Used drying for sale (76)

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Equipment and technical data: - Complete drying system with trolley, high-performance radial fan, electric heater, - Air inlet and outlet flaps, safety thermostat, spray device - Lifting swivel door for convenient opening and closing of the dryer - Interior lining: all side walls are made of seawater-resistant special aluminum - The stainless steel floors are permanently resistant to aggressive wood preservatives such as tannic acid, etc. - The sealing of the connecting joints is absolutely resistant and also allows steaming in the system Hsdozk N Suspfx Achsnp - Stacking dimensions: 530 x 105 x 115 cm - Stacking volume: 6.4 m³ - External dimensions: approx. 690 x 140 x 200 cm - Heater: 12 kW - Motor: 1.1 kW / 400 V - with MP 902 control system Availability: short notice Location: 63934 Röllbach

Condition: used, machine/vehicle number: 007926, Max. working width: 1300 mm Drying system: warm air Hot air: yes vertical baskets: yes no. baskets: 48 Hnedpfx Aceyhbklohjp panels / vertical chambers: yes no. panels / vertical chambers: 2

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Hsdpfxjua D U Ij Achsnp Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Hnjdpfx Ajv Si Szechjp Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), For sale: timber drying kiln with 3 plus 3 chambers. In very good condition. Hodpfx Aey R Tdwjchsnp

Condition: excellent (used), Year of construction: 2004, machine/vehicle number: 87, functionality: fully functional, EBERL vacuum dryer, manufactured in 2004. Hodpfxjy Uc I Ho Achenp Underwent a major overhaul in 2024, performed by Eberl (purchased directly from Eberl). Fully operational, complete documentation available.

Condition: new, Year of construction: 2024, I sell the wood drying chamber Logosol WDU Including humiditiy measuring unit Elbez WHT 740 Machine NEW, not used before ! Available immeditely. Hedjzkb Rispfx Achenp

Condition: used, Year of construction: 2013, Drying chamber with false ceiling ventilation and frontal trolley loadingfor the production and conditioning of 3 mm oak lamellas, at initial moisture 12 tomax. 15 % / final humidity 7 %used, good conditionmake Mühlböcktype ZSWM2110-1180C - 1.0 l/h at 40° C over 30 % HFyear of construction 2013rated power 7 kW/15Afrequency 50 Hzcontrol voltage 24VDC/230VACprotection class IP54content:the chamber holds- 2 packages in width a 1.10 m - with 0.20 m space between each package- 1 package in height a 1.80 m - with 0.10 m thick underlays and a 0.10 m high free space- 2 packages in length a 2.20 m - plus 0.60 m free spaceThe chamber contains 4 stacking packages and has a total gross volume of 17.4 m²The chamber has a net capacity of 4 m³ of timber - with a timber thickness of 3 mm and a stacking strip thickness of 10 mmand 90 % width utilization with edged ble dimensions of each chamber: Width 2.40 m x height 2.30 m x length 5.00 m- aluminum cassette construction- aluminum frame- dimensionally stable rock wool insulation- aluminum trapezoidal sheet- snow load 100 kg/m²- 2-leaf hinged door- front loading- 2 fans a 3 kW (D=800 mm)- stainless steel/aluminum finned tube heating coil with 50 kW, flow temperature of 80 °C, return temperature 73°C- servo-controlled supply and exhaust air flaps- cold water spraying- chambers work fully automatically- computer control K5Disassembly: Customer locationhandover as viewedwithout guarantee and warranty Hnedpevwfhiofx Achjp

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 17,000 h, power: 7 kW (9.52 HP), temperature: 70 °C, inner dimension length: 6,000 mm, inner dimension width: 2,800 mm, inner dimension height: 2,500 mm, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, Incoplan DRY 6 model for sale. Capacity: 14-20 m3. Maximum wood length: 6000 mm. Bundle dimensions: 6000 mm x 120 mm x 120 mm. Number of bundles in the drying kiln: 4. Hnjdpfxjziwq Ne Achop Accessories: 8 m high chimney, manufactured in 2018. 2000 L hot water tank, manufactured in 2018. 100 kW wood-fired boiler, manufactured in 2000. The demolition is the responsibility of the buyer or seller, as agreed.

Condition: excellent (used), CTS 3G C 400* - Superheated water boiler with manual wood waste feeding Thermal output: 400,000 kcal/h. Pressure: 4 bar. Superheated water temperature: 150°C. Control thermostat, safety thermostat, thermometer. Fuel: wood waste Smoke exhaust: cyclone, forced-draught fan, connecting ductwork Steaming chamber net capacity: 100 m³/batch DVK-I 100 m³ - 1 unit, 8.5 x 9 m x h 4.3 m Control system: Baschild Italy Sliding door Oxyvent overpressure system Hnodpfx Acjw Ev Twjhjp Stainless steel tanks and radiators on 3 sides Includes turnkey connections from boiler to steaming chamber and a complete boiler room with distributor, collector, pumps, expansion vessel, etc.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Hnsdovzub Hepfx Achep Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: good (used), functionality: fully functional, Vacuum drying chamber from ISVE. ISVE control system was brought up to date in 2024, machine inspected. Hodpfexgdrbox Achsnp

Condition: excellent (used), Year of construction: 1983, Longitudinal Flow Dryer – Heating via Electricity or Hot Water Internal chamber length approx. 4500 mm Internal chamber width approx. 750 mm Internal chamber height approx. 600 mm Chamber volume 2.0 m³ Top loading – trunk design Manual / fully automatic control Electronic controller type C Longitudinal ventilation Number of fans: 1 Hsdpfx Aey Emqgochonp Fan motor power 0.55 kW, 400 V, 50 Hz Electric heater: 4.2 kW INCLUDES: Aluminum stacking strips Wood moisture measuring probe Operating manual, electrical diagram, etc. Space requirement approx. 5600 mm x 1200 mm x 1600 mm Weight: 400 kg Note on used machinery: • Technical data subject to errors and prior sale. • Quoted prices are ex-location – free loading! • Machines have been cleaned and function tested. • All machines are bought as inspected, without any warranty claims. Buyers are free to inspect the machines on site. • Special agreements only valid in written form. (We will respond to inquiries only if your address and telephone number are provided!)

Condition: like new (used), Year of construction: 2012, functionality: fully functional, year of last overhaul: 2024, very good condition, regular service done production capacity 400kg/hour complete briquetting line (RUF press already sold), Hodpfx Aexu Ryuschenp INDIVIDUAL MACHINES (price: x 1000 eur) : dryer 35 crusher / knife mill - 7 wood waste boiler 5 feeder auger 6m 6 m 3,8 belt conveyor 2 pcs 2 Stk. 2,7 sorter with hopper 4,5 screw conveyor 6 pcs 6 Stk. 6,4 exhaust fan with cyclone 1 hopper with drive 2pcs 2 Stk. 6 wrapping machine 3,5 wet sawdust tank 1 fuel tank 1

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Timber drying 3 chamber ensemble (fully functioning, used). Parameters: - length: 12,9 m - width: 8,8 m - total height: 5,2 m / usable height: 4,1 m Hot water 90°C More technical details available on demand. On site inspection and testing are possible. Hjdpfx Acszg Iw Ishonp

Year of construction: 2025, condition: new, Valmec 600 Brush Deburring Machine working width: 600 mm feed rate: 4-12 m/min motor power: 2 x 4 kW Hnsdpogk T Etsfx Achep includes two brushes: wire brush + abrasive brush independent height adjustment of the brushes power supply: 400V machine: New

Condition: new, Airplan — Modular Drying Kit for Lumber & Pallets Short Description Airplan is the simplest and most cost-effective solution for drying wood, especially softwoods. It is a ready-to-install kit designed to be mounted inside a structure you construct yourself (according to our supplied drawings), with a capacity of up to 25 cubic meters. With Airplan, you minimize your investment while achieving precise and professional drying results for lumber or pallets. What It Is Airplan is a comprehensive drying kit that includes everything required to convert a simple enclosure into a professional wood-drying chamber. We provide the structural drawing—you build the housing, install our kit, and you're ready to start drying. Main Components - 3 industrial axial fans for controlled air circulation - Electric heating element kit to ensure reliable heat supply - 2 automatic dampers for optimized air exchange and humidity regulation - Electrical control panel with drying software interface, including all necessary power and control connections - Water spray pipe with nozzles Key Benefits - Minimal capital investment—purchase only the essentials, not an entire prefabricated kiln - Reduced transport costs due to the compact kit format - Fast and straightforward installation with user-friendly operation - Professional-grade components and high-quality materials for long service life - Precise drying control suitable for both lumber and pallet production Applications - Small to medium-sized sawmills - Pallet manufacturers Hedpfxjxnbcto Achjnp - On-site drying operations where a complete kiln is not economical - Pilot installations before scaling up to larger systems What We Provide - Complete Airplan kit (see components above) - Structural drawing and installation guidelines - Basic start-up support and commissioning instructions Next Steps / Contact For a quote, technical information (electrical requirements, power ratings), or the structural drawing, please contact us with your desired drying capacity and planned enclosure dimensions. We will tailor the configuration to your needs and provide a detailed offer.

Condition: new, XPLAN is the result of nearly 50 years of Incoplan’s experience in providing a highly efficient and energy-saving method for drying wood, worldwide, in all climate conditions. Compared to conventional air exchange systems, condensation drying with XPLAN requires approximately 60% less electrical energy. This is a gentle drying method, particularly suitable for hardwoods and softwoods, allowing their characteristics to be preserved. XPLAN is available in 3 versions: LITE, up to 10 m³ STANDARD, with additional fans for tunnel structures PRO, up to 20 m³ of wood. Build or purchase your own structure, install and connect XPLAN, and start your drying process. We provide a complete design for the ideal chamber to be built, material suggestions, and all the information you need. The images show the three versions, with suggestions for the homemade chamber structure and walls. The electrical cabinet is always included and connected to the machine. The software is automatic, touchscreen-operated, and contains several preloaded drying programs. TECHNICAL DATA SPECIFICATION COMPRESSOR NOMINAL HP 1.5 kW SHIPPING WEIGHT 154 kg AUXILIARY HEAT 4 kW INTERNAL BLOWER MOTORS 0.25 kW motor; airflow 3,060 m³/h HEAT TREATING CAPABILITIES Yes, up to 71° C (only with Heat booster) CIRCULATING FANS Hnodpfx Aew Ug Atjchsp 2 included: 400 mm fans, 0.25 kW, 3,060 m³/h each POWER REQUIREMENTS 5.8 kW (28A) - 400 V 50 Hz (1-phase) DIMENSIONS (H X L X W) 94 × 83 × 52 cm (base unit only) 1 power vent system included (includes exhaust and intake) DRYING TIME 25mm Green Pine - 80% to 8% in approximately 12 days. 25mm Green Oak - 65% to 8% in approximately 35 days. LOAD CAPACITY For softwoods and fast-drying hardwoods (Pine or Poplar) 3-5 m³ For slow-drying hardwoods (Oak) 10 m³ NOMINAL WATER REMOVAL RATE 114 kg per 24 hours - 5 l/h

Condition: good (used), Code: 0389 Brand: ISVE Model: ESC JUNIOR 5 - CE Standard Vacuum dryer for drying timber planks, with top opening particularly suitable for carpenter workshops with problems of space -CE Standard Features: Top opening means that the whole length of the autoclave can be used without having to extract the carriage, thus drastically reducing the overall size The machine, operating at low temperatures, allows the timber to lose its water content without subjecting it to thermal changes which can cause cracking and warping The evaporated water which remains in suspension in the container keeps the drying material surface continuously humidified, avoiding in this way the formation of small cracks where in other drying systems is quite frequent The humidity level which is necessary between environment and material is constantly maintained by a condenser which precipitates the steam in suspension The conditioning of the drying chamber is kept constant and programmed in advance using probes connected to the heating and condensing circuits and to the timber This conditioning of the environment sets the transmigration process of the water through the cellular walls of the timber in motion. Passing from their inside walls towards the surfaces, from which the water is continuously evaporated until the desired drying conditions are reached The condensate which deposits at the bottom of the dry kiln, is periodically expelled in order to maintain the environmental conditions constant. Technical data: Capacity m³ 0,7 Power consumption 0,95 Kw Autoclave: stainless steel for drying wood containing corrosive agents (oak, chestnut, etc.) Insulating covering Shell-opening with pneumatic pistons Electric control panel with microprocessor for automatic running and stopping of drier Humidity control probes of a sample unit Automatic discharge of condensate N° 6 Aluminium electric heating plates Oil lubricated vacuum pump Hnodpfx Asy Ti Ecochsp Installed electrical power 3,6 Overall dimensions mm 5900 x 800 x 1200 h Weight kg 500 User and maintenance manual included

Condition: new, Capacity: 3 to 20 m³ — the ideal “pocket” system for small and medium-sized producers Product Description: The Mobileplan is a high-quality, fully mobile drying kiln designed for maximum versatility. Engineered for rapid deployment and user-friendly operation, it can handle all wood species and greatly simplifies both timber drying and ISPM-15 pallet heat treatment without requiring a fixed installation. Plug-and-play setup: No permanent anchoring required. Easily movable by forklift or crane. Ultra-fast installation: Delivered pre-assembled and factory-tested; ready for operation in less than one day. Fully automatic operation: Automated control of drying cycles for true set-and-forget convenience. Heating options: - Electric - Hot water / steam - Gas Key advantages: - Compact, transportable design for genuine mobility - Installation within 24 hours – reduces set-up time and labor costs - Pre-assembled unit minimizes transport and assembly expenses - Suitable for drying both softwood and hardwood, as well as ISPM-15 compliant pallet treatment - Low running costs thanks to the modular plug-and-play system - Industrial-grade reliability in a compact form factor Mobileplan is the ideal solution for professionals seeking a premium drying system that offers mobility, rapid commissioning, and low operating overheads—perfect for workshops, small sawmills, or on-site operations. Hnsdpfx Acew Hf Adjhjp

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, Display model. Like-new condition. We are selling a drying chamber powered by a high-efficiency gas burner, featuring an indirect system (no open flames) for heat exchange. Suitable for all types of wood, including softwood and hardwood, as well as pallets or firewood. Hodpfxeyyb Nys Achenp Used only occasionally for demonstrations and drying cycle tests, and is 100% functional. TECHNICAL DATA Size: 50 m3 Power supply: Fraccaro 200 kW gas burner Intended use: Pallets Firewood Hardwood Softwood Condition: Like-new Special features: Indirect flame burner for maximum safety Structure materials: Aluminum Steel Rock/GLASS wool Control system: Fully customizable Remote control Number of fans: 4 Temperature range: 20-75°C

Condition: as good as new (ex-display), Year of construction: 2018, For sale is a wood chips and sawdust drying technology with a capacity of 400 kg / hour, together with a raw material feeding system. The machine is brand new and has not been commissioned. Hjdpfotpxy Tsx Achonp

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for drying softwood and hardwood, as well as for treating pallets and wood packaging to comply with ISPM-15 standards. It ensures complete phytosanitary compliance and consistently delivers high-quality drying results for a wide range of timber types. Installation takes less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automatic – simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: Electric: 27 and 36 kW Gas: 200 kW gas burner Hot water/steam Wood stack size for EASYPLAN 10 and EASYPLAN 20: 4 m - 6 m 180 - 300 EPAL pallets Key benefits: Capacities of 10 m³ or 20 m³ to suit different production requirements Suitable for both softwoods and hardwoods Hjdpjw Hfzasfx Achenp ISPM-15 compliant pallet and wood packaging treatment, firewood drying Fully automatic drying process Quick installation in less than 24 hours Flexible heating options to match available energy sources

Condition: good (used), Year of construction: 1998, functionality: fully functional, MÜHLBÖCK drying chamber, QLSF-2x1.50-3x1.10-13.50, in good condition. Stack dimensions: l = 2 x 6.5 m + 0.5 m w = 2 x 1.5 m + 1 x 0.2 m h = 3 x 1.1 m + 3 x 0.1 m Gross stacking volume = 129 m3 Hot water heating: Heating capacity 387 kW Supply temperature 95°C Water flow rate 11 m3/h Fans: 9 x 0.75 kW with K5 control system Hodpjzcawyefx Achsnp The drying chamber can be inspected at any time by prior arrangement.

Condition: good (used), Year of construction: 2003, functionality: fully functional, inner dimension width: 1,300 mm, total length: 6,000 mm, total width: 1,900 mm, Used for cooling after painting/coating processes where the paint/coating has been heated during drying. Hodpfx Acozbau Njhenp