 kW x-axis 180 mm y-axis 330 mm z-axis 300 mm 0,1 ° In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Cgsbvev Td Itsculnet Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, turning diameter: 65 mm, The machine is new and in stock. STANDARD EQUIPMENT Main spindle 15 kW, 3,500 rpm Cebvcujv N I Hxjlnsgt with SINUMERIK 840D control system with 4 cross-slides on the main spindle with an 8-station VDI30x55 servo turret all stations suitable for red machining. Tool holder Central milling drive 3.3 kW, 3000 rpm Including stable polygon turning function (without tool holder) With full C-axis on the left spindle and on the pick-up spindle Including pick-up spindle With workpiece collecting tray and finished part conveyor belt for falling cut-off parts or offcuts With retractable finished part conveyor belt for unloading finished parts after back machining 4 tool holders for the back With programmable high-pressure coolant for clamping device cleaning before the next workpiece transfer With HD-KM pumps, 70 bar With separate coolant tank (180 liters) With handwheel Coolant and hydraulic pumps Bar loader interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring on all stations Control cabinet with air conditioning unit Triple signal lights The machine is also equipped with a turret Equipped for back machining. This is designed for fixed tools only. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming document for Lico machines Color Door RAL 7015 Slate Gray Chip tray/frame RAL 7024 Graphite Gray Housing RAL 7035 Light Gray

Condition: excellent (used), Year of construction: 2021, Vertical Single-Spindle Turning Center Manufacturer: EMAG Type: VL 400 (Siemens) Year of Manufacture: 2021 Operating Hours: Approx. 1,848 Turret Base Unit and Y-Axis Slide Unit HP Turret Drive Unit for Driven Tools (C442) with Internal Coolant Supply Max. Speed: 6,000 rpm Crosscut Speed: 3,200 rpm Tool Carrier Unit for Driven Tools: 12 x BMT75 Circular Workpiece Transport System, O-Design Drag Frame System for 10 Workpieces Workpiece Height (including workpiece pallet): Max. 300 mm Workpiece Weight: Max. 60 kg Set (10 pcs.) Drag Frames for O-Band For Workpiece Diameters: 150 - 400 mm Blow-Off of the Workpiece and Clamping Device (Pick-up) Coolant supply: 15 bar Coolant pump, flow rate approx. 80 l/min at 15 bar. Cooling unit (6.5 kW, water-air) A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are maintained at ambient temperature (10°C - 40°C). Coolant double filter, manually switchable Filter mesh 100 μm, with electrical and mechanical contamination indicator Chip conveyor Hinged belt design: to the rear Chip discharge height 1,100 mm. (with integrated coolant reservoir, capacity approx. 500 l) Emulsion mist extraction: Extraction capacity approx. 800 m3/h Flushing gun Workpiece measurement with measuring probe Blow-off measuring probe Tool life monitoring (sister tool management) Tool breakage monitoring TOOLINSPECT MCU-EUROPA (SIEMENS 840Dsl, FANUC 31i/32i) 3-color indicator light Axial drilling and milling head - BMT75 CC 5x 90° angle drilling and milling heads - BMT75 CC (i=1:1) Tool set for OP10 + OP20 Hydraulic full clamping cylinder size 150 - with 1 media feed-through Max. tensile force 10,850 daN at 70 bar Coolant through the spindle Programmable Clamping pressure adjustment 3-jaw power chuck KNCS-N 500-155 quick-change max. = 2,200 rpm (standard speed according to DIN 6386) Set of hard base jaws Set of soft top jaws Attachments for KNCS-N 500-155 Flushing nozzle in chuck bore Additional tool holders with tools: 1x 8.BMT25VL8IKX50 external finishing tool 1x 8.BMT25VL8IKX50 external roughing tool 1x 60.7516VL8IKDI15 engraving tool 1x 60.7516VL8IKDI15 tapping chuck 1x 40.75V5KRVL8IKD 50mm cutter head 3x 80.75V5VL8IKD boring bar holders 2x 27.V520HYDL26 Drill Bit, 20 mm Diameter Cebvcovq Iwyoulnogt 1 x 42.V522L08Ik Drill Bit, 22 mm Diameter 1 x 27.V514WNL31 Drill Bit, 14 mm Diameter Software Package Operating Instructions / Maintenance Manual 170425

Condition: good (used), Year of construction: 1999, 6 spindles Thread cutting Slotting tool Cgsbvcev Tcyuoulnot Skiving tool holder Pick-up device Many accessories with IEMCA PRA 40/31 P bar loader (3m bars)

