Condition: used, Year of construction: 2008, Cutting length: 3.200 mm Width of lifting table: 2.200 mm Feedrate max: 150 m/min HOLZMA Speed Concept: Yes Continuously variable feed: Yes Panel thickness min: 6 mm Saw blade projection: 130 mm Saw blade diameter max: 480 mm Main motor power: 18 kW Scoring saw: adjusted by camera Jump scoring: Yes HOLZMA VVSH - Soft-/ postforming: Yes Labelling: manually Automatic panel storage & retrieval system: Yes Febju Trrno Ep Iiasgb Stack storage: Yes Lift table: loading from behind, lateral loading For sensible workpieces: Yes Stop side: Right side HOLZMA | HOMAG Machine table with air nozzles throughout: Yes HOLZMA Material-dependent parameters: Yes HOLZMA Online data transmission + USB port: Yes Control: HOLZMA CADMATIC 4.1 PROFESSIONAL Conformity marking: CE mark

Condition: excellent (used), Year of construction: 2002, Residual wood shredder / chipper Year of construction 10/ 2002 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Profile rotor with 14 round knives Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 15.0 kW CE Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg NEW CUTTING BLADES NEW ROTOR BEARINGS Fgeb Ep Iieqxbc Djaeb NEW ROTOR BLOCKS NEW SLIDER GUIDES NEW V-RIEMS NEW GEAR OIL Automatic star-delta start-up Switch cabinet with PLC control and 5 meter cable harness Automatic shutdown when hopper is empty Safety package with gearbox limit switch Vibration-damping machine feet Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: used, Year of construction: 2022, Functionality: fully functional, feed rate Y-axis: 700 m/min, Log peeler CAMBIO 45 AIR TEN. The peeler is sold after a major overhaul. Fgjb Eetcu Uajp Iiasb 4. Bark conveyor. 5. Centering conveyor. 6. Log peeler CAMBIO 75, knife system CAM TOOL. 7. Additional rollers after the peeler.

Condition: used, Milling machine for wood products, Landonio brand, model FMU 2000 Fgeb Esizlirjp Iiaob

Condition: used, Year of construction: 2000, Ott Unimatic Edge Banding Machine, Reliable and good machine. Has a pre-milling. 4 diamond cutters as a gift. It can glue not only natural or plastic edging, but also strips up to 20 mm thick. Fjb Epowh Rw Ao Iiaegb

Condition: used, Raimann Profirip KM310 multi-rip circular saw for ripping and trimming boards with multiple circular saw blades including a solid roller conveyor. Fgjb Ep Ijwctbtsiaob cutting width: 310 mm chain width: 340 mm engine: 36 kW cutting height: 75 mm saw shaft ø: 65 mm saws ø: Max. 300 mm Clearance height: 100 mm

Condition: excellent (used), Machine 2 heads, very good condition, ready to work Fgsb Epswg Tqcj Iiasb

Condition: new, Year of construction: 2024, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: Fgsb Epshbdg Us Iiajb • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 1,000 h, Functionality: fully functional, overall weight: 2,750 kg, input voltage: 400 V, input current: 32 A, Loymeyer KAM 775S IQ Edgebander Delta 4 touchscreen control Premilling Glue station End cutting Straight/Radius unit Feb Ep Iijwf U Rzsasgb Corner rounding Glue scraper Edge scraper Available end of May 2025

