Condition: used, machine/vehicle number: 008702, Max. machining width: 1350 mm Bjdpfxozq Urge Adqodf Min. machining thickness: 3 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: used, machine/vehicle number: 008349, Max. machining width: 1300 mm Bdjdpjx A Tfiofx Adqjf Min. machining thickness: 100 mm Working Table: adjustable Vacuum feed belt: yes No. Operating units: 3 Nr

Condition: good (used), Modular unit, finishing unit, grinding unit, grinding station, belt sander, belt sander, edge sander, edge sanding machine, profile grinding unit, small belt sander -Belt sanding unit: from belt sanding machine -Type: unfortunately no type designations -Drum motor: Perske type DKAL 2117/2 3.7 kW 2840 rpm -Roller: Ø 183 x 370 mm -Rollers: Ø 117 x 325 mm -Individual components: see photos -Transport dimensions: 1110/560/H300 mm Bedpfjzrfb Uox Adqedf -Weight: 195 kg

Condition: used, Year of construction: 2002, Used Machine Year of Manufacture: 2002 Features and Technical Specifications: - 572 operating hours - Wide-belt automatic calibration and fine-sanding machine - Constant table feed height - Combined unit featuring a contact roller and a grinding shoe unit with an electronically controlled segmented grinding shoe - Contact roller level continuously adjustable according to grit scale - Segmented sanding shoe pneumatically adjustable - Feed table with roller support and electric adjustment via digital display - Working width: 1,100 mm - Working thickness: 3 – 160 mm - Working height: 900 mm - Motor: 11 kW - Belt drive with rotors - Feed speed: 3–15 m/min, infinitely adjustable via inverter - 2 exhaust ports, Ø=180 mm - Joystick controls - Side door with window - Dimensions: approx. 1,460 x 1,550 x 2,020 mm - Weight: approx. 180 kg Availability: approx. September 2026 Bdedpfxszq Hiwj Adqef Location: Lower Saxony

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding shoe and finish sanding Ideal sanding machine for interior finishing companies, also suitable for intermediate sanding of lacquered surfaces. Edging machine with combination unit and electronic articulated pressure bar, edge segments can be switched on and off. Segment width of the pressure bar: 35 mm. Contact roller can be pneumatically adjusted, low wear due to ribbed steel roller. Grain size compensation. Drive motor 7.5 kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s. Belt feed speed steplessly adjustable via frequency inverter from 2.5 - 13 m/min. Pneumatic workpiece-controlled belt blowing device. Cleaning brush at the outlet. Constant working height of 900 mm by adjusting the upper part of the machine, thus also suitable for integration in sanding lines. Bdedpfx Aozqvmrjdqsf Feed belt still has good grip and is in very good condition. Maximum sanding width approx. 1340 mm. Workpiece height approx. 3 to 150 mm. Common sanding belt dimension: 1360 x 1900 mm. 3 rubber-coated pressure rollers. Infeed roller table and foldable outlet table. Preparation for vacuum blower. The carpet is perforated, and connectors for an optional blower are available. Alternatively, the carpet can also be connected to the extraction system. Extraction connection: 1 x 200 mm, 1 x 140 mm, and 2 x 100 mm. Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear, edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller. CE marking. Operating manual. Without the illustrated connection cable. Original paint, only retouched in places. Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150 mm (L x W x H). Weight approx. 2400 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse; see "other offers from this provider".

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Bdedpfxoxy Tmus Adqof

Condition: used, Year of construction: 2022, Belt width: 150 mm Belt length: 3000 mm Bdedpfxszq Dczs Adqjf Table size: 960 mm x 350 mm Auxiliary table: 330 mm x 330 mm Veneer sanding device: yes Oscillation: yes Tilting sanding unit: yes Extraction port: 120 mm Motor power: 3 kW Machine length: 1910 mm Machine width: 840 mm Weight: 330 kg

Condition: used, Year of construction: 1986, Max. working width: 1300 mm Number of belts: 3-belt 1st unit: Shoe unit 1st roller diameter: 100 1st unit design: steel roller/shoe 2nd unit: roller/shoe 2nd roller diameter: 100 2nd unit design: steel roller 3rd unit: roller/shoe 3rd roller diameter: 100 mm 3rd roller design: grooved steel roller 3rd unit sanding shoe: electronic individual elements Cleaning brushes: Yes Paint sanding possible: Yes Belt blow-off: Yes Vacuum carpet: Yes Storage location: Nattheim Bdsdpfevvki Nsx Adqef

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Bdedpfxovvkips Adqsf

Condition: used, Year of construction: 1997, Number of belts: 1 belt, max. clearance height: 150 mm, max. working width: 1100 mm. 1st unit: Combination unit. 1st roller diameter: Steel roller. 1st unit design: Roller/shoe unit. 1st sanding shoe design: Electronic individual links. Segment width: 50 mm. 1st sanding belt length: 1900 mm. 1st sanding belt width: 1120 mm. Motor: 1 kW. Feed speed: 4 and 8 m/min. 2nd unit: Dust brush. Approx. weight: 2000 kg. Dimensions: 1800 x 1450 x 2120 mm. Bodpfevvkkaox Adqodf Storage location: Nattheim

Condition: used, Year of construction: 2022, Oscillating cylindrical grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. It uses something similar to a ProLoc device. Location: Nattheim. Bsdpfswhqprox Adqodf

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine from Ecoline. Technical specifications: A possible screw variant for tightening the spindle sleeve. A device similar to the ProLoc system is used. Location: Nattheim. Bdedpfxewhqple Adqsf

Condition: new, The new cylinder brush and sanding machine from Holzprofi Maker can be quickly and easily converted from a sanding machine to a brushing machine in just a few seconds. It is ideal for smaller workshops as it combines two machines in one. Advantages and Features: - Versatile options for surface finishing - Quick and easy changeover from sanding to brushing - Many different brushes available for a wide range of effects and processing possibilities - Infinitely variable feed rate and roller speed for perfect results - Workpiece width up to approx. 1100 mm - Precise adjustment of sanding height for consistent results Technical Data: Sanding width: 560 mm (1120 mm) Sanding height: 3 to 75 mm Roller diameter: Ø132 mm Table dimensions: 592x530 mm Extension table dimensions (2x): 582x245 mm Roller speed: 0 to 1800 rpm Feed speed: 0 to 7.5 m/min Extraction port diameter: 100 mm Main motor power: 1.5 kW Feed motor power: 120 W Voltage: 230 V Dimensions: 1010x1060x1190 mm Bdedpfxewzzivo Adqef Weight: 155 kg Optional Accessories: Texturing brush for even and structured surfaces Abrasive flap brush for finishing and surface preparation tasks Steel wire brush for a used-look finish and pronounced grain effect

Condition: excellent (used), Catalog number: 8047 TECHNICAL DATA - max. width of the workpiece: 1100mm - max. height of the workpiece: 160mm – Top: - 2 sliding metal rollers - unit: grooved rubber roller + shoe + metal roller - sliding rubber roller – Bottom: - sliding rubber roller - conveyor belt - sliding rubber roller - pneumatic belt oscillation - stepless feed speed adjustment - electric machine body lifting - pneumatic brake - total power: 10.5kW - operating pressure: 6-8 bar - diameter of the dust extraction nozzle: 190mm - dimensions (L/W/H): 1470x1540x2000mm – weight: 1260kg ADVANTAGES - Made in Germany - Single-head grinder with a 1100mm wide shoe - Unpainted – used grinder, very good condition Net price: 19900 PLN Net price: 4740 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to exchange rate fluctuations) Bdedpfxjzp N Hie Adqof

Condition: excellent (used), Catalog number 7828 TECHNICAL DATA - max. width of workpiece: 200 mm - max. height of workpiece: 180 mm - 2 sanding units: - top: metal roller + sanding shoe + metal roller - bottom: metal roller + sanding shoe + metal roller - top: - 2 pressure rollers, rubber, pulling type - sanding unit - 2 pressure rollers, rubber, pulling type - bottom: - sanding unit - side guide strip - electrically adjustable sanding height, 0.37 kW - 6 feed speed settings + right/left: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor: 0.75 kW - main motors: 2 x 4 kW - diameter of dust extraction nozzles: 80 mm - overall dimensions (L/W/H): 1500x740x1600 mm - weight: 560 kg ADVANTAGES - Made in Germany - 2 sanding units - Unpainted - DTR documentation - Used sander, very good condition Net price: 10900 PLN Net price: 2600 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to higher fluctuations) Bdsdpfxszp N Ero Adqsf

Condition: excellent (used), CATALOGUE NUMBER 8046 Technical data: - max width of workpiece 900mm - max height of workpiece 160mm 2 units: 1) ribbed rubber roller for calibrating 2) rubber roller + shoe + metal roller – from above: - rubber roller, slip roller I unit - 2x rubber roller, slip roller II unit - slip roller, rubber roller, smooth – from below: - conveyor belt - pneumatic belt oscillation - 2 types of feed speed 0.55kW - electric table lifting - main motor 7.5kW - working pressure 6-8 bar - diameter of dust extraction nozzle 2x160mm - dimensions L/W/H 1300x1500x1950mm - weight 1100kg Bdodpfx Aszp N A Dodqjf Advantages: – Italian production, – unpainted – used grinder, very good condition Net price: 28900 PLN Net price: 6890 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. Bedpfx Ajw Av Ivedqjdf The SA380 brush sanding machine offers the following advantages: 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 3 h, type of input current: three-phase, overall weight: 135 kg, extraction nozzle diameter: 125 mm, input voltage: 400 V, This small Ceetec module can be used in combination with all Ceetec A250 brush painting machines in order to create a better adhesion on e.g. Larch wood in compination with thick paint. It can also be used with nylon brushes to clean the sawn wood before painting in order to keep out the dirt. Recommended to use in combination with a small exhaustion unit. Comes without brushing head and sanding material, can be added on request. Bdjdpfxefiugqs Adqjf Do You have further questions? Please feel free to contact us whenever You want!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, product height (max.): 100 mm, space requirement height: 1,750 mm, space requirement length: 1,200 mm, input frequency: 50 Hz, workpiece weight (max.): 300 kg, Equipment: type plate available, Alpha Brush KS-WBM Sanding Machine, Texture Brushing Machine This machine gives surfaces, such as profile boards for facades or wall cladding, a noticeably more sophisticated and rustic look! With up to 400 mm working width and customizable configuration for both softwoods and hardwoods, this machine is a versatile tool for carpentry workshops, planing mills, or joineries. Bjdpsw Avrhefx Adqjdf We offer not only the texture brushing machine itself, but also the appropriate extraction unit and a variety of brush heads to equip the machine, allowing you to achieve your desired effect on wooden surfaces. In addition to this sanding automaton, we also supply coating machines that allow you to stain or finish boards and panels in one step. Do you have questions? We are happy to advise you individually on your requirements.

Condition: new, Year of construction: 2025, Ceetec A/S produces since 1970 wood painting machines in Norre Aaby, Denmark. According to the motto "keep it simple" all machines are reduced to necessary things combined with innovative technology where it makes sense for our customer. This makes our machines very long living but also very cost effective for the customer. Our innovative drying systems are available in longitudinal and transversal version and can be combined with all our painting machines. Bedpfx Adoffc Ufsqedf We can also add IR-stripes for faster drying apart from the hot air drying (heated by hot water). You are interested and want to see a line working? No problem, we will organize a visit at another customer for You. The machines will be configured and build according to the wishes of You. Delivery time on request. Do You have further questions? Please feel free to contact us whenever You want!

Condition: excellent (used), Bargain: Steel roller with 50 HP engine, hydraulically adjustable roller, only 600 operating hours. Bedpszpyggofx Adqodf

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Extraction nozzle: 120 mm (diameter) Belt speed: 17 m/s Belt length x belt width: 2515 x 150 mm Bdsdjznvd Sjpfx Adqof Weight: 240 kg Height adjustment: 0–150 mm Table length: 950 mm Motor power: 3.0 HP (2.2 kW) Motor voltage: 3 x 400 V Tilting angle: 90° – 45° Sanding belt width: 150 mm Sanding belt length: 2515 mm Diameter: 110 mm

Condition: new, Holzprofi Maker oscillating edge sander, a robust sanding machine for trades and industry: - Processed steel back plate - Graphite support - Table made of solid machine cast iron - Table height adjustable and grooved - 90° pivoting sanding head - Miter fence and rounding sanding table included as standard Technical data: Belt dimensions: 2260 x 150 mm Motor output S1: 2.2 kW, 400 V Table length: 750 mm Table width: 250 mm Belt speed: 16 m/sec Space requirement: 1325 x 570 mm Dust extraction connection: 100 mm Weight: 156 kg Bdsdpfxozqrwgj Adqjf

Condition: used, Year of construction: 1994, Grinding length: 2600 mm Grinding width: 850 mm Bdedpfx Aezg Nawodqsf Dust extraction nozzle diameter: 180 mm Motor: 4 kW Speed: 1430 rpm Belt speed: 22 m/s Weight: approx. 700 kg Location: Customer

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW Bodpfjylp A Djx Adqsdf weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m