Condition: used, Year of construction: 2017, machine/vehicle number: XD-38II-CN-0491-N, Special feature: The machine is equipped with a hydraulic 3-jaw chuck on both the main and pick-up spindles. The machine can be inspected at our premises. MAIN SPINDLE Maximum turning diameter: 25 mm Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) C-axis with 0.001° Stroke Z1 [mm]: Long lathe version 142 mm, Short lathe version 80 mm Synchronous guide bush unit Type of guide bush: SL38 Type of collet chuck: 173E COUNTER SPINDLE Maximum speed [rpm]: 6,500 Maximum power [kW]: 23 (76 Nm) Maximum pick-up diameter [mm]: 25 Max. part length ejection to the front [mm]: 90 C-axis with 0.001° stroke Z2 [mm]: 280 Type of collet chuck: 171E / 173 E TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 16 x 16 mm Cross drilling/milling device: - Quantity: 5 driven ER16 drilling/milling spindles - Power: [kW]: 2.1 (S6000) - Front drilling unit for 5 drilling quills diameter 32 mm Rear machining - Tool carrier for 4 (optionally 6) tools - 2 - 4 driven drilling/milling spindles ER16 modular - 2 - 4 stationary drilling/milling spindles ER16 modular Cebvcuorvzdmjlnegt Optional Y2 axis - 4 - 5 driven drilling/milling spindles ER16 modular - 3 - 4 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 6 Number of spindle axes: 2 Rapid traverse m/min: 32 m/min (Z1,Z2,Y,X2, Y2) ; 24 m/min (X1) Connected load [kW]: 35 CONTROL Control type: Siemens 828 D SL Number of axes: 6 (X1, Z1, Y1, X2, Z2, Y2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation Absolute reference point Self-diagnosis function ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set LED work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English

Condition: new, Year of construction: 2023, Functionality: fully functional, turning diameter: 65 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 3.500 rpm with SINUMERIK 840D control system with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for Cgebvsug Uqgeculnst finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray

Condition: new, Year of construction: 2023, A machine directly from the Hanwha dealer HB TURNKEY (Hanwha Germany): Hanwha CNC Swiss type lathe XD10 with Fanuc control of the 0i series ( Comparable with Star SR-10J ). MAIN SPINDLE -Maximum turning diameter: 10mm max. spindle bore diameter: 10mm maximum speed [rpm]: 15.000 Maximum power [kW]: 3,7 BUILT-IN MOTOR C-axis with 0,001 stroke Z1 [mm]: 155 Synchronous guide bush unit Guide bush type: SD125 R Collet type: 1212 E COUNTERSPINDLE Cjbvcsgq Ravsulnsgt Maximum speed [rpm]: 10.000 Maximum power [kW]: 1,1 C-axis with 0,001 maximum tapping diameter [mm]: 10 max. part length ejection to the front: stroke Z2 [mm]: 180 type of collet: 1212E TOOLING OPTIONS Tool slide X1,Y1: Tool holder plate for 5 external turning tools 8x8mm Cross drilling/milling equipment: - Quantity: 4 driven drilling/milling spindles, ER11 - Power: [kW]: 0,55, S6000 - Front drilling attachment for 4 drilling spindles - ER11 BACKWORKING - tool carrier for 4 tools - 2 driven drilling/milling spindles ER11 modular - 2 fixed drilling/milling spindles ER11 modular TRAVERSING AXES AND CONNECTION CAPACITY Number of servo axes: 6 Number of spindle axes: 2 rapid traverse m/min: 32m/min (Z1,Z2,Y,X2) ; 24m/min (X1) Connected load [kW]: 12KVA CONTROL Control type: Hanwha Fanuc 0iTF series Number of axes: 6 (X1, Z1, Y1, Y2, X2, Z2,X2) Simultaneous 4-axis control External control panel with handwheel 9.5" color monitor LCD/MDI Automatic switch-off function PowerOff Progra

Condition: good (used), Year of construction: 2019, machine/vehicle number: XD-38II-CP-0703-H, turning diameter over cross slide: 38 mm, spindle speed (max.): 6,500 rpm, turning diameter: 38 mm, spindle bore: 39 mm, power: 7.5 kW (10.20 HP), The machine can be viewed at our Immendingen site after consultation. Cebvculevtmaljnjgt Included is the original chip conveyor and a bar loading magazine from FMB 3-36 turbo Includes Büchele SFB-301 high-pressure system 150 bar 4 valves

Condition: as good as new (ex-display), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: XE-20-DX-0683-NH, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1 rpm, turning diameter: 20 mm, spindle bore: 25 mm, bar passage: 20 mm, feed length X-axis: 70 mm, feed length Z-axis: 160 mm, power: 3.7 kW (5.03 HP), A machine directly from the authorized Hanwha dealer HB TURNKEY (Hanwha Germany): MAIN SPINDLE Maximum turning diameter: 20 mm Max. spindle bore diameter: 25 mm Maximum speed [rpm]: 10,000 Maximum power [kW]: 3.7 C-axis with 0.001° Stroke X1 [mm]: 70 Stroke Z1 [mm]: 160 (long turning mode) Stroke Z1 [mm]: 50 (short turning mode) Synchronous guide bush unit Guide bush type: 22.001 / T223 Type of collet chuck: 145E / F25 COUNTER SPINDLE Maximum speed [rpm]: 8,000 Maximum power [kW]: 2.2 Maximum pick-up diameter [mm]: 20 max. part length ejection to the front [mm]: 70 C-axis with 0.001° Stroke X2: [mm]: 315 Stroke Z2 [mm]: 215 Type of collet chuck: 145E / F25 TOOLING OPTIONS Tool slide X1,Y1: - Tool holder plate for 5 external turning tools 12 x 12 mm Csbvegmnq Hsculnegt Cross drilling/milling device: - Quantity: 4 driven drilling/milling spindles ER16 modular - Speed S6000 - Front drilling unit for 5 drilling quills diameter 25 mm Rear machining - Tool carrier for 5 tools - 2 driven drilling/milling spindles ER16 modular - 2 stationary drilling/milling spindles ER16 modular TRAVERSING AXES AND CONNECTED LOAD Number of servo axes: 5 Number of spindle axes: 2 Rapid traverse speeds m/min: 32m/min (Z1,Z2,Y,X2) ; 24 m/min (X1) Connected load [KVA]: 15 CONTROL Control type: Fanuc Hanwha 0i-TF series Number of axes: 5 (X1, Z1, Y1, X2, Z2) Simultaneous 4-axis control External control panel with handwheel 10.4" color monitor LCD/MDI Automatic switch-off function PowerOff Program check function (test run possible via handwheel) Continuous thread cutting cycle Runtime display / parts counter CF card interface Tool radius compensation ACCESSORIES Alignment shoes with leveling elements Tool box and service tool set Work area light Signal lamp (3-color) Safety door switch with interlock Maintenance and central lubrication unit (1.8 liter lubricating oil volume) Coolant flow monitoring Pneumatic blow-out device for the pick-up spindle gripper Manual and documentation in German and English (Maintenance and operating instructions incl. parameter list and test report) Chip tray with 170 l capacity (not applicable with chip conveyor option) ( comparable with Citizen A20 , Star SB-20R ) - READY FOR IMMEDIATE USE - We will be happy to calculate and optimize the cycle time for you and set up your newly purchased machine at our premises. WE WILL FIND A SOLUTION - Whether standard or HB-modified

Condition: good (used), Year of construction: 2016, The machine can be inspected at our premises in Immendingen after consultation. Included is the original chip conveyor and a bar feeder from FMB 2-20 turbo Incl. Kraft and Bauer fire extinguishing system Cgobvculsu Rmy Renjt

Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, machine/vehicle number: XV-26II-DW-0107-NH, spindle speed (max.): 8,000 rpm, turning diameter: 26 mm, overall weight: 2,900 kg, power: 3.7 kW (5.03 HP), The machine is on display in our exhibition and can be viewed upon request. Cebjvt Dg Aevculnjgt Incl. FMB 3-36 turbo loading magazine Incl. Büchele SFB-301 high pressure system 100 bar 4 valves

Condition: new, Year of construction: 2024, Functionality: fully functional, turning diameter: 51 mm, The machine is a new storage machine. STANDARD EQUIPMENT main spindle 15KW, 4.000 rpm with Mitsubishi M830 control with 4 cross slides on the main spindle with an 8-fold servo turret VDI30x55 all stations can be used for red. WZG central milling drive 3.3 KW, 3000 rpm incl. stable polygon turning function (without tool holder) with full C-axis on the left spindle and on the pick-up spindle with 48-position spindle lock for support during routing Including pick-up spindle with workpiece collecting tray and finished part conveyor belt for falling cut-off parts or remnants With swiveling finished part conveyor belt for finished part unloading after rear side processing 4 tool holders for rear side with programmable KM high pressure for clamping device cleaning before the next workpiece transfer with HD-KM pumps, 70 bar Cgjbveug Up Nsculnjt with separate coolant tank (180 liters) with handwheel Coolant and hydraulic pumps Bar feeder interface Interface for Lico chip conveyor 1 set of slide base holders Automatic lubrication system Cutting force monitoring at all stations Control cabinet with air conditioning unit 3-fold signal lamp The machine is also equipped with a turret for back machining. This is only designed for fixed tools. BASIC MACHINE EQUIPMENT LICO / FMB bar loader interface Programming pad for Lico machines Color Door RAL 7015 slate gray Chip tray/frame RAL 7024 graphite gray Housing RAL 7035 light gray