Condition: used, Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control CNC Weinig Powermat 500 for window production ----- The machine reconditooned and functionally checked Short summary: ----- 6 spindles with 8,000 rpm and 7.5 KW including 6 x HSK/Powerlock Window package with glazing bead removal Spindles axially and radially CNC controlled right and upper spindles with common pneumatic timing for Glazing bead removal Large Powercom control with touchscreen Detailed description: ----- Tool arrangement No. 018 for window production Technical data: ----- Working width 20 - 230 mm (with tool flight circle 93 - 125 mm) Working height 8 - 120 mm (with tool flight circle 93 - 125 mm) 1. Tool holder ----- First lower tool holder Motor with brake 7.5 KW Diameter: 40mm Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 125 - 180 mm In conjunction with PowerLock 93 - 180 mm Axial adjustment path 17 mm Table insert hardened in front of 1st lower tool holder 2. POWERLOCK/HSK tool holder ----- First right tool holder Motor with brake 7.5 KW Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Maximum throat depth 35 mm Axial adjustment path for spindle 80 mm Axial adjustment path for PowerLock 55 mm Radial adjustment path Min. tool diameter at stop level 93 mm Max. tool diameter behind stop level 200 mm Axial and radial CNC controlled 3. POWERLOCK/HSK tool holder ----- First left tool holder Motor with brake 7.5 KW Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment path for spindle 80 mm Axial adjustment path for PowerLock 55 mm Pressure shoe in front of left tool holder, including 2 side pressure rollers, spring-loaded Axial and radial CNC controlled 4. POWERLOCK/HSK tool holder ----- First upper tool holder Motor with brake 7.5 KW Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range 40 mm Axial and radial CNC controlled 5. POWERLOCK/HSK tool holder ----- Second upper tool holder Motor with brake 7.5 KW Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 93 - 200 mm Tool flight circle for straight cutter heads max. 163 mm Maximum throat depth 35 mm Axial adjustment range 40 mm Axial and radial CNC controlled Fjbjtzwd Hj Ep Iiajgb 6. POWERLOCK/HSK tool holder ----- Second lower tool holder Motor with brake 7.5 KW Speed ??8,000 rpm including high-performance ball bearings Tool flight circle 93 - 225 mm Maximum throat depth 15 mm Axial adjustment range 40 mm Radial adjustment path Min. tool diameter to the table level 93 mm Max. tool diameter 6 mm below table level 225 mm A...

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, working width: 1,100 mm, OTT RSK-0 1100 wide belt sander. Fgsb Ep Iswh Rd Ajiasb Untested condition. To be inspected.

Condition: used, Lightweight edge sander BGU Type KS 226 for precise sanding of straight and curved wood edges. The lightweight construction and powerful motor enable a consistent sanding pattern with high removal rates. Ideal for small carpentry shops, furniture construction, and interior design. sanding belt length: 2.250 mm Sanding belt width: 150 mm Fob Epswcry Uo Iiaogb table: swiveling engine power: 1,5 kW Suction nozzle: 100 mm

Condition: good (used), Year of construction: 2017, Functionality: fully functional, CNC Machining Center SCM TECH Z5 Drilling unit with 18 spindles, 12 vertical spindles, 6 horizontal spindles Groove saw 5 axis Prism motor KT HSK mounting, liquid cooled Fgsb Ep Iswbhdyoiajb Tool changer with 16 positions Laterally positioned changer with 8 positions Guebkpvowbhdyj H H Eja PC control Laser positioning cups Tool length measurement Waste conveyor belt Price collected t Commissioning 2017, First owner, very well maintained. Disassembly and loading for the buyer. Available from September 2025

