Used Destacking device for sale (65)

Year of construction: 2012, Condition: ready for operation (used), Machine no: 483 Year of manufacture: 2012 Technical data Belt length: 3900 mm Belt width: 1350 mm Total width: 1900 mm Max weight on belt: 400 kg Bws Ijv Rpxfsa Unxiol Motor: 0.37 kW, 50 Hz, 380 V, 3-phase Stock number: 2002452BXA

Condition: excellent (used), Year of construction: 2017, Vacuum lifter from Schmalz for heavy panels with new suction cup rubber. Load capacity 150 kg horizontally and vertically. Suction cup can be motor-pivoted 90 degrees. Suction box 1000 x 675 mm. Acoustic warning signal if vacuum is too low. 400 V, 1.5 kW. Can be attached to an on-site chain hoist. CE mark. No inspection booklet available. Suction cup rubber replaced. Bs Ia Usv S Synjnxiewl As good as new. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See "Other offers from this supplier."

Year of construction: 2007, Condition: used, Extra-flat lifting table Load capacity 1250kg Bwo Ia Uewfh Tcenxijl 2 units available 380V

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Bwj Ia Unjwbp Nwexiel Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: like new (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, frequency: 50 Hz, LITTLE BUFFER TABLE PERFECT CONDITION (Can be converted for other side) Bws Iaowcp Ehj Unxiel Option Conveyor belt 4m

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Pinomatic cross conveyor for a planing and sawing line Year of manufacture: 2001 Bo Ia Unxov S Hfxoiswl Manufacturer: Pinomatic OY Type: POS 9+10 S/N: P1033 Motor-driven cross conveyor with 7 chain hoists Arm length: 6000mm Cross conveyor width: up to 4000mm (adjustable) Height: 900mm 6 fixed chain hoists 1 adjustable chain hoist Voltage: 230/400VAC

Condition: good (used), Automatic board stacker for use after a moulder, resaw, crosscut, double end tenoner etc. Pack size up to 6,5m x 1,2m x 1,2m high. Be Ia Unjr E A Euoxiowl Capable of stacking 10 layers per minute.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 031001-1, 3 Sicko STM 80 stacking units Data see photos (data sheet) Bo Iaeumxb Rj Unxiowl If you have any questions, please contact Mr. Klaus Schmidt by telephone only.

Condition: used, Automatic stacker Motorized feed rollers Coin counter 380V Bwo Iewfh Rzea Unxijl

Condition: excellent (used), STACKER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms Bj Iast Ty A Ae Unxiswl No. 2 Out-side rollers way (on ground) to out-feed pile of panels from the Unloader/Stacker No. 1 Out-side motorized rollers table (which brings panels to the Unloader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 80

Condition: ready for operation (used), Tilt destacking for layer separation Bo Ia Usuzht Tenxiswl Stacking lath separator with conveyor belt Layer transport to the layer buffer Layer buffer with separation before feeding unit Layer patterns for the two separated timbers including transfer belts, for example to the stacking machine

Year of construction: 2017, Condition: excellent (used), Return System for panels durable...customized...space-saving...low maintenance The intelligent solution for returning the panels around the edge banding of all manufacturers Working fild L 9 500 mm. x W 6 500 mm.. Functions: Workpiece recirculation Rotation 0° - 90° - 180° Parts measurement Destacking function incl. stacking building (only Return 02) Manual mode for oversize-panels Parts dimension Largest part 4100 x 1300 mm Smallest part 300 x 80 mm. Load max 150 KG *The surface must be smooth, closed, impermeable and without cutouts! Energy supply Electricity 400V / 20 Amps. Pressure air 300 - 420 NL/min Bs Ia Uov Raggenxiewl System properties Stacking height 800 mm. Movement speed up to 120 m/min Cycle time - max. 8 cycles/min; transport from removal station to return belt lower cycle times in case of destacking. 3-axis manipulator for part transport with vacuum cycle time: 8 - 15 seconds depending on travel distance pick up with suction pads - max. 150kg movings: turning 0° - 90° - 180° pick up of parts and delivery on belt conveyors or roller conveyors stacking possible colour: RAL 7035 portal lenght 9,5 m steel construction to support bridge, incl. Steel posts and crane runway, energy supply via energy chain and installation material Cgs2Kb3Bqi portal width 6,5 m bridge made of aluminium profile, with double sided tooth belt drive, master/slave control incl. Energy supply via energy chain. Made by Barbaric Made in Austria The company has now changed the lay-out therefore this Barbaric stacker is not needed any longer. The machine can be inspected at any time here in Norway. New price in 2017 was 198 000 euro. Now only 30 000 euro. Excellent condition. Request more information DOCUMENTS 17776136.docx (Word)

Year of construction: 2024, Condition: as good as new (ex-display), Weinig Stacker for long boards Be Ia Unxeunaw Nsiewl Min length 1500mm Max Length 6000mm Machine is under total rebuilding and will be like new. All hydraulic Systems are changed to Electric motors New control panel sand blasted and repainted. Machine comes with brick stacking option Work in progress New photos as i get along.

Condition: used, Year of construction: 2010, machine/vehicle number: 13820, - Manufacturer MAKOR - Type. CSRT, Loader - Year of construction 2010 - Max. Part width 180 mm - Min. part length ~ 1,000 mm - Max. Part length ~ 6.500 mm - Length of the longitudinal conveyors ~ 6500 mm - Distance between the lifting rakes centre - centre 400/530/700/770/1150/1270 mm - Length ~ 6.500 mm - Weight 750 kg - Incl. control unit - In stock in Blomberg Be Ia Unxsumvtwsiswl

Condition: good (used), Lenght with arm at 0 point 0 - 3400 mm Be Ia Unxov Nzgleiowl Lenght with arm max opened - 4100 mm Width 1400 mm Weight 1000 kg

Condition: excellent (used), TURNING DEVICE FOR PANELS (FROM CROSSWISE TO LENGTHWISE) Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from cross sense (cross-wise) to longitudinal sense (length-wise) Built-in electric and command panel 1st Table (crosswise) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (lengthwise) with motorized rollers Min dimensions of the panels (mm) 250 x 320 (ca.) Max dimensions of the panels (mm) 1300 x 2100 (ca.) Bwj Ia Unxofi Tmtsiel Min/Max thickness of the panels mm 10 / 50 (ca.) Total installed motor power Kw 3,5 (ca.) Total length of the machine mm 3300

Condition: used, Year of construction: 2013, Angle transfer 180°, manufacturer Venjakob VEN TRANS Technical data:- Type. VEN TRANS - Manufacturer: Venjakob - Year of construction:2013 - Max. part length: 5.500mm Bj Ia Uouu Shysnxijwl (part length 6,000mm on request) - Infeed roller conveyor Length: 6100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Infinitely variable feed rate - Cross transfer with carriage and lifting rake - Lifting-lowering, pneumatic - Length of transfer arms: 4600 mm - Number of rakes: 43 pieces - Distance between the rakes 140 mm - Outfeed roller conveyor Length: 6,100 mm Roller width: 1400 mm Roller diameter: 60 mm Pitch: 140 mm Feed infinitely variable - Connected loads: - Electrical: 400 V, 50 Hz, 3 phases - Location: At the warehouse in D-32825 Blomberg

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Bs Ia Ujfi Trionxiswl Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric cabinet and command panel Total installed motor power KW 3,5 (ca.) 1st table (longitudinal) with motorized rollers Motorized turning device, with double cone (1 top + 1 bottom) 2nd table (cross) with motorized rollers Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 2100 (ca.) Min/Max thickness of the panel mm 10 / 50 (ca.) Total length mm 5680

Condition: excellent (used), LOADER (SINGLE-CAGE) Vacuum system with its pump Top holding bar deplacement (pivoting) of 180° Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting Be Ia Unjd Tywgsxijwl In-side lifting table, surface with motorized-rollers Front-side sliding door (metal grid) to introduce the stack of the panels Separated electric and command panel Outside rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), Working capacity (cycles/min): 12-15 Min/Max panels thickness mm 10 - 40 Min dimensions of the panels mm 250 x 320 (estimated) Max dimensions of the panels mm 1200 x 3000 Total installed motor power KW 11

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels Bwo Ia Unxsd Tyvxeisl - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 11

Condition: excellent (used), To automatically turn up-side-down (180°) the workpieces (stack of panels) Entry and exit of the panels in the longitudinal direction Manages one stack of panels per time Bo Ia Uogvpn Ionxijwl Min/Max thickness of the stack mm 1000 / 1600 Working width (min/max) mm 300 / 1300 Useful working length (min/max) mm 500 (min) / 3000 Separate electric and command panel Total installed motor power Kw 4,3

Condition: excellent (used), UNLOADER (BRIDGE-FRAME) WITH DOUBLE STORAGE STATION Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arm with vacuum cups, adjustables N. 2 Out-side rollers way (on gound) to out-feed pile of panels from the Unloader N. 1 Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°). Dimensions mm 7168 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Bwe Ia Uod Rg Dzsnxiel Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 20.8

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Bwe Ia Ued Siydonxijl Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beams No. 2 Horizontal top supporting beams (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Horizontal metal arms with vacuum cups, adjustables OPTIONAL No. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader Bwo Ia Usflc T Ssnxiel No. 1 Motorized rollers table (which receives panels from the Loader) Separate electric and command panel Electronic Programmer Perimetral safety metal grids Total installed motor power Kw 17,7 Working capacity (cycles/min) 16-20 (ca.) Min/Max panels thickness mm 10-50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3000 (ca.)

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms Bs Ia Uod Rg Dponxiowl N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3