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Fgob Eehq T Udsp Iiaob Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Condition: excellent (used), Year of construction: 2004, chain mortising machine with additional unit made up of two horizontal routers for the execution of the handle and the key holes and two adjustable and motorised swinging units for the execution of slots vertical working unit: max work piece thickness 230 mm max work piece height 710/ 1050 mm vertical stroke length 150 mm horizontal stroke length 300 mm traverse head stroke 80 mm head tilting +/- 45 deg. vertical stroke of head stock bracket 250 mm headstock bracket tilting +/- 45 deg. max. workpiece height 1000 mm chain motor 2,2 kW, 400V, 50 Hz horizontal working unit: swinging unit no. 2 min/ max. longitudinal stroke 80/ 130 mm manual traversal stroke 140 mm pneumatic transversal stroke 140 mm swinging unit motor 0,18 kW, 400 V, 50 Hz router motor 1,8 kW, 400V, 50 Hz weight approx. 650 kg incl. pump for automatic chain lubrication incl. tools incl. manual Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Fgeb Eslpcffjp Iiaeb • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Clean air extraction / dust extractor Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Fgsbjr A Eq Rs Ep Iiaob Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: good (used), Year of construction: 2008, - Work area 3050 x 1360 mm - Maximum loadable panel height 200 mm - N ° 1 Electrospindle 7,5 kW HSK-63 - N ° 1 horizontal Electrospindle 3 kW - 14 position tool magazine installed on the Z carriage - N ° 1 saw blade DM 180 mm 0-90 ° Fgeb Ep Ielk Egwjiasb - No. 18 independent vertical spindles - No. 4 opposing horizontal spindles in X - No. 2 opposing horizontal spindles in X - N ° 6 worktops with 18 suction cups - Xilog numerical control - 100 mc / h vacuum pump - Security system with Bumpers and perimeter networks - CE standards - suction connection DM 250 mm - required suction capacity approx. 5500 m3/h - Incl. some tools - weight approx. 3600 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Rusticating machine for wooden artefacts such as boards, profiles, beams and strip wood for flooring, with maximum width 40 or 60 cm x 30 cm high. hight adjustment via hand wheel and numerical read out brush DM 200 mm machine in CE working width 600 mm max. working height 300 mm suction DM 2 x 140 mm motor feeder 0,37 kW feeder speed variabel 3 - 20 m/min motor brushing aggregate each 4,0 kW machine weight approx 750 kg inkl. 1 steel brush DM 200 mm 1 TYNEX brush DM 200 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. Feb Epodd Hi Eo Iiajgb • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Motor power 1.2 HP, 400 V, 50 Hz Feb Epevzrams Iiasgb Speed 2800 rpm Drilling table size 650 x 330 mm Cross adjustment 300 mm Depth adjustment 150 mm Height adjustment 170 mm Table height 880 mm Weight approx. 280 kg

Condition: reconditioned (used), Veneer saw / fine-cutting saw Consoles for rear support table Pneumatic pressure beam control Extraction channel Cutting length 3050 mm Cutting height approx. 50 mm Motor power 2.2 kW 400 V, 50 Hz Saw blade diameter approx. 180 mm Dimensions approx. L x W x H = 3800 x 1000 x 1200 mm Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. Fgobjv D I Uxs Ep Iiaeb (We will only answer inquiries if you provide your address + telephone number!)

Condition: new, band saw according to CE and with the following features strong cast iron work table, inclinable balanced cast iron fly wheels saw blade guide, telescopic saw blade tensioning indication upper and lower saw blade guide Feb Ep Ijdibw Asiasgb cleaning brush for the lower fly wheel sturdy AL fences max saw blade width 16 mm suction connection under the table micro switches on machine doors work table dimensions 600 x 520 mm working table height 900 mm fly wheel DM 450 mm fly wheel speed 700 U/ min max cutting height 300 mm max cutting width 440 mm min/ max saw blade length 3690/ 3742 mm min/ max saw blade dimension 6 x 0,5 / 25 x 0,5 mm motor 3,0 kW, 3 Ph 50 Hz, 400 V suction connection 120 mm

Year of construction: 1993, Condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Feb Ejgvvn Ejp Iiajgb Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 1996, goose neck 920 mm feed speed 20 m/min veneer thickness ca. 0,4 - 2,0 mm motor 400 V, 50 Hz,, 3 PH Feb Ep Iisg Nn E Njasgb incl. manual incl. glue thread Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Year of construction: 2022, The new numerical control universal drilling machine for woodworking shops and craftsmen with very good price / performance ratio. machine incl. options: sensor for work piece calibration / measuring pressure booster for drilling spindles in Z - axis automatic lubrication system incl. SCM software "Maestro cnc" qwerty keyboard 10'' Touch Screen dDrilling head and grooving operations with 11 independent spindles and integrated blade in X direction max. workpiece dimensions X-Y-Z = 3000 x 900 x 50 mm min. workpiecedimensions X-Y-Z = 300 x 90 x 10 mm max. speed der X-Y axis 20 m/ min spindels in X-axis # 2 spindels in Y-axis # 2 spindels in Z-axis # 7 grooving unit saw blade DM 125 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. Fgeb Ep Iiefhy R Noasb (We answer your inquiries only with stated address + telephone number!)

Condition: as good as new (ex-display), Year of construction: 2023, 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. Fgob Ep Iiod Supgoaeb PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg